SDG 9 - Industry, innovation and infrastructure

Build resilient infrastructure, promote inclusive and sustainable industrialization and foster innovation

Resilient infrastructure and sustainable industrialization

Thousands of IEC International Standards support the development and implementation of sustainable quality infrastructure in all industries where electrical and electronic devices and systems can be found. They provide confidence to regulators, buyers and consumers that devices and systems are safe, can interoperate, and are built to industry-wide agreed levels of quality and reliability. IEC work also encourages innovation and technology transfer, helps reassure investors and insurers that global best practice has been applied, in design, manufacturing, installation, maintenance and repair, including in terms of sustainability.

88 IEC TC/SCs, 4 IEC SyCs and all 4 IEC CA Systems contribute to SDG 9.

iec_for_sdgs-cover.jpg

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

IEC work addresses topics related to industry, innovation and infrastructure

Global trade

Global trade

Innovation

Innovation

Energy access

Energy access

Hazardous materials and waste control

Hazardous materials and waste control

Quality management

Quality management

Information technology

Information technology

Lighting

Lighting

Environment

Environment

Risk management

Risk management

Artificial intelligence

Artificial intelligence

Energy storage and batteries

Energy storage and batteries

Knowledge transfer

Knowledge transfer

Safety

Safety

Energy efficiency

Energy efficiency

IEC work directly impacts the following SDG targets

9.1 Develop quality, reliable, sustainable and resilient infrastructure, including regional and transborder infrastructure, to support economic development and human well-being, with a focus on affordable and equitable access for all

Many IEC International Standards from many IEC TC/SCs apply to the development of resilient infrastructure, including for example in power generation, water management, transportation or healthcare. They ensure the general safety and interoperability of devices and systems and provide businesses and consumers with access to a global market of products and suppliers.

  • IEC TC 2: Rotating machinery;
  • IEC TC 3 and 2 SCs: Information structures and elements, graphical symbols, product properties and classes;
  • IEC TC 5: Steam turbines;
  • IEC TC 9: Electrical equipment and systems for railways;
  • IEC TC 14: Power transformers;
  • IEC TC 21 and 1 SC: Secondary cells and batteries;
  • IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
  • IEC TC 26: Electric welding;
  • IEC TC 27: Industrial electroheating and electromagnetic processing;
  • IEC TC 31 and 3 SCs: Equipment for explosive atmospheres;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC TC 35: Primary cells and batteries;
  • IEC TC 46 and 3 SCs: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
  • IEC TC 47 and 4 SCs: Semiconductor devices (sensors);
  • IEC TC 48 and 2 SCs: Electrical connectors and mechanical structures for electrical and electronic equipment;
  • IEC TC 49: Piezoelectric, dielectric and electrostatic devices;
  • IEC TC 51: Magnetic components;
  • IEC TC 55: Winding wires;
  • IEC TC 56: Dependability;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC TC 68: Magnetic alloys and steels;
  • IEC TC 69: Electric road vehicles and industrial trucks;
  • IEC TC 73: Short circuit currents;
  • IEC TC 77 and 3 SCs: Electromagnetic compatibility;
  • IEC TC 82: Solar photovoltaic energy systems;
  • IEC TC 89: Fire hazard testing;
  • IEC TC 100/TA 19: Environmental and energy aspects for multimedia systems and equipment;
  • IEC TC 101: Electrostatics;
  • IEC TC 111: Environmental standardization;
  • IEC TC 115: High voltage direct current (HVDC) transmission for DC voltages above 100 kV;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 100: Audio, video and multimedia systems and equipment, in particular, IEC SyC LVDC: Low voltage direct current installations and electricity access;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.

9.4 Upgrade and retrofit clean and environmentally sound technologies and industrial processes

Many IEC technical committees produce standards that allow for the upgrading and retrofitting of technologies in sectors such as energy generation and transmission, electric motors, railways, shipping, buildings, cities, manufacturing processes, lighting, and more.

  • IEC TC 2: Rotating machinery;
  • IEC TC 3 and 2 SCs: Information structures and elements, graphical symbols, product properties and classes;
  • IEC TC 5: Steam turbines;
  • IEC TC 9: Electrical equipment and systems for railways;
  • IEC TC 14: Power transformers;
  • IEC TC 21 and 1 SC: Secondary cells and batteries;
  • IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
  • IEC TC 26: Electric welding;
  • IEC TC 27: Industrial electroheating and electromagnetic processing;
  • IEC TC 31 and 3 SCs: Equipment for explosive atmospheres;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC TC 35: Primary cells and batteries;
  • IEC TC 46 and 3 SCs: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
  • IEC TC 47 and 4 SCs: Semiconductor devices (sensors);
  • IEC TC 48 and 2 SCs: Electrical connectors and mechanical structures for electrical and electronic equipment;
  • IEC TC 49: Piezoelectric, dielectric and electrostatic devices;
  • IEC TC 51: Magnetic components;
  • IEC TC 55: Winding wires;
  • IEC TC 56: Dependability;
  • IEC TC 57: Power systems management and associated information exchange;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 65 and 4 SCs: Industrial-process measurement, control and automation;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC TC 68: Magnetic alloys and steels;
  • IEC TC 69: Electric road vehicles and industrial trucks;
  • IEC TC 72: Automatic electrical controls;
  • IEC TC 73: Short circuit currents;
  • IEC TC 77 and 3 SC: Electromagnetic compatibility;
  • IEC TC 82: Solar photovoltaic energy systems;
  • IEC TC 89: Fire hazard testing;
  • IEC TC 100/TA 19: Environmental and energy aspects for multimedia systems and equipment;
  • IEC TC 101: Electrostatics;
  • IEC TC 111: Environmental standardization;
  • IEC TC 115: High voltage direct current (HVDC) transmission for DC voltages above 100 kV;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 100: Audio, video and multimedia systems and equipment, in particular, IEC TC 91: Electronics assembly technology;
  • IEC TC 107: Process management for avionics;
  • IEC TC 110: Electronic display devices;
  • IEC SyC LVDC: Low voltage direct current installations and electricity access;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • IEC SyC SM: Smart manufacturing;
  • ISO/IEC JTC 1: Information technology;
  • ISO/IEC JTC 1/SC 7: Software and systems engineering;
  • ISO/IEC JTC 1/SC 39: Sustainability for and by information technology;
  • ISO/IEC JTC 1/SC 42: Artificial intelligence.

9.5 Upgrade the technological capabilities of industry sectors

IEC work provides metrics, specifications, processes and methodologies that help upgrade technological capabilities of industry. They help determine safety, efficiency, resilience and performance levels. The members of the IEC CA Systems verify and certify that upgraded technologies meet international standards.

  • IEC TC 3 and 2 SCs: Information structures and elements, graphical symbols, product properties and classes;
  • IEC TC 56: Dependability;
  • IEC TC 57: Power systems management and associated information exchange;
  • IEC TC 59 and 7 SCs: Performance of electrical appliances;
  • IEC TC 61 and 5 SCs: Safety of electrical appliances;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 65 and 4 SCs: Industrial-process measurement, control and automation;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC TC 70: Degrees of protection by enclosures;
  • IEC TC 72: Automatic electrical controls;
  • IEC TC 76: Optical radiation safety and laser equipment;
  • IEC TC 91: Electronics assembly technology;
  • IEC TC 107: Process management for avionics;
  • ISO/IEC JTC 1: Information technology;
  • ISO/IEC JTC 1/SC 7: Software and systems engineering;
  • ISO/IEC JTC 1/SC 39: Sustainability for and by information technology;
  • ISO/IEC JTC 1/SC 42: Artificial intelligence;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.

9.A Facilitate sustainable and resilient infrastructure development

IEC systems committees on smart cities, smart manufacturing and smart energy coordinate the work of dozens of IEC TCs and outside stakeholders to ensure that infrastructure is both sustainable and resilient to environmental and manmade challenges. The use of
IEC International Standards encourages innovation and together with testing and certification provides the tools to benchmark it with competitive solutions.

  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • IEC SyC SM: Smart manufacturing;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications;

9.B Support domestic technology development and innovation

Through the adoption and use of IEC International Standards and participation in IEC CA Systems every one of the 173 countries in the IEC family has access to world best-practice and high-level expert consensus.

  • IEC TC 59 and 7 SCs: Performance of electrical appliances;
  • IEC TC 61 and 5 SCs: Safety of electrical appliances;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications.

9.C Increase access to information and communications technology

IEC work in standardization and conformity assessment forms the basis for the digitalization of industry and society. From sustainable and reliable energy access, to power network communication, industrial automation, the Internet of Things, wearable devices, information and communication technology in offices, administrations and academia, IEC work in standardization and conformity assessment is essential for information and communication technology hardware and software.

  • IEC TC 3 and 2 SCs: Information structures and elements, graphical symbols, product properties and classes;
  • IEC TC 57: Power systems management and associated information exchange;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 100: Audio, video and multimedia systems and equipment, in particular, IEC TC 110: Electronic display devices;
  • ISO/IEC JTC 1: Information technology;
  • ISO/IEC JTC 1/SC 7: Software and systems engineering;
  • ISO/IEC JTC 1/SC 39: Sustainability for and by information technology;
  • ISO/IEC JTC 1/SC 42: Artificial intelligence.

 

Anchor placeholder #data
  • Publications
  • Projects

Reference

Language

TC/SC

CISPR 11:2015
Edition 6.0 (2015-06-09)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

EN-FR

CISPR/CIS/B

CISPR 11:2015/AMD1:2016
Edition 6.0 (2016-06-23)
Amendment 1 - Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

EN-FR

CISPR/CIS/B

CISPR 11:2015/AMD2:2019
Edition 6.0 (2019-01-18)
Amendment 2 - Industrial scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

EN-FR

CISPR/CIS/B

CISPR 12:2007+AMD1:2009 CSV
Edition 6.1 (2009-03-10)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

EN-FR

CISPR/CIS/D

CISPR 12:2007
Edition 6.0 (2007-05-23)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

EN-FR, ES

CISPR/CIS/D

CISPR 12:2007/AMD1:2009
Edition 6.0 (2009-01-12)
Amendment 1 - Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

EN-FR, ES

CISPR/CIS/D

CISPR 14-1:2020
Edition 7.0 (2020-09-07)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

EN-FR, EN, ES

CISPR/CIS/F

CISPR 14-2:2020
Edition 3.0 (2020-08-31)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

EN-FR, EN, ES

CISPR/CIS/F

CISPR 15:2018
Edition 9.0 (2018-05-15)
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN-FR, ES

CISPR/CIS/F

CISPR 15:2018/ISH1:2019
Edition 9.0 (2019-11-14)
Interpretation Sheet 1 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

EN

CISPR/CIS/F

CISPR 16-1-1:2019
Edition 5.0 (2019-05-22)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

EN-FR

CISPR/CIS/A

CISPR 16-1-2:2014
Edition 2.0 (2014-03-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-1-2:2014/AMD1:2017
Edition 2.0 (2017-11-07)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-1-3:2004
Edition 2.0 (2004-06-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR, EN, FR, ES

CISPR/CIS/A

CISPR 16-1-3:2004/COR1:2006
Edition 2.0 (2006-02-09)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR

CISPR/CIS/A

CISPR 16-1-3:2004/AMD1:2016
Edition 2.0 (2016-03-31)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR, ES

CISPR/CIS/A

CISPR 16-1-3:2004/AMD2:2020
Edition 2.0 (2020-01-28)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

EN-FR, ES

CISPR/CIS/A

CISPR 16-1-4:2019
Edition 4.0 (2019-01-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-1-4:2019/AMD1:2020
Edition 4.0 (2020-06-15)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-1-5:2014
Edition 2.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

EN-FR

CISPR/CIS/A

CISPR 16-1-5:2014/COR1:2020
Edition 2.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

EN-FR

CISPR/CIS/A

CISPR 16-1-5:2014/AMD1:2016
Edition 2.0 (2016-12-16)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

EN-FR

CISPR/CIS/A

CISPR 16-1-6:2014
Edition 1.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

