SDG 5 - Gender equality

Achieve gender equality and empower all women and girls

SDG 5

More opportunities

IEC Standards and Conformity Assessment (CA) Systems contribute to enhancing the health and status of women in society. In some emerging countries, enabling access to electricity and lighting can significantly improve the standards of living for all, and especially women. Enabling access to online education and medical services, ensuring the safety of household appliances, are only a few of the areas to which IEC Standards and CA systems contribute.

25 IEC TC/SCs, 1 IEC SyC and 4 IEC CA Systems contribute to SDG 5.

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

Diversity statement

Philippe Metzger - IGC International Gender Champion

Marianna Kramarikova is the focal point of IEC at the IGC.

Women in standards

Marianna Kramarikova, IEC Technical Officer - Director at WIS

Women at IEC

IEC work addresses topics related to gender equality

Electricity access

Education

Radio

Software

Electricity generation

Computer hardware and displays

Television

Safety

Lighting

Mobile phones

E-readers

Clean water

Audio

Data storage systems

IEC work directly impacts the following SDG targets

5.2 Eliminate all forms of violence against women and girls in public and private spheres

Gender based violence often happens after dark: women need the security and protection afforded by lighting.

IEC TC 34 and 4 SCs: Lamps and related equipment;
IEC TC 100/TA 16: Active assisted living (AAL), wearable electronic devices and technologies, accessibility and user interfaces;
IEC SyC AAL: Active assisted living

5.5 Ensure women’s full and effective participation and equal opportunities

Energy poverty costs time and money: girls and women spend 2 to 8 hours daily gathering fuel for lighting and cooking, and a high percentage of household income is spent on low-quality energy, such as kerosene. IEC work enables access to sustainable electricity, lighting, and clean water nearby. This allows women to spend more time contributing to local economies and societies.

IEC TC 27: Industrial electroheating and electromagnetic processing [safety aspects];
IEC TC 34 and 4 SCs: Lamps and related equipment;
IEC SC 48B: Electrical connectors;
IEC TC 59: Performance of household and similar electrical appliances;
IEC TC 61: Safety of household and similar electrical appliances;
IEC SC 62A: Common aspects of electrical equipment used in medical practice;
IEC SC 62B: Diagnostic imaging equipment;
IEC SC 62D: Electromedical equipment;
IEC TC 64: Electrical installations and protection against electric shock;
IEC TC 66: Safety of measuring, control and laboratory equipment;
IEC TC 76: Optical radiation safety and laser equipment;
IEC TC 87: Ultrasonics;
IEC TC 100/TA 16: Active assisted living (AAL), wearable electronic devices and technologies, accessibility and user interfaces;
IEC TC 106: Methods for the assessment of electric, magnetic and electromagnetic fields associated with human exposure;
IEC SyC AAL: Active assisted living;
IECEE: IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components;
IECQ: IEC Quality Assessment System for Electronic Components

5.B Enhance the use of enabling technology, in particular information and communication technology, to promote the empowerment of women

IEC International Standards underpin all types of communication technology including computer hardware, internet access, data storage systems and software.

IEC TC 86 and 3 SCs: Fibre optics;
IEC TC 100/TA 16: Active assisted living (AAL), wearable electronic devices and technologies, accessibility and user interfaces;
IEC TC 100/TA 20: Analogue and digital audio;
IEC TC 108: Safety of electronic equipment within the field of audio/video, information technology and communication technology;
IEC SyC AAL: Active assisted living;
ISO/IEC JTC 1: Information technology.

More information about SDG 5

Anchor placeholder #data

Publications
Projects

Reference	Language	TC/SC
IEC 60034-2-1:2014 Edition 2.0 (2014-06-27) Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)
IEC 60034-2-2:2010 Edition 1.0 (2010-03-16) Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1
IEC 60034-2-3:2020 Edition 1.0 (2020-03-19) Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
IEC 60034-3:2020 Edition 7.0 (2020-05-26) Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
IEC 60034-4-1:2018 Edition 1.0 (2018-04-27) Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests
IEC 60034-5:2020 Edition 5.0 (2020-04-29) Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
IEC 60034-6:1991 Edition 2.0 (1991-10-01) Rotating electrical machines - Part 6: Methods of cooling (IC Code)
IEC 60034-8:2007 Edition 3.0 (2007-06-22) Rotating electrical machines - Part 8: Terminal markings and direction of rotation
IEC 60034-8:2007/AMD1:2014 Edition 3.0 (2014-03-20) Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation
IEC 60034-12:2016 Edition 3.0 (2016-11-23) Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034-14:2018 Edition 4.0 (2018-08-17) Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
IEC 60034-15:2009 Edition 3.0 (2009-03-17) Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
IEC 60034-16-1:2011 Edition 2.0 (2011-05-25) Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions
IEC TR 60034-16-2:1991 Edition 1.0 (1991-02-15) Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies
IEC TS 60034-16-3:1996 Edition 1.0 (1996-02-14) Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance
IEC 60034-18-1:2010 Edition 2.0 (2010-03-10) Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines
IEC 60034-18-21:2012 Edition 2.0 (2012-09-19) Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification
IEC 60034-18-31:2012 Edition 2.0 (2012-06-25) Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines
IEC TS 60034-18-33:2010 Edition 2.0 (2010-07-22) Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses
IEC 60034-18-34:2012 Edition 1.0 (2012-06-14) Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems
IEC 60034-18-41:2014 Edition 1.0 (2014-03-06) Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests
IEC 60034-18-41:2014/AMD1:2019 Edition 1.0 (2019-06-25) Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests
IEC 60034-18-41:2014/AMD1:2019/COR1:2020 Edition 1.0 (2020-12-11) Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests
IEC 60034-18-42:2017 Edition 1.0 (2017-02-07) Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
IEC 60034-18-42:2017/AMD1:2020 Edition 1.0 (2020-08-18) Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
IEC 60034-19:2014 Edition 2.0 (2014-09-25) Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies
IEC TS 60034-20-1:2002 Edition 1.0 (2002-01-18) Rotating electrical machines - Part 20-1: Control motors - Stepping motors
IEC 60034-22:2009 Edition 2.0 (2009-10-28) Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
IEC 60034-23:2019 Edition 1.0 (2019-01-24) Rotating electrical machines - Part 23: Repair, overhaul and reclamation
IEC TS 60034-24:2009 Edition 1.0 (2009-09-16) Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide
IEC 60034-26:2006 Edition 1.0 (2006-07-24) Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
IEC 60034-26:2006/COR1:2014 Edition 1.0 (2014-09-03) Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
IEC 60034-27-1:2017 Edition 1.0 (2017-12-13) Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation
IEC TS 60034-27-2:2012 Edition 1.0 (2012-03-22) Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines
IEC 60034-27-3:2015 Edition 1.0 (2015-12-16) Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines
IEC 60034-27-4:2018 Edition 1.0 (2018-01-24) Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
IEC 60034-28:2012 Edition 2.0 (2012-12-13) Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors
IEC 60034-29:2008 Edition 1.0 (2008-03-11) Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise
IEC 60034-30-1:2014 Edition 1.0 (2014-03-06) Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)
IEC TS 60034-30-2:2016 Edition 1.0 (2016-12-08) Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)
IEC TS 60034-32:2016 Edition 1.0 (2016-12-15) Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
IEC 60061-1:2005 CSV Edition 3.4 (2005-01-27) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969 Edition 3.0 (1969-01-01) Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD21:1998 Edition 3.0 (1998-03-16) Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD22:1999 Edition 3.0 (1999-02-23) Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD23:1999 Edition 3.0 (1999-07-29) Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD24:2000 Edition 3.0 (2000-05-18) Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD25:2001 Edition 3.0 (2001-02-13) Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD26:2001 Edition 3.0 (2001-02-13) Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD27:2001 Edition 3.0 (2001-10-26) Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD28:2002 Edition 3.0 (2002-05-03) Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD29:2002 Edition 3.0 (2002-05-13) Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1:1969/AMD30:2002 Edition 3.0 (2002-10-29) Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD31:2003 Edition 3.0 (2003-05-15) Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD32:2003 Edition 3.0 (2003-09-03) Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD33:2003 Edition 3.0 (2003-10-30) Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD34:2004 Edition 3.0 (2004-07-26) Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD35:2004 Edition 3.0 (2004-11-25) Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD36:2005 Edition 3.0 (2005-10-03) Amendment 36 to IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD37:2006 Edition 3.0 (2006-05-30) Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD38:2006 Edition 3.0 (2006-12-14) Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD39:2007 Edition 3.0 (2007-04-30) Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD40:2008 Edition 3.0 (2008-07-18) Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD41:2009 Edition 3.0 (2009-04-29) Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD42:2009 Edition 3.0 (2009-07-24) Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD43:2010 Edition 3.0 (2010-02-22) Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD44:2010 Edition 3.0 (2010-04-29) Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD45:2011 Edition 3.0 (2011-06-30) Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD46:2011 Edition 3.0 (2011-06-30) Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD47:2011 Edition 3.0 (2011-11-28) Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD48:2012 Edition 3.0 (2012-09-27) Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD49:2013 Edition 3.0 (2013-02-26) Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD50:2014 Edition 3.0 (2014-02-19) Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD51:2014 Edition 3.0 (2014-12-11) Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD52:2015 Edition 3.0 (2015-07-24) Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD53:2015 Edition 3.0 (2015-08-21) Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD54:2016 Edition 3.0 (2016-05-30) Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD55:2016 Edition 3.0 (2016-12-16) Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-1:1969/AMD56:2017 Edition 3.0 (2017-05-16) Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps
IEC 60061-1:1969/AMD56:2017/COR1:2017 Edition 3.0 (2017-11-14) Corrigendum 1 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps
IEC 60061-1:1969/AMD57:2017 Edition 3.0 (2017-12-15) Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps
IEC 60061-1:1969/AMD58:2018 Edition 3.0 (2018-08-23) Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps
IEC 60061-1:1969/AMD58:2018/COR1:2019 Edition 3.0 (2019-03-12) Corrigendum 1 - Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps
IEC 60061-1:1969/AMD59:2019 Edition 3.0 (2019-07-08) Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps
IEC 60061-1:1969/AMD60:2020 Edition 3.0 (2020-03-31) Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps
IEC 60061-1:1969/AMD61:2020 Edition 3.0 (2020-11-27) Amendment 61 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
IEC 60061-2:2005 CSV Edition 3.3 (2005-01-27) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969 Edition 3.0 (1969-01-01) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD18:1998 Edition 3.0 (1998-03-16) Amendment 18 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD19:1999 Edition 3.0 (1999-02-23) Amendment 19 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD20:1999 Edition 3.0 (1999-07-29) Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD21:2000 Edition 3.0 (2000-05-26) Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD22:2001 Edition 3.0 (2001-02-13) Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD23:2001 Edition 3.0 (2001-02-13) Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD24:2001 Edition 3.0 (2001-10-26) Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD25:2002 Edition 3.0 (2002-05-03) Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD26:2002 Edition 3.0 (2002-05-13) Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2:1969/AMD27:2002 Edition 3.0 (2002-10-29) Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD28:2003 Edition 3.0 (2003-05-13) Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD29:2003 Edition 3.0 (2003-09-03) Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD30:2003 Edition 3.0 (2003-10-30) Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders
IEC 60061-2:1969/AMD31:2004 Edition 3.0 (2004-07-26) Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD32:2004 Edition 3.0 (2004-11-25) Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD33:2005 Edition 3.0 (2005-10-03) Amendment 33 to IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD34:2006 Edition 3.0 (2006-05-30) Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD35:2006 Edition 3.0 (2006-12-14) Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD36:2007 Edition 3.0 (2007-04-30) Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD37:2008 Edition 3.0 (2008-07-18) Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD38:2009 Edition 3.0 (2009-04-29) Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD39:2009 Edition 3.0 (2009-07-24) Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD40:2010 Edition 3.0 (2010-02-22) Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD41:2010 Edition 3.0 (2010-04-29) Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD42:2011 Edition 3.0 (2011-06-30) Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD43:2011 Edition 3.0 (2011-06-30) Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD44:2011 Edition 3.0 (2011-11-28) Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD45:2012 Edition 3.0 (2012-09-27) Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD46:2013 Edition 3.0 (2013-02-26) Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD47:2014 Edition 3.0 (2014-02-19) Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD48:2014 Edition 3.0 (2014-12-11) Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD49:2015 Edition 3.0 (2015-07-24) Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD50:2015 Edition 3.0 (2015-08-21) Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD51:2016 Edition 3.0 (2016-05-30) Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD52:2017 Edition 3.0 (2017-05-16) Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders
IEC 60061-2:1969/AMD53:2017 Edition 3.0 (2017-12-15) Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD54:2018 Edition 3.0 (2018-08-23) Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD55:2020 Edition 3.0 (2020-03-31) Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD56:2020 Edition 3.0 (2020-05-13) Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-2:1969/AMD57:2020 Edition 3.0 (2020-11-27) Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
IEC 60061-3:2005 CSV Edition 3.3 (2005-01-27) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969 Edition 3.0 (1969-01-01) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD20:1998 Edition 3.0 (1998-03-16) Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD21:1999 Edition 3.0 (1999-02-23) Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD22:1999 Edition 3.0 (1999-07-29) Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD23:2000 Edition 3.0 (2000-05-18) Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD24:2001 Edition 3.0 (2001-02-13) Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD25:2001 Edition 3.0 (2001-02-13) Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD26:2001 Edition 3.0 (2001-10-26) Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD27:2002 Edition 3.0 (2002-05-03) Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD28:2002 Edition 3.0 (2002-05-13) Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3:1969/AMD29:2002 Edition 3.0 (2002-10-31) Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD30:2003 Edition 3.0 (2003-05-15) Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD31:2003 Edition 3.0 (2003-09-03) Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges
IEC 60061-3:1969/AMD32:2003 Edition 3.0 (2003-10-30) Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD33:2004 Edition 3.0 (2004-07-26) Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD34:2004 Edition 3.0 (2004-11-25) Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD35:2005 Edition 3.0 (2005-10-03) Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD36:2006 Edition 3.0 (2006-05-30) Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD37:2006 Edition 3.0 (2006-12-14) Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD38:2007 Edition 3.0 (2007-04-30) Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD39:2009 Edition 3.0 (2009-04-29) Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD40:2009 Edition 3.0 (2009-07-24) Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD41:2010 Edition 3.0 (2010-02-22) Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD42:2010 Edition 3.0 (2010-04-29) Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD43:2011 Edition 3.0 (2011-06-30) Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD44:2011 Edition 3.0 (2011-07-28) Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD45:2011 Edition 3.0 (2011-11-28) Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD46:2012 Edition 3.0 (2012-09-27) Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD47:2013 Edition 3.0 (2013-02-26) Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD48:2014 Edition 3.0 (2014-02-19) Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD49:2014 Edition 3.0 (2014-12-11) Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD50:2015 Edition 3.0 (2015-07-24) Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD51:2015 Edition 3.0 (2015-08-21) Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD52:2016 Edition 3.0 (2016-05-30) Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD53:2017 Edition 3.0 (2017-05-16) Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD54:2017 Edition 3.0 (2017-12-15) Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD55:2018 Edition 3.0 (2018-08-23) Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD56:2019 Edition 3.0 (2019-07-08) Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD57:2020 Edition 3.0 (2020-03-31) Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-3:1969/AMD58:2020 Edition 3.0 (2020-05-13) Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60061-4:2005 CSV Edition 1.9 (2005-01-27) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990 Edition 1.0 (1990-02-28) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4:1990/AMD5:1998 Edition 1.0 (1998-03-16) Amendment 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4:1990/AMD6:2000 Edition 1.0 (2000-05-18) Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4:1990/AMD7:2001 Edition 1.0 (2001-10-26) Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4:1990/AMD8:2003 Edition 1.0 (2003-05-13) Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4:1990/AMD9:2004 Edition 1.0 (2004-11-25) Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD10:2006 Edition 1.0 (2006-05-30) Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD11:2007 Edition 1.0 (2007-10-16) Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD12:2009 Edition 1.0 (2009-07-24) Amendment 12 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD13:2010 Edition 1.0 (2010-08-31) Amendment 13 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD14:2011 Edition 1.0 (2011-08-26) Amendment 14 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD15:2017 Edition 1.0 (2017-05-16) Amendment 15 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-4:1990/AMD16:2018 Edition 1.0 (2018-03-22) Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
IEC 60061-1L:1987 Edition 3.0 (1987-01-01) Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1M:1989 Edition 3.0 (1989-01-01) Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1N:1992 Edition 3.0 (1992-04-30) Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1P:1994 Edition 3.0 (1994-03-01) Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1Q:1994 Edition 3.0 (1994-11-23) Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1R:1995 Edition 3.0 (1995-11-08) Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1S:1996 Edition 3.0 (1996-02-01) seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1T:1996 Edition 3.0 (1996-07-01) eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1U:1996 Edition 3.0 (1996-10-01) nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-1V:1997 Edition 3.0 (1997-05-23) Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
IEC 60061-2H:1987 Edition 3.0 (1987-06-30) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement.
IEC 60061-2J:1989 Edition 3.0 (1989-12-31) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement.
IEC 60061-2K:1992 Edition 3.0 (1992-04-15) Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2L:1994 Edition 3.0 (1994-03-01) Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2M:1994 Edition 3.0 (1994-11-23) Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2N:1995 Edition 3.0 (1995-11-08) Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2P:1996 Edition 3.0 (1996-02-01) Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2Q:1996 Edition 3.0 (1996-07-01) Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2R:1996 Edition 3.0 (1996-10-01) sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-2S:1997 Edition 3.0 (1997-05-23) Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
IEC 60061-3K:1987 Edition 3.0 (1987-06-30) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement.
IEC 60061-3L:1989 Edition 3.0 (1989-12-15) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement.
IEC 60061-3M:1992 Edition 3.0 (1992-04-30) Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3N:1994 Edition 3.0 (1994-03-01) Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3P:1994 Edition 3.0 (1994-11-23) Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3Q:1995 Edition 3.0 (1995-11-08) Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3R:1996 Edition 3.0 (1996-02-01) Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3S:1996 Edition 3.0 (1996-07-01) Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3T:1996 Edition 3.0 (1996-10-01) Eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-3U:1997 Edition 3.0 (1997-05-23) Nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
IEC 60061-4A:1992 Edition 1.0 (1992-04-30) First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4B:1994 Edition 1.0 (1994-01-01) Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4C:1994 Edition 1.0 (1994-11-01) Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60061-4D:1995 Edition 1.0 (1995-01-01) Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information
IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV Edition 6.3 (2005-05-24) Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60064:1993 Edition 6.0 (1993-12-17) Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60064:1993/AMD1:2000 Edition 6.0 (2000-11-28) Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60064:1993/AMD2:2002 Edition 6.0 (2002-11-29) Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60064:1993/AMD3:2005 Edition 6.0 (2005-03-17) Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60064:1993/AMD4:2007 Edition 6.0 (2007-02-16) Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60064:1993/AMD5:2009 Edition 6.0 (2009-07-30) Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60072-2:1990 Edition 1.0 (1990-12-31) Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
IEC 60072-3:1994 Edition 1.0 (1994-03-11) Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50
IEC 60081:1997+AMD1:2000 CSV Edition 5.1 (2002-05-29) Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997 Edition 5.0 (1997-12-15) Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997/AMD1:2000 Edition 5.0 (2000-01-27) Amendment 1 - Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997/AMD2:2003 Edition 5.0 (2003-03-04) Amendment 2 - Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997/AMD3:2005 Edition 5.0 (2005-09-27) Amendment 3 - Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997/AMD4:2010 Edition 5.0 (2010-02-18) Amendment 4 - Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997/AMD5:2013 Edition 5.0 (2013-07-19) Amendment 5 - Double-capped fluorescent lamps - Performance specifications
IEC 60081:1997/AMD6:2017 Edition 5.0 (2017-08-25) Amendment 6 - Double-capped fluorescent lamps - Performance specifications
IEC 60136:1986 Edition 2.0 (1986-06-30) Dimensions of brushes and brush-holders for electrical machinery
IEC 60136:1986/AMD1:1995 Edition 2.0 (1995-04-26) Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery
IEC 60155:1993 Edition 4.0 (1993-11-30) Glow-starters for fluorescent lamps
IEC 60155:1993/AMD1:1995 Edition 4.0 (1995-10-17) Amendment 1 - Glow-starters for fluorescent lamps
IEC 60155:1993/AMD2:2006 Edition 4.0 (2006-11-27) Amendment 2 - Glow-starters for fluorescent lamps
IEC 60188:2001 Edition 3.0 (2001-05-30) High-pressure mercury vapour lamps - Performance specifications
IEC 60192:2001 Edition 3.0 (2001-05-22) Low-pressure sodium vapour lamps - Performance specifications
IEC 60238:2016 Edition 9.0 (2016-07-14) Edison screw lampholders
IEC 60238:2016/AMD1:2017 Edition 9.0 (2017-01-30) Amendment 1 - Edison screw lampholders
IEC 60238:2016/AMD1:2017/COR1:2018 Edition 9.0 (2018-01-30) Corrigendum 1 - Amendment 1 - Edison screw lampholders
IEC 60238:2016/AMD2:2020 Edition 9.0 (2020-01-20) Amendment 2 - Edison screw lampholders
IEC 60240-1:1992 Edition 2.0 (1992-07-31) Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters
IEC 60276:2018 Edition 2.0 (2018-05-08) Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature
IEC 60335-1:2020 Edition 6.0 (2020-09-02) Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-1:2020/ISH1:2021 Edition 6.0 (2021-11-22) Interpretation Sheet 1 - Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-1:2020/COR1:2021 Edition 6.0 (2021-12-07) Corrigendum 1 - Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-2-2:2019 Edition 7.0 (2019-05-14) Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-3:2012 Edition 6.0 (2012-03-15) Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
IEC 60335-2-3:2012/AMD1:2015 Edition 6.0 (2015-07-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
IEC 60335-2-4:2021 Edition 7.0 (2021-03-10) Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors
IEC 60335-2-5:2012 Edition 6.0 (2012-11-06) Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
IEC 60335-2-5:2012/ISH1:2019 Edition 6.0 (2019-09-24) Interpretation Sheet 1 - Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
IEC 60335-2-5:2012/AMD1:2018 Edition 6.0 (2018-02-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
IEC 60335-2-5:2012/AMD1:2018/COR1:2018 Edition 6.0 (2018-08-29) Corrigendum 1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
IEC 60335-2-6:2014 Edition 6.0 (2014-02-25) Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-6:2014/AMD1:2018 Edition 6.0 (2018-05-28) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-7:2019 Edition 8.0 (2019-05-14) Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
IEC 60335-2-8:2012 Edition 6.0 (2012-12-13) Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-8:2012/AMD1:2015 Edition 6.0 (2015-11-23) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-8:2012/AMD2:2018 Edition 6.0 (2018-11-23) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-9:2019 Edition 7.0 (2019-05-17) Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances
IEC 60335-2-10:2021 Edition 6.0 (2021-12-14) Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
IEC 60335-2-11:2019 Edition 8.0 (2019-04-15) Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
IEC 60335-2-12:2002+AMD1:2008 CSV Edition 5.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
IEC 60335-2-12:2002 Edition 5.0 (2002-10-29) Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
IEC 60335-2-12:2002/AMD1:2008 Edition 5.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
IEC 60335-2-12:2002/AMD2:2017 Edition 5.0 (2017-10-17) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances
IEC 60335-2-13:2021 Edition 7.0 (2021-12-14) Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
IEC 60335-2-14:2016 Edition 6.0 (2016-06-24) Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
IEC 60335-2-14:2016/AMD1:2019 Edition 6.0 (2019-03-27) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines
IEC 60335-2-15:2012 Edition 6.0 (2012-11-06) Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-15:2012/AMD1:2016 Edition 6.0 (2016-04-08) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-15:2012/AMD2:2018 Edition 6.0 (2018-11-02) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids
IEC 60335-2-16:2002+AMD1:2008+AMD2:2011 CSV Edition 5.2 (2012-01-30) Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-16:2002+AMD1:2008 CSV Edition 5.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-16:2002 Edition 5.0 (2002-12-13) Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-16:2002/AMD1:2008 Edition 5.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-16:2002/AMD2:2011 Edition 5.0 (2011-09-13) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers
IEC 60335-2-17:2012 Edition 3.0 (2012-03-26) Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-17:2012/AMD1:2015 Edition 3.0 (2015-07-23) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-17:2012/AMD2:2019 Edition 3.0 (2019-03-22) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances
IEC 60335-2-21:2012 Edition 6.0 (2012-11-06) Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
IEC 60335-2-21:2012/COR1:2013 Edition 6.0 (2013-04-26) Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
IEC 60335-2-21:2012/AMD1:2018 Edition 6.0 (2018-08-17) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
IEC 60335-2-23:2016 Edition 6.0 (2016-06-09) Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
IEC 60335-2-23:2016/AMD1:2019 Edition 6.0 (2019-03-27) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care
IEC 60335-2-26:2002+AMD1:2008 CSV Edition 4.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
IEC 60335-2-26:2002 Edition 4.0 (2002-10-23) Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
IEC 60335-2-26:2002/AMD1:2008 Edition 4.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
IEC 60335-2-27:2019 Edition 6.0 (2019-05-17) Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation
IEC 60335-2-28:2021 Edition 5.0 (2021-11-17) Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
IEC 60335-2-29:2016 Edition 5.0 (2016-06-09) Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
IEC 60335-2-29:2016/AMD1:2019 Edition 5.0 (2019-03-29) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
IEC 60335-2-30:2009 Edition 5.0 (2009-11-26) Household and similar electrical appliances - Safety -Part 2-30: Particular requirements for room heaters
IEC 60335-2-30:2009/COR1:2014 Edition 5.0 (2014-11-18) Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
IEC 60335-2-30:2009/AMD1:2016 Edition 5.0 (2016-11-16) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
IEC 60335-2-30:2009/AMD2:2021 Edition 5.0 (2021-03-08) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
IEC 60335-2-31:2012 Edition 5.0 (2012-11-07) Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-31:2012/AMD1:2016 Edition 5.0 (2016-04-12) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-31:2012/AMD2:2018 Edition 5.0 (2018-08-17) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-32:2019 Edition 5.0 (2019-09-20) Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
IEC 60335-2-35:2012 Edition 5.0 (2012-11-07) Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-35:2012/AMD1:2016 Edition 5.0 (2016-11-08) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-35:2012/AMD2:2020 Edition 5.0 (2020-06-04) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters
IEC 60335-2-43:2017 Edition 4.0 (2017-10-11) Household and similar electrical appliances - Safety - Part 2-43: Particular clothes dryers and towel rails
IEC 60335-2-44:2021 Edition 4.0 (2021-11-03) Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV Edition 3.2 (2012-01-30) Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45:2002+AMD1:2008 CSV Edition 3.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45:2002 Edition 3.0 (2002-10-31) Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45:2002/AMD1:2008 Edition 3.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45:2002/AMD2:2011 Edition 3.0 (2011-08-30) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-53:2011 Edition 4.0 (2011-04-20) Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
IEC 60335-2-53:2011/AMD1:2017 Edition 4.0 (2017-01-30) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
IEC 60335-2-53:2011/AMD1:2017/COR1:2017 Edition 4.0 (2017-03-28) Corrigendum 1 - Amendment 1 - Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
IEC 60335-2-53:2011/AMD2:2021 Edition 4.0 (2021-03-09) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins
IEC 60335-2-54:2008 Edition 4.0 (2008-09-26) Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
IEC 60335-2-54:2008/AMD1:2015 Edition 4.0 (2015-08-05) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
IEC 60335-2-54:2008/AMD2:2019 Edition 4.0 (2019-03-22) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam
IEC 60335-2-55:2021 Edition 4.0 (2021-11-05) Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds
IEC 60335-2-58:2017 Edition 4.0 (2017-12-08) Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
IEC 60335-2-59:2021 Edition 4.0 (2021-12-14) Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
IEC 60335-2-60:2017 Edition 4.0 (2017-12-08) Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
IEC 60335-2-61:2002+AMD1:2005+AMD2:2008 CSV Edition 2.2 (2009-04-29) Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-61:2002+AMD1:2005 CSV Edition 2.1 (2005-06-20) Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-61:2002 Edition 2.0 (2002-10-09) Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-61:2002/AMD1:2005 Edition 2.0 (2005-04-20) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-61:2002/AMD2:2008 Edition 2.0 (2008-07-23) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters
IEC 60335-2-65:2002+AMD1:2008 CSV Edition 2.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002 Edition 2.0 (2002-10-09) Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002/COR1:2004 Edition 2.0 (2004-07-26) Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002/AMD1:2008 Edition 2.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-65:2002/AMD2:2015 Edition 2.0 (2015-01-22) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
IEC 60335-2-66:2002+AMD1:2008+AMD2:2011 CSV Edition 2.2 (2012-01-18) Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-66:2002+AMD1:2008 CSV Edition 2.1 (2009-04-29) Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-66:2002 Edition 2.0 (2002-10-09) Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-66:2002/COR1:2004 Edition 2.0 (2004-07-26) Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-66:2002/AMD1:2008 Edition 2.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-66:2002/AMD2:2011 Edition 2.0 (2011-08-30) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters
IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV Edition 2.2 (2009-11-25) Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-73:2002+AMD1:2006 CSV Edition 2.1 (2006-03-21) Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-73:2002 Edition 2.0 (2002-10-09) Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-73:2002/AMD1:2006 Edition 2.0 (2006-01-23) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-73:2002/AMD2:2009 Edition 2.0 (2009-09-29) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-74:2021 Edition 3.0 (2021-09-03) Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters
IEC 60335-2-75:2012 Edition 3.0 (2012-12-14) Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-75:2012/AMD1:2015 Edition 3.0 (2015-10-13) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-75:2012/AMD2:2018 Edition 3.0 (2018-10-12) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
IEC 60335-2-78:2021 Edition 3.0 (2021-11-11) Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues
IEC 60335-2-80:2015 Edition 3.0 (2015-04-16) Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
IEC 60335-2-81:2015 Edition 3.0 (2015-04-09) Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats
IEC 60335-2-81:2015/AMD1:2017 Edition 3.0 (2017-10-05) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats
IEC 60335-2-81:2015/AMD2:2020 Edition 3.0 (2020-06-08) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats
IEC 60335-2-82:2017 Edition 3.0 (2017-10-26) Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
IEC 60335-2-82:2017/AMD1:2020 Edition 3.0 (2020-06-04) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines
IEC 60335-2-83:2001+AMD1:2008 CSV Edition 1.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
IEC 60335-2-83:2001 Edition 1.0 (2001-11-07) Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
IEC 60335-2-83:2001/AMD1:2008 Edition 1.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage
IEC 60335-2-84:2019 Edition 3.0 (2019-10-30) Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances
IEC 60335-2-85:2002+AMD1:2008 CSV Edition 2.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
IEC 60335-2-85:2002 Edition 2.0 (2002-11-26) Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
IEC 60335-2-85:2002/AMD1:2008 Edition 2.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
IEC 60335-2-85:2002/AMD2:2017 Edition 2.0 (2017-07-13) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
IEC 60335-2-95:2019 Edition 4.0 (2019-12-05) Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use
IEC 60335-2-96:2019 Edition 2.0 (2019-05-17) Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating
IEC 60335-2-97:2016 Edition 3.0 (2016-04-20) Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment
IEC 60335-2-97:2016/AMD1:2019 Edition 3.0 (2019-11-28) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment
IEC 60335-2-98:2002+AMD1:2004+AMD2:2008 CSV Edition 2.2 (2008-09-09) Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-98:2002+AMD1:2004 CSV Edition 2.1 (2005-01-11) Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-98:2002 Edition 2.0 (2002-11-26) Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-98:2002/AMD1:2004 Edition 2.0 (2004-11-24) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-98:2002/AMD2:2008 Edition 2.0 (2008-07-17) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-101:2002+AMD1:2008 CSV Edition 1.1 (2008-07-15) Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers
IEC 60335-2-101:2002 Edition 1.0 (2002-07-24) Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers
IEC 60335-2-101:2002/AMD1:2008 Edition 1.0 (2008-04-09) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers
IEC 60335-2-101:2002/AMD2:2014 Edition 1.0 (2014-08-12) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers
IEC 60335-2-102:2017 Edition 2.0 (2017-12-08) Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
IEC 60335-2-103:2015 Edition 3.0 (2015-04-15) Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
IEC 60335-2-103:2015/AMD1:2017 Edition 3.0 (2017-10-13) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
IEC 60335-2-103:2015/AMD2:2019 Edition 3.0 (2019-11-28) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows
IEC 60335-2-105:2016 Edition 2.0 (2016-11-16) Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets
IEC 60335-2-105:2016/AMD1:2019 Edition 2.0 (2019-09-20) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets
IEC 60335-2-106:2021 Edition 2.0 (2021-11-08) Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
IEC 60335-2-108:2008 Edition 1.0 (2008-01-11) Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
IEC 60335-2-109:2010 Edition 1.0 (2010-05-11) Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
IEC 60335-2-109:2010/AMD1:2013 Edition 1.0 (2013-12-10) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
IEC 60335-2-109:2010/AMD2:2016 Edition 1.0 (2016-11-16) Amendment 2 - Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances
IEC 60335-2-111:2015 Edition 1.0 (2015-01-20) Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
IEC 60335-2-113:2016 Edition 1.0 (2016-04-15) Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources
IEC 60335-2-113:2016/AMD1:2021 Edition 1.0 (2021-11-16) Amendment 1 - Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for beauty care appliances incorporating lasers and intense light sources
IEC 60335-2-114:2018 Edition 1.0 (2018-04-10) Household and similar electrical appliances - Safety - Part 2-114: Particular requirements for self-balancing personal transport devices for use with batteries containing alkaline or other non-acid electrolytes
IEC 60335-2-116:2019 Edition 1.0 (2019-11-22) Household and similar electrical appliances - Safety - Part 2-116: Particular requirements for furniture with electrically motorized parts
IEC 60356:1971 Edition 1.0 (1971-01-01) Dimensions for commutators and slip-rings
IEC 60357:2002 Edition 3.0 (2002-11-15) Tungsten halogen lamps (non vehicle) - Performance specifications
IEC 60357:2002/AMD1:2006 Edition 3.0 (2006-04-11) Amendment 1 - Tungsten halogen lamps (non-vehicle) - Performance specifications
IEC 60357:2002/AMD2:2008 Edition 3.0 (2008-10-08) Amendment 2 - Tungsten halogen lamps (non-vehicle) - Performance specifications
IEC 60357:2002/AMD3:2011 Edition 3.0 (2011-01-27) Amendment 3 - Tungsten halogen lamps (non-vehicle) - Performance specifications
IEC 60360:1998 Edition 3.0 (1998-06-10) Standard method of measurement of lamp cap temperature rise
IEC 60360:1998/COR1:1999 Edition 3.0 (1999-03-16) Corrigendum 1 - Standard method of measurement of lamp cap temperature rise
IEC 60364-7-712:2017 Edition 2.0 (2017-04-10) Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
IEC 60364-7-714:2011 Edition 2.0 (2011-12-14) Low-voltage electrical installations - Part 7-714: Requirements for special installations or locations - External lighting installations
IEC 60364-7-715:2011 Edition 2.0 (2011-12-14) Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations
IEC 60370:2017 Edition 2.0 (2017-12-13) Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods
IEC 60371-1:2003 Edition 3.0 (2003-04-09) Specification for insulating materials based on mica - Part 1: Definitions and general requirements
IEC 60371-2:2004 Edition 3.0 (2004-06-23) Specification for insulating materials based on mica - Part 2: Methods of test
IEC 60371-3-1:2006 Edition 3.0 (2006-06-13) Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials
IEC 60371-3-2:2005 Edition 2.0 (2005-10-24) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper
IEC 60371-3-3:1983 Edition 1.0 (1983-01-01) Specification for insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment
IEC 60371-3-4:1992 Edition 1.0 (1992-11-20) Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder
IEC 60371-3-4:1992/AMD1:2006 Edition 1.0 (2006-09-27) Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder
IEC 60371-3-5:2005 Edition 2.0 (2005-11-21) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
IEC 60371-3-6:1992 Edition 1.0 (1992-11-30) Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder
IEC 60371-3-6:1992/AMD1:2006 Edition 1.0 (2006-09-27) Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder
IEC 60371-3-7:1995 Edition 1.0 (1995-08-30) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
IEC 60371-3-7:1995/AMD1:2006 Edition 1.0 (2006-09-27) Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
IEC 60371-3-8:1995 Edition 1.0 (1995-08-30) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables
IEC 60371-3-8:1995/AMD1:2007 Edition 1.0 (2007-04-11) Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables
IEC 60371-3-9:1995 Edition 1.0 (1995-08-30) Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
IEC 60371-3-9:1995/AMD1:2007 Edition 1.0 (2007-04-11) Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite
IEC 60394-1:1972 Edition 1.0 (1972-01-01) Varnished fabrics for electrical purposes. Part 1: Definitions and general requirements
IEC 60394-2:1972 Edition 1.0 (1972-01-01) Varnished fabrics for electrical purposes. Part 2: Methods of test
IEC 60394-3-1:1976 Edition 1.0 (1976-01-01) Varnished fabrics for electrical purposes. Part 3-1: Specifications for individual materials. Oleoresinous varnish-cotton base, OR/C
IEC 60394-3-2:1988 Edition 1.0 (1988-03-30) Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Glass-fabric based varnished fabrics with epoxy, polyuréthane, silicone, polyester, bituminous or oleoresinous varnish
IEC 60399:2004+AMD1:2008 CSV Edition 2.1 (2008-10-21) Barrel thread for lampholders with shade holder ring
IEC 60399:2004 Edition 2.0 (2004-10-07) Barrel thread for lampholders with shade holder ring
IEC 60399:2004/AMD1:2008 Edition 2.0 (2008-07-08) Amendment 1 - Barrel thread for lampholders with shade holder ring
IEC 60400:2017 Edition 8.0 (2017-06-15) Lampholders for tubular fluorescent lamps and starterholders
IEC 60400:2017/AMD1:2020 Edition 8.0 (2020-02-25) Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders
IEC 60400:2017/AMD2:2022 Edition 8.0 (2022-02-01) Amendment 2 - Lampholders for tubular fluorescent lamps and starterholders
IEC 60413:1972 Edition 1.0 (1972-01-01) Test procedures for determining physical properties of brush materials for electrical machines
IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Edition 2.2 (2012-02-10) Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1:1999+AMD1:2005 CSV Edition 2.1 (2005-05-12) Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1:1999 Edition 2.0 (1999-08-13) Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1:1999/AMD1:2005 Edition 2.0 (2005-03-07) Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1:1999/AMD2:2011 Edition 2.0 (2011-12-07) Amendment 2 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Edition 2.2 (2012-05-15) Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999+AMD1:2005 CSV Edition 2.1 (2005-05-12) Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999 Edition 2.0 (1999-10-13) Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999/AMD1:2005 Edition 2.0 (2005-03-07) Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes
IEC 60432-2:1999/AMD2:2012 Edition 2.0 (2012-03-22) Amendment 2 - Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
IEC 60432-3:2012 Edition 2.0 (2012-07-04) Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)
IEC 60434:1973 Edition 1.0 (1973-01-01) Aircraft electrical filament lamps
IEC 60434:1973/AMD1:1981 Edition 1.0 (1981-08-01) Amendment 1 - Aircraft electrical filament lamps
IEC 60434:1973/AMD2:1984 Edition 1.0 (1984-01-01) Amendment 2 - Aircraft electrical filament lamps
IEC 60454-1:1992 Edition 2.0 (1992-05-31) Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements
IEC 60454-2:2007 Edition 3.0 (2007-06-21) Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
IEC 60454-2:2007/COR1:2009 Edition 3.0 (2009-12-17) Corrigendum 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test
IEC 60454-3-1:1998+AMD1:2001 CSV Edition 2.1 (2002-12-19) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive
IEC 60454-3-1:1998 Edition 2.0 (1998-02-19) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive
IEC 60454-3-1:1998/AMD1:2001 Edition 2.0 (2001-05-28) Amendment 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive
IEC 60454-3-2:2006 Edition 3.0 (2006-01-23) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives
IEC 60454-3-4:2007 Edition 3.0 (2007-06-05) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive
IEC 60454-3-7:1998 Edition 2.0 (1998-03-16) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive
IEC 60454-3-8:2006 Edition 3.0 (2006-02-13) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
IEC 60454-3-11:2007 Edition 2.0 (2007-05-10) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive
IEC 60454-3-12:2006 Edition 2.0 (2006-01-23) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive
IEC 60454-3-14:2001 Edition 1.0 (2001-07-10) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive
IEC 60454-3-19:2003 Edition 1.0 (2003-05-19) Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides
IEC 60455-1:1998 Edition 2.0 (1998-08-25) Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements
IEC 60455-2:2015 Edition 3.0 (2015-06-25) Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
IEC 60455-2-2:1984 Edition 1.0 (1984-01-01) Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 2-2: Methods of test - Test methods for coating powders for electrical purposes
IEC 60455-3-1:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds
IEC 60455-3-2:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds
IEC 60455-3-3:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds
IEC 60455-3-4:2003 Edition 2.0 (2003-04-28) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds
IEC 60455-3-5:2006 Edition 3.0 (2006-03-08) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins
IEC 60455-3-8:2021 Edition 2.0 (2021-06-16) Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories
IEC 60455-3-11:1988 Edition 1.0 (1988-04-15) Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resin-based coating powders
IEC 60464-1:1998 Edition 2.0 (1998-11-16) Varnishes used for electrical insulation - Part 1: Definitions and general requirements
IEC 60464-1:1998/AMD1:2006 Edition 2.0 (2006-01-17) Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements
IEC 60464-2:2001 Edition 2.0 (2001-07-31) Varnishes used for electrical insulation - Part 2: Methods of test
IEC 60464-2:2001/AMD1:2006 Edition 2.0 (2006-01-17) Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test
IEC 60464-3-1:2001 Edition 2.0 (2001-07-10) Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
IEC 60464-3-1:2001/AMD1:2006 Edition 2.0 (2006-01-17) Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
IEC 60464-3-2:2001 Edition 2.0 (2001-07-10) Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
IEC 60464-3-2:2001/AMD1:2006 Edition 2.0 (2006-04-27) Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
IEC 60554-1:1977 Edition 1.0 (1977-01-01) Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements
IEC 60554-1:1977/AMD1:1983 Edition 1.0 (1983-01-01) Amendment 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements
IEC 60554-2:2001 Edition 2.0 (2001-11-08) Cellulosic papers for electrical purposes - Part 2: Methods of test
IEC 60554-3-1:1979 Edition 1.0 (1979-01-01) Specification for cellulosic papers for electrical purposes. Part 3-1: Specifications for individual materials. General purpose electrical paper
IEC 60554-3-2:1983 Edition 1.0 (1983-01-01) Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper
IEC 60554-3-3:1980 Edition 1.0 (1980-01-01) Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper
IEC 60554-3-4:1979 Edition 1.0 (1979-01-01) Specification for cellulosic papers for electrical purposes. Part 3-4: Specifications for individual materials. Electrolytic capacitor paper
IEC 60554-3-5:1984 Edition 1.0 (1984-01-01) Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers
IEC 60560:1977 Edition 1.0 (1977-01-01) Definitions and terminology of brush-holders for electrical machines
IEC 60570:2003 Edition 4.0 (2003-01-30) Electrical supply track systems for luminaires
IEC 60570:2003/AMD1:2017 Edition 4.0 (2017-04-05) Amendment 1 - Electrical supply track systems for luminaires
IEC 60570:2003/AMD2:2019 Edition 4.0 (2019-12-11) Amendment 2 - Electrical supply track systems for luminaires
IEC 60598-1:2020 Edition 9.0 (2020-08-17) Luminaires - Part 1: General requirements and tests
IEC 60598-2-1:2020 Edition 2.0 (2020-01-28) Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires
IEC 60598-2-2:2011 Edition 3.0 (2011-11-08) Luminaires - Part 2-2: Particular requirements - Recessed luminaires
IEC 60598-2-3:2002+AMD1:2011 CSV Edition 3.1 (2011-11-17) Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
IEC 60598-2-3:2002 Edition 3.0 (2002-12-04) Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
IEC 60598-2-3:2002/AMD1:2011 Edition 3.0 (2011-04-14) Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
IEC 60598-2-4:2017 Edition 3.0 (2017-04-21) Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires
IEC 60598-2-5:2015 Edition 3.0 (2015-08-06) Luminaires - Part 2-5: Particular requirements - Floodlights
IEC 60598-2-8:2013 Edition 3.0 (2013-04-29) Luminaires - Part 2-8: Particular requirements - Handlamps
IEC 60598-2-10:2003 Edition 2.0 (2003-05-19) Luminaires - Part 2-10: Particular requirements - Portable luminaires for children
IEC 60598-2-11:2013 Edition 2.0 (2013-05-16) Luminaires - Part 2-11: Particular requirements - Aquarium luminaires
IEC 60598-2-12:2013 Edition 2.0 (2013-04-29) Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights
IEC 60598-2-13:2006+AMD1:2011 CSV Edition 1.1 (2012-02-10) Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
IEC 60598-2-13:2006 Edition 1.0 (2006-06-13) Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
IEC 60598-2-13:2006/AMD1:2011 Edition 1.0 (2011-12-07) Amendment 1 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
IEC 60598-2-13:2006/AMD2:2016 Edition 1.0 (2016-05-25) Amendment 2 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires
IEC 60598-2-14:2009 Edition 1.0 (2009-02-05) Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment
IEC 60598-2-17:2017 Edition 2.0 (2017-05-30) Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)
IEC 60598-2-18:1993 Edition 2.0 (1993-04-26) Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications
IEC 60598-2-18:1993/COR1:2013 Edition 2.0 (2013-03-21) Corrigendum 1 - Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications
IEC 60598-2-18:1993/AMD1:2011 Edition 2.0 (2011-12-14) Amendment 1 - Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications
IEC 60598-2-19:1981 Edition 1.0 (1981-01-01) Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)
IEC 60598-2-19:1981/AMD1:1987 Edition 1.0 (1987-01-01) Amendment 1 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)
IEC 60598-2-19:1981/AMD2:1997 Edition 1.0 (1997-12-11) Amendment 2 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)
IEC 60598-2-20:2022 Edition 5.0 (2022-01-31) Luminaires - Part 2-20: Particular requirements - Lighting chains
IEC 60598-2-21:2014 Edition 1.0 (2014-11-25) Luminaires - Part 2-21: Particular requirements - Rope lights
IEC 60598-2-21:2014/COR1:2016 Edition 1.0 (2016-12-16) Corrigendum 1 - Luminaires - Part 2-21: Particular requirements - Rope lights
IEC 60598-2-23:2020 Edition 2.0 (2020-07-20) Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources
IEC 60598-2-24:2013 Edition 2.0 (2013-06-19) Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures
IEC 60598-2-25:1994 Edition 1.0 (1994-08-17) Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings
IEC 60598-2-25:1994/AMD1:2004 Edition 1.0 (2004-09-28) Amendment 1 - Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings
IEC 60626-1:2009 Edition 3.0 (2009-08-31) Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements
IEC 60626-2:2009 Edition 3.0 (2009-09-29) Combined flexible materials for electrical insulation - Part 2: Methods of test
IEC 60626-3:2008 Edition 3.0 (2008-07-21) Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
IEC 60626-3:2008/AMD1:2012 Edition 3.0 (2012-07-17) Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials
IEC 60630:2005 CSV Edition 2.5 (2005-04-25) Maximum lamp outlines for incandescent lamps
IEC 60630:2002 CSV Edition 2.4 (2002-12-19) Maximum lamp outlines for incandescent lamps
IEC 60630:1994+AMD1:1997+AMD2:1998+AMD3:1999 CSV Edition 2.3 (2001-05-25) Maximum lamp outlines for incandescent lamps
IEC 60630:1994 Edition 2.0 (1994-09-09) Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD1:1997 Edition 2.0 (1997-06-05) Amendment 1 - Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD2:1998 Edition 2.0 (1998-02-27) Amendment 2 - Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD3:1999 Edition 2.0 (1999-07-09) Amendment 3 - Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD4:2002 Edition 2.0 (2002-11-28) Amendment 4 - Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD5:2005 Edition 2.0 (2005-03-17) Amendment 5 - Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD6:2009 Edition 2.0 (2009-05-19) Amendment 6 - Maximum lamp outlines for incandescent lamps
IEC 60630:1994/AMD7:2014 Edition 2.0 (2014-06-27) Amendment 7 - Maximum lamp outlines for incandescent lamps
IEC 60641-1:2007 Edition 2.0 (2007-11-14) Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements
IEC 60641-2:2004 Edition 2.0 (2004-06-23) Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
IEC 60641-3-1:2008 Edition 2.0 (2008-07-21) Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1
IEC 60641-3-2:2007 Edition 2.0 (2007-11-14) Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
IEC 60662:2011 Edition 2.0 (2011-02-23) High-pressure sodium vapour lamps - Performance specifications
IEC 60664-1:2020 Edition 3.0 (2020-05-26) Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
IEC 60664-1:2020/COR1:2020 Edition 3.0 (2020-10-27) Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
IEC TR 60664-2-1:2011 Edition 2.0 (2011-01-31) Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
IEC TR 60664-2-1:2011/COR1:2011 Edition 2.0 (2011-10-24) Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
IEC TR 60664-2-2:2002 Edition 1.0 (2002-01-22) Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide
IEC 60664-3:2016 Edition 3.0 (2016-11-04) Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
IEC 60664-4:2005 Edition 2.0 (2005-09-15) Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
IEC 60667-1:2020 Edition 2.0 (2020-04-09) Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements
IEC 60667-2:2020 Edition 2.0 (2020-05-13) Vulcanized fibre for electrical purposes - Part 2: Methods of test
IEC 60667-3-1:2020 Edition 2.0 (2020-03-25) Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets
IEC 60672-1:1995 Edition 2.0 (1995-06-27) Ceramic and glass insulating materials - Part 1: Definitions and classification
IEC 60672-2:1999 Edition 2.0 (1999-12-22) Ceramic and glass insulating materials - Part 2: Methods of test
IEC 60672-3:1997 Edition 2.0 (1997-10-17) Ceramic and glass-insulating materials - Part 3: Specifications for individual materials
IEC 60674-1:1980 Edition 1.0 (1980-01-01) Specification for plastic films for electrical purposes. Part 1: Definitions and general requirements
IEC 60674-2:2016 Edition 2.0 (2016-11-18) Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 60674-2:2016/COR1:2017 Edition 2.0 (2017-12-19) Corrigendum 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 60674-2:2016/AMD1:2019 Edition 2.0 (2019-01-24) Amendment 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test
IEC 60674-3-1:2021 Edition 2.0 (2021-08-25) Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors
IEC 60674-3-2:2019 Edition 2.0 (2019-01-16) Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation
IEC 60674-3-3:1992 Edition 1.0 (1992-04-30) Specification for plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Requirements forpolycarbonate (PC) films used for electrical insulation
IEC 60674-3-4:2022 Edition 2.0 (2022-06-22) Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation
IEC 60674-3-7:1992 Edition 1.0 (1992-04-30) Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation
IEC 60674-3-8:2011 Edition 1.0 (2011-07-13) Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
IEC 60674-3-8:2011/AMD1:2016 Edition 1.0 (2016-11-22) Amendment 1 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
IEC 60682:1980 Edition 1.0 (1980-01-01) Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60682:1980/AMD1:1987 Edition 1.0 (1987-01-01) Amendment 1 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60682:1980/AMD2:1997 Edition 1.0 (1997-04-23) Amendment 2 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps
IEC 60684-1:2003 Edition 2.0 (2003-04-28) Flexible insulating sleeving - Part 1: Definitions and general requirements
IEC 60684-2:2011 Edition 3.0 (2011-08-10) Flexible insulating sleeving - Part 2: Methods of test
IEC 60684-3-100:2001 Edition 2.0 (2001-07-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving
IEC 60684-3-116:2010 Edition 3.0 (2010-06-16) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose
IEC 60684-3-121:2001 Edition 2.0 (2001-07-18) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving
IEC 60684-3-136:1997 Edition 1.0 (1997-12-22) Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose
IEC 60684-3-136:1997/COR1:1999 Edition 1.0 (1999-02-19) Corrigendum 1 - Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose
IEC 60684-3-145:2001 Edition 1.0 (2001-07-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving
IEC 60684-3-151:1998 Edition 1.0 (1998-06-11) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose
IEC 60684-3-165:2004 Edition 1.0 (2004-05-11) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving
IEC 60684-3-205:2011 Edition 1.0 (2011-06-21) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1
IEC 60684-3-209:2010 Edition 3.0 (2010-06-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded
IEC 60684-3-211:2007 Edition 3.0 (2007-02-15) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1
IEC 60684-3-212:2005 Edition 2.0 (2005-11-21) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
IEC 60684-3-214:2019 Edition 4.0 (2019-08-08) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
IEC 60684-3-216:2019 Edition 2.0 (2019-08-08) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving
IEC 60684-3-228:2004 Edition 2.0 (2004-05-11) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
IEC 60684-3-229:2003 Edition 1.0 (2003-02-17) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1
IEC 60684-3-233:2006 Edition 2.0 (2006-01-17) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
IEC 60684-3-240:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving
IEC 60684-3-246:2007 Edition 3.0 (2007-02-15) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded
IEC 60684-3-247:2019 Edition 2.0 (2019-08-08) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
IEC 60684-3-248:2007 Edition 1.0 (2007-02-16) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
IEC 60684-3-271:2011 Edition 3.0 (2011-06-21) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
IEC 60684-3-280:2019 Edition 2.0 (2019-08-20) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
IEC 60684-3-281:2010 Edition 1.0 (2010-06-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
IEC 60684-3-282:2010 Edition 1.0 (2010-06-10) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control
IEC 60684-3-283:2019 Edition 2.0 (2019-08-20) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation
IEC 60684-3-284:2014 Edition 1.0 (2014-10-23) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications
IEC 60684-3-285:2014 Edition 1.0 (2014-10-17) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation
IEC 60684-3-300:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated
IEC 60684-3-320:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated
IEC 60684-3-340:2003 Edition 2.0 (2003-04-29) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving
IEC 60684-3-343:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated
IEC 60684-3-400:2002 Edition 2.0 (2002-06-12) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating
IEC 60684-3-403:2002 Edition 2.0 (2002-05-17) Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating
IEC 60684-3-406:2003 Edition 2.0 (2003-07-29) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating
IEC 60684-3-409:1999 Edition 1.0 (1999-06-30) Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating
IEC 60684-3-420:2002 Edition 2.0 (2002-05-17) Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating
IEC TS 60695-11-21:2005 Edition 1.0 (2005-05-04) Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
IEC 60755:2017 Edition 1.0 (2017-10-26) General safety requirements for residual current operated protective devices
IEC 60763-1:2010 Edition 2.0 (2010-08-06) Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements
IEC 60763-2:2007 Edition 2.0 (2007-02-15) Specification for laminated pressboard - Part 2: Methods of test
IEC 60763-3-1:2010 Edition 2.0 (2010-08-06) Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2
IEC TR 60778:1984 Edition 1.0 (1984-01-01) Brush-holders for slip-rings, Group R - type RA
IEC 60793-1-1:2022 Edition 5.0 (2022-06-20) Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
IEC 60793-1-20:2014 Edition 2.0 (2014-10-10) Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
IEC 60793-1-20:2014/COR1:2016 Edition 2.0 (2016-03-04) Corrigendum 1 - Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
IEC 60793-1-21:2001 Edition 1.0 (2001-08-30) Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry
IEC 60793-1-22:2001 Edition 1.0 (2001-08-30) Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
IEC 60793-1-30:2010 Edition 2.0 (2010-05-19) Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test
IEC 60793-1-31:2019 Edition 3.0 (2019-02-06) Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
IEC 60793-1-32:2018 Edition 3.0 (2018-11-16) Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
IEC 60793-1-33:2017 Edition 2.0 (2017-08-16) Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
IEC 60793-1-34:2021 Edition 3.0 (2021-02-10) Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl
IEC 60793-1-40:2019 Edition 2.0 (2019-03-27) Optical fibres - Part 1-40: Attenuation measurement methods
IEC 60793-1-41:2010 Edition 3.0 (2010-08-31) Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
IEC 60793-1-42:2013 Edition 3.0 (2013-01-24) Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion
IEC 60793-1-43:2015 Edition 2.0 (2015-03-27) Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
IEC 60793-1-44:2011 Edition 2.0 (2011-04-20) Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
IEC 60793-1-45:2017 Edition 2.0 (2017-11-09) Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
IEC 60793-1-46:2001 Edition 1.0 (2001-07-26) Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
IEC 60793-1-47:2017 Edition 4.0 (2017-10-11) Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
IEC 60793-1-48:2017 Edition 3.0 (2017-08-23) Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
IEC 60793-1-49:2018 Edition 3.0 (2018-08-15) Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
IEC 60793-1-50:2014 Edition 2.0 (2014-09-09) Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
IEC 60793-1-51:2014 Edition 2.0 (2014-02-05) Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
IEC 60793-1-52:2014 Edition 2.0 (2014-02-05) Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
IEC 60793-1-53:2014 Edition 2.0 (2014-02-05) Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
IEC 60793-1-54:2018 Edition 3.0 (2018-01-12) Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
IEC 60793-1-60:2017 Edition 1.0 (2017-02-07) Optical fibres - Part 1-60: Measurement methods and test procedures - Beat length
IEC 60793-1-61:2017 Edition 1.0 (2017-02-07) Optical fibres - Part 1-61: Measurement methods and test procedures - Polarization crosstalk
IEC 60793-2:2019 Edition 9.0 (2019-11-15) Optical fibres - Part 2: Product specifications - General
IEC 60793-2-10:2019 Edition 7.0 (2019-05-22) Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
IEC 60793-2-10:2019/AMD1:2022 Edition 7.0 (2022-01-27) Amendment 1 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
IEC 60793-2-20:2015 Edition 3.0 (2015-11-19) Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres
IEC 60793-2-30:2015 Edition 4.0 (2015-06-25) Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres
IEC 60793-2-40:2021 Edition 5.0 (2021-02-25) Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres
IEC 60793-2-50:2018 Edition 6.0 (2018-12-14) Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres
IEC 60793-2-60:2008 Edition 1.0 (2008-02-27) Optical fibres - Part 2-60: Product specifications - Sectional specification for category C single-mode intraconnection fibres
IEC 60793-2-70:2017 Edition 1.0 (2017-02-07) Optical fibres - Part 2-70: Product specifications - Sectional specification for polarization-maintaining fibres
IEC 60794-1-1:2015 Edition 4.0 (2015-11-13) Optical fibre cables - Part 1-1: Generic specification - General
IEC 60794-1-2:2021 Edition 5.0 (2021-01-15) Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
IEC 60794-1-3:2017 Edition 1.0 (2017-05-11) Optical fibre cables - Part 1-3: Generic specification - Optical cable elements
IEC 60794-1-21:2015 Edition 1.0 (2015-03-10) Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
IEC 60794-1-21:2015/AMD1:2020 Edition 1.0 (2020-03-05) Amendment 1 - Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
IEC 60794-1-22:2017 Edition 2.0 (2017-10-05) Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods
IEC 60794-1-23:2019 Edition 2.0 (2019-10-09) Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
IEC 60794-1-31:2021 Edition 2.0 (2021-06-28) Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon
IEC 60794-1-215:2020 Edition 1.0 (2020-06-26) Optical fibre cables – Part 1-215: Generic specification – Basic optical cable test procedures – Environmental test methods – Cable external freezing test, Method F15
IEC 60794-2:2017 Edition 4.0 (2017-06-22) Optical fibre cables - Part 2: Indoor cables - Sectional specification
IEC 60794-2-10:2011 Edition 2.0 (2011-08-10) Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables
IEC 60794-2-11:2019 Edition 3.0 (2019-04-12) Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
IEC 60794-2-11:2019/AMD1:2020 Edition 3.0 (2020-11-18) Amendment 1 - Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
IEC 60794-2-20:2013 Edition 3.0 (2013-11-05) Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
IEC 60794-2-21:2019 Edition 3.0 (2019-04-12) Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
IEC 60794-2-21:2019/AMD1:2020 Edition 3.0 (2020-11-18) Amendment 1 - Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
IEC 60794-2-22:2016 Edition 1.0 (2016-12-07) Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
IEC 60794-2-30:2019 Edition 3.0 (2019-03-18) Optical fibre cables - Part 2-30: Indoor cables - Family specification for optical fibre ribbon cables for use in terminated cable assemblies
IEC 60794-2-31:2019 Edition 3.0 (2019-04-12) Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
IEC 60794-2-31:2019/AMD1:2020 Edition 3.0 (2020-11-18) Amendment 1 - Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
IEC 60794-2-40:2008 Edition 2.0 (2008-03-26) Optical fibre cables - Part 2-40: Indoor optical fibre cables - Family specification for A4 fibre cables
IEC 60794-2-41:2008 Edition 1.0 (2008-06-25) Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres
IEC 60794-2-42:2008 Edition 1.0 (2008-04-09) Optical fibre cables - Part 2-42: Indoor optical fibre cables - Product specification for simplex and duplex cables with A4 fibres
IEC 60794-2-50:2020 Edition 2.0 (2020-01-10) Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies
IEC 60794-3:2022 Edition 5.0 (2022-02-17) Optical fibre cables - Part 3: Outdoor cables - Sectional specification
IEC 60794-3-10:2015 Edition 3.0 (2015-01-08) Optical fibre cables - Part 3-10: Outdoor cables - Family specification for duct, directly buried and lashed aerial optical telecommunication cables
IEC 60794-3-11:2010 Edition 2.0 (2010-06-16) Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables
IEC 60794-3-12:2021 Edition 3.0 (2021-01-27) Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
IEC 60794-3-20:2016 Edition 3.0 (2016-09-15) Optical fibre cables - Part 3-20: Outdoor cables - Family specification for self-supporting aerial telecommunication cables
IEC 60794-3-21:2015 Edition 2.0 (2015-11-19) Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
IEC 60794-3-30:2008 Edition 2.0 (2008-04-29) Optical fibre cables - Part 3-30: Outdoor cables - Family specification for optical telecommunication cables for lakes, river crossings and coastal application
IEC 60794-3-40:2022 Edition 2.0 (2022-04-27) Optical fibre cables - Part 3-40: Outdoor cables - Family specification for cables for storm and sanitary sewers
IEC 60794-3-70:2021 Edition 2.0 (2021-04-07) Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
IEC 60794-4:2018 Edition 2.0 (2018-06-25) Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines
IEC 60794-4-10:2014 Edition 2.0 (2014-10-29) Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines
IEC 60794-4-20:2018 Edition 2.0 (2018-08-28) Optical fibre cables - Part 4-20: Sectional specification - Aerial optical cables along electrical power lines - Family specification for ADSS (all dielectric self-supported) optical cables
IEC 60794-5:2014 Edition 2.0 (2014-10-08) Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
IEC 60794-5-10:2014 Edition 1.0 (2014-02-05) Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
IEC 60794-5-20:2014 Edition 1.0 (2014-02-14) Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
IEC 60810:2017 Edition 5.0 (2017-09-25) Lamps, light sources and LED packages for road vehicles - Performance requirements
IEC 60810:2017/AMD1:2019 Edition 5.0 (2019-04-08) Amendment 1 - Lamps, light sources and LED packages for road vehicles - Performance requirements
IEC 60810:2017/AMD2:2022 Edition 5.0 (2022-04-28) Amendment 2 - Lamps, light sources and LED packages for road vehicles - Performance requirements
IEC 60819-1:2009 Edition 3.0 (2009-09-29) Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
IEC 60819-2:2001 Edition 1.0 (2001-07-04) Non-cellulosic papers for electrical purposes - Part 2: Methods of test
IEC 60819-3-1:2001 Edition 1.0 (2001-07-05) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper
IEC 60819-3-2:2001 Edition 1.0 (2001-07-04) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper
IEC 60819-3-3:2011 Edition 3.0 (2011-09-13) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers
IEC 60819-3-4:2013 Edition 2.0 (2013-12-12) Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
IEC 60838-1:2016 Edition 5.0 (2016-05-19) Miscellaneous lampholders - Part 1: General requirements and tests
IEC 60838-1:2016/AMD1:2017 Edition 5.0 (2017-02-02) Amendment 1 - Miscellaneous lampholders - Part 1: General requirements and tests
IEC 60838-1:2016/AMD2:2020 Edition 5.0 (2020-02-26) Amendment 2 - Miscellaneous lampholders - Part 1: General requirements and tests
IEC 60838-2-1:1994 Edition 1.0 (1994-10-15) Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14
IEC 60838-2-1:1994/AMD1:1998 Edition 1.0 (1998-06-10) Amendment 1 - Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14
IEC 60838-2-1:1994/AMD2:2004 Edition 1.0 (2004-10-07) Amendment 2 - Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14
IEC 60838-2-1:1994/AMD2:2004/COR1:2013 Edition 1.0 (2013-05-22) Corrigendum 1 - Amendment 2 - Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14
IEC 60838-2-2:2006+AMD1:2012 CSV Edition 1.1 (2012-04-27) Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
IEC 60838-2-2:2006 Edition 1.0 (2006-05-05) Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
IEC 60838-2-2:2006/AMD1:2012 Edition 1.0 (2012-03-27) Amendment 1 - Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules
IEC 60838-2-3:2016 Edition 1.0 (2016-05-12) Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps
IEC TR 60882:1986 Edition 1.0 (1986-12-15) Pre-heat requirements for starterless tubular fluorescent lamps
IEC TR 60887:2010 Edition 3.0 (2010-06-24) Glass bulb designation system for lamps
IEC 60893-1:2004 Edition 2.0 (2004-01-26) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
IEC 60893-2:2003 Edition 2.0 (2003-06-24) Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 60893-3-1:2012 Edition 3.0 (2012-07-24) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets
IEC 60893-3-2:2003+AMD1:2011 CSV Edition 2.1 (2011-11-28) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
IEC 60893-3-2:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
IEC 60893-3-2:2003/AMD1:2011 Edition 2.0 (2011-05-27) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
IEC 60893-3-3:2003+AMD1:2011 CSV Edition 2.1 (2012-01-27) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-3:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-3:2003/AMD1:2011 Edition 2.0 (2011-11-28) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins
IEC 60893-3-4:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-4:2003/COR1:2014 Edition 2.0 (2014-03-19) Corrigendum 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-4:2003/AMD1:2012 Edition 2.0 (2012-10-12) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins
IEC 60893-3-5:2003+AMD1:2009 CSV Edition 2.1 (2009-10-13) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-5:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-5:2003/AMD1:2009 Edition 2.0 (2009-08-28) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins
IEC 60893-3-6:2003+AMD1:2009 CSV Edition 2.1 (2009-11-10) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-6:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-6:2003/AMD1:2009 Edition 2.0 (2009-09-29) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-6:2003/AMD2:2017 Edition 2.0 (2017-09-15) Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
IEC 60893-3-7:2003+AMD1:2009 CSV Edition 2.1 (2009-11-10) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-7:2003 Edition 2.0 (2003-11-14) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
IEC 60893-3-7:2003/AMD1:2009 Edition 2.0 (2009-09-29) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins
IEC TR 60893-4:2014 Edition 2.0 (2014-10-29) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC TR 60893-4:2014/AMD1:2017 Edition 2.0 (2017-09-22) Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values
IEC 60898-1:2015 Edition 2.0 (2015-03-23) Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
IEC 60898-1:2015/COR1:2015 Edition 2.0 (2015-11-18) Corrigendum 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
IEC 60898-1:2015/AMD1:2019 Edition 2.0 (2019-12-13) Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
IEC 60898-1:2015/AMD1:2019/COR1:2020 Edition 2.0 (2020-03-26) Corrigendum 1 - Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
IEC 60898-2:2016 Edition 2.0 (2016-08-17) Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for AC and DC operation
IEC 60898-3:2019 Edition 1.0 (2019-04-05) Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
IEC 60898-3:2019/AMD1:2022 Edition 1.0 (2022-02-11) Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation
IEC 60901:1996+AMD1:1997+AMD2:2000 CSV Edition 2.2 (2001-11-20) Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996 Edition 2.0 (1996-03-20) Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996/AMD1:1997 Edition 2.0 (1997-06-05) Amendment 1 - Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996/AMD2:2000 Edition 2.0 (2000-04-28) Amendment 2 - Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996/AMD3:2004 Edition 2.0 (2004-05-17) Amendment 3 - Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996/AMD4:2007 Edition 2.0 (2007-12-07) Amendment 4 - Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996/AMD5:2011 Edition 2.0 (2011-11-23) Amendment 5 - Single-capped fluorescent lamps - Performance specifications
IEC 60901:1996/AMD6:2014 Edition 2.0 (2014-12-17) Amendment 6 - Single-capped fluorescent lamps - Performance specifications
IEC 60921:2004+AMD1:2006 CSV Edition 2.1 (2006-06-26) Ballasts for tubular fluorescent lamps - Performance requirements
IEC 60921:2004 Edition 2.0 (2004-08-09) Ballasts for tubular fluorescent lamps - Performance requirements
IEC 60921:2004/AMD1:2006 Edition 2.0 (2006-05-05) Amendment 1 - Ballasts for tubular fluorescent lamps - Performance requirements
IEC 60923:2005+AMD1:2006 CSV Edition 3.1 (2006-09-25) Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
IEC 60923:2005 Edition 3.0 (2005-09-07) Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
IEC 60923:2005/AMD1:2006 Edition 3.0 (2006-07-25) Amendment 1 - Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
IEC 60927:2007 Edition 3.0 (2007-06-14) Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
IEC 60927:2007/AMD1:2013 Edition 3.0 (2013-09-16) Amendment 1 - Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
IEC 60929:2011 Edition 4.0 (2011-05-19) AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
IEC 60929:2011/COR1:2011 Edition 4.0 (2011-09-22) Corrigendum 1 - AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
IEC 60929:2011/AMD1:2015 Edition 4.0 (2015-10-22) Amendment 1 - AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements
IEC 60934:2019 Edition 4.0 (2019-01-30) Circuit breakers for equipment (CBE)
IEC 60968:2015 Edition 3.0 (2015-02-05) Self-ballasted fluorescent lamps for general lighting services - Safety requirements
IEC 60968:2015/COR1:2015 Edition 3.0 (2015-03-23) Corrigendum 1 - Self-ballasted flourescent lamps for general lighting services - Safety requirements
IEC 60969:2016 Edition 2.0 (2016-10-13) Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements
IEC 60969:2016/COR1:2017 Edition 2.0 (2017-01-27) Corrigendum 1 - Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements
IEC 60983:1995+AMD1:2005 CSV Edition 2.1 (2005-04-25) Miniature lamps
IEC 60983:1995 Edition 2.0 (1995-03-29) Miniature lamps
IEC 60983:1995/AMD1:2005 Edition 2.0 (2005-03-17) Amendment 1 - Miniature lamps
IEC 61008-1:2010 Edition 3.0 (2010-02-11) Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-1:2010/AMD1:2012 Edition 3.0 (2012-04-30) Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-1:2010/AMD1:2012/COR1:2016 Edition 3.0 (2016-05-18) Corrigendum 1 - Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBS) - Part 1: General rules
IEC 61008-1:2010/AMD2:2013 Edition 3.0 (2013-09-12) Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-1:2010/AMD2:2013/COR1:2014 Edition 3.0 (2014-01-28) Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-2-1:1990 Edition 1.0 (1990-12-17) Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage
IEC 61008-2-2:1990 Edition 1.0 (1990-12-17) Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage
IEC 61009-1:2010 Edition 3.0 (2010-02-11) Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61009-1:2010/AMD1:2012 Edition 3.0 (2012-04-30) Amendment 1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61009-1:2010/AMD2:2013 Edition 3.0 (2013-09-12) Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61009-1:2010/AMD2:2013/COR1:2014 Edition 3.0 (2014-01-28) Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules
IEC 61009-2-1:1991 Edition 1.0 (1991-07-01) Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage
IEC 61009-2-2:1991 Edition 1.0 (1991-07-01) Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage
IEC TR 61015:1990 Edition 1.0 (1990-03-31) Brush-holders for electrical machines. Guide to the measurement of the static thrust applied to brushes
IEC 61033:1991 Edition 1.0 (1991-05-16) Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
IEC 61033:1991/AMD1:2006 Edition 1.0 (2006-04-27) Amendment 1 - Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
IEC 61047:2004 Edition 2.0 (2004-06-08) DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements
IEC 61048:2006 Edition 2.0 (2006-03-20) Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
IEC 61048:2006/AMD1:2015 Edition 2.0 (2015-07-07) Amendment 1 - Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
IEC 61049:1991 Edition 1.0 (1991-03-19) Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
IEC 61050:1991 Edition 1.0 (1991-03-19) Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
IEC 61050:1991/AMD1:1994 Edition 1.0 (1994-06-01) Amendment 1 - Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
IEC 61061-1:2006 Edition 3.0 (2006-10-25) Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements
IEC 61061-2:1992+AMD1:2001 CSV Edition 1.1 (2001-10-25) Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test
IEC 61061-2:1992 Edition 1.0 (1992-09-15) Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test
IEC 61061-2:1992/AMD1:2001 Edition 1.0 (2001-07-10) Amendment 1 - Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test
IEC 61061-3-1:1998 Edition 1.0 (1998-07-24) Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Sheets produced from beech veneer
IEC 61061-3-2:2001 Edition 1.0 (2001-07-10) Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Rings produced from beech veneer
IEC 61067-1:1991 Edition 1.0 (1991-06-15) Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements
IEC 61067-2:1992 Edition 1.0 (1992-05-31) Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test
IEC 61067-3-1:1995 Edition 1.0 (1995-04-13) Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes
IEC 61068-1:1991 Edition 1.0 (1991-06-15) Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements
IEC 61068-2:1991 Edition 1.0 (1991-06-17) Specification for polyester fibre woven tapes - Part 2: Methods of test
IEC 61068-3-1:1995 Edition 2.0 (1995-02-15) Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms
IEC 61068-3-1:1995/COR1:1998 Edition 2.0 (1998-01-30) Corrigendum 1 - Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms
IEC 61086-1:2004 Edition 2.0 (2004-01-26) Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements
IEC 61086-2:2004 Edition 2.0 (2004-02-17) Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
IEC 61086-2:2004/COR1:2005 Edition 2.0 (2005-01-11) Corrigendum 1 - Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test
IEC 61086-3-1:2004 Edition 2.0 (2004-02-09) Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)
IEC 61126:1992 Edition 1.0 (1992-03-15) Procedure for use in the preparation of maximum lamp outlines
IEC 61126:1992/AMD1:1996 Edition 1.0 (1996-10-25) Amendment 1 - Procedure for use in the preparation of maximum lamp outlines
IEC 61126:1992/AMD2:2005 Edition 1.0 (2005-08-30) Amendment 2 - Procedure for use in the preparation of maximum lamp outlines
IEC TR 61127:1992 Edition 1.0 (1992-03-15) High pressure xenon short arc lamps - Dimensional, electrical and photometric data and cap types
IEC 61167:2018 Edition 4.0 (2018-04-27) Metal halide lamps - Performance specification
IEC 61167:2018/COR1:2019 Edition 4.0 (2019-04-04) Corrigendum 1 - Metal halide lamps - Performance specification
IEC 61167:2018/AMD1:2018 Edition 4.0 (2018-10-23) Amendment 1 - Metal halide lamps - Performance specification
IEC 61184:2017 Edition 4.0 (2017-05-22) Bayonet lampholders
IEC 61184:2017/AMD1:2019 Edition 4.0 (2019-12-11) Amendment 1 - Bayonet lampholders
IEC 61195:1999 Edition 2.0 (1999-10-29) Double-capped fluorescent lamps - Safety specifications
IEC 61195:1999/COR1:2000 Edition 2.0 (2000-08-30) Corrigendum 1 - Double-capped fluorescent lamps - Safety specifications
IEC 61195:1999/AMD1:2012 Edition 2.0 (2012-10-12) Amendment 1 - Double-capped fluorescent lamps - Safety specifications
IEC 61195:1999/AMD2:2014 Edition 2.0 (2014-09-19) Amendment 2 - Double-capped fluorescent lamps - Safety specifications
IEC 61199:2011 Edition 3.0 (2011-07-11) Single-capped fluorescent lamps - Safety specifications
IEC 61199:2011/AMD1:2012 Edition 3.0 (2012-09-27) Amendment 1 - Single-capped fluorescent lamps - Safety specifications
IEC 61199:2011/AMD2:2014 Edition 3.0 (2014-07-30) Amendment 2 - Single-capped fluorescent lamps - Safety specifications
IEC 61204:1993+AMD1:2001 CSV Edition 1.1 (2001-05-08) Low-voltage power supply devices, d.c. output - Performance characteristics
IEC 61204:1993 Edition 1.0 (1993-02-15) Low-voltage power supply devices, d.c. output - Performance characteristics
IEC 61204:1993/AMD1:2001 Edition 1.0 (2001-01-19) Amendment 1 - Low-voltage power supply devices, d.c. output - Performance characteristics
IEC 61204-3:2016 Edition 3.0 (2016-10-28) Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC)
IEC 61204-6:2000 Edition 1.0 (2000-11-15) Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance
IEC 61204-7:2016 Edition 2.0 (2016-11-07) Low-voltage switch mode power supplies - Part 7: Safety requirements
IEC 61212-1:2006 Edition 2.0 (2006-03-08) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
IEC 61212-1:2006/COR1:2014 Edition 2.0 (2014-03-19) Corrigendum 1 - Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
IEC 61212-2:2006 Edition 2.0 (2006-04-10) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 61212-3-1:2013 Edition 3.0 (2013-04-29) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
IEC 61212-3-2:2013 Edition 3.0 (2013-04-29) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
IEC 61212-3-3:2006 Edition 2.0 (2006-08-15) Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
IEC 61231:2010 Edition 1.0 (2010-01-14) International lamp coding system (ILCOS)
IEC 61231:2010/AMD1:2013 Edition 1.0 (2013-06-27) Amendment 1 - International lamp coding system (ILCOS)
IEC 61280-1-1:2013 Edition 2.0 (2013-05-21) Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
IEC 61280-1-3:2021 Edition 3.0 (2021-07-05) Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Measurement of central wavelength, spectral width and additional spectral characteristics
IEC 61280-1-4:2009 Edition 2.0 (2009-11-20) Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
IEC 61280-2-1:2010 Edition 2.0 (2010-03-18) Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement
IEC 61280-2-2:2012 Edition 4.0 (2012-10-25) Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
IEC 61280-2-2:2012/COR1:2015 Edition 4.0 (2015-02-17) Corrigendum 1 - Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement
IEC 61280-2-3:2009 Edition 1.0 (2009-07-14) Fibre optic communication subsystem tets procedures - Part 2-3: Digital systems - Jitter and wander measurements
IEC 61280-2-8:2021 Edition 2.0 (2021-03-02) Fibre optic communication subsystem test procedures - Part 2-8: Digital systems - Determination of low BER using Q-factor measurements
IEC 61280-2-9:2009 Edition 2.0 (2009-02-11) Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
IEC 61280-2-10:2005 Edition 1.0 (2005-07-21) Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters
IEC 61280-2-11:2006 Edition 1.0 (2006-01-17) Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
IEC 61280-2-12:2014 Edition 1.0 (2014-05-06) Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment
IEC 61280-4-1:2019 Edition 3.0 (2019-05-22) Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
IEC 61280-4-1:2019/COR1:2020 Edition 3.0 (2020-04-22) Corrigendum 1 - Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
IEC 61280-4-1:2019/AMD1:2021 Edition 3.0 (2021-12-09) Amendment 1 - Fibre-optic communication subsystem test procedures - Part 4-1: Installed cabling plant - Multimode attenuation measurement
IEC 61280-4-2:2014 Edition 2.0 (2014-06-27) Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement
IEC 61280-4-4:2017 Edition 2.0 (2017-03-07) Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links
IEC 61280-4-5:2020 Edition 1.0 (2020-07-22) Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces
IEC 61280-4-5:2020/COR1:2022 Edition 1.0 (2022-01-19) Corrigendum 1 - Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces
IEC 61281-1:2017 Edition 2.0 (2017-12-15) Fibre optic communication subsystems - Part 1: Generic specification
IEC TR 61282-3:2006 Edition 2.0 (2006-10-25) Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion
IEC TR 61282-4:2013 Edition 2.0 (2013-11-19) Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects
IEC TR 61282-5:2019 Edition 2.0 (2019-07-17) Fibre optic communication system design guidelines - Part 5: Accommodation and compensation of chromatic dispersion
IEC TR 61282-6:2003 Edition 1.0 (2003-01-28) Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems
IEC TR 61282-7:2003 Edition 1.0 (2003-01-21) Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion
IEC TR 61282-8:2006 Edition 1.0 (2006-11-15) Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data
IEC TR 61282-9:2016 Edition 2.0 (2016-03-24) Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory
IEC TR 61282-10:2013 Edition 1.0 (2013-01-10) Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
IEC TR 61282-10:2013/COR1:2013 Edition 1.0 (2013-04-29) Corrigendum 1 - Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude
IEC TR 61282-12:2016 Edition 1.0 (2016-02-10) Fibre optic communication system design guides - Part 12: In-band optical signal-to-noise ratio (OSNR)
IEC TR 61282-13:2014 Edition 1.0 (2014-05-06) Fibre optic communication system design guides - Part 13: Guidance on in-service PMD and CD characterization of fibre optic links
IEC TR 61282-14:2019 Edition 2.0 (2019-07-19) Fibre optic communication system design guidelines - Part 14: Determination of the uncertainties of attenuation measurements in fibre plants
IEC TR 61282-15:2017 Edition 1.0 (2017-05-04) Fibre optic communication system design guides - Part 15: Cable plant and link - Testing multi-fibre optic cable plant terminated with MPO connectors
IEC 61290-1:2022 Edition 2.0 (2022-06-07) Optical amplifiers - Test methods - Part 1: Power and gain parameters
IEC 61290-1-1:2020 Edition 4.0 (2020-09-03) Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
IEC 61290-1-2:2005 Edition 2.0 (2005-11-04) Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
IEC 61290-1-3:2021 Edition 4.0 (2021-03-01) Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
IEC 61290-3:2008 Edition 2.0 (2008-08-13) Optical amplifiers - Test methods - Part 3: Noise figure parameters
IEC 61290-3-1:2003 Edition 1.0 (2003-08-26) Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method
IEC 61290-3-2:2008 Edition 2.0 (2008-07-21) Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method
IEC 61290-3-3:2013 Edition 1.0 (2013-11-07) Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio
IEC 61290-4-1:2016 Edition 2.0 (2016-09-26) Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-2:2011 Edition 1.0 (2011-07-13) Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method
IEC 61290-4-3:2018 Edition 2.0 (2018-04-27) Optical amplifiers - Test methods - Part 4-3: Power transient parameters - Single channel optical amplifiers in output power control
IEC 61290-4-4:2018 Edition 1.0 (2018-05-29) Optical amplifiers - Test methods - Part 4-4: Gain transient parameters - Single channel optical amplifiers with gain control
IEC 61290-5-1:2006 Edition 2.0 (2006-05-29) Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
IEC 61290-5-2:2003 Edition 1.0 (2003-10-03) Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method
IEC 61290-5-3:2002 Edition 1.0 (2002-03-05) Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer
IEC 61290-6-1:1998 Edition 1.0 (1998-06-11) Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer
IEC 61290-7-1:2007 Edition 2.0 (2007-04-11) Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method
IEC 61290-10-1:2009 Edition 2.0 (2009-03-10) Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
IEC 61290-10-2:2007 Edition 2.0 (2007-09-18) Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
IEC 61290-10-3:2002 Edition 1.0 (2002-12-13) Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods
IEC 61290-10-4:2007 Edition 1.0 (2007-05-23) Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
IEC 61290-10-5:2014 Edition 1.0 (2014-05-23) Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure
IEC 61290-11-1:2008 Edition 2.0 (2008-04-29) Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)
IEC 61290-11-2:2005 Edition 1.0 (2005-03-23) Optical amplifiers - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method
IEC 61291-1:2018 Edition 4.0 (2018-02-20) Optical amplifiers - Part 1: Generic specification
IEC 61291-2:2016 Edition 4.0 (2016-02-18) Optical amplifiers - Part 2: Single channel applications - Performance specification template
IEC 61291-4:2011 Edition 3.0 (2011-11-24) Optical amplifiers - Part 4: Multichannel applications - Performance specification template
IEC 61291-5-2:2017 Edition 2.0 (2017-01-25) Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
IEC 61291-5-2:2017/COR1:2019 Edition 2.0 (2019-05-24) Corrigendum 1 - Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
IEC 61291-6-1:2008 Edition 1.0 (2008-08-13) Optical amplifiers - Part 6-1: Interfaces - Command set
IEC TR 61292-1:2022 Edition 3.0 (2022-05-11) Optical amplifiers - Part 1: Parameters of optical fibre amplifier components
IEC TR 61292-2:2003 Edition 1.0 (2003-01-20) Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer
IEC TR 61292-3:2020 Edition 2.0 (2020-03-25) Optical amplifiers - Part 3: Classification, characteristics and applications
IEC TR 61292-4:2014 Edition 3.0 (2014-10-29) Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers
IEC TR 61292-5:2004 Edition 1.0 (2004-07-26) Optical amplifiers - Part 5: Polarization mode dispersion parameter - General information
IEC TR 61292-6:2010 Edition 1.0 (2010-02-24) Optical amplifiers - Part 6: Distributed Raman amplification
IEC TR 61292-7:2011 Edition 1.0 (2011-11-24) Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers
IEC TR 61292-8:2019 Edition 1.0 (2019-01-16) Optical amplifiers - Part 8: High-power amplifiers
IEC TR 61292-9:2017 Edition 2.0 (2017-12-13) Optical amplifiers - Part 9: Semiconductor optical amplifiers (SOAs)
IEC TR 61341:2010 Edition 2.0 (2010-02-18) Method of measurement of centre beam intensity and beam angle(s) of reflector lamps
IEC 61347-1:2015 Edition 3.0 (2015-02-19) Lamp controlgear - Part 1: General and safety requirements
IEC 61347-1:2015/AMD1:2017 Edition 3.0 (2017-09-29) Amendment 1 - Lamp controlgear - Part 1: General and safety requirements
IEC 61347-2-1:2000+AMD1:2005 CSV Edition 1.1 (2006-01-25) Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
IEC 61347-2-1:2000 Edition 1.0 (2000-10-13) Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
IEC 61347-2-1:2000/AMD1:2005 Edition 1.0 (2005-11-23) Amendment 1 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
IEC 61347-2-1:2000/AMD2:2013 Edition 1.0 (2013-09-25) Amendment 2 - Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)
IEC 61347-2-2:2011 Edition 2.0 (2011-12-07) Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps
IEC 61347-2-3:2011 Edition 2.0 (2011-05-19) Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 61347-2-3:2011/COR1:2011 Edition 2.0 (2011-09-22) Corrigendum 1 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 61347-2-3:2011/AMD1:2016 Edition 2.0 (2016-07-15) Amendment 1 - Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps
IEC 61347-2-7:2011 Edition 3.0 (2011-12-07) Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
IEC 61347-2-7:2011/AMD1:2017 Edition 3.0 (2017-10-13) Amendment 1 - Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)
IEC 61347-2-8:2000+AMD1:2006 CSV Edition 1.1 (2006-03-14) Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-8:2000 Edition 1.0 (2000-10-13) Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-8:2000/AMD1:2006 Edition 1.0 (2006-01-23) Amendment 1 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-8:2000/AMD1:2006/COR1:2012 Edition 1.0 (2012-08-15) Corrigendum 1 - Amendment 1 - Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
IEC 61347-2-9:2012 Edition 2.0 (2012-10-30) Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-10:2000+AMD1:2008 CSV Edition 1.1 (2009-01-28) Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
IEC 61347-2-10:2000 Edition 1.0 (2000-10-13) Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
IEC 61347-2-10:2000/AMD1:2008 Edition 1.0 (2008-11-26) Amendment 1 - Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
IEC 61347-2-11:2001 Edition 1.0 (2001-04-26) Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
IEC 61347-2-11:2001/COR1:2001 Edition 1.0 (2001-12-14) Corrigendum 1 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
IEC 61347-2-11:2001/AMD1:2017 Edition 1.0 (2017-07-13) Amendment 1 - Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
IEC 61347-2-12:2005+AMD1:2010 CSV Edition 1.1 (2010-11-18) Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-12:2005 Edition 1.0 (2005-06-10) Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-12:2005/AMD1:2010 Edition 1.0 (2010-09-29) Amendment 1 - Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-13:2014 Edition 2.0 (2014-09-03) Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
IEC 61347-2-13:2014/AMD1:2016 Edition 2.0 (2016-07-20) Amendment 1 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
IEC 61347-2-14:2018 Edition 1.0 (2018-02-27) Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
IEC 61540:1997 Edition 1.0 (1997-08-26) Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 61540:1997/AMD1:1998 Edition 1.0 (1998-11-30) Amendment 1 - Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
IEC 61543:1995 Edition 1.0 (1995-04-13) Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61543:1995/AMD1:2004 Edition 1.0 (2004-08-27) Amendment 1 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61543:1995/AMD2:2005 Edition 1.0 (2005-11-23) Amendment 2 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
IEC 61547:2020 Edition 3.0 (2020-03-26) Equipment for general lighting purposes - EMC immunity requirements
IEC TR 61547-1:2020 Edition 3.0 (2020-07-01) Equipment for general lighting purposes - EMC immunity requirements - Part 1: Objective light flickermeter and voltage fluctuation immunity test method
IEC 61549:2003+AMD1:2005 CSV Edition 2.1 (2005-04-25) Miscellaneous lamps
IEC 61549:2003 Edition 2.0 (2003-05-13) Miscellaneous lamps
IEC 61549:2003/AMD1:2005 Edition 2.0 (2005-03-17) Amendment 1 - Miscellaneous lamps
IEC 61549:2003/AMD2:2010 Edition 2.0 (2010-02-18) Amendment 2 - Miscellaneous lamps
IEC 61549:2003/AMD3:2012 Edition 2.0 (2012-07-05) Amendment 3 - Miscellaneous lamps
IEC 61628-1:1997 Edition 1.0 (1997-11-07) Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements
IEC 61628-2:1998+AMD1:2007 CSV Edition 1.1 (2007-07-30) Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
IEC 61628-2:1998 Edition 1.0 (1998-11-06) Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
IEC 61628-2:1998/AMD1:2007 Edition 1.0 (2007-06-06) Amendment 1 - Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test
IEC 61629-1:1996 Edition 1.0 (1996-11-19) Aramid pressboard for electrical purposes - Part 1: Definitions, designations and general requirements
IEC 61629-2:1996 Edition 1.0 (1996-11-14) Aramid pressboard for electrical purposes - Part 2: Methods of test
IEC 61757:2018 Edition 1.0 (2018-01-25) Fibre optic sensors - Generic specification
IEC 61757-1-1:2020 Edition 2.0 (2020-03-27) Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
IEC 61757-2-1:2021 Edition 1.0 (2021-07-28) Fibre optic sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings
IEC 61757-2-2:2016 Edition 1.0 (2016-05-12) Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing
IEC 61757-3-2:2022 Edition 1.0 (2022-03-29) Fibre optic sensors - Part 3-2: Acoustic sensing and vibration measurement - Distributed sensing
IEC 61757-4-3:2020 Edition 1.0 (2020-07-30) Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method
IEC 61757-4-3:2020/COR1:2022 Edition 1.0 (2022-06-03) Corrigendum 1 - Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method
IEC 61757-5-1:2021 Edition 1.0 (2021-07-07) Fibre optic sensors - Part 5-1: Tilt measurement - Tilt sensors based on fibre Bragg gratings
IEC 61770:2008 Edition 2.0 (2008-07-23) Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
IEC 61770:2008/AMD1:2015 Edition 2.0 (2015-10-13) Amendment 1 - Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
IEC 61800-5-1:2007 Edition 2.0 (2007-07-16) Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
IEC 61800-5-1:2007/AMD1:2016 Edition 2.0 (2016-08-31) Amendment 1 - Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
IEC 61800-5-2:2016 Edition 2.0 (2016-04-18) Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
IEC 61800-9-1:2017 Edition 1.0 (2017-03-03) Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM)
IEC 61800-9-2:2017 Edition 1.0 (2017-03-03) Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters
IEC 62007-1:2015 Edition 3.0 (2015-03-30) Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
IEC 62007-2:2009 Edition 2.0 (2009-01-26) Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
IEC 62011-1:2002 Edition 1.0 (2002-05-23) Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements
IEC 62011-2:2004 Edition 1.0 (2004-01-08) Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test
IEC 62011-3-1:2003 Edition 1.0 (2003-08-21) Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section
IEC 62019:1999 Edition 1.0 (1999-02-26) Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
IEC 62019:1999/AMD1:2002 Edition 1.0 (2002-11-28) Amendment 1 - Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units
IEC 62020-1:2020 Edition 1.0 (2020-04-21) Electrical accessories - Residual current monitors (RCMs) - Part 1: RCMs for household and similar uses
IEC 62020-1:2020/COR1:2020 Edition 1.0 (2020-07-10) Corrigendum 1 - Electrical accessories - Residual current monitors (RCMs) - Part 1: RCMs for household and similar uses
IEC 62031:2018 Edition 2.0 (2018-03-08) LED modules for general lighting - Safety specifications
IEC TS 62033:2000 Edition 1.0 (2000-03-30) Attenuation uniformity in optical fibres
IEC 62034:2012 Edition 2.0 (2012-02-22) Automatic test systems for battery powered emergency escape lighting
IEC 62035:2014 Edition 2.0 (2014-04-10) Discharge lamps (excluding flourescent lamps) - Safety specifications
IEC 62035:2014/AMD1:2016 Edition 2.0 (2016-11-24) Amendment 1 - Discharge lamps (excluding fluorescent lamps) - Safety specifications
IEC TR 62048:2014 Edition 3.0 (2014-01-22) Optical fibres - Reliability - Power law theory
IEC 62115:2017 Edition 2.0 (2017-04-11) Electric toys - Safety
IEC 62115:2017/COR1:2019 Edition 2.0 (2019-08-27) Corrigendum 1 - Electric toys - Safety
IEC 62148-1:2017 Edition 2.0 (2017-08-31) Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance
IEC 62148-2:2010 Edition 2.0 (2010-12-15) Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers
IEC 62148-3:2010 Edition 2.0 (2010-11-25) Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers
IEC 62148-5:2003 Edition 1.0 (2003-02-10) Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic modules
IEC 62148-6:2020 Edition 2.0 (2020-02-25) Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
IEC 62148-11:2009 Edition 2.0 (2009-06-25) Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules
IEC 62148-12:2004 Edition 1.0 (2004-02-09) Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector
IEC 62148-15:2021 Edition 3.0 (2021-03-30) Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages
IEC 62148-16:2009 Edition 1.0 (2009-08-06) Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver components for use with LC connector interface
IEC 62148-17:2013 Edition 1.0 (2013-09-25) Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
IEC 62148-18:2014 Edition 1.0 (2014-11-25) Fiber optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface
IEC 62148-19:2019 Edition 1.0 (2019-05-02) Fibre optic active components and devices - Package and interface standards - Part 19: Photonic chip scale package
IEC 62148-21:2021 Edition 2.0 (2021-04-22) Fibre optic active components and devices - Package and interface standards - Part 21: Design guidelines of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon fine-pitch land grid array (S-FLGA)
IEC 62149-1:2011 Edition 2.0 (2011-12-07) Fibre optic active components and devices - Performance standards - Part 1: General and guidance
IEC 62149-2:2014 Edition 2.0 (2014-05-26) Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices
IEC 62149-3:2020 Edition 3.0 (2020-07-07) Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
IEC 62149-3:2020/COR1:2021 Edition 3.0 (2021-02-18) Corrigendum 1 - Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems
IEC 62149-4:2010 Edition 2.0 (2010-04-29) Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
IEC 62149-5:2020 Edition 3.0 (2020-08-18) Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
IEC 62149-7:2012 Edition 1.0 (2012-03-29) Fibre optic active components and devices - Performance standards - Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices
IEC 62149-8:2014 Edition 1.0 (2014-04-24) Fibre optic active components and devices - Performance standards - Part 8: Seeded reflective semiconductor optical amplifier devices
IEC 62149-9:2014 Edition 1.0 (2014-04-24) Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers
IEC 62149-10:2018 Edition 1.0 (2018-11-07) Fibre optic active components and devices - Performance standards - Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul
IEC 62149-11:2020 Edition 1.0 (2020-04-28) Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface
IEC 62150-1:2005 Edition 1.0 (2005-04-27) Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance
IEC 62150-2:2010 Edition 2.0 (2010-12-09) Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers
IEC 62150-3:2015 Edition 2.0 (2015-05-07) Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces
IEC 62150-4:2009 Edition 1.0 (2009-11-20) Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system
IEC 62150-5:2017 Edition 1.0 (2017-05-11) Fibre optic active components and devices - Test and measurement procedures - Part 5: Wavelength channel tuning time of tuneable transmitters
IEC 62150-6:2022 Edition 1.0 (2022-01-28) Fibre optic active components and devices - Test and measurement procedures - Part 6: Universal mezzanine boards for test and measurement of photonic devices
IEC TR 62221:2012 Edition 2.0 (2012-12-12) Optical fibres - Measurement methods - Microbending sensitivity
IEC TR 62283:2010 Edition 2.0 (2010-06-28) Optical fibres - Guidance for nuclear radiation tests
IEC TR 62284:2003 Edition 1.0 (2003-01-21) Effective area measurements of single-mode optical fibres - Guidance
IEC TR 62285:2005 Edition 2.0 (2005-05-30) Application guide for non-linear coefficient measuring methods
IEC TR 62316:2017 Edition 3.0 (2017-07-12) Guidance for the interpretation of OTDR backscattering traces for single-mode fibres
IEC TR 62324:2007 Edition 2.0 (2007-01-29) Single-mode optical fibres - Raman gain efficiency measurement using continuous wave method - Guidance
IEC 62329-1:2005 Edition 1.0 (2005-11-21) Heat shrinkable moulded shapes - Part 1: Definitions and general requirements
IEC 62329-2:2006 Edition 1.0 (2006-07-10) Heat-shrinkable moulded shapes - Part 2: Methods of test
IEC 62329-3-100:2010 Edition 1.0 (2010-06-16) Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions
IEC 62329-3-101:2010 Edition 1.0 (2010-06-16) Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
IEC 62329-3-102:2010 Edition 1.0 (2010-06-16) Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
IEC 62335:2008 Edition 1.0 (2008-07-08) Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications
IEC 62343:2017 Edition 2.0 (2017-05-23) Dynamic modules - General and guidance
IEC 62343-1:2019 Edition 2.0 (2019-02-06) Dynamic modules - Part 1: Performance standards - General conditions
IEC 62343-1-2:2015 Edition 2.0 (2015-06-25) Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized)
IEC 62343-1-3:2012 Edition 2.0 (2012-12-05) Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)
IEC 62343-2-1:2019 Edition 1.0 (2019-09-16) Dynamic modules - Part 2-1: Reliability qualification - Test template
IEC 62343-3-1:2016 Edition 2.0 (2016-04-21) Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers
IEC 62343-3-2:2016 Edition 1.0 (2016-05-12) Dynamic modules - Part 3-2: Performance specification templates - Optical channel monitor
IEC 62343-3-3:2020 Edition 2.0 (2020-04-09) Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
IEC 62343-3-4:2018 Edition 1.0 (2018-04-27) Dynamic modules - Part 3-4: Performance specification templates - Multicast optical switches
IEC 62343-4-1:2016 Edition 1.0 (2016-03-04) Dynamic modules - Part 4-1: Software and hardware interface - 1 x 9 wavelength selective switch
IEC 62343-5-1:2014 Edition 2.0 (2014-11-25) Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement
IEC 62343-5-2:2018 Edition 1.0 (2018-01-15) Dynamic modules - Part 5-2: Test methods - 1 x N fixed-grid WSS - Dynamic crosstalk measurement
IEC TR 62343-6-1:2011 Edition 1.0 (2011-02-17) Dynamic modules - Part 6-1: Dynamic channel equalizers
IEC TR 62343-6-2:2013 Edition 2.0 (2013-08-06) Dynamic modules - Part 6-2: Design guide - Software and hardware interfaces - Survey results
IEC TR 62343-6-3:2010 Edition 1.0 (2010-05-31) Dynamic modules - Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators
IEC TR 62343-6-4:2017 Edition 1.0 (2017-01-27) Dynamic modules - Part 6-4: Design guides - Reconfigurable optical add/drop multiplexer
IEC TR 62343-6-5:2014 Edition 2.0 (2014-06-19) Dynamic modules - Part 6-5: Design guide - Investigation of operating mechanical shock and vibration tests for dynamic modules
IEC TR 62343-6-6:2017 Edition 2.0 (2017-01-06) Dynamic modules - Part 6-6: Design guide - Failure mode effect analysis for optical units of dynamic modules
IEC TR 62343-6-7:2015 Edition 1.0 (2015-02-17) Dynamic modules - Part 6-7: Design guide - Optical channel monitor
IEC TR 62343-6-8:2011 Edition 1.0 (2011-11-07) Dynamic modules - Part 6-8: Categorization study of dynamic performance requirements
IEC TR 62343-6-9:2015 Edition 1.0 (2015-06-25) Dynamic modules - Part 6-9: Design guide - Study of mechanisms and measurements of crosstalk in wavelength-selective switches
IEC TR 62343-6-10:2017 Edition 1.0 (2017-03-22) Dynamic modules - Part 6-10: Design guide - Intermediate controller for multiple dynamic module systems
IEC TR 62343-6-11:2019 Edition 1.0 (2019-11-13) Dynamic Modules - Part 6-11: Design guidelines - Software and hardware interface for optical multicast switches
IEC TR 62350:2006 Edition 1.0 (2006-12-14) Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use
IEC TR 62362:2020 Edition 2.0 (2020-09-14) Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance

SDG 5 - Gender equality

More opportunities

IEC for SDGs

Diversity statement

Philippe Metzger - IGC International Gender Champion

Women in standards

Women at IEC

IEC work addresses topics related to gender equality

IEC work directly impacts the following SDG targets

5.2 Eliminate all forms of violence against women and girls in public and private spheres

Click here to see the example

5.5 Ensure women’s full and effective participation and equal opportunities

Click here to see the example

5.B Enhance the use of enabling technology, in particular information and communication technology, to promote the empowerment of women

Click here to see the example