SDG 7 - Affordable and clean energy

Ensure access to affordable, reliable, sustainable and modern energy for all

Energy – the golden thread

Energy, and especially electricity, is the golden thread that impacts all SDGs. The United Nations has recognized energy as the cornerstone for economic development, facilitating poverty and hunger reduction efforts, improving healthcare, education and empowering women.

IEC work is essential in providing affordable and reliable energy services, both off-grid and on-grid and in upgrading and expanding a reliable energy infrastructure. It provides the foundation for testing, certification and for the measurement of energy efficiency.

IEC International Standards enable technology transfer and the broad roll-out of more efficient technologies. They underpin energy infrastructure investment for example by the World Bank.

IEC work provides the solid foundation for the whole energy chain, and all equipment that is driven by electricity. Over 160 IEC TC/SCs directly contribute to SDG 7. With nearly 3 000 standards and all four IEC CA Systems, IEC work covers all forms of power generation, both on-grid and off-grid, from traditional (hydro, coal, gas, oil, nuclear) to all renewable energy sources (wind, solar, marine, geothermal, etc.).

IEC International Standards allow all countries to benefit from the technology transfer of more energy efficient technologies.

iec_for_sdgs-cover.jpg

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

IEC work addresses topics related to energy

Energy access

Energy access

Solar energy

Solar energy

Nuclear power

Nuclear power

Energy storage and batteries

Energy storage and batteries

Transportation (train, metro, bus, skytrains, etc.)

Transportation (train, metro, bus, skytrains, etc.)

Lighting

Lighting

Wind energy

Wind energy

Generation from fossil fuels

Generation from fossil fuels (coal, gas, oil)

Microgrids

Microgrids

Electric vehicles and charging infrastructure

Electric vehicles and charging infrastructure

Power transmission

Power transmission

Marine energy

Marine energy

Rural and off-grid electrification

Rural and off-grid electrification

Industrial processes

Industrial processes

Electric motors and generators

Electric motors and generators

Power distribution

Power distribution

Hydrogen

Hydrogen

LVDC

LVDC

Energy efficiency technologies

Energy efficiency technologies

IEC work directly impacts the following SDG targets

7.1 Access to affordable, reliable energy services

IEC work in standardization and conformity assessment helps governments and industry build off-grid and on-grid energy generation and distribution systems that are interoperable and resilient. It enables innovation and helps address the energy challenge by facilitating the transition to renewable energy. The IEC has also published several hundred standards that underpin energy efficient technologies and directly impact the energy efficiency of devices and systems.

  • CISPR and 7 SCs: International special committee on radio interference;
  • IEC TC 2: Electric motors;
  • IEC TC 4: Hydroelectric power generation;
  • IEC TC 5: Steam turbines;
  • IEC TC 7: Overhead electrical conductors;
  • IEC TC 8 and 2 SCs: System aspects of electrical energy supply;
  • IEC TC 10: Insulating fluids for electrotechnical applications;
  • IEC TC 11: Overhead lines;
  • IEC TC 13: Electrical energy measurement and control;
  • IEC TC 14: Power transformers;
  • IEC TC 15: Electrical insulating materials;
  • IEC TC 17 and 2 SCs: High voltage switchgear and control gear;
  • IEC TC 18: Electrical installations and cables of ships and off shore unit;
  • IEC TC 20: Electric cables;
  • IEC TC 21: Secondary cells and batteries;
  • IEC TC 22 and 4 SCs: Power electronic systems and equipment;
  • IEC TC 23 and 7 SCs: Electrical accessories for household, industrial and other applications (cable systems, plugs, sockets, incl. for electric vehicles, switches, circuit breakers, etc.);
  • IEC TC 26: Electric welding;
  • IEC TC 27: Industrial electroheating and electromagnetic processing;
  • IEC TC 32 and 3 SCs: Fuses;
  • IEC TC 33: Power capacitors;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC TC 35: Primary cells and batteries (incl. for energy storage);
  • IEC TC 36 and 1 SC: Insulators;
  • IEC TC 37 and 2 SCs: Surge arresters;
  • IEC TC 38: Instrument transformers;
  • IEC TC 40: Capacitors and resistors for electronic equipment;
  • IEC TC 45 and 2 SCs: Nuclear instrumentation;
  • IEC TC 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
  • IEC TC 47 and 4 SCs: Semiconductor devices (sensors);
  • IEC TC 51: Magnetic components, ferrite and magnetic powder materials;
  • IEC TC 55: Winding wires;
  • IEC TC 56: Dependability;
  • IEC TC 57: Power systems management and information exchange including cyber security;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 65 and 4 SCs: Industrial process measurement, control and automation;
  • IEC TC 70: Degrees of protection provided by enclosures;
  • IEC TC 72: Automatic electrical controls;
  • IEC TC 73: Short-circuit currents;
  • IEC TC 78: Live working;
  • IEC TC 85: Measuring equipment for electrical and electromagnetic quantities;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 90: Superconductivity;
  • IEC TC 91: Electronics assembly technology;
  • IEC TC 94: All-or-nothing electrical relays;
  • IEC TC 95: Measuring relays and protection equipment;
  • IEC TC 96: Transformers, reactors, power supply units;
  • IEC TC 99: Insulation co-ordination and system engineering of high voltage electrical power installations above 1,0 kV AC and 1,5 kV DC;
  • IEC TC 100 and 12 TAs: Audio, video and multimedia systems and equipment;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 105: Fuel cell technologies;
  • IEC TC 112: Evaluation and qualification of electrical insulating materials and systems;
  • IEC TC 113: Nanotechnology for electrotechnical products and systems;
  • IEC TC 115: High voltage direct current (HVDC) transmission for DC voltages above 100 kV;
  • IEC TC 120: Electrical energy storage systems;
  • IEC TC 121 and 2 SCs: Low-voltage switchgear and controlgear;
  • IEC TC 122: Ultra-high voltage alternating current (UHVAC) transmission systems;
  • IEC TC 123: Management of power systems assets;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • ISO/IEC JTC 1 and 22 SCs: Information technology

7.2 Off-grid and on-grid solar, wind, marine, hydro – small and big

IEC work covers off-grid and on-grid use of good quality renewable solar, wind, marine, hydro energy generation, both small and big scale.

  • IEC TC 2: Electric motors;
  • IEC TC 7: Overhead electrical conductors;
  • IEC TC 8 and 2 SCs: System aspects of electrical energy supply;
  • IEC TC 11: Overhead lines;
  • IEC TC 13: Electrical energy measurement and control;
  • IEC TC 14: Power transformers;
  • IEC TC 15: Electrical insulating materials;
  • IEC TC 20: Electric cables;
  • IEC TC 21: Secondary cells and batteries;
  • IEC TC 22 and 4 SCs: Power electronic systems and equipment;
  • IEC TC 23 and 7 SCs: Electrical accessories for household, industrial and other applications (cable systems, plugs, sockets, incl. for electric vehicles, switches, circuit breakers, etc.);
  • IEC TC 32 and 3 SCs: Fuses;
  • IEC TC 33: Power capacitors;
  • IEC TC 34 and 4 SCs: Lamps and related equipment;
  • IEC TC 35: Primary cells and batteries (incl. for energy storage);
  • IEC TC 36 and 1 SC: Insulators;
  • IEC TC 37 and 2 SCs: Surge arresters;
  • IEC TC 38: Instrument transformers;
  • IEC TC 40: Capacitors and resistors for electronic equipment;
  • IEC TC 46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories;
  • IEC TC 47 and 4 SCs: Semiconductor devices (sensors);
  • IEC TC 51: Magnetic components, ferrite and magnetic powder materials;
  • IEC TC 55: Winding wires;
  • IEC TC 56: Dependability;
  • IEC TC 57: Power systems management and information exchange including cyber security;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 70: Degrees of protection provided by enclosures;
  • IEC TC 72: Automatic electrical controls;
  • IEC TC 73: Short-circuit currents;
  • IEC TC 78: Live working;
  • IEC TC 82: Solar PV panels and lighting;
  • IEC TC 85: Measuring equipment for electrical and electromagnetic quantities;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 88: Wind energy generation;
  • IEC TC 94: All-or-nothing electrical relays;
  • IEC TC 95: Measuring relays and protection equipment;
  • IEC TC 96: Transformers, reactors, power supply units;
  • IEC TC 105: Fuel cell technologies;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 112: Evaluation and qualification of electrical insulating materials and systems;
  • IEC TC 113: Nanotechnology for electrotechnical products and systems;
  • IEC TC 114: Marine energy;
  • IEC TC 117: Solar thermal electric plants;
  • IEC TC 120: Electrical energy storage systems;
  • IEC TC 121 and 2 SCs: Low-voltage switchgear and controlgear;
  • IEC PC 118: Smart grid user interface;
  • IEC SyC LVDC: Low voltage direct current installations and electricity access;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy.

7.3 Foundation for testing, certification, comparison of energy efficiency – enable broad roll-out and technology transfer

IEC International Standards contain the methodologies and processes that are used by the four IEC CA Systems: IECEE, IECEx, IECQ, IECRE to test and compare the efficiency, resilience, durability, reliability and safety of all types of energy related technologies and systems.

  • IEC TC 13: Electrical energy measurement and control;
  • IEC TC 15: Electrical insulating materials;
  • IEC TC 21: Secondary cells and batteries;
  • IEC TC 25: Quantities and units;
  • IEC TC 35: Primary cells and batteries (incl. for energy storage);
  • IEC TC 42: High-voltage and high-current test techniques;
  • IEC TC 47 and 4 SCs: Semiconductor devices (sensors);
  • IEC TC 56: Dependability;
  • IEC TC 59 and 7 SCs: Performance of household and similar electrical appliances;
  • IEC TC 61 and 5 SCs: Safety of household and similar electrical appliances;
  • IEC TC 64: Electrical installations and protection against electric shock;
  • IEC TC 65 and 4 SCs: Industrial process measurement, control and automation;
  • IEC TC 70: Degrees of protection provided by enclosures;
  • IEC TC 72: Automatic electrical controls;
  • IEC TC 85: Measuring equipment for electrical and electromagnetic quantities;
  • IEC TC 88: Wind energy generation;
  • IEC TC 105: Fuel cell technologies;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 112: Evaluation and qualification of electrical insulating materials and systems;
  • IEC TC 114: Marine energy;
  • IEC TC 117: Solar thermal electric plants;
  • IEC TC 120: Electrical energy storage systems;
  • IEC PC 118: Smart grid user interface;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres;
  • IECQ: IEC Quality Assessment System for Electronic Components;
  • IECRE: IEC System for Certification to Standards Relating to Equipment for Use in Renewable Energy Applications;

7.A Foundation for energy research and technology, including energy efficiency. Underpin energy infrastructure investment

IEC International Standards contain the methodologies, processes and specifications that enable energy efficient technologies and systems. They are used to compare, verify and certify energy efficiency claims of individual devices and systems. They reassure investors and insurers that systems are built to world’s best-practice and are often referred to in tenders of the World Bank.

  • IEC TC 13: Electrical energy measurement and control;
  • IEC TC 15: Electrical insulating materials;
  • IEC TC 42: High-voltage and high-current test techniques;
  • IEC TC 56: Dependability;
  • IEC TC 69: Electric road vehicles and industrial trucks;
  • IEC TC 85: Measuring equipment for electrical and electromagnetic quantities.

7.B Upgrade and expand energy infrastructure. Reduce cost and assure long-term viability

Many IEC International Standards from more than 160 TC/SCs serve to build or upgrade energy infrastructure. They stimulate natural competition which helps reduce cost and ensure consistent quality and long-term reliability.

  • IEC TC 2: Electric motors;
  • IEC TC 4: Hydroelectric power generation;
  • IEC TC 7: Overhead electrical conductors;
  • IEC TC 8 and 2 SCs: System aspects of electrical energy supply;
  • IEC TC 11: Overhead lines;
  • IEC TC 13: Electrical energy measurement and control;
  • IEC TC 20: Electric cables;
  • IEC TC 21: Secondary cells and batteries;
  • IEC TC 22 and 4 SCs: Power electronic systems and equipment;
  • IEC TC 56: Dependability;
  • IEC TC 57: Power systems management and information exchange including cyber security;
  • IEC TC 65 and 4 SCs: Industrial process measurement, control and automation;
  • IEC TC 69: Electric road vehicles and industrial trucks;
  • IEC TC 72: Automatic electrical controls;
  • IEC TC 82: Solar PV panels and lighting;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 88: Wind energy generation;
  • IEC TC 105: Fuel cell technologies;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 114: Marine energy;
  • IEC TC 117: Solar thermal electric plants;
  • IEC TC 120: Electrical energy storage systems;
  • IEC TC 122: Ultra-high voltage alternating current (UHVAC) transmission systems;
  • IEC TC 123: Management of power systems assets;
  • IEC PC 118: Smart grid user interface;
  • IEC SyC LVDC: Low voltage direct current installations and electricity access;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IEC SyC Smart energy: Smart energy;
  • ISO/IEC JTC 1 and 22 SCs: Information technology.