EN-FR

CISPR/CIS/A

CISPR 16-1-6:2014/AMD1:2017
Edition 1.0 (2017-01-13)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

EN-FR

CISPR/CIS/A

CISPR 16-1-6:2014/AMD2:2022
Edition 1.0 (2022-03-03)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

EN-FR

CISPR/CIS/A

CISPR 16-2-1:2014
Edition 3.0 (2014-02-26)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-1:2014/COR1:2020
Edition 3.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-2-1:2014/AMD1:2017
Edition 3.0 (2017-06-30)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-2:2010
Edition 2.0 (2010-07-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-3:2016
Edition 4.0 (2016-09-15)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

EN-FR, ES

CISPR/CIS/A

CISPR 16-2-3:2016/AMD1:2019
Edition 4.0 (2019-06-25)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

EN-FR

CISPR/CIS/A

CISPR 16-2-4:2003
Edition 1.0 (2003-11-20)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

EN-FR, ES

CISPR/CIS/A

CISPR TR 16-2-5:2008
Edition 1.0 (2008-07-09)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-5: In situ measurements for disturbing emissions produced by physically large equipment

EN

CISPR/CIS/H

CISPR TR 16-3:2020
Edition 4.0 (2020-10-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports

EN

CISPR/CIS/A

CISPR TR 16-4-1:2009
Edition 2.0 (2009-02-23)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

EN

CISPR/CIS/A

CISPR 16-4-2:2011
Edition 2.0 (2011-06-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR, ES

CISPR/CIS/A

CISPR 16-4-2:2011/COR1:2013
Edition 2.0 (2013-04-11)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrument uncertainty

EN-FR

CISPR/CIS/A

CISPR 16-4-2:2011/AMD1:2014
Edition 2.0 (2014-02-14)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR, ES

CISPR/CIS/A

CISPR 16-4-2:2011/AMD2:2018
Edition 2.0 (2018-08-15)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR, ES

CISPR/CIS/A

CISPR 16-4-2:2011/AMD2:2018/COR1:2019
Edition 2.0 (2019-01-16)
Corrigendum 1 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

EN-FR

CISPR/CIS/A

CISPR TR 16-4-3:2004+AMD1:2006 CSV
Edition 2.1 (2007-01-18)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

EN

CISPR/CIS/A

CISPR TR 16-4-3:2004
Edition 2.0 (2004-05-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

EN

CISPR/CIS/A

CISPR TR 16-4-3:2004/AMD1:2006
Edition 2.0 (2006-10-17)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

EN

CISPR/CIS/A

CISPR TR 16-4-4:2007
Edition 2.0 (2007-07-16)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

EN

CISPR/CIS/H

CISPR TR 16-4-4:2007/AMD1:2017
Edition 2.0 (2017-06-29)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services calculation of limits for the protection of radio services

EN

CISPR/CIS/H

CISPR TR 16-4-4:2007/AMD2:2020
Edition 2.0 (2020-04-23)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

EN

CISPR/CIS/H

CISPR TR 16-4-5:2006
Edition 1.0 (2006-10-25)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

EN

CISPR/CIS/A

CISPR TR 16-4-5:2006/AMD1:2014
Edition 1.0 (2014-07-21)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

EN

CISPR/CIS/A

CISPR TR 16-4-5:2006/AMD2:2021
Edition 1.0 (2021-10-29)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

EN

CISPR/CIS/A

CISPR 17:2011
Edition 2.0 (2011-06-10)
Methods of measurement of the suppression characteristics of passive EMC filtering devices

EN-FR, ES

CISPR/CIS/A

CISPR TR 18-1:2017
Edition 3.0 (2017-10-27)
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena

EN

CISPR/CIS/B

CISPR TR 18-2:2017
Edition 3.0 (2017-10-27)
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 2: Methods of measurement and procedure for determining limits

EN

CISPR/CIS/B

CISPR TR 18-3:2017
Edition 3.0 (2017-10-27)
Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise

EN

CISPR/CIS/B

CISPR 25:2021
Edition 5.0 (2021-12-16)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

EN-FR

CISPR/CIS/D

CISPR TR 28:1997
Edition 1.0 (1997-04-16)
Industrial, scientific and medical equipment (ISM) - Guidelines for emission levels within the bands designated by the ITU

EN-FR

CISPR/CIS/B

CISPR TR 29:2020
Edition 2.0 (2020-05-07)
Television broadcast receivers and associated equipment - Immunity characteristics - Methods of objective picture assessment

EN

CISPR/CIS/I

CISPR TR 30-1:2012
Edition 1.0 (2012-08-24)
Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps

EN

CISPR/CIS/F

CISPR TR 30-2:2012
Edition 1.0 (2012-08-24)
Test method on electromagnetic emissions - Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps

EN

CISPR/CIS/F

CISPR TR 31:2012
Edition 2.0 (2012-09-18)
Database on the characteristics of radio services

EN-FR

CISPR/CIS/H

CISPR 32:2015
Edition 2.0 (2015-03-31)
Electromagnetic compatibility of multimedia equipment - Emission requirements

EN-FR, ES

CISPR/CIS/I

CISPR 32:2015/COR1:2016
Edition 2.0 (2016-06-28)
Corrigendum 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements

EN-FR

CISPR/CIS/I

CISPR 32:2015/AMD1:2019
Edition 2.0 (2019-10-01)
Amendment 1 - Electromagnetic compatibility of multimedia equipment - Emission requirements

EN-FR, ES

CISPR/CIS/I

CISPR 35:2016
Edition 1.0 (2016-08-16)
Electromagnetic compatibility of multimedia equipment - Immunity requirements

EN-FR

CISPR/CIS/I

CISPR 36:2020
Edition 1.0 (2020-07-22)
Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz

EN-FR

CISPR/CIS/D

IEC 60028:1925
Edition 2.0 (1925-01-01)
International standard of resistance for copper

EN-FR

TC 7

IEC 60034-1:2022
Edition 14.0 (2022-02-14)
Rotating electrical machines - Part 1: Rating and performance

EN-FR

TC 2

IEC 60034-2-1:2014
Edition 2.0 (2014-06-27)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

EN-FR

TC 2

IEC 60034-2-2:2010
Edition 1.0 (2010-03-16)
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

EN-FR

TC 2

IEC 60034-2-3:2020
Edition 1.0 (2020-03-19)
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

EN-FR

TC 2

IEC 60034-3:2020
Edition 7.0 (2020-05-26)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

EN-FR

TC 2

IEC 60034-4-1:2018
Edition 1.0 (2018-04-27)
Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests

EN-FR

TC 2

IEC 60034-5:2020
Edition 5.0 (2020-04-29)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

EN-FR, EN

TC 2

IEC 60034-6:1991
Edition 2.0 (1991-10-01)
Rotating electrical machines - Part 6: Methods of cooling (IC Code)

EN-FR, ES

TC 2

IEC 60034-7:2020
Edition 3.0 (2020-10-07)
Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

EN-FR

TC 2

IEC 60034-8:2007
Edition 3.0 (2007-06-22)
Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-8:2007/AMD1:2014
Edition 3.0 (2014-03-20)
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-9:2021
Edition 5.0 (2021-10-14)
Rotating electrical machines - Part 9: Noise limits

EN-FR

TC 2

IEC 60034-11:2020
Edition 3.0 (2020-10-05)
Rotating electrical machines - Part 11: Thermal protection

EN-FR

TC 2

IEC 60034-12:2016
Edition 3.0 (2016-11-23)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

EN-FR

TC 2

IEC 60034-14:2018
Edition 4.0 (2018-08-17)
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

EN-FR

TC 2

IEC 60034-15:2009
Edition 3.0 (2009-03-17)
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

EN-FR, ES

TC 2

IEC 60034-16-1:2011
Edition 2.0 (2011-05-25)
Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

EN-FR, ES

TC 2

IEC TR 60034-16-2:1991
Edition 1.0 (1991-02-15)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

EN-FR, ES

TC 2

IEC TS 60034-16-3:1996
Edition 1.0 (1996-02-14)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

EN-FR

TC 2

IEC 60034-18-1:2010
Edition 2.0 (2010-03-10)
Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

EN-FR

TC 2

IEC 60034-18-21:2012
Edition 2.0 (2012-09-19)
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

EN-FR

TC 2

IEC 60034-18-31:2012
Edition 2.0 (2012-06-25)
Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

EN-FR, ES

TC 2

IEC TS 60034-18-33:2010
Edition 2.0 (2010-07-22)
Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses

EN

TC 2

IEC 60034-18-34:2012
Edition 1.0 (2012-06-14)
Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

EN-FR, ES

TC 2

IEC 60034-18-41:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019
Edition 1.0 (2019-06-25)
Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019/COR1:2020
Edition 1.0 (2020-12-11)
Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-42:2017
Edition 1.0 (2017-02-07)
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-18-42:2017/AMD1:2020
Edition 1.0 (2020-08-18)
Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-19:2014
Edition 2.0 (2014-09-25)
Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

EN-FR, ES

TC 2

IEC TS 60034-20-1:2002
Edition 1.0 (2002-01-18)
Rotating electrical machines - Part 20-1: Control motors - Stepping motors

EN-FR

TC 2

IEC 60034-22:2009
Edition 2.0 (2009-10-28)
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

EN-FR, ES

TC 2

IEC 60034-23:2019
Edition 1.0 (2019-01-24)
Rotating electrical machines - Part 23: Repair, overhaul and reclamation

EN-FR

TC 2

IEC TS 60034-24:2009
Edition 1.0 (2009-09-16)
Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

EN-FR

TC 2

IEC TS 60034-25:2022
Edition 4.0 (2022-06-27)
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide

EN

TC 2

IEC 60034-26:2006
Edition 1.0 (2006-07-24)
Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR, ES

TC 2

IEC 60034-26:2006/COR1:2014
Edition 1.0 (2014-09-03)
Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR

TC 2

IEC 60034-27-1:2017
Edition 1.0 (2017-12-13)
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

EN-FR

TC 2

IEC TS 60034-27-2:2012
Edition 1.0 (2012-03-22)
Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

EN

TC 2

IEC 60034-27-3:2015
Edition 1.0 (2015-12-16)
Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-27-4:2018
Edition 1.0 (2018-01-24)
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-28:2012
Edition 2.0 (2012-12-13)
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

EN-FR, ES

TC 2

IEC 60034-29:2008
Edition 1.0 (2008-03-11)
Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

EN-FR, ES

TC 2

IEC 60034-30-1:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

EN-FR

TC 2

IEC TS 60034-30-2:2016
Edition 1.0 (2016-12-08)
Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)

EN

TC 2

IEC TS 60034-31:2021
Edition 2.0 (2021-03-17)
Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines

EN

TC 2

IEC TS 60034-32:2016
Edition 1.0 (2016-12-15)
Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings

EN

TC 2

IEC 60038:2009
Edition 7.0 (2009-06-17)
IEC standard voltages

EN-FR, ES

TC 8

IEC 60038:2009/AMD1:2021
Edition 7.0 (2021-12-15)
Amendment 1 - IEC standard voltages

EN-FR

TC 8

IEC 60045-1:2020
Edition 2.0 (2020-05-13)
Steam turbines - Part 1: Specifications

EN-FR

TC 5

IEC 60051-1:2016
Edition 6.0 (2016-02-03)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

EN-FR

TC 85

IEC 60051-2:2018
Edition 5.0 (2018-08-30)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters

EN-FR

TC 85

IEC 60051-3:2018
Edition 5.0 (2018-08-30)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters

EN-FR

TC 85

IEC 60051-4:2018
Edition 5.0 (2018-08-30)
Direct acting indicating analogue electrical measuring instruments and their accessories title - Part 4: Special requirements for frequency meters

EN-FR

TC 85

IEC 60051-5:2017
Edition 5.0 (2017-12-15)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes

EN-FR

TC 85

IEC 60051-6:2017
Edition 5.0 (2017-12-15)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters

EN-FR

TC 85

IEC 60051-7:2017
Edition 5.0 (2017-12-15)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments

EN-FR

TC 85

IEC 60051-8:2017
Edition 5.0 (2017-12-15)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories

EN-FR

TC 85

IEC 60051-9:2019
Edition 5.0 (2019-02-15)
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods

EN-FR

TC 85

IEC 60052:2002
Edition 3.0 (2002-10-15)
Voltage measurement by means of standard air gaps

EN-FR, ES

TC 42

IEC 60059:1999+AMD1:2009 CSV
Edition 2.1 (2009-08-11)
IEC standard current ratings

EN-FR

TC 8

IEC 60059:1999
Edition 2.0 (1999-06-24)
IEC standard current ratings

EN-FR, ES

TC 8

IEC 60059:1999/AMD1:2009
Edition 2.0 (2009-06-16)
Amendment 1 - IEC standard current ratings

EN-FR, ES

TC 8

IEC 60060-1:2010
Edition 3.0 (2010-09-29)
High-voltage test techniques - Part 1: General definitions and test requirements

EN-FR, ES

TC 42

IEC 60060-2:2010
Edition 3.0 (2010-11-29)
High-voltage test techniques - Part 2: Measuring systems

EN-FR, ES

TC 42

IEC 60061-1:2005 CSV
Edition 3.4 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD21:1998
Edition 3.0 (1998-03-16)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD22:1999
Edition 3.0 (1999-02-23)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD23:1999
Edition 3.0 (1999-07-29)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD24:2000
Edition 3.0 (2000-05-18)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD26:2001
Edition 3.0 (2001-02-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD27:2001
Edition 3.0 (2001-10-26)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD28:2002
Edition 3.0 (2002-05-03)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD29:2002
Edition 3.0 (2002-05-13)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD30:2002
Edition 3.0 (2002-10-29)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD31:2003
Edition 3.0 (2003-05-15)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD32:2003
Edition 3.0 (2003-09-03)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD33:2003
Edition 3.0 (2003-10-30)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD34:2004
Edition 3.0 (2004-07-26)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD35:2004
Edition 3.0 (2004-11-25)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD36:2005
Edition 3.0 (2005-10-03)
Amendment 36 to IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD37:2006
Edition 3.0 (2006-05-30)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD38:2006
Edition 3.0 (2006-12-14)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD39:2007
Edition 3.0 (2007-04-30)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD40:2008
Edition 3.0 (2008-07-18)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD41:2009
Edition 3.0 (2009-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD42:2009
Edition 3.0 (2009-07-24)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD43:2010
Edition 3.0 (2010-02-22)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD44:2010
Edition 3.0 (2010-04-29)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD45:2011
Edition 3.0 (2011-06-30)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD46:2011
Edition 3.0 (2011-06-30)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD47:2011
Edition 3.0 (2011-11-28)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD48:2012
Edition 3.0 (2012-09-27)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD49:2013
Edition 3.0 (2013-02-26)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD50:2014
Edition 3.0 (2014-02-19)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD51:2014
Edition 3.0 (2014-12-11)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD52:2015
Edition 3.0 (2015-07-24)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD53:2015
Edition 3.0 (2015-08-21)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD54:2016
Edition 3.0 (2016-05-30)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD55:2016
Edition 3.0 (2016-12-16)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD56:2017
Edition 3.0 (2017-05-16)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD56:2017/COR1:2017
Edition 3.0 (2017-11-14)
Corrigendum 1 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD57:2017
Edition 3.0 (2017-12-15)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD58:2018
Edition 3.0 (2018-08-23)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD58:2018/COR1:2019
Edition 3.0 (2019-03-12)
Corrigendum 1 - Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD59:2019
Edition 3.0 (2019-07-08)
Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD60:2020
Edition 3.0 (2020-03-31)
Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD61:2020
Edition 3.0 (2020-11-27)
Amendment 61 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD62:2022
Edition 3.0 (2022-03-11)
Amendment 62 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1:1969/AMD63:2022
Edition 3.0 (2022-05-27)
Amendment 63 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-2:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR, RU

TC 34/SC 34B

IEC 60061-2:1969/AMD18:1998
Edition 3.0 (1998-03-16)
Amendment 18 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD19:1999
Edition 3.0 (1999-02-23)
Amendment 19 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD20:1999
Edition 3.0 (1999-07-29)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD21:2000
Edition 3.0 (2000-05-26)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD22:2001
Edition 3.0 (2001-02-13)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD23:2001
Edition 3.0 (2001-02-13)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD24:2001
Edition 3.0 (2001-10-26)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD25:2002
Edition 3.0 (2002-05-03)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD26:2002
Edition 3.0 (2002-05-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD27:2002
Edition 3.0 (2002-10-29)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD28:2003
Edition 3.0 (2003-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD29:2003
Edition 3.0 (2003-09-03)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD30:2003
Edition 3.0 (2003-10-30)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD31:2004
Edition 3.0 (2004-07-26)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD32:2004
Edition 3.0 (2004-11-25)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD33:2005
Edition 3.0 (2005-10-03)
Amendment 33 to IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD34:2006
Edition 3.0 (2006-05-30)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD35:2006
Edition 3.0 (2006-12-14)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD36:2007
Edition 3.0 (2007-04-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD37:2008
Edition 3.0 (2008-07-18)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD38:2009
Edition 3.0 (2009-04-29)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD39:2009
Edition 3.0 (2009-07-24)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD40:2010
Edition 3.0 (2010-02-22)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD41:2010
Edition 3.0 (2010-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD42:2011
Edition 3.0 (2011-06-30)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD44:2011
Edition 3.0 (2011-11-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD45:2012
Edition 3.0 (2012-09-27)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD46:2013
Edition 3.0 (2013-02-26)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD47:2014
Edition 3.0 (2014-02-19)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD48:2014
Edition 3.0 (2014-12-11)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD49:2015
Edition 3.0 (2015-07-24)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD50:2015
Edition 3.0 (2015-08-21)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD51:2016
Edition 3.0 (2016-05-30)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD52:2017
Edition 3.0 (2017-05-16)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD53:2017
Edition 3.0 (2017-12-15)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD54:2018
Edition 3.0 (2018-08-23)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD55:2020
Edition 3.0 (2020-03-31)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD56:2020
Edition 3.0 (2020-05-13)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD57:2020
Edition 3.0 (2020-11-27)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2:1969/AMD58:2022
Edition 3.0 (2022-05-27)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-3:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR, RU

TC 34/SC 34B

IEC 60061-3:1969/AMD20:1998
Edition 3.0 (1998-03-16)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD21:1999
Edition 3.0 (1999-02-23)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD22:1999
Edition 3.0 (1999-07-29)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD23:2000
Edition 3.0 (2000-05-18)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD24:2001
Edition 3.0 (2001-02-13)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD26:2001
Edition 3.0 (2001-10-26)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD27:2002
Edition 3.0 (2002-05-03)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD28:2002
Edition 3.0 (2002-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD29:2002
Edition 3.0 (2002-10-31)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD30:2003
Edition 3.0 (2003-05-15)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD31:2003
Edition 3.0 (2003-09-03)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD32:2003
Edition 3.0 (2003-10-30)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD33:2004
Edition 3.0 (2004-07-26)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD34:2004
Edition 3.0 (2004-11-25)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD35:2005
Edition 3.0 (2005-10-03)
Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD36:2006
Edition 3.0 (2006-05-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD37:2006
Edition 3.0 (2006-12-14)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD38:2007
Edition 3.0 (2007-04-30)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD39:2009
Edition 3.0 (2009-04-29)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD40:2009
Edition 3.0 (2009-07-24)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD41:2010
Edition 3.0 (2010-02-22)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD42:2010
Edition 3.0 (2010-04-29)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD44:2011
Edition 3.0 (2011-07-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD45:2011
Edition 3.0 (2011-11-28)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD46:2012
Edition 3.0 (2012-09-27)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD47:2013
Edition 3.0 (2013-02-26)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD48:2014
Edition 3.0 (2014-02-19)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD49:2014
Edition 3.0 (2014-12-11)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD50:2015
Edition 3.0 (2015-07-24)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD51:2015
Edition 3.0 (2015-08-21)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD52:2016
Edition 3.0 (2016-05-30)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD53:2017
Edition 3.0 (2017-05-16)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD54:2017
Edition 3.0 (2017-12-15)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD55:2018
Edition 3.0 (2018-08-23)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD56:2019
Edition 3.0 (2019-07-08)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD57:2020
Edition 3.0 (2020-03-31)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3:1969/AMD58:2020
Edition 3.0 (2020-05-13)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-4:2005 CSV
Edition 1.9 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990
Edition 1.0 (1990-02-28)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD5:1998
Edition 1.0 (1998-03-16)
Amendment 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD6:2000
Edition 1.0 (2000-05-18)
Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD7:2001
Edition 1.0 (2001-10-26)
Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD8:2003
Edition 1.0 (2003-05-13)
Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD9:2004
Edition 1.0 (2004-11-25)
Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD10:2006
Edition 1.0 (2006-05-30)
Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD11:2007
Edition 1.0 (2007-10-16)
Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD12:2009
Edition 1.0 (2009-07-24)
Amendment 12 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD13:2010
Edition 1.0 (2010-08-31)
Amendment 13 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD14:2011
Edition 1.0 (2011-08-26)
Amendment 14 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD15:2017
Edition 1.0 (2017-05-16)
Amendment 15 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4:1990/AMD16:2018
Edition 1.0 (2018-03-22)
Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-1A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1D:1972
Edition 3.0 (1972-01-01)
supplement 4 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1E:1972
Edition 3.0 (1972-01-01)
Supplement 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1F:1975
Edition 3.0 (1975-01-01)
Supplement 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1H:1977
Edition 3.0 (1977-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1J:1980
Edition 3.0 (1980-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

EN-FR, RU

TC 34/SC 34B

IEC 60061-1K:1983
Edition 3.0 (1983-01-01)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1L:1987
Edition 3.0 (1987-01-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1M:1989
Edition 3.0 (1989-01-01)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1N:1992
Edition 3.0 (1992-04-30)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1P:1994
Edition 3.0 (1994-03-01)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1Q:1994
Edition 3.0 (1994-11-23)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1R:1995
Edition 3.0 (1995-11-08)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1S:1996
Edition 3.0 (1996-02-01)
seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1T:1996
Edition 3.0 (1996-07-01)
eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1U:1996
Edition 3.0 (1996-10-01)
nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-1V:1997
Edition 3.0 (1997-05-23)
Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

EN-FR

TC 34/SC 34B

IEC 60061-2A:1970
Edition 3.0 (1970-01-01)
first supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2B:1971
Edition 3.0 (1971-01-01)
second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2C:1972
Edition 3.0 (1972-01-01)
third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2D:1975
Edition 3.0 (1975-01-01)
fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2E:1977
Edition 3.0 (1977-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2F:1980
Edition 3.0 (1980-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

EN-FR, RU

TC 34/SC 34B

IEC 60061-2G:1983
Edition 3.0 (1983-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2H:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement.

EN-FR

TC 34/SC 34B

IEC 60061-2J:1989
Edition 3.0 (1989-12-31)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement.

EN-FR

TC 34/SC 34B

IEC 60061-2K:1992
Edition 3.0 (1992-04-15)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2L:1994
Edition 3.0 (1994-03-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2M:1994
Edition 3.0 (1994-11-23)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2N:1995
Edition 3.0 (1995-11-08)
Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2P:1996
Edition 3.0 (1996-02-01)
Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2Q:1996
Edition 3.0 (1996-07-01)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2R:1996
Edition 3.0 (1996-10-01)
sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-2S:1997
Edition 3.0 (1997-05-23)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

EN-FR

TC 34/SC 34B

IEC 60061-3A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3D:1972
Edition 3.0 (1972-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3E:1972
Edition 3.0 (1972-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3F:1975
Edition 3.0 (1975-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3H:1980
Edition 3.0 (1980-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3J:1983
Edition 3.0 (1983-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3K:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement.

EN-FR

TC 34/SC 34B

IEC 60061-3L:1989
Edition 3.0 (1989-12-15)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement.

EN-FR

TC 34/SC 34B

IEC 60061-3M:1992
Edition 3.0 (1992-04-30)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3N:1994
Edition 3.0 (1994-03-01)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3P:1994
Edition 3.0 (1994-11-23)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3Q:1995
Edition 3.0 (1995-11-08)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3R:1996
Edition 3.0 (1996-02-01)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3S:1996
Edition 3.0 (1996-07-01)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3T:1996
Edition 3.0 (1996-10-01)
Eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-3U:1997
Edition 3.0 (1997-05-23)
Nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

EN-FR

TC 34/SC 34B

IEC 60061-4A:1992
Edition 1.0 (1992-04-30)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4B:1994
Edition 1.0 (1994-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4C:1994
Edition 1.0 (1994-11-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60061-4D:1995
Edition 1.0 (1995-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

EN-FR

TC 34/SC 34B

IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV
Edition 6.3 (2005-05-24)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, EN, FR

TC 34/SC 34A

IEC 60064:1993
Edition 6.0 (1993-12-17)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD1:2000
Edition 6.0 (2000-11-28)
Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD2:2002
Edition 6.0 (2002-11-29)
Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR, ES

TC 34/SC 34A

IEC 60064:1993/AMD3:2005
Edition 6.0 (2005-03-17)
Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60064:1993/AMD4:2007
Edition 6.0 (2007-02-16)
Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60064:1993/AMD5:2009
Edition 6.0 (2009-07-30)
Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

EN-FR

TC 34/SC 34A

IEC 60065:2014
Edition 8.0 (2014-06-27)
Audio, video and similar electronic apparatus - Safety requirements

EN-FR, ES

TC 108

IEC 60065:2014/COR1:2015
Edition 8.0 (2015-12-14)
Corrigendum 1 - Audio, video and similar electronic apparatus - Safety requirements

EN-FR

TC 108

IEC 60065:2014/COR2:2016
Edition 8.0 (2016-12-15)
Corrigendum 2 - Audio, video and similar electronic apparatus - Safety requirements

EN-FR

TC 108

IEC 60065:2014/COR3:2018
Edition 8.0 (2018-12-13)
Corrigendum 3 - Audio, video and similar electronic apparatus - Safety requirements

EN-FR

TC 108

IEC 60068-1:2013
Edition 7.0 (2013-10-07)
Environmental testing - Part 1: General and guidance

EN-FR

TC 104

IEC 60068-2-1:2007
Edition 6.0 (2007-03-13)
Environmental testing - Part 2-1: Tests - Test A: Cold

EN-FR, EN, FR, ES

TC 104

IEC 60068-2-2:2007
Edition 5.0 (2007-07-16)
Environmental testing - Part 2-2: Tests - Test B: Dry heat

EN-FR, ES

TC 104

IEC 60068-2-5:2018
Edition 3.0 (2018-04-06)
Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering

EN-FR, EN

TC 104

IEC 60068-2-6:2007
Edition 7.0 (2007-12-13)
Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

EN-FR, ES

TC 104

IEC 60068-2-7:1983
Edition 2.0 (1983-01-01)
Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state

EN-FR, RU

TC 104

IEC 60068-2-7:1983/AMD1:1986
Edition 2.0 (1986-06-01)
Amendment 1 - Basic environmental testing procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state

EN-FR, RU

TC 104

IEC 60068-2-10:2005
Edition 6.0 (2005-06-13)
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth

EN-FR, ES

TC 104

IEC 60068-2-10:2005/AMD1:2018
Edition 6.0 (2018-04-25)
Amendment 1 - Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth

EN-FR

TC 104

IEC 60068-2-11:2021
Edition 4.0 (2021-03-03)
Environmental testing - Part 2-11: Tests - Test Ka: Salt mist

EN-FR

TC 104

IEC 60068-2-13:2021
Edition 5.0 (2021-03-03)
Environmental testing - Part 2-13: Tests - Test M: Low air pressure

EN-FR

TC 104

IEC 60068-2-14:2009
Edition 6.0 (2009-01-12)
Environmental testing - Part 2-14: Tests - Test N: Change of temperature

EN-FR, ES

TC 104

IEC 60068-2-17:1994
Edition 4.0 (1994-07-07)
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing

EN-FR, ES, RU

TC 104

IEC 60068-2-18:2017
Edition 3.0 (2017-03-10)
Environmental testing - Part 2-18: Tests - Test R and guidance: Water

EN-FR

TC 104

IEC 60068-2-20:2021
Edition 6.0 (2021-03-30)
Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads

EN-FR

TC 91

IEC 60068-2-21:2021
Edition 7.0 (2021-07-08)
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

EN-FR

TC 91

IEC 60068-2-27:2008
Edition 4.0 (2008-02-27)
Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

EN-FR, ES

TC 104

IEC 60068-2-30:2005
Edition 3.0 (2005-08-10)
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

EN-FR, EN, FR, ES

TC 104

IEC 60068-2-31:2008
Edition 2.0 (2008-05-21)
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens

EN-FR, ES

TC 104

IEC 60068-2-38:2021
Edition 3.0 (2021-03-25)
Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test

EN-FR

TC 104

IEC 60068-2-39:2015
Edition 2.0 (2015-09-16)
Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

EN-FR, ES

TC 104

IEC 60068-2-42:2003
Edition 3.0 (2003-05-22)
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

EN-FR, ES

TC 48/SC 48B

IEC 60068-2-43:2003
Edition 2.0 (2003-05-23)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, ES

TC 48/SC 48B

IEC 60068-2-45:1980
Edition 1.0 (1980-01-01)
Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents

EN-FR, ES, RU

TC 104

IEC 60068-2-45:1980/AMD1:1993
Edition 1.0 (1993-02-15)
Amendment 1 - Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents

EN-FR, ES, RU

TC 104

IEC 60068-2-46:1982
Edition 1.0 (1982-01-01)
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, RU

TC 48/SC 48B

IEC 60068-2-47:2005
Edition 3.0 (2005-04-13)
Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests

EN-FR, ES

TC 104

IEC 60068-2-49:1983
Edition 1.0 (1983-01-01)
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections

EN-FR, RU

TC 48/SC 48B

IEC 60068-2-52:2017
Edition 3.0 (2017-11-07)
Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)

EN-FR, EN

TC 104

IEC 60068-2-53:2010
Edition 2.0 (2010-04-21)
Environmental testing - Part 2-53: Tests and guidance - Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests

EN-FR, ES

TC 104

IEC 60068-2-55:2013
Edition 2.0 (2013-02-06)
Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce

EN-FR

TC 104

IEC 60068-2-57:2013
Edition 3.0 (2013-04-25)
Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history and sine-beat method

EN-FR

TC 104

IEC 60068-2-58:2015
Edition 4.0 (2015-03-27)
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

EN-FR

TC 91

IEC 60068-2-58:2015/AMD1:2017
Edition 4.0 (2017-07-28)
Amendment 1 - Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

EN-FR, EN

TC 91

IEC 60068-2-60:2015
Edition 3.0 (2015-06-18)
Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test

EN-FR, ES

TC 104

IEC 60068-2-64:2008
Edition 2.0 (2008-04-29)
Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

EN-FR, ES

TC 104

IEC 60068-2-64:2008/AMD1:2019
Edition 2.0 (2019-10-09)
Amendment 1 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance

EN-FR, ES

TC 104

IEC 60068-2-65:2013
Edition 2.0 (2013-02-06)
Environmental testing - Part 2-65: Tests - Test Fg: Vibration - Acoustically induced method

EN-FR

TC 104

IEC 60068-2-66:1994
Edition 1.0 (1994-06-22)
Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

EN-FR, ES

TC 104

IEC 60068-2-67:1995
Edition 1.0 (1995-12-13)
Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components

EN-FR, ES, RU

TC 104

IEC 60068-2-67:1995/AMD1:2019
Edition 1.0 (2019-07-02)
Amendment 1 - Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components

EN-FR

TC 104

IEC 60068-2-68:1994
Edition 1.0 (1994-08-17)
Environmental testing - Part 2-68: Tests - Test L: Dust and sand

EN-FR, ES, RU

TC 104

IEC 60068-2-69:2017
Edition 3.0 (2017-03-07)
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

EN-FR

TC 91

IEC 60068-2-69:2017/COR1:2018
Edition 3.0 (2018-01-24)
Corrigendum 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement)

EN-FR

TC 91

IEC 60068-2-69:2017/AMD1:2019
Edition 3.0 (2019-06-19)
Amendment 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

EN-FR

TC 91

IEC 60068-2-70:1995
Edition 1.0 (1995-12-22)
Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands

EN-FR, ES, RU

TC 104

IEC 60068-2-74:1999
Edition 1.0 (1999-06-30)
Environmental testing - Part 2: Tests - Test Xc: Fluid contamination

EN-FR, ES

TC 104

IEC 60068-2-74:1999/AMD1:2018
Edition 1.0 (2018-04-25)
Amendment 1 - Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination

EN-FR

TC 104

IEC 60068-2-75:2014
Edition 2.0 (2014-09-03)
Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

EN-FR

TC 104

IEC 60068-2-78:2012
Edition 2.0 (2012-10-30)
Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

EN-FR, ES

TC 104

IEC 60068-2-80:2005
Edition 1.0 (2005-05-12)
Environmental testing - Part 2-80: Tests - Test Fi: Vibration - Mixed mode

EN-FR, ES

TC 104

IEC 60068-2-81:2003
Edition 1.0 (2003-07-08)
Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis

EN-FR, ES

TC 104

IEC 60068-2-82:2019
Edition 2.0 (2019-05-14)
Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies

EN-FR

TC 91

IEC 60068-2-83:2011
Edition 1.0 (2011-09-07)
Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

EN-FR

TC 91

IEC 60068-2-85:2019
Edition 1.0 (2019-06-20)
Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication

EN-FR

TC 104

IEC 60068-3-1:2011
Edition 2.0 (2011-08-19)
Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests

EN-FR, ES

TC 104

IEC 60068-3-3:2019
Edition 2.0 (2019-08-23)
Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment

EN-FR

TC 104

IEC 60068-3-3:2019/COR1:2021
Edition 2.0 (2021-09-29)
Corrigendum 1 - Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment

EN-FR

TC 104

IEC 60068-3-4:2001
Edition 1.0 (2001-08-28)
Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests

EN-FR, ES

TC 104

IEC 60068-3-5:2018
Edition 2.0 (2018-01-23)
Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers

EN-FR, EN

TC 104

IEC 60068-3-6:2018
Edition 2.0 (2018-01-23)
Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambers

EN-FR, EN

TC 104

IEC 60068-3-7:2020
Edition 2.0 (2020-07-07)
Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)

EN-FR

TC 104

IEC 60068-3-8:2003
Edition 1.0 (2003-08-28)
Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests

EN-FR, ES

TC 104

IEC 60068-3-11:2007
Edition 1.0 (2007-05-15)
Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of uncertainty of conditions in climatic test chambers

EN-FR, ES

TC 104

IEC TR 60068-3-12:2014
Edition 2.0 (2014-10-17)
Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile

EN-FR

TC 91

IEC 60068-3-13:2016
Edition 1.0 (2016-05-13)
Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering

EN-FR

TC 91

IEC 60068-5-2:1990
Edition 1.0 (1990-12-01)
Environmental testing - Part 5-2: Guide to drafting of test methods - Terms and definitions

EN-FR, ES, RU

TC 104

IEC 60071-1:2019
Edition 9.0 (2019-08-08)
Insulation co-ordination - Part 1: Definitions, principles and rules

EN-FR, ES

TC 99

IEC 60071-2:2018
Edition 4.0 (2018-03-16)
Insulation co-ordination - Part 2: Application guidelines

EN-FR, ES

TC 99

IEC TR 60071-4:2004
Edition 1.0 (2004-06-23)
Insulation co-ordination - Part 4: Computational guide to insulation co-ordination and modelling of electrical networks

EN

TC 99

IEC 60071-5:2014
Edition 1.0 (2014-10-24)
Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations

EN-FR, ES

TC 99

IEC 60072-1:2022
Edition 7.0 (2022-03-30)
Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

EN-FR

TC 2

IEC 60072-2:1990
Edition 1.0 (1990-12-31)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

EN-FR

TC 2

IEC 60072-3:1994
Edition 1.0 (1994-03-11)
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

EN-FR

TC 2

IEC 60076-1:2011
Edition 3.0 (2011-04-20)
Power transformers - Part 1: General

EN-FR, ES

TC 14

IEC 60076-2:2011
Edition 3.0 (2011-02-23)
Power transformers - Part 2: Temperature rise for liquid-immersed transformers

EN-FR, ES

TC 14

IEC 60076-3:2013
Edition 3.0 (2013-07-31)
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

EN-FR, ES

TC 14

IEC 60076-3:2013/AMD1:2018
Edition 3.0 (2018-03-22)
Amendment 1 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

EN-FR, ES

TC 14

IEC 60076-4:2002
Edition 1.0 (2002-06-06)
Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

EN-FR, EN, FR, ES

TC 14

IEC 60076-5:2006
Edition 3.0 (2006-02-07)
Power transformers - Part 5: Ability to withstand short circuit

EN-FR, EN, FR, ES

TC 14

IEC 60076-6:2007
Edition 1.0 (2007-12-13)
Power transformers - Part 6: Reactors

EN-FR, ES

TC 14

IEC 60076-7:2018
Edition 2.0 (2018-01-12)
Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers

EN

TC 14

IEC 60076-8:1997
Edition 1.0 (1997-10-01)
Power transformers - Part 8: Application guide

EN-FR, EN, FR, ES

TC 14

IEC 60076-10:2016
Edition 2.0 (2016-03-24)
Power transformers - Part 10: Determination of sound levels

EN-FR, ES

TC 14

IEC 60076-10-1:2016
Edition 2.0 (2016-03-24)
Power transformers - Part 10-1: Determination of sound levels - Application guide

EN-FR

TC 14

IEC 60076-10-1:2016/AMD1:2020
Edition 2.0 (2020-11-02)
Amendment 1 - Power transformers - Part 10-1: Determination of sound levels - Application guide

EN

TC 14

IEC 60076-11:2018
Edition 2.0 (2018-08-15)
Power transformers - Part 11: Dry-type transformers

EN-FR, ES

TC 14

IEC 60076-11:2018/ISH1:2020
Edition 2.0 (2020-07-10)
Interpretation sheet 1 - Power transformers - Part 11: Dry-type transformers

EN

TC 14

IEC 60076-11:2018/COR1:2019
Edition 2.0 (2019-03-28)
Corrigendum 1 - Power transformers - Part 11: Dry-type transformers

EN-FR

TC 14

IEC 60076-12:2008
Edition 1.0 (2008-11-05)
Power transformers - Part 12: Loading guide for dry-type power transformers

EN-FR, ES

TC 14

IEC 60076-13:2006
Edition 1.0 (2006-05-24)
Power transformers - Part 13: Self-protected liquid-filled transformers

EN-FR, ES

TC 14

IEC 60076-14:2013
Edition 1.0 (2013-09-16)
Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials

EN-FR, ES

TC 14

IEC 60076-15:2015
Edition 2.0 (2015-04-22)
Power transformers - Part 15: Gas-filled power transformers

EN-FR

TC 14

IEC 60076-18:2012
Edition 1.0 (2012-07-09)
Power transformers - Part 18: Measurement of frequency response

EN-FR, ES

TC 14

IEC TS 60076-20:2017
Edition 1.0 (2017-01-30)
Power transformers - Part 20: Energy efficiency

EN

TC 14

IEC TS 60076-20:2017/COR1:2018
Edition 1.0 (2018-01-12)
Corrigendum 1 - Power transformers - Part 20: Energy efficiency

EN

TC 14

IEC 60076-21:2018
Edition 2.0 (2018-12-07)
Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators

EN

TC 14

IEC 60076-22-1:2019
Edition 1.0 (2019-01-29)
Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices

EN-FR, ES

TC 14

IEC 60076-22-2:2019
Edition 1.0 (2019-01-16)
Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators

EN-FR, ES

TC 14

IEC 60076-22-3:2019
Edition 1.0 (2019-03-08)
Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers

EN-FR, ES

TC 14

IEC 60076-22-4:2019
Edition 1.0 (2019-03-08)
Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers

EN-FR, ES

TC 14

IEC 60076-22-7:2020
Edition 1.0 (2020-05-07)
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings

EN-FR, ES

TC 14

IEC TS 60076-23:2018
Edition 1.0 (2018-01-09)
Power transformers - Part 23: DC magnetic bias suppression devices

EN

TC 14

IEC 60076-24:2020
Edition 1.0 (2020-07-09)
Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)

EN-FR, ES

TC 14

IEC TR 60076-26:2020
Edition 1.0 (2020-03-26)
Power transformers - Part 26: Functional requirements of insulating liquids for use in power transformers

EN

TC 14

IEC/IEEE 60076-57-1202:2017
Edition 1.0 (2017-05-23)
Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers

EN-FR

TC 14

IEC/IEEE 60076-57-129:2017
Edition 1.0 (2017-11-09)
Power transformers - Part 57-129: Transformers for HVDC applications

EN

TC 14

IEC 60077-4:2019
Edition 2.0 (2019-10-25)
Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers

EN-FR, ES

TC 9

IEC 60079-0:2017
Edition 7.0 (2017-12-13)
Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR, ES

TC 31

IEC 60079-0:2017/ISH1:2019
Edition 7.0 (2019-04-23)
Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-0:2017/ISH2:2019
Edition 7.0 (2019-06-27)
Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-0:2017/COR1:2020
Edition 7.0 (2020-01-20)
Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-1:2014
Edition 7.0 (2014-06-27)
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN-FR, ES

TC 31

IEC 60079-1:2014/ISH1:2020
Edition 7.0 (2020-05-28)
Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN

TC 31

IEC 60079-1:2014/COR1:2018
Edition 7.0 (2018-06-26)
Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN-FR

TC 31

IEC 60079-2:2014
Edition 6.0 (2014-07-21)
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

EN-FR, ES

TC 31

IEC 60079-2:2014/COR1:2015
Edition 6.0 (2015-07-07)
Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

EN-FR

TC 31

IEC 60079-5:2015
Edition 4.0 (2015-02-17)
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

EN-FR, ES

TC 31

IEC 60079-5:2015/AMD1:2022
Edition 4.0 (2022-05-12)
Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

EN-FR, EN

TC 31

IEC 60079-6:2015
Edition 4.0 (2015-02-20)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

EN-FR, ES

TC 31

IEC 60079-6:2015/AMD1:2020
Edition 4.0 (2020-02-24)
Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

EN-FR

TC 31

IEC 60079-7:2015
Edition 5.0 (2015-06-26)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR, EN, ES

TC 31

IEC 60079-7:2015/ISH1:2016
Edition 5.0 (2016-09-15)
Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR

TC 31

IEC 60079-7:2015/AMD1:2017
Edition 5.0 (2017-08-04)
Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR, ES

TC 31

IEC 60079-10-1:2020
Edition 3.0 (2020-12-18)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

EN-FR, ES

TC 31/SC 31J

IEC 60079-10-2:2015
Edition 2.0 (2015-01-16)
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

EN-FR, ES

TC 31/SC 31J

IEC 60079-11:2011
Edition 6.0 (2011-06-30)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR, ES

TC 31/SC 31G

IEC 60079-11:2011/ISH1:2014
Edition 6.0 (2014-10-08)
Interpretation sheet 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH2:2016
Edition 6.0 (2016-07-21)
Interpretation sheet 2 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH3:2016
Edition 6.0 (2016-07-21)
Intrepretation sheet 3 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH4:2019
Edition 6.0 (2019-04-16)
Interpretation Sheet 4 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH5:2019
Edition 6.0 (2019-08-29)
Interpretation Sheet 5 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN

TC 31/SC 31G

IEC 60079-11:2011/ISH6:2019
Edition 6.0 (2019-12-13)
Interpretation sheet 6 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/COR1:2012
Edition 6.0 (2012-01-27)
Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-13:2017
Edition 2.0 (2017-05-22)
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

EN-FR, EN, ES

TC 31

IEC 60079-14:2013
Edition 5.0 (2013-11-28)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR, ES

TC 31/SC 31J

IEC 60079-14:2013/ISH1:2017
Edition 5.0 (2017-02-13)
Intrepretation sheet 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR

TC 31/SC 31J

IEC 60079-14:2013/ISH2:2020
Edition 5.0 (2020-03-13)
Interpretation sheet 2 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN

TC 31/SC 31J

IEC 60079-14:2013/COR1:2016
Edition 5.0 (2016-01-28)
Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR

TC 31/SC 31J

IEC 60079-15:2017
Edition 5.0 (2017-12-08)
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

EN-FR, ES

TC 31

IEC TR 60079-16:1990
Edition 1.0 (1990-05-15)
Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses

EN-FR, ES

TC 31

IEC 60079-17:2013
Edition 5.0 (2013-11-19)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

EN-FR, ES

TC 31/SC 31J

IEC 60079-18:2014
Edition 4.0 (2014-12-12)
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR, ES

TC 31

IEC 60079-18:2014/COR1:2018
Edition 4.0 (2018-07-25)
Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR

TC 31

IEC 60079-18:2014/AMD1:2017
Edition 4.0 (2017-08-24)
Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR, ES

TC 31

IEC 60079-19:2019
Edition 4.0 (2019-10-18)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

EN-FR, ES

TC 31/SC 31J

IEC 60079-25:2020
Edition 3.0 (2020-06-26)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems

EN-FR

TC 31/SC 31G

IEC 60079-25:2020/COR1:2020
Edition 3.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

EN-FR

TC 31/SC 31G

IEC 60079-26:2021
Edition 4.0 (2021-02-25)
Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection

EN-FR

TC 31

IEC 60079-28:2015
Edition 2.0 (2015-05-27)
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

EN-FR, ES

TC 31

IEC 60079-28:2015/ISH1:2019
Edition 2.0 (2019-11-14)
Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

EN-FR

TC 31

IEC 60079-29-1:2016
Edition 2.0 (2016-07-21)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN-FR, EN, ES

TC 31

IEC 60079-29-1:2016/ISH1:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN

TC 31

IEC 60079-29-1:2016/ISH2:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN

TC 31

IEC 60079-29-1:2016/AMD1:2020
Edition 2.0 (2020-03-24)
Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN-FR

TC 31

IEC 60079-29-2:2015
Edition 2.0 (2015-03-16)
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

EN-FR, EN, ES

TC 31

IEC 60079-29-3:2014
Edition 1.0 (2014-03-27)
Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

EN-FR, ES

TC 31

IEC 60079-29-4:2009
Edition 1.0 (2009-11-10)
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

EN-FR, ES

TC 31

IEC 60079-29-4:2009/COR1:2010
Edition 1.0 (2010-08-10)
Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

EN-FR

TC 31

IEC/IEEE 60079-30-1:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

EN-FR, EN, ES

TC 31

IEC/IEEE 60079-30-2:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

EN-FR, EN, ES

TC 31

IEC 60079-31:2022
Edition 3.0 (2022-01-17)
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

EN-FR

TC 31

IEC TS 60079-32-1:2013
Edition 1.0 (2013-08-20)
Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

EN-FR, EN, RU

TC 31

IEC TS 60079-32-1:2013/AMD1:2017
Edition 1.0 (2017-03-16)
Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

EN-FR, EN

TC 31

IEC 60079-32-2:2015
Edition 1.0 (2015-02-25)
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

EN-FR, ES, RU

TC 31

IEC 60079-33:2012
Edition 1.0 (2012-09-27)
Explosive atmospheres - Part 33: Equipment protection by special protection 's'

EN-FR

TC 31

IEC 60079-35-1:2011
Edition 1.0 (2011-05-26)
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

EN-FR, ES

TC 31

IEC 60079-35-2:2011
Edition 1.0 (2011-12-07)
Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

EN-FR, ES

TC 31

IEC TS 60079-39:2015
Edition 1.0 (2015-06-11)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

EN

TC 31/SC 31G

IEC TS 60079-39:2015/COR1:2020
Edition 1.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

EN

TC 31/SC 31G

IEC TS 60079-40:2015
Edition 1.0 (2015-02-05)
Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems

EN

TC 31

IEC TS 60079-42:2019
Edition 1.0 (2019-04-17)
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

EN-FR

TC 31

IEC TS 60079-43:2017
Edition 1.0 (2017-11-13)
Explosive atmospheres - Part 43: Equipment in adverse service conditions

EN

TC 31

IEC TS 60079-46:2017
Edition 1.0 (2017-08-31)
Explosive atmospheres - Part 46: Equipment assemblies

EN-FR, EN

TC 31

IEC 60081:1997+AMD1:2000 CSV
Edition 5.1 (2002-05-29)
Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997
Edition 5.0 (1997-12-15)
Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD1:2000
Edition 5.0 (2000-01-27)
Amendment 1 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD2:2003
Edition 5.0 (2003-03-04)
Amendment 2 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD3:2005
Edition 5.0 (2005-09-27)
Amendment 3 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD4:2010
Edition 5.0 (2010-02-18)
Amendment 4 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD5:2013
Edition 5.0 (2013-07-19)
Amendment 5 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60081:1997/AMD6:2017
Edition 5.0 (2017-08-25)
Amendment 6 - Double-capped fluorescent lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC TR 60083:2015
Edition 7.0 (2015-10-29)
Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC

EN-FR

TC 23/SC 23B

IEC 60085:2007
Edition 4.0 (2007-11-07)
Electrical insulation - Thermal evaluation and designation

EN-FR, ES

TC 112

IEC 60086-1:2021
Edition 13.0 (2021-04-27)
Primary batteries - Part 1: General

EN-FR

TC 35

IEC 60086-1:2021/COR1:2022
Edition 13.0 (2022-06-17)
Corrigendum 1 - Primary batteries - Part 1: General

EN-FR

TC 35

IEC 60086-2:2021
Edition 14.0 (2021-04-27)
Primary batteries - Part 2: Physical and electrical specifications

EN-FR, EN

TC 35

IEC 60086-2:2021/COR1:2022
Edition 14.0 (2022-06-17)
Corrigendum 1 - Primary batteries - Part 2: Physical and electrical specifications

EN-FR

TC 35

IEC 60086-3:2021
Edition 5.0 (2021-04-27)
Primary batteries - Part 3: Watch batteries

EN-FR, EN

TC 35

IEC 60092-350:2020
Edition 5.0 (2020-01-28)
Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

EN-FR, EN

TC 18/SC 18A

IEC 60092-352:2005
Edition 3.0 (2005-09-27)
Electrical installations in ships - Part 352: Choice and installation of electrical cables

EN, ES

TC 18/SC 18A

IEC 60092-353:2016
Edition 4.0 (2016-09-19)
Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV

EN-FR, ES

TC 18/SC 18A

IEC 60092-354:2020
Edition 4.0 (2020-02-06)
Electrical installations in ships – Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

EN-FR

TC 18/SC 18A

IEC 60092-360:2021
Edition 2.0 (2021-01-04)
Electrical installations in ships - Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables

EN

TC 18/SC 18A

IEC TR 60092-370:2019
Edition 2.0 (2019-11-15)
Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables

EN

TC 18/SC 18A

IEC 60092-376:2017
Edition 3.0 (2017-05-22)
Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)

EN, ES

TC 18/SC 18A

IEC 60096-0-1:2012
Edition 3.0 (2012-10-30)
Radio frequency cables - Part 0-1: Guide to the design of detail specifications - Coaxial cables

EN-FR

TC 46/SC 46A

IEC 60096-0-1:2012/AMD1:2017
Edition 3.0 (2017-01-25)
Amendment 1 - Radio frequency cables - Part 1- 0: Guide to the design of detail specifications - Coaxial cables

EN-FR

TC 46/SC 46A

IEC 60099-4:2014
Edition 3.0 (2014-06-30)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

EN-FR, ES

TC 37

IEC 60099-5:2018
Edition 3.0 (2018-01-19)
Surge arresters - Part 5: Selection and application recommendations

EN-FR, EN

TC 37

IEC 60099-6:2019
Edition 2.0 (2019-05-22)
Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - System voltage of 52 kV and less

EN-FR

TC 37

IEC 60099-8:2017
Edition 2.0 (2017-11-14)
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

EN-FR, EN

TC 37

IEC 60099-9:2014
Edition 1.0 (2014-06-26)
Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations

EN-FR

TC 37

IEC 60105:1958
Edition 1.0 (1958-01-01)
Recommendation for commercial-purity aluminium busbar material

EN-FR

TC 7

IEC 60110-1:1998
Edition 1.0 (1998-06-10)
Power capacitors for induction heating installations - Part 1: General

EN-FR, ES

TC 33

IEC TS 60110-2:2000
Edition 1.0 (2000-02-24)
Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses

EN-FR

TC 33

IEC 60112:2020
Edition 5.0 (2020-10-28)
Method for the determination of the proof and the comparative tracking indices of solid insulating materials

EN-FR

TC 112

IEC 60114:1959
Edition 1.0 (1959-01-01)
Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type

EN-FR

TC 7

IEC 60122-1:2002
Edition 3.0 (2002-08-09)
Quartz crystal units of assessed quality - Part 1: Generic specification

EN-FR

TC 49

IEC 60122-1:2002/AMD1:2017
Edition 3.0 (2017-12-08)
Amendment 1 - Quartz crystal units of assessed quality - Part 1: Generic specification

EN-FR, EN

TC 49

IEC 60122-2:1983
Edition 2.0 (1983-01-01)
Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection

EN-FR, RU

TC 49

IEC 60122-2-1:1991
Edition 1.0 (1991-07-22)
Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply

EN-FR

TC 49

IEC 60122-2-1:1991/AMD1:1993
Edition 1.0 (1993-09-06)
Amendment 1 - Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection - Section One: Quartz crystal units for microprocessor clock supply

EN-FR

TC 49

IEC 60122-3:2010
Edition 4.0 (2010-10-11)
Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections

EN-FR

TC 49

IEC 60122-4:2019
Edition 1.0 (2019-01-24)
Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors

EN-FR

TC 49

IEC 60130-1:1988
Edition 2.0 (1988-11-10)
Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

EN-FR, RU

TC 48/SC 48B

IEC 60130-5:1966
Edition 1.0 (1966-01-01)
Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

EN-FR, RU

TC 48/SC 48B

IEC 60130-9:2011
Edition 4.0 (2011-02-23)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

EN-FR

TC 48/SC 48B

IEC 60130-10:1971
Edition 1.0 (1971-01-01)
Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

EN-FR, RU

TC 48/SC 48B

IEC 60130-12:1976
Edition 2.0 (1976-01-01)
Connectors for frequencies below 3 MHz - Part 12: Link and test connectors

EN-FR, RU

TC 48/SC 48B

IEC 60130-17:1998
Edition 1.0 (1998-02-12)
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

EN-FR

TC 48/SC 48B

IEC 60136:1986
Edition 2.0 (1986-06-30)
Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60136:1986/AMD1:1995
Edition 2.0 (1995-04-26)
Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60137:2017
Edition 7.0 (2017-06-22)
Insulated bushings for alternating voltages above 1000 V

EN-FR, ES

TC 36/SC 36A

IEC 60137:2017/COR1:2018
Edition 7.0 (2018-05-07)
Corrigendum 1 - Insulated bushings for alternating voltages above 1 000 V

EN-FR

TC 36/SC 36A

IEC 60143-1:2015
Edition 5.0 (2015-06-25)
Series capacitors for power systems - Part 1: General

EN-FR

TC 33

IEC 60143-1:2015/COR1:2017
Edition 5.0 (2017-04-26)
Corrigendum 1 - Series capacitors for power systems - Part 1: General

EN-FR

TC 33

IEC 60143-2:2012
Edition 2.0 (2012-12-11)
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

EN-FR

TC 33

IEC 60143-2:2012/AMD1:2021
Edition 2.0 (2021-09-02)
Amendment 1 - Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

EN-FR

TC 33

IEC 60143-3:2015
Edition 2.0 (2015-06-09)
Series capacitors for power systems - Part 3: Internal fuses

EN-FR

TC 33

IEC 60143-4:2010
Edition 1.0 (2010-11-25)
Series capacitors for power systems - Part 4: Thyristor controlled series capacitors

EN-FR

TC 33

IEC 60146-1-1:2009
Edition 4.0 (2009-06-29)
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

EN-FR

TC 22

IEC TR 60146-1-2:2019
Edition 5.0 (2019-10-22)
Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines

EN

TC 22

IEC 60146-2:1999
Edition 2.0 (1999-11-18)
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

EN-FR

TC 22

IEC 60155:1993
Edition 4.0 (1993-11-30)
Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60155:1993/AMD1:1995
Edition 4.0 (1995-10-17)
Amendment 1 - Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60155:1993/AMD2:2006
Edition 4.0 (2006-11-27)
Amendment 2 - Glow-starters for fluorescent lamps

EN-FR, EN, FR, ES

TC 34/SC 34A

IEC 60168:1994+AMD1:1997+AMD2:2000 CSV
Edition 4.2 (2001-04-19)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR

TC 36

IEC 60168:1994
Edition 4.0 (1994-11-16)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60168:1994/AMD1:1997
Edition 4.0 (1997-06-24)
Amendment 1 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60168:1994/AMD2:2000
Edition 4.0 (2000-10-18)
Amendment 2 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

EN-FR, ES

TC 36

IEC 60172:2020
Edition 5.0 (2020-11-23)
Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires

EN-FR, ES

TC 55

IEC 60188:2001
Edition 3.0 (2001-05-30)
High-pressure mercury vapour lamps - Performance specifications

EN-FR, ES

TC 34/SC 34A

IEC 60189-1:2018
Edition 4.0 (2018-06-22)
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

EN

TC 46/SC 46C

IEC 60189-2:2007
Edition 4.0 (2007-05-23)
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations

EN, ES

TC 46/SC 46C

IEC 60189-3:2007
Edition 4.0 (2007-05-23)
Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

EN

TC 46/SC 46C

IEC 60191-1:2018
Edition 3.0 (2018-01-23)
Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices

EN-FR, EN

TC 47/SC 47D

IEC 60191-2:1966
Edition 1.0 (1966-01-01)
Mechanical standardization of semiconductor devices. Part 2: Dimensions

EN-FR, RU

TC 47/SC 47D

IEC 60191-2:1966/AMD1:2001
Edition 1.0 (2001-03-15)
Amendment 1 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD2:2001
Edition 1.0 (2001-06-20)
Amendment 2 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD3:2001
Edition 1.0 (2001-08-28)
Amendment 3 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD4:2001
Edition 1.0 (2001-11-27)
Amendment 4 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD5:2002
Edition 1.0 (2002-02-12)
Amendment 5 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD6:2002
Edition 1.0 (2002-05-01)
Amendment 6 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD7:2002
Edition 1.0 (2002-05-10)
Amendment 7 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD8:2003
Edition 1.0 (2003-06-27)
Amendment 8 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD9:2003
Edition 1.0 (2003-11-19)
Amendment 9 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD10:2004
Edition 1.0 (2004-03-29)
Amendment 10 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD11:2004
Edition 1.0 (2004-11-23)
Amendment 11 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD12:2006
Edition 1.0 (2006-03-24)
Amendment 12 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD13:2006
Edition 1.0 (2006-07-17)
Amendment 13 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD14:2006
Edition 1.0 (2006-07-17)
Amendment 14 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD15:2006
Edition 1.0 (2006-07-17)
Amendment 15 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD16:2007
Edition 1.0 (2007-07-25)
Amendment 16 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD17:2008
Edition 1.0 (2008-05-27)
Amendment 17 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD18:2011
Edition 1.0 (2011-11-22)
Amendment 18 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD19:2012
Edition 1.0 (2012-10-02)
Amendment 19 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2:1966/AMD20:2018
Edition 1.0 (2018-04-12)
Amendment 20 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN

TC 47/SC 47D

IEC 60191-2:1966/AMD21:2020
Edition 1.0 (2020-02-13)
Amendment 21 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN

TC 47/SC 47D

IEC 60191-3:1999
Edition 2.0 (1999-10-29)
Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits

EN-FR, ES

TC 47/SC 47D

IEC 60191-4:2013
Edition 3.0 (2013-10-10)
Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages

EN-FR

TC 47/SC 47D

IEC 60191-4:2013/AMD1:2018
Edition 3.0 (2018-03-27)
Amendment 1 - Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages

EN-FR

TC 47/SC 47D

IEC 60191-5:1997
Edition 2.0 (1997-04-23)
Mechanical standardization of semiconductor devices - Part 5: Recommendations applying to integrated circuit packages using tape automated bonding (TAB)

EN-FR

TC 47/SC 47D

IEC 60191-6:2009
Edition 3.0 (2009-11-26)
Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages

EN-FR

TC 47/SC 47D

IEC 60191-6-1:2001
Edition 1.0 (2001-10-30)
Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals

EN, ES

TC 47/SC 47D

IEC 60191-6-2:2001
Edition 1.0 (2001-12-11)
Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor devices packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages

EN-FR, EN, ES

TC 47/SC 47D

IEC 60191-6-2:2001/COR1:2002
Edition 1.0 (2002-10-18)
Corrigendum 1 - Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages

EN

TC 47/SC 47D

IEC 60191-6-3:2000
Edition 1.0 (2000-09-29)
Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)

EN-FR, EN

TC 47/SC 47D

IEC 60191-6-4:2003
Edition 1.0 (2003-06-11)
Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)

EN-FR, EN

TC 47/SC 47D

IEC 60191-6-5:2001
Edition 1.0 (2001-08-27)
Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array (FBGA)

EN, ES

TC 47/SC 47D

IEC 60191-6-6:2001
Edition 1.0 (2001-03-22)
Mechanical standardization of semiconductor devices - Part 6-6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch land grid array (FLGA)

EN-FR, EN

TC 47/SC 47D

IEC 60191-6-8:2001
Edition 1.0 (2001-08-27)
Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad flatpack (G-QFP)

EN-FR, EN, ES

TC 47/SC 47D

IEC 60191-6-10:2003
Edition 1.0 (2003-11-19)
Mechanical standardization of semiconductor devices - Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Dimensions of P-VSON

EN-FR, EN, ES

TC 47/SC 47D

IEC 60191-6-12:2011
Edition 2.0 (2011-06-08)
Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array (FLGA)

EN-FR

TC 47/SC 47D

IEC 60191-6-13:2016
Edition 2.0 (2016-09-27)
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)

EN-FR

TC 47/SC 47D

IEC 60191-6-16:2007
Edition 1.0 (2007-04-26)
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA

EN-FR, EN

TC 47/SC 47D

IEC 60191-6-17:2011
Edition 1.0 (2011-01-27)
Mechanical standardization of semiconductor devices - Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball grid array and fine-pitch land grid array (P-PFBGA and P-PFLGA)

EN-FR

TC 47/SC 47D

IEC 60191-6-18:2010
Edition 1.0 (2010-01-07)
Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)

EN-FR

TC 47/SC 47D

IEC 60191-6-18:2010/COR1:2010
Edition 1.0 (2010-05-31)
Corrigendum 1 - Mechanical stardardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)

EN-FR

TC 47/SC 47D

IEC 60191-6-18:2010/COR2:2010
Edition 1.0 (2010-07-28)
Corrigendum 2 - Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)

EN-FR

TC 47/SC 47D

IEC 60191-6-19:2010
Edition 1.0 (2010-02-25)
Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage

EN-FR

TC 47/SC 47D

IEC 60191-6-20:2010
Edition 1.0 (2010-08-30)
Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)

EN-FR

TC 47/SC 47D

IEC 60191-6-21:2010
Edition 1.0 (2010-08-30)
Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP)

EN-FR

TC 47/SC 47D

IEC 60191-6-22:2012
Edition 1.0 (2012-12-11)
Mechanical standardization of semiconductor devices - Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silicon Fine-pitch Land Grid Array (S-FBGA and S-FLGA)

EN-FR

TC 47/SC 47D

IEC 60191-2X:1999
Edition 1.0 (1999-09-30)
Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2X:1999/COR1:2000
Edition 1.0 (2000-01-31)
Corrigendum 1 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2Y:2000
Edition 1.0 (2000-06-16)
Twenty-third supplement - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60191-2Z:2000
Edition 1.0 (2000-09-29)
Twenty-fourth supplement - Mechanical standardization of semiconductor devices - Part 2: Dimensions

EN-FR

TC 47/SC 47D

IEC 60192:2001
Edition 3.0 (2001-05-22)
Low-pressure sodium vapour lamps - Performance specifications

EN-FR

TC 34/SC 34A

IEC 60196:2009
Edition 2.0 (2009-06-17)
IEC standard frequencies

EN-FR, ES

TC 8

IEC 60197:1965
Edition 1.0 (1965-01-01)
High-voltage connecting wire with flame retarding insulation for use in television receivers

EN-FR

TC 46

IEC 60204-1:2016
Edition 6.0 (2016-10-13)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements

EN-FR, ES

TC 44

IEC 60204-1:2016/AMD1:2021
Edition 6.0 (2021-09-15)
Amendment 1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements

EN-FR

TC 44

IEC 60204-11:2018
Edition 2.0 (2018-07-31)
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV

EN-FR, ES

TC 44

IEC 60204-31:2013
Edition 4.0 (2013-04-23)
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

EN-FR, ES

TC 44

IEC 60204-32:2008
Edition 2.0 (2008-03-10)
Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines

EN-FR, ES

TC 44

IEC 60204-33:2009
Edition 1.0 (2009-12-10)
Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment

EN-FR

TC 44

IEC TS 60204-34:2016
Edition 1.0 (2016-08-09)
Safety of machinery - Electrical equipment of machines - Part 34: Requirements for machine tools

EN

TC 44

IEC 60205:2016
Edition 4.0 (2016-11-18)
Calculation of the effective parameters of magnetic piece parts

EN-FR, EN

TC 51

IEC 60205:2016/COR1:2018
Edition 4.0 (2018-07-10)
Corrigendum 1 - Calculation of the effective parameters of magnetic piece parts

EN

TC 51

IEC 60212:2010
Edition 3.0 (2010-12-15)
Standard conditions for use prior to and during the testing of solid electrical insulating materials

EN-FR

TC 112

IEC 60214-1:2014
Edition 2.0 (2014-05-22)
Tap-changers - Part 1: Performance requirements and test methods

EN-FR, EN, ES

TC 14

IEC/IEEE 60214-2:2019
Edition 2.0 (2019-06-14)
Tap-changers - Part 2: Application guidelines

EN

TC 14

IEC 60216-1:2013
Edition 6.0 (2013-03-15)
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results

EN-FR

TC 112

IEC 60216-2:2005
Edition 4.0 (2005-08-11)
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

EN-FR

TC 112

IEC 60216-3:2021
Edition 3.0 (2021-03-16)
Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

EN-FR

TC 112

IEC 60216-4-1:2006
Edition 4.0 (2006-01-19)
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens

EN

TC 112

IEC 60216-4-2:2000
Edition 1.0 (2000-07-31)
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C

EN-FR, ES

TC 112

IEC 60216-4-3:2000
Edition 1.0 (2000-04-28)
Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens

EN-FR, ES

TC 112

IEC 60216-5:2008
Edition 3.0 (2008-03-11)
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

EN-FR

TC 112

IEC 60216-5:2008/COR1:2009
Edition 3.0 (2009-12-18)
Corrigendum 1 - Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

EN-FR

TC 112

IEC 60216-6:2006
Edition 2.0 (2006-05-29)
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method

EN-FR

TC 112

IEC TS 60216-7-1:2015
Edition 1.0 (2015-03-30)
Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy

EN

TC 112

IEC TR 60216-7-2:2016
Edition 1.0 (2016-08-25)
Electrical insulating materials - Thermal endurance properties - Part 7-2: Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data

EN

TC 112

IEC 60216-8:2013
Edition 1.0 (2013-03-15)
Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures

EN-FR

TC 112

IEC 60238:2016
Edition 9.0 (2016-07-14)
Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD1:2017
Edition 9.0 (2017-01-30)
Amendment 1 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD1:2017/COR1:2018
Edition 9.0 (2018-01-30)
Corrigendum 1 - Amendment 1 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60238:2016/AMD2:2020
Edition 9.0 (2020-01-20)
Amendment 2 - Edison screw lampholders

EN-FR

TC 34/SC 34B

IEC 60240-1:1992
Edition 2.0 (1992-07-31)
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

EN-FR

TC 34/SC 34A

IEC 60243-1:2013
Edition 3.0 (2013-03-26)
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies

EN-FR

TC 112

IEC 60243-2:2013
Edition 3.0 (2013-11-26)
Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

EN-FR

TC 112

IEC 60243-3:2013
Edition 3.0 (2013-11-26)
Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests

EN-FR

TC 112

IEC 60246:1967
Edition 1.0 (1967-01-01)
Connecting wires having a rated voltage of 20 kV and 25 kV d.c. anda maximum working temperature of 105 °C for use in televisionreceivers

EN-FR

TC 46

IEC 60252-1:2010
Edition 2.0 (2010-09-29)
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

EN-FR, ES

TC 33

IEC 60252-1:2010/AMD1:2013
Edition 2.0 (2013-08-29)
Amendment 1 - AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

EN-FR, ES

TC 33

IEC 60252-2:2010
Edition 2.0 (2010-12-15)
AC motor capacitors - Part 2: Motor start capacitors

EN-FR, ES

TC 33

IEC 60252-2:2010/AMD1:2013
Edition 2.0 (2013-08-29)
Amendment 1 - AC motor capacitors - Part 2: Motor start capacitors

EN-FR, ES

TC 33

IEC 60258:1968
Edition 1.0 (1968-01-01)
Direct acting recording electrical measuring instruments and their accessories

EN-FR

TC 85

IEC 60258:1968/AMD1:1976
Edition 1.0 (1976-01-01)
Amendment 1 - Direct acting recording electrical measuring instruments and their accessories

EN-FR

TC 85

IEC 60264-1:1968
Edition 1.0 (1968-01-01)
Packaging of winding wires. Part 1: Containers for round winding wires

EN-FR, ES, RU

TC 55

IEC 60264-1:1968/AMD1:2009
Edition 1.0 (2009-04-23)
Amendment 1 - Packaging of winding wires - Part 1: Containers for round winding wires

EN-FR, ES

TC 55

IEC 60264-2-1:1989
Edition 1.0 (1989-01-30)
Packaging of winding wires. Part 2: Cylindrical barrelled delivery spools. Section One: Basic dimensions

EN-FR, ES

TC 55

IEC 60264-2-1:1989/AMD1:2003
Edition 1.0 (2003-07-08)
Amendment 1 - Packaging of winding wires. Part 2: Cylindrical barrelled delivery spools. Section One: Basic dimensions

EN-FR, ES

TC 55

IEC 60264-2-2:1990
Edition 1.0 (1990-08-15)
Packaging of winding wires. Part 2: Cylindrical barrelled delivery spools. Section Two: Specification for returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-2-2:1990/AMD1:2003
Edition 1.0 (2003-12-19)
Amendment 1 - Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-2-3:1990
Edition 1.0 (1990-08-15)
Packaging of winding wires. Part 2: Cylindrical barrelled delivery spools. Section Three: Specification for non-returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-2-3:1990/AMD1:2003
Edition 1.0 (2003-12-19)
Amendment 1 - Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-3-1:1999+AMD1:2003 CSV
Edition 2.1 (2009-08-28)
Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions

EN-FR

TC 55

IEC 60264-3-1:1999
Edition 2.0 (1999-12-17)
Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions

EN-FR, ES

TC 55

IEC 60264-3-1:1999/AMD1:2003
Edition 2.0 (2003-08-21)
Amendment 1 - Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions

EN-FR, ES

TC 55

IEC 60264-3-2:1999
Edition 2.0 (1999-04-28)
Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials

EN-FR, ES

TC 55

IEC 60264-3-3:1990
Edition 1.0 (1990-08-15)
Packaging of winding wires. Part 3: Taper barrelled delivery spools. Section Three: Specification for non-returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-3-3:1990/AMD1:2003
Edition 1.0 (2003-12-11)
Amendment 1 - Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-3-4:1999
Edition 2.0 (1999-04-23)
Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools

EN-FR, ES

TC 55

IEC 60264-3-5:1999
Edition 2.0 (1999-04-23)
Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material

EN-FR, ES

TC 55

IEC 60264-4-1:1997+AMD1:2009 CSV
Edition 2.1 (2009-06-25)
Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials

EN-FR, ES

TC 55

IEC 60264-4-1:1997
Edition 2.0 (1997-12-15)
Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials

EN-FR

TC 55

IEC 60264-4-1:1997/AMD1:2009
Edition 2.0 (2009-04-23)
Amendment 1 - Packaging of winding wires - Part 4-1: Methods of test - Delivery spools made from thermoplastic materials

EN-FR

TC 55

IEC 60264-4-2:1992
Edition 1.0 (1992-08-31)
Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools

EN-FR, ES

TC 55

IEC 60264-4-2:1992/AMD1:2003
Edition 1.0 (2003-12-11)
Amendment 1 - Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools

EN-FR, ES

TC 55

IEC 60264-5-1:1997+AMD1:2003 CSV
Edition 1.1 (2009-08-28)
Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions

EN-FR

TC 55

IEC 60264-5-1:1997
Edition 1.0 (1997-06-05)
Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions

EN-FR, ES

TC 55

IEC 60264-5-1:1997/AMD1:2003
Edition 1.0 (2003-08-21)
Amendment 1 - Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions

EN-FR, ES

TC 55

IEC 60264-5-2:2001
Edition 1.0 (2001-03-22)
Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material

EN-FR, ES

TC 55

IEC 60270:2000
Edition 3.0 (2000-12-21)
High-voltage test techniques - Partial discharge measurements

EN-FR, EN, FR, ES

TC 42

IEC 60270:2000/COR1:2001
Edition 3.0 (2001-10-24)
Corrigendum 1 - High-voltage test techniques - Partial discharge measurements

EN-FR

TC 42

IEC 60270:2000/AMD1:2015
Edition 3.0 (2015-11-27)
Amendment 1 - High-voltage test techniques - Partial discharge measurements

EN-FR, ES

TC 42

IEC 60276:2018
Edition 2.0 (2018-05-08)
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

EN-FR

TC 2

IEC 60287-1-1:2006
Edition 2.0 (2006-12-13)
Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General

EN-FR, EN, FR, ES

TC 20

IEC 60287-1-1:2006/AMD1:2014
Edition 2.0 (2014-11-13)
Amendment 1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General

EN-FR, ES

TC 20

IEC 60287-1-2:1993
Edition 1.0 (1993-12-09)
Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation

EN-FR, EN, FR, ES

TC 20

IEC 60287-1-3:2002
Edition 1.0 (2002-05-21)
Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses

EN-FR, EN, FR

TC 20

IEC 60287-2-1:2015
Edition 2.0 (2015-04-09)
Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of the thermal resistance

EN-FR

TC 20

IEC 60287-2-2:1995
Edition 1.0 (1995-05-11)
Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation

EN-FR, EN, FR, ES

TC 20

IEC 60287-2-3:2017
Edition 1.0 (2017-04-11)
Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels

EN-FR

TC 20

IEC 60287-3-1:2017
Edition 2.0 (2017-06-08)
Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions

EN-FR, ES

TC 20

IEC 60287-3-2:2012
Edition 2.0 (2012-07-04)
Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size

EN-FR

TC 20

IEC 60287-3-3:2007
Edition 1.0 (2007-05-15)
Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources

EN-FR, ES

TC 20

IEC 60297-3-100:2008
Edition 1.0 (2008-11-26)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets

EN-FR

TC 48/SC 48D

IEC 60297-3-101:2004
Edition 1.0 (2004-08-17)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units

EN-FR, EN

TC 48/SC 48D

IEC 60297-3-102:2004
Edition 1.0 (2004-08-17)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle

EN-FR, EN

TC 48/SC 48D

IEC 60297-3-103:2004
Edition 1.0 (2004-08-17)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin

EN

TC 48/SC 48D

IEC 60297-3-104:2006
Edition 1.0 (2006-05-09)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units

EN-FR

TC 48/SC 48D

IEC 60297-3-105:2008
Edition 1.0 (2008-11-26)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis

EN-FR

TC 48/SC 48D

IEC 60297-3-106:2010
Edition 1.0 (2010-03-16)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1

EN-FR

TC 48/SC 48D

IEC 60297-3-107:2012
Edition 1.0 (2012-01-10)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor

EN-FR

TC 48/SC 48D

IEC 60297-3-108:2014
Edition 1.0 (2014-09-09)
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of R-type subracks and plug-in units

EN-FR

TC 48/SC 48D

IEC 60297-3-109:2015
Edition 1.0 (2015-11-23)
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-109: Dimensions of chassis for embedded computing devices

EN-FR

TC 48/SC 48D

IEC 60297-3-110:2018
Edition 1.0 (2018-08-15)
Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses

EN-FR

TC 48/SC 48D

IEC 60304:1982
Edition 3.0 (1982-01-01)
Standard colours for insulation for low-frequency cables and wires

EN-FR, EN, FR

TC 46/SC 46C

IEC 60309-1:2021
Edition 5.0 (2021-06-18)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements

EN-FR

TC 23/SC 23H

IEC 60309-2:2021
Edition 5.0 (2021-06-18)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories

EN-FR

TC 23/SC 23H

IEC 60309-4:2021
Edition 2.0 (2021-06-18)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock

EN-FR

TC 23/SC 23H

IEC 60309-5:2017
Edition 1.0 (2017-01-24)
Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)

EN-FR, ES

TC 23/SC 23H

IEC 60310:2016
Edition 4.0 (2016-01-27)
Railway applications - Traction transformers and inductors on board rolling stock

EN-FR, ES

TC 9

IEC 60310:2016/COR1:2018
Edition 4.0 (2018-02-14)
Corrigendum 1 - Railway applications - Traction transformers and inductors on board rolling stock

EN-FR

TC 9

IEC 60311:2016
Edition 5.0 (2016-12-16)
Electric irons for household or similar use - Methods for measuring performance

EN-FR, ES

TC 59/SC 59L

IEC 60313:2002
Edition 3.0 (2002-04-30)
Coaxial connectors used in nuclear laboratory instrumentation

EN-FR

TC 45

IEC 60317-0-1:2013
Edition 4.0 (2013-10-07)
Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire

EN-FR, ES

TC 55

IEC 60317-0-1:2013/AMD1:2019
Edition 4.0 (2019-08-20)
Amendment 1 - Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire

EN-FR, ES

TC 55

IEC 60317-0-2:2020
Edition 4.0 (2020-06-10)
Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire

EN-FR, ES

TC 55

IEC 60317-0-3:2008
Edition 3.0 (2008-04-29)
Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire

EN-FR, ES

TC 55

IEC 60317-0-3:2008/AMD1:2013
Edition 3.0 (2013-09-26)
Amendment 1 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminum wire

EN-FR, ES

TC 55

IEC 60317-0-3:2008/AMD2:2019
Edition 3.0 (2019-08-20)
Amendment 2 - Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire

EN-FR, ES

TC 55

IEC 60317-0-4:2020
Edition 4.0 (2020-04-27)
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire

EN-FR, ES

TC 55

IEC 60317-0-6:2020
Edition 2.0 (2020-06-09)
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire

EN-FR, ES

TC 55

IEC 60317-0-7:2017
Edition 2.0 (2017-08-16)
Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire

EN-FR, ES

TC 55

IEC 60317-0-8:2019
Edition 2.0 (2019-08-20)
Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire

EN-FR, ES

TC 55

IEC 60317-0-9:2015
Edition 1.0 (2015-05-05)
Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire

EN-FR, ES

TC 55

IEC 60317-0-10:2017
Edition 1.0 (2017-05-04)
Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire

EN-FR, ES

TC 55

IEC 60317-1:2010
Edition 4.0 (2010-03-10)
Specifications for particular types of winding wires - Part 1: Polyvinyl acetal enamelled round copper wire, class 105

EN-FR

TC 55

IEC 60317-2:2019
Edition 5.0 (2019-08-08)
Specifications for particular types of winding wires - Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer

EN-FR

TC 55

IEC 60317-8:2010
Edition 4.0 (2010-03-10)
Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180

EN-FR, ES

TC 55

IEC 60317-12:2020
Edition 4.0 (2020-06-05)
Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120

EN-FR, ES

TC 55

IEC 60317-13:2010
Edition 3.0 (2010-03-18)
Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200

EN-FR, ES

TC 55

IEC 60317-15:2004+AMD1:2010 CSV
Edition 3.1 (2010-06-16)
Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180

EN-FR

TC 55

IEC 60317-15:2004
Edition 3.0 (2004-08-24)
Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180

EN-FR, ES

TC 55

IEC 60317-15:2004/AMD1:2010
Edition 3.0 (2010-02-18)
Amendment 1 - Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180

EN-FR, ES

TC 55

IEC 60317-17:2020
Edition 4.0 (2020-06-05)
Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105

EN-FR, ES

TC 55

IEC 60317-18:2020
Edition 4.0 (2020-06-05)
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120

EN-FR, ES

TC 55

IEC 60317-20:2013
Edition 3.0 (2013-10-10)
Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155

EN-FR, ES

TC 55

IEC 60317-20:2013/AMD1:2019
Edition 3.0 (2019-06-12)
Amendment 1 - Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155

EN-FR, ES

TC 55

IEC 60317-21:2013
Edition 3.0 (2013-10-10)
Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155

EN-FR, ES

TC 55

IEC 60317-21:2013/AMD1:2019
Edition 3.0 (2019-06-12)
Amendment 1 - Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155

EN-FR, ES

TC 55

IEC 60317-22:2004+AMD1:2009 CSV
Edition 3.1 (2010-02-25)
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180

EN-FR

TC 55

IEC 60317-22:2004
Edition 3.0 (2004-08-24)
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180

EN-FR, ES

TC 55

IEC 60317-22:2004/AMD1:2009
Edition 3.0 (2009-12-17)
Amendment 1 - Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180

EN-FR, ES

TC 55

IEC 60317-23:2013
Edition 3.0 (2013-10-10)
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180

EN-FR, ES

TC 55

IEC 60317-23:2013/AMD1:2019
Edition 3.0 (2019-06-12)
Amendment 1 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180

EN-FR, ES

TC 55

IEC 60317-25:2020
Edition 4.0 (2020-06-09)
Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200

EN-FR, ES

TC 55

IEC 60317-27-1:2020
Edition 1.0 (2020-05-27)
Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire

EN-FR, ES

TC 55

IEC 60317-27-2:2020
Edition 1.0 (2020-06-10)
Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire

EN-FR, ES

TC 55

IEC 60317-27-3:2019
Edition 1.0 (2019-11-13)
Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire

EN-FR, ES

TC 55

IEC 60317-27-4:2020
Edition 1.0 (2020-05-27)
Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire

EN-FR, ES

TC 55

IEC 60317-28:2013
Edition 2.0 (2013-10-10)
Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180

EN-FR, ES

TC 55

IEC 60317-29:1990
Edition 1.0 (1990-10-15)
Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

EN-FR, ES

TC 55

IEC 60317-29:1990/AMD1:1997
Edition 1.0 (1997-12-22)
Amendment 1 - Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

EN-FR, ES

TC 55

IEC 60317-29:1990/AMD2:2010
Edition 1.0 (2010-04-26)
Amendment 2 - Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200

EN-FR, ES

TC 55

IEC 60317-31:2015
Edition 2.0 (2015-10-22)
Specifications for particular types of winding wires - Part 31: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180