 

Anchor placeholder #data
  • Publications
  • Projects

Reference

Language

TC/SC

CISPR 16-1-1:2019
Edition 5.0 (2019-05-22)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

CISPR 16-1-2:2014
Edition 2.0 (2014-03-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

CISPR 16-1-2:2014/AMD1:2017
Edition 2.0 (2017-11-07)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

CISPR 16-1-3:2004
Edition 2.0 (2004-06-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-3:2004/COR1:2006
Edition 2.0 (2006-02-09)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-3:2004/AMD1:2016
Edition 2.0 (2016-03-31)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-3:2004/AMD2:2020
Edition 2.0 (2020-01-28)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-4:2019
Edition 4.0 (2019-01-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-4:2019/AMD1:2020
Edition 4.0 (2020-06-15)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-5:2014
Edition 2.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-5:2014/COR1:2020
Edition 2.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-5:2014/AMD1:2016
Edition 2.0 (2016-12-16)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-6:2014
Edition 1.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-1-6:2014/AMD1:2017
Edition 1.0 (2017-01-13)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-1-6:2014/AMD2:2022
Edition 1.0 (2022-03-03)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-2-1:2014
Edition 3.0 (2014-02-26)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-1:2014/COR1:2020
Edition 3.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-1:2014/AMD1:2017
Edition 3.0 (2017-06-30)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-2:2010
Edition 2.0 (2010-07-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

CISPR 16-2-3:2016
Edition 4.0 (2016-09-15)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-3:2016/AMD1:2019
Edition 4.0 (2019-06-25)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-4:2003
Edition 1.0 (2003-11-20)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

CISPR TR 16-2-5:2008
Edition 1.0 (2008-07-09)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-5: In situ measurements for disturbing emissions produced by physically large equipment

CISPR TR 16-3:2020
Edition 4.0 (2020-10-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports

CISPR TR 16-4-1:2009
Edition 2.0 (2009-02-23)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

CISPR 16-4-2:2011
Edition 2.0 (2011-06-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR 16-4-2:2011/COR1:2013
Edition 2.0 (2013-04-11)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrument uncertainty

CISPR 16-4-2:2011/AMD1:2014
Edition 2.0 (2014-02-14)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR 16-4-2:2011/AMD2:2018
Edition 2.0 (2018-08-15)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR 16-4-2:2011/AMD2:2018/COR1:2019
Edition 2.0 (2019-01-16)
Corrigendum 1 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR TR 16-4-3:2004+AMD1:2006 CSV
Edition 2.1 (2007-01-18)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR TR 16-4-3:2004
Edition 2.0 (2004-05-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR TR 16-4-3:2004/AMD1:2006
Edition 2.0 (2006-10-17)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR TR 16-4-4:2007
Edition 2.0 (2007-07-16)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

CISPR TR 16-4-4:2007/AMD1:2017
Edition 2.0 (2017-06-29)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services calculation of limits for the protection of radio services

CISPR TR 16-4-4:2007/AMD2:2020
Edition 2.0 (2020-04-23)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

CISPR TR 16-4-5:2006
Edition 1.0 (2006-10-25)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

CISPR TR 16-4-5:2006/AMD1:2014
Edition 1.0 (2014-07-21)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

CISPR TR 16-4-5:2006/AMD2:2021
Edition 1.0 (2021-10-29)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

CISPR 17:2011
Edition 2.0 (2011-06-10)
Methods of measurement of the suppression characteristics of passive EMC filtering devices

CISPR TR 31:2012
Edition 2.0 (2012-09-18)
Database on the characteristics of radio services

IEC 60028:1925
Edition 2.0 (1925-01-01)
International standard of resistance for copper

IEC 60034-2-1:2014
Edition 2.0 (2014-06-27)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

IEC 60034-2-2:2010
Edition 1.0 (2010-03-16)
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

IEC 60034-2-3:2020
Edition 1.0 (2020-03-19)
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

IEC 60034-3:2020
Edition 7.0 (2020-05-26)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

IEC 60034-4-1:2018
Edition 1.0 (2018-04-27)
Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests

IEC 60034-5:2020
Edition 5.0 (2020-04-29)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

IEC 60034-6:1991
Edition 2.0 (1991-10-01)
Rotating electrical machines - Part 6: Methods of cooling (IC Code)

IEC 60034-8:2007
Edition 3.0 (2007-06-22)
Rotating electrical machines - Part 8: Terminal markings and direction of rotation

IEC 60034-8:2007/AMD1:2014
Edition 3.0 (2014-03-20)
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation

IEC 60034-12:2016
Edition 3.0 (2016-11-23)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

IEC 60034-14:2018
Edition 4.0 (2018-08-17)
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

IEC 60034-15:2009
Edition 3.0 (2009-03-17)
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

IEC 60034-16-1:2011
Edition 2.0 (2011-05-25)
Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

IEC TR 60034-16-2:1991
Edition 1.0 (1991-02-15)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

IEC TS 60034-16-3:1996
Edition 1.0 (1996-02-14)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

IEC 60034-18-1:2010
Edition 2.0 (2010-03-10)
Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

IEC 60034-18-21:2012
Edition 2.0 (2012-09-19)
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

IEC 60034-18-31:2012
Edition 2.0 (2012-06-25)
Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

IEC 60034-18-32:2022
Edition 2.0 (2022-01-25)
Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings

IEC TS 60034-18-33:2010
Edition 2.0 (2010-07-22)
Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses

IEC 60034-18-34:2012
Edition 1.0 (2012-06-14)
Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

IEC 60034-18-41:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

IEC 60034-18-41:2014/AMD1:2019
Edition 1.0 (2019-06-25)
Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

IEC 60034-18-41:2014/AMD1:2019/COR1:2020
Edition 1.0 (2020-12-11)
Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

IEC 60034-18-42:2017
Edition 1.0 (2017-02-07)
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

IEC 60034-18-42:2017/AMD1:2020
Edition 1.0 (2020-08-18)
Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

IEC 60034-19:2014
Edition 2.0 (2014-09-25)
Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

IEC TS 60034-20-1:2002
Edition 1.0 (2002-01-18)
Rotating electrical machines - Part 20-1: Control motors - Stepping motors

IEC 60034-22:2009
Edition 2.0 (2009-10-28)
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

IEC 60034-23:2019
Edition 1.0 (2019-01-24)
Rotating electrical machines - Part 23: Repair, overhaul and reclamation

IEC TS 60034-24:2009
Edition 1.0 (2009-09-16)
Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

IEC 60034-26:2006
Edition 1.0 (2006-07-24)
Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

IEC 60034-26:2006/COR1:2014
Edition 1.0 (2014-09-03)
Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

IEC 60034-27-1:2017
Edition 1.0 (2017-12-13)
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

IEC TS 60034-27-2:2012
Edition 1.0 (2012-03-22)
Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

IEC 60034-27-3:2015
Edition 1.0 (2015-12-16)
Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

IEC 60034-27-4:2018
Edition 1.0 (2018-01-24)
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

IEC 60034-28:2012
Edition 2.0 (2012-12-13)
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

IEC 60034-29:2008
Edition 1.0 (2008-03-11)
Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

IEC 60034-30-1:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

IEC TS 60034-30-2:2016
Edition 1.0 (2016-12-08)
Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)

IEC TS 60034-32:2016
Edition 1.0 (2016-12-15)
Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings

IEC 60041:1991
Edition 3.0 (1991-11-30)
Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

IEC 60045-1:2020
Edition 2.0 (2020-05-13)
Steam turbines - Part 1: Specifications

IEC 60052:2002
Edition 3.0 (2002-10-15)
Voltage measurement by means of standard air gaps

IEC 60055-1:1997+AMD1:2005 CSV
Edition 5.1 (2005-05-12)
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories

IEC 60055-1:1997
Edition 5.0 (1997-05-16)
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories

IEC 60055-1:1997/AMD1:2005
Edition 5.0 (2005-02-07)
Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories

IEC 60055-2:1981
Edition 1.0 (1981-01-01)
Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements

IEC 60055-2:1981/AMD1:1989
Edition 1.0 (1989-09-15)
Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements

IEC 60055-2:1981/AMD2:2005
Edition 1.0 (2005-02-07)
Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements

IEC 60060-1:2010
Edition 3.0 (2010-09-29)
High-voltage test techniques - Part 1: General definitions and test requirements

IEC 60060-2:2010
Edition 3.0 (2010-11-29)
High-voltage test techniques - Part 2: Measuring systems

IEC 60061-1:2005 CSV
Edition 3.4 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD21:1998
Edition 3.0 (1998-03-16)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD22:1999
Edition 3.0 (1999-02-23)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD23:1999
Edition 3.0 (1999-07-29)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD24:2000
Edition 3.0 (2000-05-18)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD26:2001
Edition 3.0 (2001-02-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD27:2001
Edition 3.0 (2001-10-26)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD28:2002
Edition 3.0 (2002-05-03)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD29:2002
Edition 3.0 (2002-05-13)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD30:2002
Edition 3.0 (2002-10-29)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD31:2003
Edition 3.0 (2003-05-15)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD32:2003
Edition 3.0 (2003-09-03)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD33:2003
Edition 3.0 (2003-10-30)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD34:2004
Edition 3.0 (2004-07-26)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD35:2004
Edition 3.0 (2004-11-25)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD36:2005
Edition 3.0 (2005-10-03)
Amendment 36 to IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD37:2006
Edition 3.0 (2006-05-30)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD38:2006
Edition 3.0 (2006-12-14)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD39:2007
Edition 3.0 (2007-04-30)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD40:2008
Edition 3.0 (2008-07-18)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD41:2009
Edition 3.0 (2009-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD42:2009
Edition 3.0 (2009-07-24)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD43:2010
Edition 3.0 (2010-02-22)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD44:2010
Edition 3.0 (2010-04-29)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD45:2011
Edition 3.0 (2011-06-30)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD46:2011
Edition 3.0 (2011-06-30)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD47:2011
Edition 3.0 (2011-11-28)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD48:2012
Edition 3.0 (2012-09-27)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD49:2013
Edition 3.0 (2013-02-26)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD50:2014
Edition 3.0 (2014-02-19)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD51:2014
Edition 3.0 (2014-12-11)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD52:2015
Edition 3.0 (2015-07-24)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD53:2015
Edition 3.0 (2015-08-21)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD54:2016
Edition 3.0 (2016-05-30)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD55:2016
Edition 3.0 (2016-12-16)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD56:2017
Edition 3.0 (2017-05-16)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

IEC 60061-1:1969/AMD56:2017/COR1:2017
Edition 3.0 (2017-11-14)
Corrigendum 1 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

IEC 60061-1:1969/AMD57:2017
Edition 3.0 (2017-12-15)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

IEC 60061-1:1969/AMD58:2018
Edition 3.0 (2018-08-23)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD58:2018/COR1:2019
Edition 3.0 (2019-03-12)
Corrigendum 1 - Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD59:2019
Edition 3.0 (2019-07-08)
Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD60:2020
Edition 3.0 (2020-03-31)
Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD61:2020
Edition 3.0 (2020-11-27)
Amendment 61 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-2:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD18:1998
Edition 3.0 (1998-03-16)
Amendment 18 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD19:1999
Edition 3.0 (1999-02-23)
Amendment 19 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD20:1999
Edition 3.0 (1999-07-29)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD21:2000
Edition 3.0 (2000-05-26)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD22:2001
Edition 3.0 (2001-02-13)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD23:2001
Edition 3.0 (2001-02-13)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD24:2001
Edition 3.0 (2001-10-26)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD25:2002
Edition 3.0 (2002-05-03)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD26:2002
Edition 3.0 (2002-05-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD27:2002
Edition 3.0 (2002-10-29)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD28:2003
Edition 3.0 (2003-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD29:2003
Edition 3.0 (2003-09-03)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD30:2003
Edition 3.0 (2003-10-30)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders

IEC 60061-2:1969/AMD31:2004
Edition 3.0 (2004-07-26)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD32:2004
Edition 3.0 (2004-11-25)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD33:2005
Edition 3.0 (2005-10-03)
Amendment 33 to IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD34:2006
Edition 3.0 (2006-05-30)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD35:2006
Edition 3.0 (2006-12-14)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD36:2007
Edition 3.0 (2007-04-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD37:2008
Edition 3.0 (2008-07-18)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD38:2009
Edition 3.0 (2009-04-29)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD39:2009
Edition 3.0 (2009-07-24)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD40:2010
Edition 3.0 (2010-02-22)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD41:2010
Edition 3.0 (2010-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD42:2011
Edition 3.0 (2011-06-30)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD44:2011
Edition 3.0 (2011-11-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD45:2012
Edition 3.0 (2012-09-27)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD46:2013
Edition 3.0 (2013-02-26)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD47:2014
Edition 3.0 (2014-02-19)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD48:2014
Edition 3.0 (2014-12-11)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD49:2015
Edition 3.0 (2015-07-24)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD50:2015
Edition 3.0 (2015-08-21)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD51:2016
Edition 3.0 (2016-05-30)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD52:2017
Edition 3.0 (2017-05-16)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders

IEC 60061-2:1969/AMD53:2017
Edition 3.0 (2017-12-15)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD54:2018
Edition 3.0 (2018-08-23)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD55:2020
Edition 3.0 (2020-03-31)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD56:2020
Edition 3.0 (2020-05-13)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD57:2020
Edition 3.0 (2020-11-27)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-3:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD20:1998
Edition 3.0 (1998-03-16)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD21:1999
Edition 3.0 (1999-02-23)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD22:1999
Edition 3.0 (1999-07-29)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD23:2000
Edition 3.0 (2000-05-18)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD24:2001
Edition 3.0 (2001-02-13)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD26:2001
Edition 3.0 (2001-10-26)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD27:2002
Edition 3.0 (2002-05-03)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD28:2002
Edition 3.0 (2002-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD29:2002
Edition 3.0 (2002-10-31)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD30:2003
Edition 3.0 (2003-05-15)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD31:2003
Edition 3.0 (2003-09-03)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges

IEC 60061-3:1969/AMD32:2003
Edition 3.0 (2003-10-30)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD33:2004
Edition 3.0 (2004-07-26)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD34:2004
Edition 3.0 (2004-11-25)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD35:2005
Edition 3.0 (2005-10-03)
Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD36:2006
Edition 3.0 (2006-05-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD37:2006
Edition 3.0 (2006-12-14)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD38:2007
Edition 3.0 (2007-04-30)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD39:2009
Edition 3.0 (2009-04-29)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD40:2009
Edition 3.0 (2009-07-24)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD41:2010
Edition 3.0 (2010-02-22)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD42:2010
Edition 3.0 (2010-04-29)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD44:2011
Edition 3.0 (2011-07-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD45:2011
Edition 3.0 (2011-11-28)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD46:2012
Edition 3.0 (2012-09-27)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD47:2013
Edition 3.0 (2013-02-26)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD48:2014
Edition 3.0 (2014-02-19)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD49:2014
Edition 3.0 (2014-12-11)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD50:2015
Edition 3.0 (2015-07-24)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD51:2015
Edition 3.0 (2015-08-21)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD52:2016
Edition 3.0 (2016-05-30)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD53:2017
Edition 3.0 (2017-05-16)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD54:2017
Edition 3.0 (2017-12-15)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD55:2018
Edition 3.0 (2018-08-23)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD56:2019
Edition 3.0 (2019-07-08)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD57:2020
Edition 3.0 (2020-03-31)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD58:2020
Edition 3.0 (2020-05-13)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-4:2005 CSV
Edition 1.9 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990
Edition 1.0 (1990-02-28)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD5:1998
Edition 1.0 (1998-03-16)
Amendment 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD6:2000
Edition 1.0 (2000-05-18)
Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD7:2001
Edition 1.0 (2001-10-26)
Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD8:2003
Edition 1.0 (2003-05-13)
Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD9:2004
Edition 1.0 (2004-11-25)
Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD10:2006
Edition 1.0 (2006-05-30)
Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD11:2007
Edition 1.0 (2007-10-16)
Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD12:2009
Edition 1.0 (2009-07-24)
Amendment 12 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD13:2010
Edition 1.0 (2010-08-31)
Amendment 13 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD14:2011
Edition 1.0 (2011-08-26)
Amendment 14 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD15:2017
Edition 1.0 (2017-05-16)
Amendment 15 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD16:2018
Edition 1.0 (2018-03-22)
Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-1A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1D:1972
Edition 3.0 (1972-01-01)
supplement 4 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1E:1972
Edition 3.0 (1972-01-01)
Supplement 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1F:1975
Edition 3.0 (1975-01-01)
Supplement 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1H:1977
Edition 3.0 (1977-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1J:1980
Edition 3.0 (1980-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1K:1983
Edition 3.0 (1983-01-01)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1L:1987
Edition 3.0 (1987-01-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1M:1989
Edition 3.0 (1989-01-01)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1N:1992
Edition 3.0 (1992-04-30)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1P:1994
Edition 3.0 (1994-03-01)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1Q:1994
Edition 3.0 (1994-11-23)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1R:1995
Edition 3.0 (1995-11-08)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1S:1996
Edition 3.0 (1996-02-01)
seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1T:1996
Edition 3.0 (1996-07-01)
eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1U:1996
Edition 3.0 (1996-10-01)
nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1V:1997
Edition 3.0 (1997-05-23)
Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-2A:1970
Edition 3.0 (1970-01-01)
first supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2B:1971
Edition 3.0 (1971-01-01)
second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2C:1972
Edition 3.0 (1972-01-01)
third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2D:1975
Edition 3.0 (1975-01-01)
fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2E:1977
Edition 3.0 (1977-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2F:1980
Edition 3.0 (1980-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2G:1983
Edition 3.0 (1983-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2H:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement.

IEC 60061-2J:1989
Edition 3.0 (1989-12-31)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement.

IEC 60061-2K:1992
Edition 3.0 (1992-04-15)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2L:1994
Edition 3.0 (1994-03-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2M:1994
Edition 3.0 (1994-11-23)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2N:1995
Edition 3.0 (1995-11-08)
Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2P:1996
Edition 3.0 (1996-02-01)
Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2Q:1996
Edition 3.0 (1996-07-01)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2R:1996
Edition 3.0 (1996-10-01)
sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2S:1997
Edition 3.0 (1997-05-23)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-3A:1970
Edition 3.0 (1970-01-01)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3B:1971
Edition 3.0 (1971-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3C:1971
Edition 3.0 (1971-01-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3D:1972
Edition 3.0 (1972-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3E:1972
Edition 3.0 (1972-01-01)
Fifth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3F:1975
Edition 3.0 (1975-01-01)
Sixth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3G:1977
Edition 3.0 (1977-01-01)
Seventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3H:1980
Edition 3.0 (1980-01-01)
Eighth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3J:1983
Edition 3.0 (1983-01-01)
Ninth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3K:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement.

IEC 60061-3L:1989
Edition 3.0 (1989-12-15)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement.

IEC 60061-3M:1992
Edition 3.0 (1992-04-30)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3N:1994
Edition 3.0 (1994-03-01)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3P:1994
Edition 3.0 (1994-11-23)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3Q:1995
Edition 3.0 (1995-11-08)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3R:1996
Edition 3.0 (1996-02-01)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3S:1996
Edition 3.0 (1996-07-01)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3T:1996
Edition 3.0 (1996-10-01)
Eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3U:1997
Edition 3.0 (1997-05-23)
Nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-4A:1992
Edition 1.0 (1992-04-30)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4B:1994
Edition 1.0 (1994-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4C:1994
Edition 1.0 (1994-11-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4D:1995
Edition 1.0 (1995-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV
Edition 6.3 (2005-05-24)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993
Edition 6.0 (1993-12-17)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD1:2000
Edition 6.0 (2000-11-28)
Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD2:2002
Edition 6.0 (2002-11-29)
Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD3:2005
Edition 6.0 (2005-03-17)
Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD4:2007
Edition 6.0 (2007-02-16)
Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD5:2009
Edition 6.0 (2009-07-30)
Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60068-2-20:2021
Edition 6.0 (2021-03-30)
Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads

IEC 60068-2-21:2021
Edition 7.0 (2021-07-08)
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

IEC 60068-2-42:2003
Edition 3.0 (2003-05-22)
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-43:2003
Edition 2.0 (2003-05-23)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-46:1982
Edition 1.0 (1982-01-01)
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-49:1983
Edition 1.0 (1983-01-01)
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-58:2015
Edition 4.0 (2015-03-27)
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 60068-2-58:2015/AMD1:2017
Edition 4.0 (2017-07-28)
Amendment 1 - Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 60068-2-69:2017
Edition 3.0 (2017-03-07)
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

IEC 60068-2-69:2017/COR1:2018
Edition 3.0 (2018-01-24)
Corrigendum 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement)

IEC 60068-2-69:2017/AMD1:2019
Edition 3.0 (2019-06-19)
Amendment 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

IEC 60068-2-82:2019
Edition 2.0 (2019-05-14)
Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies

IEC 60068-2-83:2011
Edition 1.0 (2011-09-07)
Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

IEC TR 60068-3-12:2014
Edition 2.0 (2014-10-17)
Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile

IEC 60068-3-13:2016
Edition 1.0 (2016-05-13)
Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering

IEC 60072-2:1990
Edition 1.0 (1990-12-31)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

IEC 60072-3:1994
Edition 1.0 (1994-03-11)
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

IEC 60076-1:2011
Edition 3.0 (2011-04-20)
Power transformers - Part 1: General

IEC 60076-2:2011
Edition 3.0 (2011-02-23)
Power transformers - Part 2: Temperature rise for liquid-immersed transformers

IEC 60076-3:2013
Edition 3.0 (2013-07-31)
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

IEC 60076-3:2013/AMD1:2018
Edition 3.0 (2018-03-22)
Amendment 1 - Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

IEC 60076-4:2002
Edition 1.0 (2002-06-06)
Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

IEC 60076-5:2006
Edition 3.0 (2006-02-07)
Power transformers - Part 5: Ability to withstand short circuit

IEC 60076-6:2007
Edition 1.0 (2007-12-13)
Power transformers - Part 6: Reactors

IEC 60076-7:2018
Edition 2.0 (2018-01-12)
Power transformers - Part 7: Loading guide for mineral-oil-immersed power transformers

IEC 60076-8:1997
Edition 1.0 (1997-10-01)
Power transformers - Part 8: Application guide

IEC 60076-10:2016
Edition 2.0 (2016-03-24)
Power transformers - Part 10: Determination of sound levels

IEC 60076-10-1:2016
Edition 2.0 (2016-03-24)
Power transformers - Part 10-1: Determination of sound levels - Application guide

IEC 60076-10-1:2016/AMD1:2020
Edition 2.0 (2020-11-02)
Amendment 1 - Power transformers - Part 10-1: Determination of sound levels - Application guide

IEC 60076-11:2018
Edition 2.0 (2018-08-15)
Power transformers - Part 11: Dry-type transformers

IEC 60076-11:2018/ISH1:2020
Edition 2.0 (2020-07-10)
Interpretation sheet 1 - Power transformers - Part 11: Dry-type transformers

IEC 60076-11:2018/COR1:2019
Edition 2.0 (2019-03-28)
Corrigendum 1 - Power transformers - Part 11: Dry-type transformers

IEC 60076-12:2008
Edition 1.0 (2008-11-05)
Power transformers - Part 12: Loading guide for dry-type power transformers

IEC 60076-13:2006
Edition 1.0 (2006-05-24)
Power transformers - Part 13: Self-protected liquid-filled transformers

IEC 60076-14:2013
Edition 1.0 (2013-09-16)
Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials

IEC 60076-15:2015
Edition 2.0 (2015-04-22)
Power transformers - Part 15: Gas-filled power transformers

IEC 60076-18:2012
Edition 1.0 (2012-07-09)
Power transformers - Part 18: Measurement of frequency response

IEC TS 60076-20:2017
Edition 1.0 (2017-01-30)
Power transformers - Part 20: Energy efficiency

IEC TS 60076-20:2017/COR1:2018
Edition 1.0 (2018-01-12)
Corrigendum 1 - Power transformers - Part 20: Energy efficiency

IEC 60076-21:2018
Edition 2.0 (2018-12-07)
Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators

IEC 60076-22-1:2019
Edition 1.0 (2019-01-29)
Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices

IEC 60076-22-2:2019
Edition 1.0 (2019-01-16)
Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators

IEC 60076-22-3:2019
Edition 1.0 (2019-03-08)
Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers

IEC 60076-22-4:2019
Edition 1.0 (2019-03-08)
Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers

IEC 60076-22-7:2020
Edition 1.0 (2020-05-07)
Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings

IEC TS 60076-23:2018
Edition 1.0 (2018-01-09)
Power transformers - Part 23: DC magnetic bias suppression devices

IEC 60076-24:2020
Edition 1.0 (2020-07-09)
Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)

IEC TR 60076-26:2020
Edition 1.0 (2020-03-26)
Power transformers - Part 26: Functional requirements of insulating liquids for use in power transformers

IEC/IEEE 60076-57-1202:2017
Edition 1.0 (2017-05-23)
Power transformers - Part 57-1202: Liquid immersed phase-shifting transformers

IEC/IEEE 60076-57-129:2017
Edition 1.0 (2017-11-09)
Power transformers - Part 57-129: Transformers for HVDC applications

IEC 60079-0:2017
Edition 7.0 (2017-12-13)
Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-0:2017/ISH1:2019
Edition 7.0 (2019-04-23)
Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-0:2017/ISH2:2019
Edition 7.0 (2019-06-27)
Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-0:2017/COR1:2020
Edition 7.0 (2020-01-20)
Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-1:2014
Edition 7.0 (2014-06-27)
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

IEC 60079-1:2014/ISH1:2020
Edition 7.0 (2020-05-28)
Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

IEC 60079-1:2014/COR1:2018
Edition 7.0 (2018-06-26)
Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

IEC 60079-2:2014
Edition 6.0 (2014-07-21)
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

IEC 60079-2:2014/COR1:2015
Edition 6.0 (2015-07-07)
Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

IEC 60079-5:2015
Edition 4.0 (2015-02-17)
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

IEC 60079-5:2015/AMD1:2022
Edition 4.0 (2022-05-12)
Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

IEC 60079-6:2015
Edition 4.0 (2015-02-20)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

IEC 60079-6:2015/AMD1:2020
Edition 4.0 (2020-02-24)
Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

IEC 60079-7:2015
Edition 5.0 (2015-06-26)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

IEC 60079-7:2015/ISH1:2016
Edition 5.0 (2016-09-15)
Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

IEC 60079-7:2015/AMD1:2017
Edition 5.0 (2017-08-04)
Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

IEC 60079-10-1:2020
Edition 3.0 (2020-12-18)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

IEC 60079-11:2011
Edition 6.0 (2011-06-30)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH1:2014
Edition 6.0 (2014-10-08)
Interpretation sheet 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH2:2016
Edition 6.0 (2016-07-21)
Interpretation sheet 2 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH3:2016
Edition 6.0 (2016-07-21)
Intrepretation sheet 3 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH4:2019
Edition 6.0 (2019-04-16)
Interpretation Sheet 4 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH5:2019
Edition 6.0 (2019-08-29)
Interpretation Sheet 5 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH6:2019
Edition 6.0 (2019-12-13)
Interpretation sheet 6 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/COR1:2012
Edition 6.0 (2012-01-27)
Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-13:2017
Edition 2.0 (2017-05-22)
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

IEC 60079-15:2017
Edition 5.0 (2017-12-08)
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

IEC TR 60079-16:1990
Edition 1.0 (1990-05-15)
Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses

IEC 60079-18:2014
Edition 4.0 (2014-12-12)
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

IEC 60079-18:2014/COR1:2018
Edition 4.0 (2018-07-25)
Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

IEC 60079-18:2014/AMD1:2017
Edition 4.0 (2017-08-24)
Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

IEC 60079-19:2019
Edition 4.0 (2019-10-18)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

IEC 60079-25:2020
Edition 3.0 (2020-06-26)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems

IEC 60079-25:2020/COR1:2020
Edition 3.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

IEC 60079-28:2015
Edition 2.0 (2015-05-27)
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

IEC 60079-28:2015/ISH1:2019
Edition 2.0 (2019-11-14)
Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

IEC 60079-29-1:2016
Edition 2.0 (2016-07-21)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2016/ISH1:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2016/ISH2:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2016/AMD1:2020
Edition 2.0 (2020-03-24)
Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-2:2015
Edition 2.0 (2015-03-16)
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

IEC 60079-29-3:2014
Edition 1.0 (2014-03-27)
Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

IEC 60079-29-4:2009
Edition 1.0 (2009-11-10)
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

IEC 60079-29-4:2009/COR1:2010
Edition 1.0 (2010-08-10)
Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

IEC/IEEE 60079-30-1:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

IEC/IEEE 60079-30-2:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

IEC TS 60079-32-1:2013
Edition 1.0 (2013-08-20)
Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

IEC TS 60079-32-1:2013/AMD1:2017
Edition 1.0 (2017-03-16)
Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

IEC 60079-32-2:2015
Edition 1.0 (2015-02-25)
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

IEC 60079-33:2012
Edition 1.0 (2012-09-27)
Explosive atmospheres - Part 33: Equipment protection by special protection 's'

IEC 60079-35-1:2011
Edition 1.0 (2011-05-26)
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

IEC 60079-35-2:2011
Edition 1.0 (2011-12-07)
Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

IEC TS 60079-39:2015
Edition 1.0 (2015-06-11)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

IEC TS 60079-39:2015/COR1:2020
Edition 1.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

IEC TS 60079-40:2015
Edition 1.0 (2015-02-05)
Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems

IEC TS 60079-42:2019
Edition 1.0 (2019-04-17)
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

IEC TS 60079-43:2017
Edition 1.0 (2017-11-13)
Explosive atmospheres - Part 43: Equipment in adverse service conditions

IEC TS 60079-46:2017
Edition 1.0 (2017-08-31)
Explosive atmospheres - Part 46: Equipment assemblies

IEC 60081:1997+AMD1:2000 CSV
Edition 5.1 (2002-05-29)
Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997
Edition 5.0 (1997-12-15)
Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD1:2000
Edition 5.0 (2000-01-27)
Amendment 1 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD2:2003
Edition 5.0 (2003-03-04)
Amendment 2 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD3:2005
Edition 5.0 (2005-09-27)
Amendment 3 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD4:2010
Edition 5.0 (2010-02-18)
Amendment 4 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD5:2013
Edition 5.0 (2013-07-19)
Amendment 5 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD6:2017
Edition 5.0 (2017-08-25)
Amendment 6 - Double-capped fluorescent lamps - Performance specifications

IEC TR 60083:2015
Edition 7.0 (2015-10-29)
Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC

IEC 60085:2007
Edition 4.0 (2007-11-07)
Electrical insulation - Thermal evaluation and designation

IEC 60086-1:2021
Edition 13.0 (2021-04-27)
Primary batteries - Part 1: General

IEC 60086-1:2021/COR1:2022
Edition 13.0 (2022-06-17)
Corrigendum 1 - Primary batteries - Part 1: General

IEC 60086-2:2021
Edition 14.0 (2021-04-27)
Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-2:2021/COR1:2022
Edition 14.0 (2022-06-17)
Corrigendum 1 - Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-3:2021
Edition 5.0 (2021-04-27)
Primary batteries - Part 3: Watch batteries

IEC 60086-4:2019
Edition 5.0 (2019-04-25)
Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4:2019/ISH1:2020
Edition 5.0 (2020-05-14)
Interpretation sheet 1 - Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4:2019/COR1:2019
Edition 5.0 (2019-10-10)
Corrigendum 1 - Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4:2019/COR2:2020
Edition 5.0 (2020-04-22)
Corrigendum 2 - Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-5:2021
Edition 5.0 (2021-09-30)
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

IEC 60086-5:2021/COR1:2022
Edition 5.0 (2022-06-03)
Corrigendum 1 - Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

IEC 60086-6:2020
Edition 1.0 (2020-02-07)
Primary batteries - Part 6: Guidance on environmental aspects

IEC 60099-4:2014
Edition 3.0 (2014-06-30)
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

IEC 60099-5:2018
Edition 3.0 (2018-01-19)
Surge arresters - Part 5: Selection and application recommendations

IEC 60099-6:2019
Edition 2.0 (2019-05-22)
Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - System voltage of 52 kV and less

IEC 60099-8:2017
Edition 2.0 (2017-11-14)
Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV

IEC 60099-9:2014
Edition 1.0 (2014-06-26)
Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations

IEC 60105:1958
Edition 1.0 (1958-01-01)
Recommendation for commercial-purity aluminium busbar material

IEC 60110-1:1998
Edition 1.0 (1998-06-10)
Power capacitors for induction heating installations - Part 1: General

IEC TS 60110-2:2000
Edition 1.0 (2000-02-24)
Power capacitors for induction heating installations - Part 2: Ageing test, destruction test and requirements for disconnecting internal fuses

IEC 60114:1959
Edition 1.0 (1959-01-01)
Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type

IEC 60127-1:2006
Edition 2.0 (2006-06-13)
Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

IEC 60127-1:2006/AMD1:2011
Edition 2.0 (2011-04-20)
Amendment 1 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

IEC 60127-1:2006/AMD2:2015
Edition 2.0 (2015-02-18)
Amendment 2 - Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

IEC 60127-2:2014
Edition 3.0 (2014-09-19)
Miniature fuses - Part 2: Cartridge fuse-links

IEC 60127-2:2014/AMD1:2020
Edition 3.0 (2020-09-14)
Amendment 1 - Miniature fuses - Part 2: Cartridge fuse-links

IEC 60127-3:2015
Edition 3.0 (2015-01-20)
Miniature fuses - Part 3: Sub-miniature fuse-links

IEC 60127-3:2015/AMD1:2020
Edition 3.0 (2020-07-22)
Amendment 1 - Miniature fuses - Part 3: Sub-miniature fuse-links

IEC 60127-4:2005
Edition 3.0 (2005-01-27)
Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types

IEC 60127-4:2005/AMD1:2008
Edition 3.0 (2008-05-21)
Amendment 1 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types

IEC 60127-4:2005/AMD2:2012
Edition 3.0 (2012-12-07)
Amendment 2 - Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types

IEC 60127-5:2016
Edition 2.0 (2016-11-04)
Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

IEC 60127-6:2014
Edition 2.0 (2014-09-03)
Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

IEC 60127-7:2015
Edition 2.0 (2015-09-22)
Miniature fuses - Part 7: Miniature fuse-links for special applications

IEC 60127-8:2018
Edition 1.0 (2018-06-26)
Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection

IEC 60127-10:2001
Edition 1.0 (2001-11-22)
Miniature fuses - Part 10: User guide for miniature fuses

IEC 60130-1:1988
Edition 2.0 (1988-11-10)
Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

IEC 60130-5:1966
Edition 1.0 (1966-01-01)
Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

IEC 60130-9:2011
Edition 4.0 (2011-02-23)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

IEC 60130-10:1971
Edition 1.0 (1971-01-01)
Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

IEC 60130-12:1976
Edition 2.0 (1976-01-01)
Connectors for frequencies below 3 MHz - Part 12: Link and test connectors

IEC 60130-17:1998
Edition 1.0 (1998-02-12)
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

IEC 60136:1986
Edition 2.0 (1986-06-30)
Dimensions of brushes and brush-holders for electrical machinery

IEC 60136:1986/AMD1:1995
Edition 2.0 (1995-04-26)
Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery

IEC 60137:2017
Edition 7.0 (2017-06-22)
Insulated bushings for alternating voltages above 1000 V

IEC 60137:2017/COR1:2018
Edition 7.0 (2018-05-07)
Corrigendum 1 - Insulated bushings for alternating voltages above 1 000 V

IEC 60141-1:1993
Edition 3.0 (1993-09-06)
Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV

IEC 60141-1:1993/AMD1:1995
Edition 3.0 (1995-02-07)
Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV

IEC 60141-1:1993/AMD2:1998
Edition 3.0 (1998-08-25)
Amendment 2 - Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV

IEC 60141-2:1963
Edition 1.0 (1963-01-01)
Tests on oil-filled and gas-pressure cables and their accessories - Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV

IEC 60141-2:1963/AMD1:1967
Edition 1.0 (1967-05-01)
Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV

IEC 60141-3:1963
Edition 1.0 (1963-01-01)
Tests on oil-filled and gas-pressure cables and their accessories - Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV

IEC 60141-3:1963/AMD1:1967
Edition 1.0 (1967-01-01)
Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV

IEC 60141-4:1980
Edition 1.0 (1980-01-01)
Tests on oil-filled and gas-pressure cables and their accessories - Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV

IEC 60141-4:1980/AMD1:1990
Edition 1.0 (1990-10-15)
Amendment 1 - Tests on oil-filled and gas-pressure cables and their accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV

IEC 60143-1:2015
Edition 5.0 (2015-06-25)
Series capacitors for power systems - Part 1: General

IEC 60143-1:2015/COR1:2017
Edition 5.0 (2017-04-26)
Corrigendum 1 - Series capacitors for power systems - Part 1: General

IEC 60143-2:2012
Edition 2.0 (2012-12-11)
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

IEC 60143-2:2012/AMD1:2021
Edition 2.0 (2021-09-02)
Amendment 1 - Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

IEC 60143-3:2015
Edition 2.0 (2015-06-09)
Series capacitors for power systems - Part 3: Internal fuses

IEC 60143-4:2010
Edition 1.0 (2010-11-25)
Series capacitors for power systems - Part 4: Thyristor controlled series capacitors

IEC 60146-1-1:2009
Edition 4.0 (2009-06-29)
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

IEC TR 60146-1-2:2019
Edition 5.0 (2019-10-22)
Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines

IEC 60146-2:1999
Edition 2.0 (1999-11-18)
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

IEC 60155:1993
Edition 4.0 (1993-11-30)
Glow-starters for fluorescent lamps

IEC 60155:1993/AMD1:1995
Edition 4.0 (1995-10-17)
Amendment 1 - Glow-starters for fluorescent lamps

IEC 60155:1993/AMD2:2006
Edition 4.0 (2006-11-27)
Amendment 2 - Glow-starters for fluorescent lamps

IEC 60168:1994+AMD1:1997+AMD2:2000 CSV
Edition 4.2 (2001-04-19)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60168:1994
Edition 4.0 (1994-11-16)
Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60168:1994/AMD1:1997
Edition 4.0 (1997-06-24)
Amendment 1 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60168:1994/AMD2:2000
Edition 4.0 (2000-10-18)
Amendment 2 - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60183:2015
Edition 3.0 (2015-01-14)
Guidance for the selection of high-voltage A.C. cable systems

IEC 60188:2001
Edition 3.0 (2001-05-30)
High-pressure mercury vapour lamps - Performance specifications

IEC 60191-1:2018
Edition 3.0 (2018-01-23)
Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices

IEC 60191-2:1966
Edition 1.0 (1966-01-01)
Mechanical standardization of semiconductor devices. Part 2: Dimensions

IEC 60191-2:1966/AMD1:2001
Edition 1.0 (2001-03-15)
Amendment 1 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD2:2001
Edition 1.0 (2001-06-20)
Amendment 2 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD3:2001
Edition 1.0 (2001-08-28)
Amendment 3 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD4:2001
Edition 1.0 (2001-11-27)
Amendment 4 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD5:2002
Edition 1.0 (2002-02-12)
Amendment 5 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

IEC 60191-2:1966/AMD6:2002
Edition 1.0 (2002-05-01)
Amendment 6 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

IEC 60191-2:1966/AMD7:2002
Edition 1.0 (2002-05-10)
Amendment 7 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

IEC 60191-2:1966/AMD8:2003
Edition 1.0 (2003-06-27)
Amendment 8 - Mechanical standardization of semiconductor devices. Part 2: Dimensions

IEC 60191-2:1966/AMD9:2003
Edition 1.0 (2003-11-19)
Amendment 9 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD10:2004
Edition 1.0 (2004-03-29)
Amendment 10 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD11:2004
Edition 1.0 (2004-11-23)
Amendment 11 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD12:2006
Edition 1.0 (2006-03-24)
Amendment 12 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD13:2006
Edition 1.0 (2006-07-17)
Amendment 13 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD14:2006
Edition 1.0 (2006-07-17)
Amendment 14 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD15:2006
Edition 1.0 (2006-07-17)
Amendment 15 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD16:2007
Edition 1.0 (2007-07-25)
Amendment 16 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD17:2008
Edition 1.0 (2008-05-27)
Amendment 17 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD18:2011
Edition 1.0 (2011-11-22)
Amendment 18 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD19:2012
Edition 1.0 (2012-10-02)
Amendment 19 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD20:2018
Edition 1.0 (2018-04-12)
Amendment 20 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2:1966/AMD21:2020
Edition 1.0 (2020-02-13)
Amendment 21 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-3:1999
Edition 2.0 (1999-10-29)
Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits

IEC 60191-4:2013
Edition 3.0 (2013-10-10)
Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages

IEC 60191-4:2013/AMD1:2018
Edition 3.0 (2018-03-27)
Amendment 1 - Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages

IEC 60191-5:1997
Edition 2.0 (1997-04-23)
Mechanical standardization of semiconductor devices - Part 5: Recommendations applying to integrated circuit packages using tape automated bonding (TAB)

IEC 60191-6:2009
Edition 3.0 (2009-11-26)
Mechanical standardization of semiconductor devices - Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages

IEC 60191-6-1:2001
Edition 1.0 (2001-10-30)
Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing lead terminals

IEC 60191-6-2:2001
Edition 1.0 (2001-12-11)
Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor devices packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages

IEC 60191-6-2:2001/COR1:2002
Edition 1.0 (2002-10-18)
Corrigendum 1 - Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages

IEC 60191-6-3:2000
Edition 1.0 (2000-09-29)
Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat packs (QFP)

IEC 60191-6-4:2003
Edition 1.0 (2003-06-11)
Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA)

IEC 60191-6-5:2001
Edition 1.0 (2001-08-27)
Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array (FBGA)

IEC 60191-6-6:2001
Edition 1.0 (2001-03-22)
Mechanical standardization of semiconductor devices - Part 6-6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch land grid array (FLGA)

IEC 60191-6-8:2001
Edition 1.0 (2001-08-27)
Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad flatpack (G-QFP)

IEC 60191-6-10:2003
Edition 1.0 (2003-11-19)
Mechanical standardization of semiconductor devices - Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Dimensions of P-VSON

IEC 60191-6-12:2011
Edition 2.0 (2011-06-08)
Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array (FLGA)

IEC 60191-6-13:2016
Edition 2.0 (2016-09-27)
Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA)

IEC 60191-6-16:2007
Edition 1.0 (2007-04-26)
Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA

IEC 60191-6-17:2011
Edition 1.0 (2011-01-27)
Mechanical standardization of semiconductor devices - Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball grid array and fine-pitch land grid array (P-PFBGA and P-PFLGA)

IEC 60191-6-18:2010
Edition 1.0 (2010-01-07)
Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)

IEC 60191-6-18:2010/COR1:2010
Edition 1.0 (2010-05-31)
Corrigendum 1 - Mechanical stardardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)

IEC 60191-6-18:2010/COR2:2010
Edition 1.0 (2010-07-28)
Corrigendum 2 - Mechanical standardization of semiconductor devices - Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA)

IEC 60191-6-19:2010
Edition 1.0 (2010-02-25)
Mechanical standardization of semiconductor devices - Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage

IEC 60191-6-20:2010
Edition 1.0 (2010-08-30)
Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ)

IEC 60191-6-21:2010
Edition 1.0 (2010-08-30)
Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP)

IEC 60191-6-22:2012
Edition 1.0 (2012-12-11)
Mechanical standardization of semiconductor devices - Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball Grid Array and Silicon Fine-pitch Land Grid Array (S-FBGA and S-FLGA)

IEC 60191-2X:1999
Edition 1.0 (1999-09-30)
Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2X:1999/COR1:2000
Edition 1.0 (2000-01-31)
Corrigendum 1 - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2Y:2000
Edition 1.0 (2000-06-16)
Twenty-third supplement - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60191-2Z:2000
Edition 1.0 (2000-09-29)
Twenty-fourth supplement - Mechanical standardization of semiconductor devices - Part 2: Dimensions

IEC 60192:2001
Edition 3.0 (2001-05-22)
Low-pressure sodium vapour lamps - Performance specifications

IEC 60193:2019
Edition 3.0 (2019-04-25)
Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests

IEC 60197:1965
Edition 1.0 (1965-01-01)
High-voltage connecting wire with flame retarding insulation for use in television receivers

IEC 60212:2010
Edition 3.0 (2010-12-15)
Standard conditions for use prior to and during the testing of solid electrical insulating materials

IEC 60214-1:2014
Edition 2.0 (2014-05-22)
Tap-changers - Part 1: Performance requirements and test methods

IEC/IEEE 60214-2:2019
Edition 2.0 (2019-06-14)
Tap-changers - Part 2: Application guidelines

IEC 60216-1:2013
Edition 6.0 (2013-03-15)
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results

IEC 60216-2:2005
Edition 4.0 (2005-08-11)
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria

IEC 60216-4-1:2006
Edition 4.0 (2006-01-19)
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens

IEC 60216-4-2:2000
Edition 1.0 (2000-07-31)
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C

IEC 60216-4-3:2000
Edition 1.0 (2000-04-28)
Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens

IEC 60216-5:2008
Edition 3.0 (2008-03-11)
Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

IEC 60216-5:2008/COR1:2009
Edition 3.0 (2009-12-18)
Corrigendum 1 - Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material

IEC 60216-6:2006
Edition 2.0 (2006-05-29)
Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method

IEC TS 60216-7-1:2015
Edition 1.0 (2015-03-30)
Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations based on activation energy

IEC TR 60216-7-2:2016
Edition 1.0 (2016-08-25)
Electrical insulating materials - Thermal endurance properties - Part 7-2: Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data

IEC 60216-8:2013
Edition 1.0 (2013-03-15)
Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures

IEC 60227-1:2007
Edition 3.0 (2007-10-10)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60227-3:1993+AMD1:1997 CSV
Edition 2.1 (1997-11-26)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring

IEC 60227-3:1993
Edition 2.0 (1993-02-15)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring

IEC 60227-3:1993/AMD1:1997
Edition 2.0 (1997-07-18)
Amendment 1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring

IEC 60227-4:1992+AMD1:1997 CSV
Edition 2.1 (1997-12-19)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

IEC 60227-4:1992
Edition 2.0 (1992-03-15)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

IEC 60227-4:1992/AMD1:1997
Edition 2.0 (1997-07-03)
Amendment 1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

IEC 60227-5:2011
Edition 3.0 (2011-09-29)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)

IEC 60227-6:2001
Edition 3.0 (2001-06-11)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections

IEC 60227-7:1995+AMD1:2003+AMD2:2011 CSV
Edition 1.2 (2012-01-18)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors

IEC 60227-7:1995+AMD1:2003 CSV
Edition 1.1 (2003-04-28)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors

IEC 60227-7:1995
Edition 1.0 (1995-12-05)
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors

IEC 60227-7:1995/AMD1:2003
Edition 1.0 (2003-03-26)
Amendment 1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors

IEC 60227-7:1995/AMD2:2011
Edition 1.0 (2011-09-23)
Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors

IEC 60228:2004
Edition 3.0 (2004-11-02)
Conductors of insulated cables

IEC 60229:2007
Edition 3.0 (2007-10-10)
Electric cables - Tests on extruded oversheaths with a special protective function

IEC 60230:2018
Edition 2.0 (2018-01-10)
Impulse tests on cables and their accessories

IEC 60230:2018/AMD1:2021
Edition 2.0 (2021-12-16)
Amendment 1 - Impulse tests on cables and their accessories

IEC 60231:1967
Edition 1.0 (1967-01-01)
General principles of nuclear reactor instrumentation

IEC 60238:2016
Edition 9.0 (2016-07-14)
Edison screw lampholders

IEC 60238:2016/AMD1:2017
Edition 9.0 (2017-01-30)
Amendment 1 - Edison screw lampholders

IEC 60238:2016/AMD1:2017/COR1:2018
Edition 9.0 (2018-01-30)
Corrigendum 1 - Amendment 1 - Edison screw lampholders

IEC 60238:2016/AMD2:2020
Edition 9.0 (2020-01-20)
Amendment 2 - Edison screw lampholders

IEC 60240-1:1992
Edition 2.0 (1992-07-31)
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

IEC 60243-1:2013
Edition 3.0 (2013-03-26)
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies

IEC 60243-2:2013
Edition 3.0 (2013-11-26)
Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage

IEC 60243-3:2013
Edition 3.0 (2013-11-26)
Electric strength of insulating materials - Test methods - Part 3: Additional requirements for 1,2/50 µs impulse tests

IEC 60245-1:2003+AMD1:2007 CSV
Edition 4.1 (2008-01-30)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60245-1:2003
Edition 4.0 (2003-12-19)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60245-1:2003/AMD1:2007
Edition 4.0 (2007-10-10)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60245-3:1994
Edition 2.0 (1994-07-07)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

IEC 60245-3:1994/AMD1:1997
Edition 2.0 (1997-06-10)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

IEC 60245-3:1994/AMD2:2011
Edition 2.0 (2011-09-23)
Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

IEC 60245-4:2011
Edition 3.0 (2011-09-29)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables

IEC 60245-6:1994
Edition 2.0 (1994-07-07)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

IEC 60245-6:1994/AMD1:1997
Edition 2.0 (1997-06-10)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

IEC 60245-6:1994/AMD2:2003
Edition 2.0 (2003-12-19)
Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

IEC 60245-7:1994
Edition 1.0 (1994-07-07)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables

IEC 60245-7:1994/AMD1:1997
Edition 1.0 (1997-05-30)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables

IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV
Edition 1.2 (2012-01-18)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility

IEC 60245-8:1998+AMD1:2003 CSV
Edition 1.1 (2004-01-29)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility

IEC 60245-8:1998
Edition 1.0 (1998-01-30)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility

IEC 60245-8:1998/AMD1:2003
Edition 1.0 (2003-12-17)
Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility

IEC 60245-8:1998/AMD2:2011
Edition 1.0 (2011-09-23)
Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility

IEC 60246:1967
Edition 1.0 (1967-01-01)
Connecting wires having a rated voltage of 20 kV and 25 kV d.c. anda maximum working temperature of 105 °C for use in televisionreceivers

IEC 60252-1:2010
Edition 2.0 (2010-09-29)
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

IEC 60252-1:2010/AMD1:2013
Edition 2.0 (2013-08-29)
Amendment 1 - AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation

IEC 60252-2:2010
Edition 2.0 (2010-12-15)
AC motor capacitors - Part 2: Motor start capacitors

IEC 60252-2:2010/AMD1:2013
Edition 2.0 (2013-08-29)
Amendment 1 - AC motor capacitors - Part 2: Motor start capacitors

IEC 60255-1:2009
Edition 1.0 (2009-08-18)
Measuring relays and protection equipment - Part 1: Common requirements

IEC 60255-12:1980
Edition 1.0 (1980-01-01)
Electrical relays - Part 12: Directional relays and power relays with two input energizing quantities

IEC 60255-13:1980
Edition 1.0 (1980-01-01)
Electrical relays - Part 13: Biased (percentage) differential relays

IEC 60255-24:2013
Edition 2.0 (2013-04-30)
Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems

IEC/IEEE 60255-118-1:2018
Edition 1.0 (2018-12-17)
Measuring relays and protection equipment - Part 118-1: Synchrophasor for power systems - Measurements

IEC 60255-121:2014
Edition 1.0 (2014-03-07)
Measuring relays and protection equipment - Part 121: Functional requirements for distance protection

IEC 60255-127:2010
Edition 1.0 (2010-04-27)
Measuring relays and protection equipment - Part 127: Functional requirements for over/under voltage protection

IEC 60255-149:2013
Edition 1.0 (2013-07-30)
Measuring relays and protection equipment - Part 149: Functional requirements for thermal electrical relays

IEC 60255-151:2009
Edition 1.0 (2009-08-28)
Measuring relays and protection equipment - Part 151: Functional requirements for over/under current protection

IEC 60255-181:2019
Edition 1.0 (2019-02-27)
Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection

IEC 60270:2000
Edition 3.0 (2000-12-21)
High-voltage test techniques - Partial discharge measurements

IEC 60270:2000/COR1:2001
Edition 3.0 (2001-10-24)
Corrigendum 1 - High-voltage test techniques - Partial discharge measurements

IEC 60270:2000/AMD1:2015
Edition 3.0 (2015-11-27)
Amendment 1 - High-voltage test techniques - Partial discharge measurements

IEC 60276:2018
Edition 2.0 (2018-05-08)
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

IEC 60282-1:2020
Edition 8.0 (2020-04-14)
High-voltage fuses - Part 1: Current-limiting fuses

IEC 60282-2:2008
Edition 3.0 (2008-04-29)
High-voltage fuses - Part 2: Expulsion fuses

IEC 60282-4:2020
Edition 1.0 (2020-04-16)
High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators

IEC 60287-1-1:2006
Edition 2.0 (2006-12-13)
Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General

IEC 60287-1-1:2006/AMD1:2014
Edition 2.0 (2014-11-13)
Amendment 1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General

IEC 60287-1-2:1993
Edition 1.0 (1993-12-09)
Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation

IEC 60287-1-3:2002
Edition 1.0 (2002-05-21)
Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses

IEC 60287-2-1:2015
Edition 2.0 (2015-04-09)
Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of the thermal resistance

IEC 60287-2-2:1995
Edition 1.0 (1995-05-11)
Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation

IEC 60287-2-3:2017
Edition 1.0 (2017-04-11)
Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels

IEC 60287-3-1:2017
Edition 2.0 (2017-06-08)
Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions

IEC 60287-3-2:2012
Edition 2.0 (2012-07-04)
Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size

IEC 60287-3-3:2007
Edition 1.0 (2007-05-15)
Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources

IEC 60299:2014
Edition 3.0 (2014-07-10)
Household electric blankets - Methods for measuring performance

IEC 60308:2005
Edition 2.0 (2005-01-28)
Hydraulic turbines - Testing of control systems

IEC 60309-1:2021
Edition 5.0 (2021-06-18)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements

IEC 60309-2:2021
Edition 5.0 (2021-06-18)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories

IEC 60309-4:2021
Edition 2.0 (2021-06-18)
Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock

IEC 60309-5:2017
Edition 1.0 (2017-01-24)
Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)

IEC 60320-1:2021
Edition 4.0 (2021-07-27)
Appliance couplers for household and similar general purposes - Part 1: General requirements

IEC 60320-2-1:2018
Edition 3.0 (2018-02-27)
Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers

IEC 60320-2-3:2018
Edition 2.0 (2018-06-29)
Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0

IEC 60320-2-4:2018
Edition 2.0 (2018-06-29)
Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement

IEC 60320-3:2014
Edition 1.0 (2014-10-24)
Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

IEC 60320-3:2014/AMD1:2018
Edition 1.0 (2018-10-12)
Amendment 1 - Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges

IEC 60331-1:2018
Edition 2.0 (2018-03-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

IEC 60331-2:2018
Edition 2.0 (2018-03-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

IEC 60331-3:2018
Edition 2.0 (2018-03-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

IEC 60331-11:1999+AMD1:2009 CSV
Edition 1.1 (2009-07-08)
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

IEC 60331-11:1999
Edition 1.0 (1999-04-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

IEC 60331-11:1999/AMD1:2009
Edition 1.0 (2009-05-19)
Amendment 1 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

IEC 60331-21:1999
Edition 1.0 (1999-04-28)
Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV

IEC 60331-23:1999
Edition 1.0 (1999-04-23)
Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables

IEC 60331-25:1999
Edition 1.0 (1999-04-23)
Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables

IEC 60332-1-1:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

IEC 60332-1-1:2004/AMD1:2015
Edition 1.0 (2015-07-28)
Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

IEC 60332-1-2:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

IEC 60332-1-2:2004/AMD1:2015
Edition 1.0 (2015-07-28)
Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

IEC 60332-1-3:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

IEC 60332-1-3:2004/AMD1:2015
Edition 1.0 (2015-07-28)
Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

IEC 60332-2-1:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

IEC 60332-2-2:2004
Edition 1.0 (2004-07-15)
Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

IEC 60332-3-10:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

IEC 60332-3-10:2018/COR1:2018
Edition 2.0 (2018-10-11)
Corrigendum 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus

IEC 60332-3-21:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R

IEC 60332-3-22:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A

IEC 60332-3-23:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B

IEC 60332-3-24:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C

IEC 60332-3-24:2018/ISH1:2019
Edition 2.0 (2019-01-18)
Interpretation sheet 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C

IEC 60332-3-25:2018
Edition 2.0 (2018-07-13)
Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D

IEC 60335-1:2020
Edition 6.0 (2020-09-02)
Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-1:2020/ISH1:2021
Edition 6.0 (2021-11-22)
Interpretation Sheet 1 - Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-1:2020/COR1:2021
Edition 6.0 (2021-12-07)
Corrigendum 1 - Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-2-29:2016
Edition 5.0 (2016-06-09)
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

IEC 60335-2-29:2016/AMD1:2019
Edition 5.0 (2019-03-29)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

IEC 60343:1991
Edition 2.0 (1991-01-23)
Recommended test methods for determining the relative resistance of insulating materials to breakdown by surface discharges

IEC 60352-1:1997
Edition 3.0 (1997-08-06)
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

IEC 60352-1:1997/COR1:1998
Edition 3.0 (1998-10-07)
Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

IEC 60352-2:2006
Edition 2.0 (2006-02-23)
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

IEC 60352-2:2006/AMD1:2013
Edition 2.0 (2013-06-27)
Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

IEC 60352-3:2020
Edition 2.0 (2020-04-09)
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

IEC 60352-4:2020
Edition 2.0 (2020-06-11)
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

IEC 60352-5:2020
Edition 5.0 (2020-07-22)
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

IEC 60352-6:1997
Edition 1.0 (1997-08-26)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

IEC 60352-8:2011
Edition 1.0 (2011-02-10)
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

IEC 60356:1971
Edition 1.0 (1971-01-01)
Dimensions for commutators and slip-rings

IEC 60357:2002
Edition 3.0 (2002-11-15)
Tungsten halogen lamps (non vehicle) - Performance specifications

IEC 60357:2002/AMD1:2006
Edition 3.0 (2006-04-11)
Amendment 1 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60357:2002/AMD2:2008
Edition 3.0 (2008-10-08)
Amendment 2 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60357:2002/AMD3:2011
Edition 3.0 (2011-01-27)
Amendment 3 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60358-1:2012
Edition 1.0 (2012-06-12)
Coupling capacitors and capacitor dividers - Part 1: General rules

IEC 60358-1:2012/COR1:2013
Edition 1.0 (2013-07-16)
Corrigendum 1 - Coupling capacitors and capacitor dividers - Part 1: General rules

IEC 60358-2:2013
Edition 1.0 (2013-08-12)
Coupling capacitors and capacitor dividers - Part 2: AC or DC single-phase coupling capacitor connected between line and ground for power line carrier-frequency (PLC) application

IEC 60358-3:2013
Edition 1.0 (2013-11-27)
Coupling capacitors and capacitor dividers - Part 3: AC or DC coupling capacitor for harmonic-filters applications

IEC 60358-4:2018
Edition 1.0 (2018-07-03)
Coupling capacitors and capacitor dividers - Part 4: DC and AC single-phase capacitor dividers

IEC 60360:1998
Edition 3.0 (1998-06-10)
Standard method of measurement of lamp cap temperature rise

IEC 60360:1998/COR1:1999
Edition 3.0 (1999-03-16)
Corrigendum 1 - Standard method of measurement of lamp cap temperature rise

IEC 60364-1:2005
Edition 5.0 (2005-11-29)
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

IEC 60364-1:2005/COR1:2009
Edition 5.0 (2009-08-28)
Corrigendum 1 - Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

IEC 60364-4-41:2005
Edition 5.0 (2005-12-15)
Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-4-41:2005/AMD1:2017
Edition 5.0 (2017-03-17)
Amendment 1 - Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-4-42:2010
Edition 3.0 (2010-05-19)
Low-voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects

IEC 60364-4-42:2010/AMD1:2014
Edition 3.0 (2014-11-13)
Amendment 1 - Low-voltage electrical installation - Part 4-42: Protection for safety - Protection against thermal effects

IEC 60364-4-43:2008
Edition 3.0 (2008-08-13)
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent

IEC 60364-4-43:2008/COR1:2008
Edition 3.0 (2008-10-13)
Corrigendum 1 - Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent

IEC 60364-4-44:2007
Edition 2.0 (2007-08-14)
Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-4-44:2007/COR1:2010
Edition 2.0 (2010-05-26)
Corrigendum 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-4-44:2007/COR2:2011
Edition 2.0 (2011-10-13)
Corrigendum 2 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-4-44:2007/AMD1:2015
Edition 2.0 (2015-09-23)
Amendment 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-4-44:2007/AMD1:2015/COR1:2016
Edition 2.0 (2016-08-30)
Corrigendum 1 - Amendment 1 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-4-44:2007/AMD2:2018
Edition 2.0 (2018-01-16)
Amendment 2 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

IEC 60364-5-51:2005
Edition 5.0 (2005-04-14)
Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

IEC 60364-5-52:2009
Edition 3.0 (2009-10-20)
Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

IEC 60364-5-52:2009/COR1:2011
Edition 3.0 (2011-02-10)
Corrigendum 1 - Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

IEC 60364-5-53:2019
Edition 4.0 (2019-02-21)
Low-voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring

IEC 60364-5-53:2019/AMD1:2020
Edition 4.0 (2020-12-10)
Amendment 1 - Low-Voltage electrical installations - Part 5-53: Selection and erection of electrical equipment - Devices for protection for safety, isolation, switching, control and monitoring

IEC 60364-5-54:2011
Edition 3.0 (2011-03-23)
Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

IEC 60364-5-54:2011/AMD1:2021
Edition 3.0 (2021-04-13)
Amendment 1 - Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

IEC 60364-5-55:2011
Edition 2.0 (2011-12-14)
Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

IEC 60364-5-55:2011/AMD1:2012
Edition 2.0 (2012-10-12)
Amendment 1 - Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

IEC 60364-5-55:2011/AMD2:2016
Edition 2.0 (2016-07-28)
Amendment 2 - Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment

IEC 60364-5-56:2018
Edition 3.0 (2018-11-02)
Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services

IEC 60364-6:2016
Edition 2.0 (2016-04-27)
Low voltage electrical installations - Part 6: Verification

IEC 60364-6:2016/COR1:2017
Edition 2.0 (2017-09-20)
Corrigendum 1 - Low voltage electrical installations - Part 6: Verification

IEC 60364-7-701:2019
Edition 3.0 (2019-10-14)
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

IEC 60364-7-702:2010
Edition 3.0 (2010-05-12)
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains

IEC 60364-7-703:2004
Edition 2.0 (2004-10-26)
Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters

IEC 60364-7-705:2006
Edition 2.0 (2006-07-10)
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

IEC 60364-7-706:2005
Edition 2.0 (2005-10-19)
Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement

IEC 60364-7-706:2005/AMD1:2019
Edition 2.0 (2019-09-26)
Amendment 1 - Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement

IEC 60364-7-712:2017
Edition 2.0 (2017-04-10)
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

IEC 60364-7-729:2007
Edition 1.0 (2007-07-16)
Low-voltage electrical installations - Part 7-729: Requirements for special installations or locations - Operating or maintenance gangways

IEC 60370:2017
Edition 2.0 (2017-12-13)
Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods

IEC 60371-1:2003
Edition 3.0 (2003-04-09)
Specification for insulating materials based on mica - Part 1: Definitions and general requirements

IEC 60371-2:2004
Edition 3.0 (2004-06-23)
Specification for insulating materials based on mica - Part 2: Methods of test

IEC 60371-3-1:2006
Edition 3.0 (2006-06-13)
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials

IEC 60371-3-2:2005
Edition 2.0 (2005-10-24)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper

IEC 60371-3-3:1983
Edition 1.0 (1983-01-01)
Specification for insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment

IEC 60371-3-4:1992
Edition 1.0 (1992-11-20)
Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-4:1992/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-5:2005
Edition 2.0 (2005-11-21)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)

IEC 60371-3-6:1992
Edition 1.0 (1992-11-30)
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-6:1992/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-7:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

IEC 60371-3-7:1995/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

IEC 60371-3-8:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables

IEC 60371-3-8:1995/AMD1:2007
Edition 1.0 (2007-04-11)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables

IEC 60371-3-9:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

IEC 60371-3-9:1995/AMD1:2007
Edition 1.0 (2007-04-11)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

IEC 60377-1:1973
Edition 1.0 (1973-01-01)
Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1: General

IEC 60377-2:1977
Edition 1.0 (1977-01-01)
Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 2: Resonance methods

IEC 60379:1987
Edition 3.0 (1987-09-30)
Methods for measuring the performance of electric storage water-heaters for household purposes

IEC 60383-1:1993
Edition 4.0 (1993-04-26)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

IEC 60383-2:1993
Edition 1.0 (1993-04-20)
Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

IEC 60384-14:2013
Edition 4.0 (2013-06-05)
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-14:2013/COR1:2016
Edition 4.0 (2016-04-13)
Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-14:2013/AMD1:2016
Edition 4.0 (2016-07-14)
Amendment 1 - Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-14-1:2016
Edition 3.0 (2016-01-19)
Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ

IEC 60384-14-2:2016
Edition 2.0 (2016-04-07)
Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only

IEC 60394-1:1972
Edition 1.0 (1972-01-01)
Varnished fabrics for electrical purposes. Part 1: Definitions and general requirements

IEC 60394-2:1972
Edition 1.0 (1972-01-01)
Varnished fabrics for electrical purposes. Part 2: Methods of test

IEC 60394-3-1:1976
Edition 1.0 (1976-01-01)
Varnished fabrics for electrical purposes. Part 3-1: Specifications for individual materials. Oleoresinous varnish-cotton base, OR/C

IEC 60394-3-2:1988
Edition 1.0 (1988-03-30)
Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Glass-fabric based varnished fabrics with epoxy, polyuréthane, silicone, polyester, bituminous or oleoresinous varnish

IEC 60399:2004+AMD1:2008 CSV
Edition 2.1 (2008-10-21)
Barrel thread for lampholders with shade holder ring

IEC 60399:2004
Edition 2.0 (2004-10-07)
Barrel thread for lampholders with shade holder ring

IEC 60399:2004/AMD1:2008
Edition 2.0 (2008-07-08)
Amendment 1 - Barrel thread for lampholders with shade holder ring

IEC 60400:2017
Edition 8.0 (2017-06-15)
Lampholders for tubular fluorescent lamps and starterholders

IEC 60400:2017/AMD1:2020
Edition 8.0 (2020-02-25)
Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders

IEC 60400:2017/AMD2:2022
Edition 8.0 (2022-02-01)
Amendment 2 - Lampholders for tubular fluorescent lamps and starterholders

IEC 60412:2014
Edition 3.0 (2014-09-24)
Nuclear instrumentation - Nomenclature (identification) of scintillators and scintillation detectors and standard dimensions of scintillators

IEC 60413:1972
Edition 1.0 (1972-01-01)
Test procedures for determining physical properties of brush materials for electrical machines

IEC 60423:2007
Edition 3.0 (2007-08-23)
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings

IEC 60426:2007
Edition 2.0 (2007-01-29)
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods

IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV
Edition 2.2 (2012-02-10)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999
Edition 2.0 (1999-08-13)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999/AMD2:2011
Edition 2.0 (2011-12-07)
Amendment 2 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV
Edition 2.2 (2012-05-15)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999
Edition 2.0 (1999-10-13)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999/AMD2:2012
Edition 2.0 (2012-03-22)
Amendment 2 - Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-3:2012
Edition 2.0 (2012-07-04)
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

IEC 60434:1973
Edition 1.0 (1973-01-01)
Aircraft electrical filament lamps

IEC 60434:1973/AMD1:1981
Edition 1.0 (1981-08-01)
Amendment 1 - Aircraft electrical filament lamps

IEC 60434:1973/AMD2:1984
Edition 1.0 (1984-01-01)
Amendment 2 - Aircraft electrical filament lamps

IEC 60436:2015
Edition 4.0 (2015-10-29)
Electric dishwashers for household use - Methods for measuring the performance

IEC 60436:2015/COR1:2020
Edition 4.0 (2020-09-29)
Corrigendum 1 - Electric dishwashers for household use - Methods for measuring the performance

IEC 60436:2015/AMD1:2020
Edition 4.0 (2020-05-29)
Amendment 1 - Electric dishwashers for household use - Methods for measuring the performance

IEC 60450:2004+AMD1:2007 CSV
Edition 2.1 (2007-07-25)
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

IEC 60450:2004
Edition 2.0 (2004-04-19)
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

IEC 60450:2004/AMD1:2007
Edition 2.0 (2007-05-30)
Amendment 1 - Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

IEC 60454-1:1992
Edition 2.0 (1992-05-31)
Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements

IEC 60454-2:2007
Edition 3.0 (2007-06-21)
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test

IEC 60454-2:2007/COR1:2009
Edition 3.0 (2009-12-17)
Corrigendum 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test

IEC 60454-3-1:1998+AMD1:2001 CSV
Edition 2.1 (2002-12-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

IEC 60454-3-1:1998
Edition 2.0 (1998-02-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

IEC 60454-3-1:1998/AMD1:2001
Edition 2.0 (2001-05-28)
Amendment 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

IEC 60454-3-2:2006
Edition 3.0 (2006-01-23)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives

IEC 60454-3-4:2007
Edition 3.0 (2007-06-05)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive

IEC 60454-3-7:1998
Edition 2.0 (1998-03-16)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive

IEC 60454-3-8:2006
Edition 3.0 (2006-02-13)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre

IEC 60454-3-11:2007
Edition 2.0 (2007-05-10)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive

IEC 60454-3-12:2006
Edition 2.0 (2006-01-23)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive

IEC 60454-3-14:2001
Edition 1.0 (2001-07-10)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive

IEC 60454-3-19:2003
Edition 1.0 (2003-05-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides

IEC 60455-1:1998
Edition 2.0 (1998-08-25)
Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements

IEC 60455-2:2015
Edition 3.0 (2015-06-25)
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test

IEC 60455-2-2:1984
Edition 1.0 (1984-01-01)
Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 2-2: Methods of test - Test methods for coating powders for electrical purposes

IEC 60455-3-1:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds

IEC 60455-3-2:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds

IEC 60455-3-3:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds

IEC 60455-3-4:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds

IEC 60455-3-5:2006
Edition 3.0 (2006-03-08)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins

IEC 60455-3-8:2021
Edition 2.0 (2021-06-16)
Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories

IEC 60455-3-11:1988
Edition 1.0 (1988-04-15)
Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resin-based coating powders

IEC 60462:2010
Edition 2.0 (2010-07-12)
Nuclear instrumentation - Photomultiplier tubes for scintillation counting - Test procedures

IEC 60464-1:1998
Edition 2.0 (1998-11-16)
Varnishes used for electrical insulation - Part 1: Definitions and general requirements

IEC 60464-1:1998/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements

IEC 60464-2:2001
Edition 2.0 (2001-07-31)
Varnishes used for electrical insulation - Part 2: Methods of test

IEC 60464-2:2001/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test

IEC 60464-3-1:2001
Edition 2.0 (2001-07-10)
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

IEC 60464-3-1:2001/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

IEC 60464-3-2:2001
Edition 2.0 (2001-07-10)
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

IEC 60464-3-2:2001/AMD1:2006
Edition 2.0 (2006-04-27)
Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

IEC 60468:1974
Edition 1.0 (1974-01-01)
Method of measurement of resistivity of metallic materials

IEC 60493-1:2011
Edition 2.0 (2011-12-14)
Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results

IEC TR 60493-2:2010
Edition 1.0 (2010-03-30)
Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data

IEC TR 60493-3:2017
Edition 1.0 (2017-05-11)
Guidelines for the statistical analysis of ageing test data - Part 3: Minimum specimen numbers at different test conditions with given experimental data

IEC 60498:1975
Edition 1.0 (1975-01-01)
High-voltage coaxial connectors used in nuclear instrumentation

IEC 60502-2:2014
Edition 3.0 (2014-02-20)
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60502-4:2010
Edition 3.0 (2010-12-15)
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60505:2011
Edition 4.0 (2011-07-11)
Evaluation and qualification of electrical insulation systems

IEC 60505:2011/COR1:2017
Edition 4.0 (2017-03-14)
Corrigendum 1 - Evaluation and qualification of electrical insulation systems

IEC 60507:2013
Edition 3.0 (2013-12-13)
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

IEC 60507:2013/COR1:2018
Edition 3.0 (2018-08-29)
Corrigendum 1 - Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems

IEC 60512-1:2018
Edition 5.0 (2018-10-22)
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification

IEC 60512-1-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

IEC 60512-1-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

IEC 60512-1-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

IEC 60512-1-4:1997
Edition 1.0 (1997-07-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

IEC 60512-1-4:1997/COR1:2000
Edition 1.0 (2000-11-15)
Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

IEC 60512-1-100:2012
Edition 3.0 (2012-02-22)
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

IEC 60512-1-101:2015
Edition 1.0 (2015-05-05)
Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification

IEC 60512-2-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

IEC 60512-2-2:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

IEC 60512-2-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

IEC 60512-2-5:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

IEC 60512-2-6:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

IEC 60512-3-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

IEC 60512-4-1:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

IEC 60512-4-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

IEC 60512-4-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

IEC 60512-5-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

IEC 60512-5-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

IEC 60512-6-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

IEC 60512-6-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

IEC 60512-6-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

IEC 60512-6-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

IEC 60512-6-5:1997
Edition 1.0 (1997-10-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

IEC 60512-7-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

IEC 60512-7-2:2011
Edition 1.0 (2011-11-17)
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

IEC 60512-8-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

IEC 60512-8-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

IEC 60512-8-3:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

IEC 60512-9-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

IEC 60512-9-2:2011
Edition 1.0 (2011-11-28)
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

IEC 60512-9-3:2011
Edition 2.0 (2011-06-22)
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

IEC 60512-9-4:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

IEC 60512-9-5:2020
Edition 2.0 (2020-06-09)
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

IEC 60512-10-4:2003
Edition 2.0 (2003-08-11)
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

IEC 60512-11-1:2019
Edition 2.0 (2019-05-16)
Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

IEC 60512-11-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

IEC 60512-11-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

IEC 60512-11-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

IEC 60512-11-5:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

IEC 60512-11-6:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

IEC 60512-11-7:2003
Edition 2.0 (2003-05-22)
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

IEC 60512-11-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

IEC 60512-11-9:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

IEC 60512-11-10:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

IEC 60512-11-11:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

IEC 60512-11-12:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

IEC 60512-11-13:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

IEC 60512-11-14:2003
Edition 2.0 (2003-07-24)
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

IEC 60512-12-1:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

IEC 60512-12-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

IEC 60512-12-3:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

IEC 60512-12-4:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

IEC 60512-12-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

IEC 60512-12-6:1996
Edition 1.0 (1996-01-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

IEC 60512-12-7:2001
Edition 1.0 (2001-01-24)
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

IEC 60512-13-1:2006
Edition 2.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

IEC 60512-13-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

IEC 60512-13-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

IEC 60512-14-2:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

IEC 60512-14-4:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

IEC 60512-14-5:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

IEC 60512-14-6:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

IEC 60512-14-7:1997
Edition 1.0 (1997-10-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

IEC 60512-15-1:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

IEC 60512-15-2:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

IEC 60512-15-3:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

IEC 60512-15-4:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

IEC 60512-15-5:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

IEC 60512-15-6:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

IEC 60512-15-7:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

IEC 60512-15-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

IEC 60512-16-1:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

IEC 60512-16-2:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

IEC 60512-16-3:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

IEC 60512-16-4:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

IEC 60512-16-5:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

IEC 60512-16-6:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

IEC 60512-16-7:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

IEC 60512-16-8:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

IEC 60512-16-9:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

IEC 60512-16-11:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

IEC 60512-16-13:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

IEC 60512-16-14:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

IEC 60512-16-16:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

IEC 60512-16-17:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

IEC 60512-16-18:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

IEC 60512-16-20:1996
Edition 1.0 (1996-07-31)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

IEC 60512-16-21:2012
Edition 1.0 (2012-05-07)
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

IEC 60512-17-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

IEC 60512-17-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

IEC 60512-17-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

IEC 60512-17-4:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

IEC 60512-19-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

IEC 60512-19-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

IEC 60512-20-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

IEC 60512-20-2:2000
Edition 1.0 (2000-04-13)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

IEC 60512-20-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

IEC 60512-21-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance

IEC 60512-22-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

IEC 60512-23-2:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

IEC 60512-23-3:2018
Edition 2.0 (2018-12-14)
Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

IEC 60512-23-4:2001
Edition 1.0 (2001-06-19)
Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

IEC 60512-23-7:2005
Edition 1.0 (2005-01-27)
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

IEC 60512-24-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

IEC 60512-25-1:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

IEC 60512-25-2:2002
Edition 1.0 (2002-03-12)
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

IEC 60512-25-3:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation

IEC 60512-25-4:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

IEC 60512-25-5:2004
Edition 1.0 (2004-07-15)
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

IEC 60512-25-6:2004
Edition 1.0 (2004-05-26)
Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

IEC 60512-25-7:2004
Edition 1.0 (2004-12-15)
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

IEC 60512-25-9:2008
Edition 1.0 (2008-08-28)
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

IEC 60512-26-100:2008+AMD1:2011 CSV
Edition 1.1 (2011-05-25)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-26-100:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-26-100:2008/AMD1:2011
Edition 1.0 (2011-03-14)
Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-27-100:2011
Edition 1.0 (2011-12-07)
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g

IEC PAS 60512-27-200:2018
Edition 1.0 (2018-10-19)
Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

IEC 60512-28-100:2019
Edition 2.0 (2019-11-15)
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

IEC 60512-29-100:2015
Edition 1.0 (2015-03-05)
Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

IEC 60512-99-001:2012
Edition 1.0 (2012-08-13)
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

IEC 60512-99-002:2022
Edition 2.0 (2022-01-28)
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load

IEC 60515:2007
Edition 2.0 (2007-02-23)
Nuclear power plants - Instrumentation important to safety - Radiation detectors - Characteristics and test methods

IEC 60519-1:2020
Edition 6.0 (2020-03-11)
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

IEC 60519-3:2005
Edition 3.0 (2005-02-17)
Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations

IEC 60519-4:2021
Edition 5.0 (2021-12-15)
Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

IEC 60519-6:2022
Edition 4.0 (2022-01-20)
Safety in installations for electroheating and electromagnetic processing - Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment

IEC 60519-10:2013
Edition 2.0 (2013-02-22)
Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications

IEC 60519-11:2007
Edition 2.0 (2007-06-22)
Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

IEC 60531:1999
Edition 2.0 (1999-01-07)
Household electric thermal storage room heaters - Methods for measuring performance

IEC 60544-1:2013
Edition 3.0 (2013-06-27)
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry

IEC 60544-2:2012
Edition 3.0 (2012-07-09)
Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test

IEC 60544-4:2003
Edition 2.0 (2003-07-11)
Electrical insulating materials - Determination of the effects of ionizing radiation - Part 4: Classification system for service in radiation environments

IEC 60545:2021
Edition 2.0 (2021-06-23)
Guidelines for commissioning and operation of hydraulic turbines, pump-turbines and storage pumps

IEC 60549:2013
Edition 2.0 (2013-04-23)
High-voltage fuses for the external protection of shunt capacitors

IEC 60554-1:1977
Edition 1.0 (1977-01-01)
Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

IEC 60554-1:1977/AMD1:1983
Edition 1.0 (1983-01-01)
Amendment 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

IEC 60554-2:2001
Edition 2.0 (2001-11-08)
Cellulosic papers for electrical purposes - Part 2: Methods of test

IEC 60554-3-1:1979
Edition 1.0 (1979-01-01)
Specification for cellulosic papers for electrical purposes. Part 3-1: Specifications for individual materials. General purpose electrical paper

IEC 60554-3-2:1983
Edition 1.0 (1983-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper

IEC 60554-3-3:1980
Edition 1.0 (1980-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper

IEC 60554-3-4:1979
Edition 1.0 (1979-01-01)
Specification for cellulosic papers for electrical purposes. Part 3-4: Specifications for individual materials. Electrolytic capacitor paper

IEC 60554-3-5:1984
Edition 1.0 (1984-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers

IEC 60560:1977
Edition 1.0 (1977-01-01)
Definitions and terminology of brush-holders for electrical machines

IEC 60568:2006
Edition 2.0 (2006-01-23)
Nuclear power plants - Instrumentation important to safety - In-core instrumentation for neutron fluence rate (flux) measurements in power reactors

IEC 60570:2003
Edition 4.0 (2003-01-30)
Electrical supply track systems for luminaires

IEC 60570:2003/AMD1:2017
Edition 4.0 (2017-04-05)
Amendment 1 - Electrical supply track systems for luminaires

IEC 60570:2003/AMD2:2019
Edition 4.0 (2019-12-11)
Amendment 2 - Electrical supply track systems for luminaires

IEC TR 60575:1977
Edition 1.0 (1977-01-01)
Thermal-mechanical performance test and mechanical performance test on string insulator units

IEC 60589:1977
Edition 1.0 (1977-01-01)
Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids

IEC 60598-1:2020
Edition 9.0 (2020-08-17)
Luminaires - Part 1: General requirements and tests

IEC 60598-2-1:2020
Edition 2.0 (2020-01-28)
Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires

IEC 60598-2-2:2011
Edition 3.0 (2011-11-08)
Luminaires - Part 2-2: Particular requirements - Recessed luminaires

IEC 60598-2-3:2002+AMD1:2011 CSV
Edition 3.1 (2011-11-17)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-3:2002
Edition 3.0 (2002-12-04)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-3:2002/AMD1:2011
Edition 3.0 (2011-04-14)
Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-4:2017
Edition 3.0 (2017-04-21)
Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires

IEC 60598-2-5:2015
Edition 3.0 (2015-08-06)
Luminaires - Part 2-5: Particular requirements - Floodlights

IEC 60598-2-8:2013
Edition 3.0 (2013-04-29)
Luminaires - Part 2-8: Particular requirements - Handlamps

IEC 60598-2-10:2003
Edition 2.0 (2003-05-19)
Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

IEC 60598-2-11:2013
Edition 2.0 (2013-05-16)
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

IEC 60598-2-12:2013
Edition 2.0 (2013-04-29)
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

IEC 60598-2-13:2006+AMD1:2011 CSV
Edition 1.1 (2012-02-10)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-13:2006
Edition 1.0 (2006-06-13)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-13:2006/AMD1:2011
Edition 1.0 (2011-12-07)
Amendment 1 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-13:2006/AMD2:2016
Edition 1.0 (2016-05-25)
Amendment 2 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-14:2009
Edition 1.0 (2009-02-05)
Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

IEC 60598-2-17:2017
Edition 2.0 (2017-05-30)
Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)

IEC 60598-2-18:1993
Edition 2.0 (1993-04-26)
Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

IEC 60598-2-18:1993/COR1:2013
Edition 2.0 (2013-03-21)
Corrigendum 1 - Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

IEC 60598-2-18:1993/AMD1:2011
Edition 2.0 (2011-12-14)
Amendment 1 - Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications

IEC 60598-2-19:1981
Edition 1.0 (1981-01-01)
Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-19:1981/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-19:1981/AMD2:1997
Edition 1.0 (1997-12-11)
Amendment 2 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-20:2022
Edition 5.0 (2022-01-31)
Luminaires - Part 2-20: Particular requirements - Lighting chains

IEC 60598-2-21:2014
Edition 1.0 (2014-11-25)
Luminaires - Part 2-21: Particular requirements - Rope lights

IEC 60598-2-21:2014/COR1:2016
Edition 1.0 (2016-12-16)
Corrigendum 1 - Luminaires - Part 2-21: Particular requirements - Rope lights

IEC 60598-2-23:2020
Edition 2.0 (2020-07-20)
Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources

IEC 60598-2-24:2013
Edition 2.0 (2013-06-19)
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

IEC 60598-2-25:1994
Edition 1.0 (1994-08-17)
Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

IEC 60598-2-25:1994/AMD1:2004
Edition 1.0 (2004-09-28)
Amendment 1 - Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings

IEC 60600:1979
Edition 1.0 (1979-01-01)
Equipment for minehead assay and sorting radioactive ores in containers

IEC 60603-1:1991
Edition 2.0 (1991-06-28)
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

IEC 60603-1:1991/AMD1:1992
Edition 2.0 (1992-06-15)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

IEC 60603-2:1995
Edition 3.0 (1995-09-22)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

IEC 60603-2:1995/AMD1:2000
Edition 3.0 (2000-08-18)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

IEC 60603-3:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing

IEC 60603-4:1987
Edition 1.0 (1987-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

IEC 60603-5:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing

IEC 60603-6:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness

IEC 60603-7-1:2011
Edition 3.0 (2011-04-07)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

IEC 60603-7-2:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz