SDG 3 - Good health and well being

Ensure healthy lives and promote well-being for all

Safe medical devices

Access to quality healthcare is an essential human right. IEC work in standardization provides the technical foundation for all essential medical devices used in disease prevention, diagnostics and treatment. The members of IECEE verify and certify that medical devices are safe and work as expected.

26 IEC TC/SCs, 2 IEC SyCs and 2 IEC CA Systems contribute to SDG 3.

iec_for_sdgs-cover.jpg

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

IEC work addresses topics related to healthcare and well-being, as well as the safety of healthcare workers

Medical devices

Medical devices

Alarm systems

Alarm systems

Laser safety

Laser safety

Cyber security

Cyber security

Cooling

Cooling

Lighting

Lighting

Laboratory equipment

Laboratory equipment

Diagnostic imaging

Diagnostic imaging

Infra- and ultrasound

Infra- and ultrasound

Overall electrical safety

Overall electrical safety

Emergency medical services

Emergency medical services

Radiotherapy

Radiotherapy

Functional safety

Functional safety

IEC work directly impacts the following SDG targets

3.1 Reduce global maternal mortality ratio

IEC work covers lighting and medical equipment used in maternity wards. A woman giving birth in an electrified health clinic is less likely to die in childbirth. Electricity also ensures that a baby’s first breath is of fresh air, not candles or kerosene fumes.

  • IEC TC 29: Electroacoustics;
  • IEC SC 34D: Luminaires;
  • IEC TC 62 and 4 SCs: Medical equipment for diagnosis and treatment, IEC 60601 series of standards, which covers safety, performance and other aspects of devices such as electronic fever thermometers, incubators, lamps for operating rooms, ultrasound, X-ray, laser treatments, critical care equipment, artificial respiration, laboratory equipment, and many more;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC TC 76: Optical radiation safety and laser equipment;
  • IEC TC 79: Alarm and electronic security systems;
  • IEC TC 106: Methods for the assessment of electric, magnetic and electromagnetic fields associated with human exposure; IEC SyC Smart cities: Electrotechnical aspects of smart cities; IECEE (IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components).

3.2 End preventable deaths of children under 5 years of age, reduce neonatal mortality

A child born in an electrified health clinic is less likely to die because of prolonged labour, asphyxia, or preterm birth complications. Prenatal maternal care such as ultrasound can help identify risks for mother or child. Emergency medical services can help reduce mortality rates. The replacement of kerosene with solar lighting helps reduce respiratory diseases and burn accidents among young children. Refrigeration of baby and infant food reduces mortality rates through diarrhoea. All relevant technologies are covered by IEC work.

  • IEC TC 29: Electroacoustics;
  • IEC SC 34D: Luminaires;
  • IEC TC 62 and 4 SCs: Medical equipment for diagnosis and treatment - IEC 60601 series of standards for safety, performance and other aspects of devices such as electronic fever thermometers, incubators, lamps for operating rooms, ultrasound, X-ray, laser treatments, critical care equipment, artificial respiration, laboratory equipment, and many more;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC TC 76: Optical radiation safety and laser equipment;
  • IEC TC 79: Alarm and electronic security systems;
  • IEC TC 106: Methods for the assessment of electric, magnetic and electromagnetic fields associated with human exposure;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities;
  • IECEE (IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components).

3.4 Reduce premature mortality from non-communicable diseases through prevention and treatment

Ambient and household air pollution and related cardiovascular and respiratory diseases are responsible for a high number of deaths in developing countries. They directly result from the use of polluting fuels for lighting and cooking. IEC work facilitates access to clean off-grid electricity and solar lighting.

  • IEC SC 34D: Luminaires;
  • IEC TC 62 and 4 SCs: Medical equipment for diagnosis and treatment, IEC 60601 series of standards for safety, performance, and other aspects of devices such as electronic fever thermometers, incubators, lamps for operating rooms, ultrasound, X-ray, laser treatments, critical care equipment, artificial respiration, laboratory equipment, and many more;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC SyC Smart cities: Electrotechnical aspects of smart cities.

3.8 Achieve access to quality essential health-care services and access to safe, effective, quality and affordable essential medicines and vaccines for all

Immunization saves millions of lives and is widely recognized as one of the world’s most successful and cost-effective health interventions. Vaccines are fragile. They must be kept cold and deteriorate rapidly after they are removed from storage. IEC work contributes to the safe manufacturing and proper cooling of vaccines. IEC work also underpins the safety and reliability of essential medical devices used in diagnosis and treatment.

  • IEC TC 29: Electroacoustics;
  • IEC TC 44: Safety of machinery - Electrotechnical aspects;
  • IEC TC 56: Dependability;
  • IEC TC 59/WG 11: Accessibility and usability of household and similar electrical appliances;
  • IEC SC 59M: Refrigeration appliances for household or commercial use;
  • IEC TC 61: Safety of household and similar electrical appliances including IEC SC 61C: Safety of refrigeration appliances for household and commercial use;
  • IEC TC 62 and 4 SCs: Medical equipment for diagnosis and treatment, IEC 60601 series of standards for safety, performance and other aspects of devices such as electronic fever thermometers, incubators, lamps for operating rooms, ultrasound, X-ray, laser treatments, critical care equipment, artificial respiration, laboratory equipment, and many more;
  • IEC TC 66: Safety of measuring, control and laboratory equipment;
  • IEC TC 76: Optical radiation safety and laser equipment;
  • IEC TC 79: Alarm and electronic security systems;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 100/TA 16: Active assisted living (AAL), wearable electronic devices and technologies, accessibility and user interfaces;
  • IEC TC 106: Methods for the assessment of electric, magnetic and electromagnetic fields associated with human exposure;
  • IEC TC 108: Safety of electronic equipment within the field of audio/video, information technology and communication technology;
  • IEC TC 116: Safety of motor-operated electric tools;
  • IEC SyC AAL: Active assisted living;
  • ISO/IEC JTC 1: Information technology;
  • IECEE (IEC System of Conformity Assessment for Electrotechnical Equipment and Components).

3.9 Reduce the number of deaths and illnesses from hazardous chemicals

The IEC publishes standards and guides that help reduce the use of hazardous chemicals in manufacturing and improve waste management and end-of-life recycling.

  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IECQ (IEC Quality Assessment System for Electronic Components) - hazardous substances.

 

Anchor placeholder #data
  • Publications
  • Projects

Reference

Language

TC/SC

CISPR 16-1-1:2019
Edition 5.0 (2019-05-22)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

CISPR 16-1-2:2014
Edition 2.0 (2014-03-21)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

CISPR 16-1-2:2014/AMD1:2017
Edition 2.0 (2017-11-07)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements

CISPR 16-1-3:2004
Edition 2.0 (2004-06-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-3:2004/COR1:2006
Edition 2.0 (2006-02-09)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-3:2004/AMD1:2016
Edition 2.0 (2016-03-31)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-3:2004/AMD2:2020
Edition 2.0 (2020-01-28)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-4:2019
Edition 4.0 (2019-01-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-4:2019/AMD1:2020
Edition 4.0 (2020-06-15)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-5:2014
Edition 2.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-5:2014/COR1:2020
Edition 2.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-5:2014/AMD1:2016
Edition 2.0 (2016-12-16)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz

CISPR 16-1-6:2014
Edition 1.0 (2014-12-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-1-6:2014/AMD1:2017
Edition 1.0 (2017-01-13)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-1-6:2014/AMD2:2022
Edition 1.0 (2022-03-03)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring apparatus - EMC antenna calibration

CISPR 16-2-1:2014
Edition 3.0 (2014-02-26)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-1:2014/COR1:2020
Edition 3.0 (2020-08-31)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-1:2014/AMD1:2017
Edition 3.0 (2017-06-30)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-2:2010
Edition 2.0 (2010-07-28)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

CISPR 16-2-3:2016
Edition 4.0 (2016-09-15)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-3:2016/AMD1:2019
Edition 4.0 (2019-06-25)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-4:2003
Edition 1.0 (2003-11-20)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

CISPR TR 16-4-1:2009
Edition 2.0 (2009-02-23)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

CISPR 16-4-2:2011
Edition 2.0 (2011-06-08)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR 16-4-2:2011/COR1:2013
Edition 2.0 (2013-04-11)
Corrigendum 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrument uncertainty

CISPR 16-4-2:2011/AMD1:2014
Edition 2.0 (2014-02-14)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR 16-4-2:2011/AMD2:2018
Edition 2.0 (2018-08-15)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR 16-4-2:2011/AMD2:2018/COR1:2019
Edition 2.0 (2019-01-16)
Corrigendum 1 - Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty

CISPR TR 16-4-3:2004+AMD1:2006 CSV
Edition 2.1 (2007-01-18)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR TR 16-4-3:2004
Edition 2.0 (2004-05-17)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR TR 16-4-3:2004/AMD1:2006
Edition 2.0 (2006-10-17)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR TR 16-4-5:2006
Edition 1.0 (2006-10-25)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

CISPR TR 16-4-5:2006/AMD1:2014
Edition 1.0 (2014-07-21)
Amendment 1 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

CISPR TR 16-4-5:2006/AMD2:2021
Edition 1.0 (2021-10-29)
Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods

CISPR 17:2011
Edition 2.0 (2011-06-10)
Methods of measurement of the suppression characteristics of passive EMC filtering devices

IEC 60034-27-3:2015
Edition 1.0 (2015-12-16)
Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

IEC 60034-27-4:2018
Edition 1.0 (2018-01-24)
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

IEC 60034-28:2012
Edition 2.0 (2012-12-13)
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

IEC 60034-29:2008
Edition 1.0 (2008-03-11)
Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

IEC 60034-30-1:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

IEC TS 60034-30-2:2016
Edition 1.0 (2016-12-08)
Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)

IEC TS 60034-32:2016
Edition 1.0 (2016-12-15)
Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings

IEC 60061-1:2005 CSV
Edition 3.4 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control ofinterchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD21:1998
Edition 3.0 (1998-03-16)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD22:1999
Edition 3.0 (1999-02-23)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD23:1999
Edition 3.0 (1999-07-29)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD24:2000
Edition 3.0 (2000-05-18)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD26:2001
Edition 3.0 (2001-02-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD27:2001
Edition 3.0 (2001-10-26)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD28:2002
Edition 3.0 (2002-05-03)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD29:2002
Edition 3.0 (2002-05-13)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1:1969/AMD30:2002
Edition 3.0 (2002-10-29)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD31:2003
Edition 3.0 (2003-05-15)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD32:2003
Edition 3.0 (2003-09-03)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD33:2003
Edition 3.0 (2003-10-30)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD34:2004
Edition 3.0 (2004-07-26)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD35:2004
Edition 3.0 (2004-11-25)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD36:2005
Edition 3.0 (2005-10-03)
Amendment 36 to IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD37:2006
Edition 3.0 (2006-05-30)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD38:2006
Edition 3.0 (2006-12-14)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD39:2007
Edition 3.0 (2007-04-30)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD40:2008
Edition 3.0 (2008-07-18)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD41:2009
Edition 3.0 (2009-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD42:2009
Edition 3.0 (2009-07-24)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD43:2010
Edition 3.0 (2010-02-22)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD44:2010
Edition 3.0 (2010-04-29)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD45:2011
Edition 3.0 (2011-06-30)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD46:2011
Edition 3.0 (2011-06-30)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD47:2011
Edition 3.0 (2011-11-28)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD48:2012
Edition 3.0 (2012-09-27)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD49:2013
Edition 3.0 (2013-02-26)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD50:2014
Edition 3.0 (2014-02-19)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD51:2014
Edition 3.0 (2014-12-11)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD52:2015
Edition 3.0 (2015-07-24)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD53:2015
Edition 3.0 (2015-08-21)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD54:2016
Edition 3.0 (2016-05-30)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD55:2016
Edition 3.0 (2016-12-16)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-1:1969/AMD56:2017
Edition 3.0 (2017-05-16)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

IEC 60061-1:1969/AMD56:2017/COR1:2017
Edition 3.0 (2017-11-14)
Corrigendum 1 - Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

IEC 60061-1:1969/AMD57:2017
Edition 3.0 (2017-12-15)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps Caps

IEC 60061-1:1969/AMD58:2018
Edition 3.0 (2018-08-23)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD58:2018/COR1:2019
Edition 3.0 (2019-03-12)
Corrigendum 1 - Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD59:2019
Edition 3.0 (2019-07-08)
Amendment 59 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD60:2020
Edition 3.0 (2020-03-31)
Amendment 60 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamps caps

IEC 60061-1:1969/AMD61:2020
Edition 3.0 (2020-11-27)
Amendment 61 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps

IEC 60061-2:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD18:1998
Edition 3.0 (1998-03-16)
Amendment 18 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD19:1999
Edition 3.0 (1999-02-23)
Amendment 19 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD20:1999
Edition 3.0 (1999-07-29)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD21:2000
Edition 3.0 (2000-05-26)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD22:2001
Edition 3.0 (2001-02-13)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD23:2001
Edition 3.0 (2001-02-13)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD24:2001
Edition 3.0 (2001-10-26)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD25:2002
Edition 3.0 (2002-05-03)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD26:2002
Edition 3.0 (2002-05-13)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2:1969/AMD27:2002
Edition 3.0 (2002-10-29)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD28:2003
Edition 3.0 (2003-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD29:2003
Edition 3.0 (2003-09-03)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD30:2003
Edition 3.0 (2003-10-30)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : Lampholders

IEC 60061-2:1969/AMD31:2004
Edition 3.0 (2004-07-26)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD32:2004
Edition 3.0 (2004-11-25)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD33:2005
Edition 3.0 (2005-10-03)
Amendment 33 to IEC 60061-2: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD34:2006
Edition 3.0 (2006-05-30)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD35:2006
Edition 3.0 (2006-12-14)
Amendment 35 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD36:2007
Edition 3.0 (2007-04-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD37:2008
Edition 3.0 (2008-07-18)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD38:2009
Edition 3.0 (2009-04-29)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD39:2009
Edition 3.0 (2009-07-24)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD40:2010
Edition 3.0 (2010-02-22)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD41:2010
Edition 3.0 (2010-04-29)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD42:2011
Edition 3.0 (2011-06-30)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD44:2011
Edition 3.0 (2011-11-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD45:2012
Edition 3.0 (2012-09-27)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD46:2013
Edition 3.0 (2013-02-26)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD47:2014
Edition 3.0 (2014-02-19)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD48:2014
Edition 3.0 (2014-12-11)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD49:2015
Edition 3.0 (2015-07-24)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD50:2015
Edition 3.0 (2015-08-21)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD51:2016
Edition 3.0 (2016-05-30)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD52:2017
Edition 3.0 (2017-05-16)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Holders

IEC 60061-2:1969/AMD53:2017
Edition 3.0 (2017-12-15)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD54:2018
Edition 3.0 (2018-08-23)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD55:2020
Edition 3.0 (2020-03-31)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD56:2020
Edition 3.0 (2020-05-13)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-2:1969/AMD57:2020
Edition 3.0 (2020-11-27)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders

IEC 60061-3:2005 CSV
Edition 3.3 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969
Edition 3.0 (1969-01-01)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD20:1998
Edition 3.0 (1998-03-16)
Amendment 20 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD21:1999
Edition 3.0 (1999-02-23)
Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD22:1999
Edition 3.0 (1999-07-29)
Amendment 22 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD23:2000
Edition 3.0 (2000-05-18)
Amendment 23 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD24:2001
Edition 3.0 (2001-02-13)
Amendment 24 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD25:2001
Edition 3.0 (2001-02-13)
Amendment 25 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD26:2001
Edition 3.0 (2001-10-26)
Amendment 26 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD27:2002
Edition 3.0 (2002-05-03)
Amendment 27 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD28:2002
Edition 3.0 (2002-05-13)
Amendment 28 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3:1969/AMD29:2002
Edition 3.0 (2002-10-31)
Amendment 29 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD30:2003
Edition 3.0 (2003-05-15)
Amendment 30 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD31:2003
Edition 3.0 (2003-09-03)
Amendment 31 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : Gauges

IEC 60061-3:1969/AMD32:2003
Edition 3.0 (2003-10-30)
Amendment 32 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD33:2004
Edition 3.0 (2004-07-26)
Amendment 33 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD34:2004
Edition 3.0 (2004-11-25)
Amendment 34 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD35:2005
Edition 3.0 (2005-10-03)
Amendment 35 to IEC 60061-3: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD36:2006
Edition 3.0 (2006-05-30)
Amendment 36 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD37:2006
Edition 3.0 (2006-12-14)
Amendment 37 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD38:2007
Edition 3.0 (2007-04-30)
Amendment 38 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD39:2009
Edition 3.0 (2009-04-29)
Amendment 39 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD40:2009
Edition 3.0 (2009-07-24)
Amendment 40 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD41:2010
Edition 3.0 (2010-02-22)
Amendment 41 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD42:2010
Edition 3.0 (2010-04-29)
Amendment 42 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD43:2011
Edition 3.0 (2011-06-30)
Amendment 43 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD44:2011
Edition 3.0 (2011-07-28)
Amendment 44 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD45:2011
Edition 3.0 (2011-11-28)
Amendment 45 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD46:2012
Edition 3.0 (2012-09-27)
Amendment 46 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD47:2013
Edition 3.0 (2013-02-26)
Amendment 47 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD48:2014
Edition 3.0 (2014-02-19)
Amendment 48 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD49:2014
Edition 3.0 (2014-12-11)
Amendment 49 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD50:2015
Edition 3.0 (2015-07-24)
Amendment 50 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD51:2015
Edition 3.0 (2015-08-21)
Amendment 51 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD52:2016
Edition 3.0 (2016-05-30)
Amendment 52 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD53:2017
Edition 3.0 (2017-05-16)
Amendment 53 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD54:2017
Edition 3.0 (2017-12-15)
Amendment 54 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD55:2018
Edition 3.0 (2018-08-23)
Amendment 55 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD56:2019
Edition 3.0 (2019-07-08)
Amendment 56 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD57:2020
Edition 3.0 (2020-03-31)
Amendment 57 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-3:1969/AMD58:2020
Edition 3.0 (2020-05-13)
Amendment 58 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges

IEC 60061-4:2005 CSV
Edition 1.9 (2005-01-27)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990
Edition 1.0 (1990-02-28)
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD5:1998
Edition 1.0 (1998-03-16)
Amendment 5 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD6:2000
Edition 1.0 (2000-05-18)
Amendment 6 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD7:2001
Edition 1.0 (2001-10-26)
Amendment 7 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD8:2003
Edition 1.0 (2003-05-13)
Amendment 8 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4:1990/AMD9:2004
Edition 1.0 (2004-11-25)
Amendment 9 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD10:2006
Edition 1.0 (2006-05-30)
Amendment 10 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD11:2007
Edition 1.0 (2007-10-16)
Amendment 11 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD12:2009
Edition 1.0 (2009-07-24)
Amendment 12 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD13:2010
Edition 1.0 (2010-08-31)
Amendment 13 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD14:2011
Edition 1.0 (2011-08-26)
Amendment 14 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD15:2017
Edition 1.0 (2017-05-16)
Amendment 15 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-4:1990/AMD16:2018
Edition 1.0 (2018-03-22)
Amendment 16 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information

IEC 60061-1L:1987
Edition 3.0 (1987-01-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1M:1989
Edition 3.0 (1989-01-01)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1N:1992
Edition 3.0 (1992-04-30)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1P:1994
Edition 3.0 (1994-03-01)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1Q:1994
Edition 3.0 (1994-11-23)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1R:1995
Edition 3.0 (1995-11-08)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1S:1996
Edition 3.0 (1996-02-01)
seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1T:1996
Edition 3.0 (1996-07-01)
eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1U:1996
Edition 3.0 (1996-10-01)
nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-1V:1997
Edition 3.0 (1997-05-23)
Twentieth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps

IEC 60061-2H:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Eight supplement.

IEC 60061-2J:1989
Edition 3.0 (1989-12-31)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders - Ninth supplement.

IEC 60061-2K:1992
Edition 3.0 (1992-04-15)
Tenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2L:1994
Edition 3.0 (1994-03-01)
Eleventh supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2M:1994
Edition 3.0 (1994-11-23)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2N:1995
Edition 3.0 (1995-11-08)
Thirteenth suplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2P:1996
Edition 3.0 (1996-02-01)
Fourtheenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2Q:1996
Edition 3.0 (1996-07-01)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2R:1996
Edition 3.0 (1996-10-01)
sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-2S:1997
Edition 3.0 (1997-05-23)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders

IEC 60061-3K:1987
Edition 3.0 (1987-06-30)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Tenth supplement.

IEC 60061-3L:1989
Edition 3.0 (1989-12-15)
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges - Eleventh supplement.

IEC 60061-3M:1992
Edition 3.0 (1992-04-30)
Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3N:1994
Edition 3.0 (1994-03-01)
Thirteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3P:1994
Edition 3.0 (1994-11-23)
Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3Q:1995
Edition 3.0 (1995-11-08)
Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3R:1996
Edition 3.0 (1996-02-01)
Sixteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3S:1996
Edition 3.0 (1996-07-01)
Seventeenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3T:1996
Edition 3.0 (1996-10-01)
Eighteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-3U:1997
Edition 3.0 (1997-05-23)
Nineteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

IEC 60061-4A:1992
Edition 1.0 (1992-04-30)
First supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4B:1994
Edition 1.0 (1994-01-01)
Second supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4C:1994
Edition 1.0 (1994-11-01)
Third supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60061-4D:1995
Edition 1.0 (1995-01-01)
Fourth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information

IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV
Edition 6.3 (2005-05-24)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993
Edition 6.0 (1993-12-17)
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD1:2000
Edition 6.0 (2000-11-28)
Amendment 1 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD2:2002
Edition 6.0 (2002-11-29)
Amendment 2 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD3:2005
Edition 6.0 (2005-03-17)
Amendment 3 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD4:2007
Edition 6.0 (2007-02-16)
Amendment 4 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60064:1993/AMD5:2009
Edition 6.0 (2009-07-30)
Amendment 5 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

IEC 60068-2-20:2021
Edition 6.0 (2021-03-30)
Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads

IEC 60068-2-21:2021
Edition 7.0 (2021-07-08)
Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices

IEC 60068-2-42:2003
Edition 3.0 (2003-05-22)
Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-43:2003
Edition 2.0 (2003-05-23)
Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-46:1982
Edition 1.0 (1982-01-01)
Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

IEC 60068-2-49:1983
Edition 1.0 (1983-01-01)
Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections

IEC 60068-2-58:2015
Edition 4.0 (2015-03-27)
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 60068-2-58:2015/AMD1:2017
Edition 4.0 (2017-07-28)
Amendment 1 - Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)

IEC 60068-2-69:2017
Edition 3.0 (2017-03-07)
Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

IEC 60068-2-69:2017/COR1:2018
Edition 3.0 (2018-01-24)
Corrigendum 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement)

IEC 60068-2-69:2017/AMD1:2019
Edition 3.0 (2019-06-19)
Amendment 1 - Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method

IEC 60068-2-82:2019
Edition 2.0 (2019-05-14)
Environmental testing - Part 2-82: Tests - Test Xw1: Whisker test methods for components and parts used in electronic assemblies

IEC 60068-2-83:2011
Edition 1.0 (2011-09-07)
Environmental testing - Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste

IEC TR 60068-3-12:2014
Edition 2.0 (2014-10-17)
Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile

IEC 60068-3-13:2016
Edition 1.0 (2016-05-13)
Environmental testing - Part 3-13: Supporting documentation and guidance on Test T - Soldering

IEC 60072-2:1990
Edition 1.0 (1990-12-31)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

IEC 60072-3:1994
Edition 1.0 (1994-03-11)
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

IEC 60079-0:2017
Edition 7.0 (2017-12-13)
Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-0:2017/ISH1:2019
Edition 7.0 (2019-04-23)
Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-0:2017/ISH2:2019
Edition 7.0 (2019-06-27)
Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-0:2017/COR1:2020
Edition 7.0 (2020-01-20)
Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements

IEC 60079-1:2014
Edition 7.0 (2014-06-27)
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

IEC 60079-1:2014/ISH1:2020
Edition 7.0 (2020-05-28)
Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

IEC 60079-1:2014/COR1:2018
Edition 7.0 (2018-06-26)
Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

IEC 60079-2:2014
Edition 6.0 (2014-07-21)
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

IEC 60079-2:2014/COR1:2015
Edition 6.0 (2015-07-07)
Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

IEC 60079-5:2015
Edition 4.0 (2015-02-17)
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

IEC 60079-5:2015/AMD1:2022
Edition 4.0 (2022-05-12)
Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

IEC 60079-6:2015
Edition 4.0 (2015-02-20)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

IEC 60079-6:2015/AMD1:2020
Edition 4.0 (2020-02-24)
Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

IEC 60079-7:2015
Edition 5.0 (2015-06-26)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

IEC 60079-7:2015/ISH1:2016
Edition 5.0 (2016-09-15)
Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

IEC 60079-7:2015/AMD1:2017
Edition 5.0 (2017-08-04)
Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

IEC 60079-10-1:2020
Edition 3.0 (2020-12-18)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

IEC 60079-10-2:2015
Edition 2.0 (2015-01-16)
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

IEC 60079-11:2011
Edition 6.0 (2011-06-30)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH1:2014
Edition 6.0 (2014-10-08)
Interpretation sheet 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH2:2016
Edition 6.0 (2016-07-21)
Interpretation sheet 2 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH3:2016
Edition 6.0 (2016-07-21)
Intrepretation sheet 3 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH4:2019
Edition 6.0 (2019-04-16)
Interpretation Sheet 4 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH5:2019
Edition 6.0 (2019-08-29)
Interpretation Sheet 5 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/ISH6:2019
Edition 6.0 (2019-12-13)
Interpretation sheet 6 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-11:2011/COR1:2012
Edition 6.0 (2012-01-27)
Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

IEC 60079-13:2017
Edition 2.0 (2017-05-22)
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

IEC 60079-14:2013
Edition 5.0 (2013-11-28)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection

IEC 60079-14:2013/ISH1:2017
Edition 5.0 (2017-02-13)
Intrepretation sheet 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

IEC 60079-14:2013/ISH2:2020
Edition 5.0 (2020-03-13)
Interpretation sheet 2 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

IEC 60079-14:2013/COR1:2016
Edition 5.0 (2016-01-28)
Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

IEC 60079-15:2017
Edition 5.0 (2017-12-08)
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

IEC TR 60079-16:1990
Edition 1.0 (1990-05-15)
Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses

IEC 60079-17:2013
Edition 5.0 (2013-11-19)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

IEC 60079-18:2014
Edition 4.0 (2014-12-12)
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

IEC 60079-18:2014/COR1:2018
Edition 4.0 (2018-07-25)
Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

IEC 60079-18:2014/AMD1:2017
Edition 4.0 (2017-08-24)
Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

IEC 60079-19:2019
Edition 4.0 (2019-10-18)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

IEC 60079-25:2020
Edition 3.0 (2020-06-26)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems

IEC 60079-25:2020/COR1:2020
Edition 3.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

IEC 60079-28:2015
Edition 2.0 (2015-05-27)
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

IEC 60079-28:2015/ISH1:2019
Edition 2.0 (2019-11-14)
Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

IEC 60079-29-1:2016
Edition 2.0 (2016-07-21)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2016/ISH1:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2016/ISH2:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-1:2016/AMD1:2020
Edition 2.0 (2020-03-24)
Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

IEC 60079-29-2:2015
Edition 2.0 (2015-03-16)
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

IEC 60079-29-3:2014
Edition 1.0 (2014-03-27)
Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

IEC 60079-29-4:2009
Edition 1.0 (2009-11-10)
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

IEC 60079-29-4:2009/COR1:2010
Edition 1.0 (2010-08-10)
Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

IEC/IEEE 60079-30-1:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

IEC/IEEE 60079-30-2:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

IEC TS 60079-32-1:2013
Edition 1.0 (2013-08-20)
Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

IEC TS 60079-32-1:2013/AMD1:2017
Edition 1.0 (2017-03-16)
Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

IEC 60079-32-2:2015
Edition 1.0 (2015-02-25)
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

IEC 60079-33:2012
Edition 1.0 (2012-09-27)
Explosive atmospheres - Part 33: Equipment protection by special protection 's'

IEC 60079-35-1:2011
Edition 1.0 (2011-05-26)
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

IEC 60079-35-2:2011
Edition 1.0 (2011-12-07)
Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

IEC TS 60079-39:2015
Edition 1.0 (2015-06-11)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

IEC TS 60079-39:2015/COR1:2020
Edition 1.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

IEC TS 60079-40:2015
Edition 1.0 (2015-02-05)
Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems

IEC TS 60079-42:2019
Edition 1.0 (2019-04-17)
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

IEC TS 60079-43:2017
Edition 1.0 (2017-11-13)
Explosive atmospheres - Part 43: Equipment in adverse service conditions

IEC TS 60079-46:2017
Edition 1.0 (2017-08-31)
Explosive atmospheres - Part 46: Equipment assemblies

IEC 60081:1997+AMD1:2000 CSV
Edition 5.1 (2002-05-29)
Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997
Edition 5.0 (1997-12-15)
Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD1:2000
Edition 5.0 (2000-01-27)
Amendment 1 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD2:2003
Edition 5.0 (2003-03-04)
Amendment 2 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD3:2005
Edition 5.0 (2005-09-27)
Amendment 3 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD4:2010
Edition 5.0 (2010-02-18)
Amendment 4 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD5:2013
Edition 5.0 (2013-07-19)
Amendment 5 - Double-capped fluorescent lamps - Performance specifications

IEC 60081:1997/AMD6:2017
Edition 5.0 (2017-08-25)
Amendment 6 - Double-capped fluorescent lamps - Performance specifications

IEC 60086-4:2019
Edition 5.0 (2019-04-25)
Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4:2019/ISH1:2020
Edition 5.0 (2020-05-14)
Interpretation sheet 1 - Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4:2019/COR1:2019
Edition 5.0 (2019-10-10)
Corrigendum 1 - Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-4:2019/COR2:2020
Edition 5.0 (2020-04-22)
Corrigendum 2 - Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-5:2021
Edition 5.0 (2021-09-30)
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

IEC 60086-5:2021/COR1:2022
Edition 5.0 (2022-06-03)
Corrigendum 1 - Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

IEC 60086-6:2020
Edition 1.0 (2020-02-07)
Primary batteries - Part 6: Guidance on environmental aspects

IEC 60130-1:1988
Edition 2.0 (1988-11-10)
Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

IEC 60130-5:1966
Edition 1.0 (1966-01-01)
Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

IEC 60130-9:2011
Edition 4.0 (2011-02-23)
Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

IEC 60130-10:1971
Edition 1.0 (1971-01-01)
Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

IEC 60130-12:1976
Edition 2.0 (1976-01-01)
Connectors for frequencies below 3 MHz - Part 12: Link and test connectors

IEC 60130-17:1998
Edition 1.0 (1998-02-12)
Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

IEC 60136:1986
Edition 2.0 (1986-06-30)
Dimensions of brushes and brush-holders for electrical machinery

IEC 60136:1986/AMD1:1995
Edition 2.0 (1995-04-26)
Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery

IEC 60146-1-1:2009
Edition 4.0 (2009-06-29)
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

IEC TR 60146-1-2:2019
Edition 5.0 (2019-10-22)
Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines

IEC 60146-2:1999
Edition 2.0 (1999-11-18)
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

IEC 60155:1993
Edition 4.0 (1993-11-30)
Glow-starters for fluorescent lamps

IEC 60155:1993/AMD1:1995
Edition 4.0 (1995-10-17)
Amendment 1 - Glow-starters for fluorescent lamps

IEC 60155:1993/AMD2:2006
Edition 4.0 (2006-11-27)
Amendment 2 - Glow-starters for fluorescent lamps

IEC 60188:2001
Edition 3.0 (2001-05-30)
High-pressure mercury vapour lamps - Performance specifications

IEC 60192:2001
Edition 3.0 (2001-05-22)
Low-pressure sodium vapour lamps - Performance specifications

IEC 60238:2016
Edition 9.0 (2016-07-14)
Edison screw lampholders

IEC 60238:2016/AMD1:2017
Edition 9.0 (2017-01-30)
Amendment 1 - Edison screw lampholders

IEC 60238:2016/AMD1:2017/COR1:2018
Edition 9.0 (2018-01-30)
Corrigendum 1 - Amendment 1 - Edison screw lampholders

IEC 60238:2016/AMD2:2020
Edition 9.0 (2020-01-20)
Amendment 2 - Edison screw lampholders

IEC 60240-1:1992
Edition 2.0 (1992-07-31)
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters

IEC 60276:2018
Edition 2.0 (2018-05-08)
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

IEC 60335-2-40:2022
Edition 7.0 (2022-05-25)
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IEC 60335-2-70:2002+AMD1:2007 CSV
Edition 2.1 (2007-05-23)
Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

IEC 60335-2-70:2002
Edition 2.0 (2002-03-20)
Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

IEC 60335-2-70:2002/AMD1:2007
Edition 2.0 (2007-03-07)
Amendment 1 - Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

IEC 60335-2-70:2002/AMD2:2013
Edition 2.0 (2013-03-06)
Amendment 2 - Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines

IEC 60335-2-71:2018
Edition 3.0 (2018-01-23)
Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals

IEC 60335-2-76:2018
Edition 3.0 (2018-06-29)
Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers

IEC 60335-2-76:2018/COR1:2018
Edition 3.0 (2018-11-27)
Corrigendum 1 - Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers

IEC 60335-2-86:2018
Edition 3.0 (2018-04-20)
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines

IEC 60335-2-87:2016
Edition 3.0 (2016-05-25)
Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning equipment

IEC 60335-2-87:2016/AMD1:2018
Edition 3.0 (2018-02-21)
Amendement 1 - Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal stunning equipment

IEC 60335-2-88:2002
Edition 2.0 (2002-10-29)
Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems

IEC 60352-1:1997
Edition 3.0 (1997-08-06)
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

IEC 60352-1:1997/COR1:1998
Edition 3.0 (1998-10-07)
Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

IEC 60352-2:2006
Edition 2.0 (2006-02-23)
Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

IEC 60352-2:2006/AMD1:2013
Edition 2.0 (2013-06-27)
Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

IEC 60352-3:2020
Edition 2.0 (2020-04-09)
Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

IEC 60352-4:2020
Edition 2.0 (2020-06-11)
Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

IEC 60352-5:2020
Edition 5.0 (2020-07-22)
Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

IEC 60352-6:1997
Edition 1.0 (1997-08-26)
Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

IEC 60352-8:2011
Edition 1.0 (2011-02-10)
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

IEC 60356:1971
Edition 1.0 (1971-01-01)
Dimensions for commutators and slip-rings

IEC 60357:2002
Edition 3.0 (2002-11-15)
Tungsten halogen lamps (non vehicle) - Performance specifications

IEC 60357:2002/AMD1:2006
Edition 3.0 (2006-04-11)
Amendment 1 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60357:2002/AMD2:2008
Edition 3.0 (2008-10-08)
Amendment 2 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60357:2002/AMD3:2011
Edition 3.0 (2011-01-27)
Amendment 3 - Tungsten halogen lamps (non-vehicle) - Performance specifications

IEC 60360:1998
Edition 3.0 (1998-06-10)
Standard method of measurement of lamp cap temperature rise

IEC 60360:1998/COR1:1999
Edition 3.0 (1999-03-16)
Corrigendum 1 - Standard method of measurement of lamp cap temperature rise

IEC 60364-7-701:2019
Edition 3.0 (2019-10-14)
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

IEC 60364-7-702:2010
Edition 3.0 (2010-05-12)
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains

IEC 60364-7-703:2004
Edition 2.0 (2004-10-26)
Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters

IEC 60364-7-708:2017
Edition 3.0 (2017-04-10)
Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

IEC 60364-7-710:2021
Edition 2.0 (2021-05-05)
Low-voltage electrical installations - Part 7-710: Requirements for special installations or locations - Medical locations

IEC 60364-7-712:2017
Edition 2.0 (2017-04-10)
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

IEC 60364-7-721:2017
Edition 2.0 (2017-06-15)
Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans

IEC 60364-7-740:2000
Edition 1.0 (2000-10-18)
Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses

IEC 60370:2017
Edition 2.0 (2017-12-13)
Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods

IEC 60371-1:2003
Edition 3.0 (2003-04-09)
Specification for insulating materials based on mica - Part 1: Definitions and general requirements

IEC 60371-2:2004
Edition 3.0 (2004-06-23)
Specification for insulating materials based on mica - Part 2: Methods of test

IEC 60371-3-1:2006
Edition 3.0 (2006-06-13)
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials

IEC 60371-3-2:2005
Edition 2.0 (2005-10-24)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper

IEC 60371-3-3:1983
Edition 1.0 (1983-01-01)
Specification for insulating materials based on mica. Part 3: Specifications for individual materials. Sheet 3: Rigid mica materials for heating equipment

IEC 60371-3-4:1992
Edition 1.0 (1992-11-20)
Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-4:1992/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-5:2005
Edition 2.0 (2005-11-21)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)

IEC 60371-3-6:1992
Edition 1.0 (1992-11-30)
Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-6:1992/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder

IEC 60371-3-7:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

IEC 60371-3-7:1995/AMD1:2006
Edition 1.0 (2006-09-27)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping

IEC 60371-3-8:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables

IEC 60371-3-8:1995/AMD1:2007
Edition 1.0 (2007-04-11)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables

IEC 60371-3-9:1995
Edition 1.0 (1995-08-30)
Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

IEC 60371-3-9:1995/AMD1:2007
Edition 1.0 (2007-04-11)
Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite

IEC 60384-14:2013
Edition 4.0 (2013-06-05)
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-14:2013/COR1:2016
Edition 4.0 (2016-04-13)
Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-14:2013/AMD1:2016
Edition 4.0 (2016-07-14)
Amendment 1 - Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 60384-14-1:2016
Edition 3.0 (2016-01-19)
Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ

IEC 60384-14-2:2016
Edition 2.0 (2016-04-07)
Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only

IEC 60394-1:1972
Edition 1.0 (1972-01-01)
Varnished fabrics for electrical purposes. Part 1: Definitions and general requirements

IEC 60394-2:1972
Edition 1.0 (1972-01-01)
Varnished fabrics for electrical purposes. Part 2: Methods of test

IEC 60394-3-1:1976
Edition 1.0 (1976-01-01)
Varnished fabrics for electrical purposes. Part 3-1: Specifications for individual materials. Oleoresinous varnish-cotton base, OR/C

IEC 60394-3-2:1988
Edition 1.0 (1988-03-30)
Varnished fabrics for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Glass-fabric based varnished fabrics with epoxy, polyuréthane, silicone, polyester, bituminous or oleoresinous varnish

IEC 60399:2004+AMD1:2008 CSV
Edition 2.1 (2008-10-21)
Barrel thread for lampholders with shade holder ring

IEC 60399:2004
Edition 2.0 (2004-10-07)
Barrel thread for lampholders with shade holder ring

IEC 60399:2004/AMD1:2008
Edition 2.0 (2008-07-08)
Amendment 1 - Barrel thread for lampholders with shade holder ring

IEC 60400:2017
Edition 8.0 (2017-06-15)
Lampholders for tubular fluorescent lamps and starterholders

IEC 60400:2017/AMD1:2020
Edition 8.0 (2020-02-25)
Amendment 1 - Lampholders for tubular fluorescent lamps and starterholders

IEC 60400:2017/AMD2:2022
Edition 8.0 (2022-02-01)
Amendment 2 - Lampholders for tubular fluorescent lamps and starterholders

IEC 60413:1972
Edition 1.0 (1972-01-01)
Test procedures for determining physical properties of brush materials for electrical machines

IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV
Edition 2.2 (2012-02-10)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999
Edition 2.0 (1999-08-13)
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-1:1999/AMD2:2011
Edition 2.0 (2011-12-07)
Amendment 2 - Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV
Edition 2.2 (2012-05-15)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999+AMD1:2005 CSV
Edition 2.1 (2005-05-12)
Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999
Edition 2.0 (1999-10-13)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999/AMD1:2005
Edition 2.0 (2005-03-07)
Amendment 1 - Incandescent lamps - Safety specifications - Part 2: Tungsten-halogen lamps for domestic and similar general lighting purposes

IEC 60432-2:1999/AMD2:2012
Edition 2.0 (2012-03-22)
Amendment 2 - Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes

IEC 60432-3:2012
Edition 2.0 (2012-07-04)
Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)

IEC 60434:1973
Edition 1.0 (1973-01-01)
Aircraft electrical filament lamps

IEC 60434:1973/AMD1:1981
Edition 1.0 (1981-08-01)
Amendment 1 - Aircraft electrical filament lamps

IEC 60434:1973/AMD2:1984
Edition 1.0 (1984-01-01)
Amendment 2 - Aircraft electrical filament lamps

IEC 60436:2015
Edition 4.0 (2015-10-29)
Electric dishwashers for household use - Methods for measuring the performance

IEC 60436:2015/COR1:2020
Edition 4.0 (2020-09-29)
Corrigendum 1 - Electric dishwashers for household use - Methods for measuring the performance

IEC 60436:2015/AMD1:2020
Edition 4.0 (2020-05-29)
Amendment 1 - Electric dishwashers for household use - Methods for measuring the performance

IEC 60454-1:1992
Edition 2.0 (1992-05-31)
Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements

IEC 60454-2:2007
Edition 3.0 (2007-06-21)
Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test

IEC 60454-2:2007/COR1:2009
Edition 3.0 (2009-12-17)
Corrigendum 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test

IEC 60454-3-1:1998+AMD1:2001 CSV
Edition 2.1 (2002-12-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

IEC 60454-3-1:1998
Edition 2.0 (1998-02-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

IEC 60454-3-1:1998/AMD1:2001
Edition 2.0 (2001-05-28)
Amendment 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive

IEC 60454-3-2:2006
Edition 3.0 (2006-01-23)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives

IEC 60454-3-4:2007
Edition 3.0 (2007-06-05)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive

IEC 60454-3-7:1998
Edition 2.0 (1998-03-16)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive

IEC 60454-3-8:2006
Edition 3.0 (2006-02-13)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre

IEC 60454-3-11:2007
Edition 2.0 (2007-05-10)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive

IEC 60454-3-12:2006
Edition 2.0 (2006-01-23)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive

IEC 60454-3-14:2001
Edition 1.0 (2001-07-10)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive

IEC 60454-3-19:2003
Edition 1.0 (2003-05-19)
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides

IEC 60455-1:1998
Edition 2.0 (1998-08-25)
Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements

IEC 60455-2:2015
Edition 3.0 (2015-06-25)
Resin based reactive compounds used for electrical insulation - Part 2: Methods of test

IEC 60455-2-2:1984
Edition 1.0 (1984-01-01)
Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 2-2: Methods of test - Test methods for coating powders for electrical purposes

IEC 60455-3-1:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds

IEC 60455-3-2:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds

IEC 60455-3-3:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds

IEC 60455-3-4:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds

IEC 60455-3-5:2006
Edition 3.0 (2006-03-08)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins

IEC 60455-3-8:2021
Edition 2.0 (2021-06-16)
Resin based reactive compounds used for electrical insulation - Part 3-8: Specifications for individual materials - Resins for cable accessories

IEC 60455-3-11:1988
Edition 1.0 (1988-04-15)
Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 11: Epoxy resin-based coating powders

IEC 60464-1:1998
Edition 2.0 (1998-11-16)
Varnishes used for electrical insulation - Part 1: Definitions and general requirements

IEC 60464-1:1998/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 1: Definitions and general requirements

IEC 60464-2:2001
Edition 2.0 (2001-07-31)
Varnishes used for electrical insulation - Part 2: Methods of test

IEC 60464-2:2001/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 2: Methods of test

IEC 60464-3-1:2001
Edition 2.0 (2001-07-10)
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

IEC 60464-3-1:2001/AMD1:2006
Edition 2.0 (2006-01-17)
Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes

IEC 60464-3-2:2001
Edition 2.0 (2001-07-10)
Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

IEC 60464-3-2:2001/AMD1:2006
Edition 2.0 (2006-04-27)
Amendment 1 - Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes

IEC TR 60479-4:2020
Edition 3.0 (2020-02-26)
Effects of current on human beings and livestock - Part 4: Effects of lightning strokes

IEC 60512-1:2018
Edition 5.0 (2018-10-22)
Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification

IEC 60512-1-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

IEC 60512-1-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

IEC 60512-1-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

IEC 60512-1-4:1997
Edition 1.0 (1997-07-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

IEC 60512-1-4:1997/COR1:2000
Edition 1.0 (2000-11-15)
Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

IEC 60512-1-100:2012
Edition 3.0 (2012-02-22)
Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

IEC 60512-1-101:2015
Edition 1.0 (2015-05-05)
Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification

IEC 60512-2-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

IEC 60512-2-2:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

IEC 60512-2-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

IEC 60512-2-5:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

IEC 60512-2-6:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

IEC 60512-3-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

IEC 60512-4-1:2003
Edition 1.0 (2003-05-16)
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

IEC 60512-4-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

IEC 60512-4-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

IEC 60512-5-1:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

IEC 60512-5-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

IEC 60512-6-1:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

IEC 60512-6-2:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

IEC 60512-6-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

IEC 60512-6-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

IEC 60512-6-5:1997
Edition 1.0 (1997-10-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

IEC 60512-7-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

IEC 60512-7-2:2011
Edition 1.0 (2011-11-17)
Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

IEC 60512-8-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

IEC 60512-8-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

IEC 60512-8-3:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

IEC 60512-9-1:2010
Edition 1.0 (2010-03-17)
Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

IEC 60512-9-2:2011
Edition 1.0 (2011-11-28)
Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

IEC 60512-9-3:2011
Edition 2.0 (2011-06-22)
Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

IEC 60512-9-4:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

IEC 60512-9-5:2020
Edition 2.0 (2020-06-09)
Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

IEC 60512-10-4:2003
Edition 2.0 (2003-08-11)
Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

IEC 60512-11-1:2019
Edition 2.0 (2019-05-16)
Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

IEC 60512-11-2:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

IEC 60512-11-3:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

IEC 60512-11-4:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

IEC 60512-11-5:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

IEC 60512-11-6:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

IEC 60512-11-7:2003
Edition 2.0 (2003-05-22)
Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

IEC 60512-11-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

IEC 60512-11-9:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

IEC 60512-11-10:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

IEC 60512-11-11:2002
Edition 1.0 (2002-02-22)
Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

IEC 60512-11-12:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

IEC 60512-11-13:2002
Edition 1.0 (2002-02-21)
Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

IEC 60512-11-14:2003
Edition 2.0 (2003-07-24)
Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

IEC 60512-12-1:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

IEC 60512-12-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

IEC 60512-12-3:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

IEC 60512-12-4:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

IEC 60512-12-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

IEC 60512-12-6:1996
Edition 1.0 (1996-01-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

IEC 60512-12-7:2001
Edition 1.0 (2001-01-24)
Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

IEC 60512-13-1:2006
Edition 2.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

IEC 60512-13-2:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

IEC 60512-13-5:2006
Edition 1.0 (2006-02-13)
Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

IEC 60512-14-2:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

IEC 60512-14-4:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

IEC 60512-14-5:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

IEC 60512-14-6:2006
Edition 1.0 (2006-03-23)
Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

IEC 60512-14-7:1997
Edition 1.0 (1997-10-30)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

IEC 60512-15-1:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

IEC 60512-15-2:2018
Edition 2.0 (2018-01-12)
Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

IEC 60512-15-3:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

IEC 60512-15-4:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

IEC 60512-15-5:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

IEC 60512-15-6:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

IEC 60512-15-7:2008
Edition 1.0 (2008-05-09)
Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

IEC 60512-15-8:1995
Edition 1.0 (1995-11-16)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

IEC 60512-16-1:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

IEC 60512-16-2:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

IEC 60512-16-3:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

IEC 60512-16-4:2008
Edition 1.0 (2008-06-11)
Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

IEC 60512-16-5:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

IEC 60512-16-6:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

IEC 60512-16-7:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

IEC 60512-16-8:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

IEC 60512-16-9:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

IEC 60512-16-11:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

IEC 60512-16-13:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

IEC 60512-16-14:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

IEC 60512-16-16:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

IEC 60512-16-17:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

IEC 60512-16-18:2008
Edition 1.0 (2008-05-14)
Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

IEC 60512-16-20:1996
Edition 1.0 (1996-07-31)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

IEC 60512-16-21:2012
Edition 1.0 (2012-05-07)
Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

IEC 60512-17-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

IEC 60512-17-2:2011
Edition 1.0 (2011-04-07)
Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

IEC 60512-17-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

IEC 60512-17-4:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

IEC 60512-19-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

IEC 60512-19-3:1997
Edition 1.0 (1997-07-01)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

IEC 60512-20-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

IEC 60512-20-2:2000
Edition 1.0 (2000-04-13)
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

IEC 60512-20-3:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

IEC 60512-21-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance

IEC 60512-22-1:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

IEC 60512-23-2:2010
Edition 1.0 (2010-06-10)
Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

IEC 60512-23-3:2018
Edition 2.0 (2018-12-14)
Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

IEC 60512-23-4:2001
Edition 1.0 (2001-06-19)
Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

IEC 60512-23-7:2005
Edition 1.0 (2005-01-27)
Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

IEC 60512-24-1:2010
Edition 1.0 (2010-03-24)
Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

IEC 60512-25-1:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

IEC 60512-25-2:2002
Edition 1.0 (2002-03-12)
Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

IEC 60512-25-3:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation

IEC 60512-25-4:2001
Edition 1.0 (2001-07-26)
Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

IEC 60512-25-5:2004
Edition 1.0 (2004-07-15)
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

IEC 60512-25-6:2004
Edition 1.0 (2004-05-26)
Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

IEC 60512-25-7:2004
Edition 1.0 (2004-12-15)
Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

IEC 60512-25-9:2008
Edition 1.0 (2008-08-28)
Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

IEC 60512-26-100:2008+AMD1:2011 CSV
Edition 1.1 (2011-05-25)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-26-100:2008
Edition 1.0 (2008-07-21)
Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-26-100:2008/AMD1:2011
Edition 1.0 (2011-03-14)
Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

IEC 60512-27-100:2011
Edition 1.0 (2011-12-07)
Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g

IEC PAS 60512-27-200:2018
Edition 1.0 (2018-10-19)
Connectors for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

IEC 60512-28-100:2019
Edition 2.0 (2019-11-15)
Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

IEC 60512-29-100:2015
Edition 1.0 (2015-03-05)
Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

IEC 60512-99-001:2012
Edition 1.0 (2012-08-13)
Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

IEC 60512-99-002:2022
Edition 2.0 (2022-01-28)
Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load

IEC TR 60513:1994
Edition 2.0 (1994-01-08)
Fundamental aspects of safety standards for medical electrical equipment

IEC 60519-1:2020
Edition 6.0 (2020-03-11)
Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements

IEC 60519-3:2005
Edition 3.0 (2005-02-17)
Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations

IEC 60519-4:2021
Edition 5.0 (2021-12-15)
Safety in installations for electroheating and electromagnetic processing - Part 4: Particular requirements for arc furnace installations

IEC 60519-6:2022
Edition 4.0 (2022-01-20)
Safety in installations for electroheating and electromagnetic processing - Part 6: Particular requirements for high frequency dielectric and microwave heating and processing equipment

IEC 60519-7:2008
Edition 2.0 (2008-02-27)
Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns

IEC 60519-10:2013
Edition 2.0 (2013-02-22)
Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications

IEC 60519-11:2007
Edition 2.0 (2007-06-22)
Safety in electroheat installations - Part 11: Particular requirements for installations using the effect of electromagnetic forces on liquid metals

IEC 60519-12:2016
Edition 2.0 (2016-12-15)
Safety in installations for electroheating and electromagnetic processing - Part 12: Particular requirements for infrared electroheating

IEC 60526:1978
Edition 2.0 (1978-01-01)
High-voltage cable plug and socket connections for medical X-ray equipment

IEC 60526:1978/COR1:2010
Edition 2.0 (2010-04-22)
Corrigendum 1 - High-voltage cable plug and socket connections for medical X-ray equipment

IEC 60529:1989+AMD1:1999 CSV
Edition 2.1 (2001-02-27)
Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989+AMD1:1999 CSV/COR1:2003
Edition 2.1 (2003-01-21)
Corrigendum 1 - Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989+AMD1:1999 CSV/COR2:2007
Edition 2.1 (2007-10-09)
Corrigendum 2 - Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989+AMD1:1999 CSV/COR3:2009
Edition 2.1 (2009-10-13)
Corrigendum 3 - Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989
Edition 2.0 (1989-11-30)
Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989/AMD1:1999
Edition 2.0 (1999-11-16)
Amendment 1 - Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989/AMD2:2013
Edition 2.0 (2013-08-29)
Amendment 2 - Degrees of protection provided by enclosures (IP Code)

IEC 60529:1989/AMD2:2013/COR1:2019
Edition 2.0 (2019-01-16)
Corrigendum 1 - Amendment 2 - Degrees of protection provided by enclosures (IP Code)

IEC 60554-1:1977
Edition 1.0 (1977-01-01)
Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

IEC 60554-1:1977/AMD1:1983
Edition 1.0 (1983-01-01)
Amendment 1 - Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements

IEC 60554-2:2001
Edition 2.0 (2001-11-08)
Cellulosic papers for electrical purposes - Part 2: Methods of test

IEC 60554-3-1:1979
Edition 1.0 (1979-01-01)
Specification for cellulosic papers for electrical purposes. Part 3-1: Specifications for individual materials. General purpose electrical paper

IEC 60554-3-2:1983
Edition 1.0 (1983-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper

IEC 60554-3-3:1980
Edition 1.0 (1980-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper

IEC 60554-3-4:1979
Edition 1.0 (1979-01-01)
Specification for cellulosic papers for electrical purposes. Part 3-4: Specifications for individual materials. Electrolytic capacitor paper

IEC 60554-3-5:1984
Edition 1.0 (1984-01-01)
Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers

IEC 60560:1977
Edition 1.0 (1977-01-01)
Definitions and terminology of brush-holders for electrical machines

IEC 60570:2003
Edition 4.0 (2003-01-30)
Electrical supply track systems for luminaires

IEC 60570:2003/AMD1:2017
Edition 4.0 (2017-04-05)
Amendment 1 - Electrical supply track systems for luminaires

IEC 60570:2003/AMD2:2019
Edition 4.0 (2019-12-11)
Amendment 2 - Electrical supply track systems for luminaires

IEC 60580:2019
Edition 3.0 (2019-11-12)
Medical electrical equipment - Dose area product meters

IEC 60598-1:2020
Edition 9.0 (2020-08-17)
Luminaires - Part 1: General requirements and tests

IEC 60598-2-1:2020
Edition 2.0 (2020-01-28)
Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires

IEC 60598-2-2:2011
Edition 3.0 (2011-11-08)
Luminaires - Part 2-2: Particular requirements - Recessed luminaires

IEC 60598-2-3:2002+AMD1:2011 CSV
Edition 3.1 (2011-11-17)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-3:2002
Edition 3.0 (2002-12-04)
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-3:2002/AMD1:2011
Edition 3.0 (2011-04-14)
Amendment 1 - Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-4:2017
Edition 3.0 (2017-04-21)
Luminaires - Part 2-4: Particular requirements - Portable general purpose luminaires

IEC 60598-2-5:2015
Edition 3.0 (2015-08-06)
Luminaires - Part 2-5: Particular requirements - Floodlights

IEC 60598-2-8:2013
Edition 3.0 (2013-04-29)
Luminaires - Part 2-8: Particular requirements - Handlamps

IEC 60598-2-10:2003
Edition 2.0 (2003-05-19)
Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

IEC 60598-2-11:2013
Edition 2.0 (2013-05-16)
Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

IEC 60598-2-12:2013
Edition 2.0 (2013-04-29)
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

IEC 60598-2-13:2006+AMD1:2011 CSV
Edition 1.1 (2012-02-10)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-13:2006
Edition 1.0 (2006-06-13)
Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-13:2006/AMD1:2011
Edition 1.0 (2011-12-07)
Amendment 1 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-13:2006/AMD2:2016
Edition 1.0 (2016-05-25)
Amendment 2 - Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-14:2009
Edition 1.0 (2009-02-05)
Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

IEC 60598-2-17:2017
Edition 2.0 (2017-05-30)
Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor)

IEC 60598-2-18:1993
Edition 2.0 (1993-04-26)
Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

IEC 60598-2-18:1993/COR1:2013
Edition 2.0 (2013-03-21)
Corrigendum 1 - Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

IEC 60598-2-18:1993/AMD1:2011
Edition 2.0 (2011-12-14)
Amendment 1 - Luminaires - Part 2-18: Particular requirements - Luminaires for swimming pools and similar applications

IEC 60598-2-19:1981
Edition 1.0 (1981-01-01)
Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-19:1981/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-19:1981/AMD2:1997
Edition 1.0 (1997-12-11)
Amendment 2 - Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-20:2022
Edition 5.0 (2022-01-31)
Luminaires - Part 2-20: Particular requirements - Lighting chains

IEC 60598-2-21:2014
Edition 1.0 (2014-11-25)
Luminaires - Part 2-21: Particular requirements - Rope lights

IEC 60598-2-21:2014/COR1:2016
Edition 1.0 (2016-12-16)
Corrigendum 1 - Luminaires - Part 2-21: Particular requirements - Rope lights

IEC 60598-2-22:2021
Edition 5.0 (2021-12-06)
Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

IEC 60598-2-23:2020
Edition 2.0 (2020-07-20)
Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources

IEC 60598-2-24:2013
Edition 2.0 (2013-06-19)
Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

IEC 60598-2-25:1994
Edition 1.0 (1994-08-17)
Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

IEC 60598-2-25:1994/AMD1:2004
Edition 1.0 (2004-09-28)
Amendment 1 - Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings

IEC 60601-1:2005
Edition 3.0 (2005-12-15)
Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/ISH1:2008
Edition 3.0 (2008-04-25)
Interpretation sheet 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/ISH2:2009
Edition 3.0 (2009-01-28)
Interpretation sheet 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/ISH3:2013
Edition 3.0 (2013-05-22)
Interpretation sheet 3 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/COR1:2006
Edition 3.0 (2006-12-12)
Corrigendum 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/COR2:2007
Edition 3.0 (2007-12-07)
Corrigendum 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/AMD1:2012
Edition 3.0 (2012-07-13)
Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/AMD1:2012/ISH1:2021
Edition 3.0 (2021-03-12)
Interpretation Sheet 1 - Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/AMD1:2012/COR1:2014
Edition 3.0 (2014-07-22)
Corrigendum 1 - Amendment 1 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1:2005/AMD2:2020
Edition 3.0 (2020-08-20)
Amendment 2 - Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1-2:2014
Edition 4.0 (2014-02-25)
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

IEC 60601-1-2:2014/AMD1:2020
Edition 4.0 (2020-09-01)
Amendment 1 - Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

IEC 60601-1-3:2008
Edition 2.0 (2008-01-22)
Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

IEC 60601-1-3:2008/AMD1:2013
Edition 2.0 (2013-04-19)
Amendment 1 - Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

IEC 60601-1-3:2008/AMD2:2021
Edition 2.0 (2021-01-26)
Amendment 2 - Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

IEC 60601-1-6:2010
Edition 3.0 (2010-01-27)
Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

IEC 60601-1-6:2010/AMD1:2013
Edition 3.0 (2013-10-29)
Amendment 1 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

IEC 60601-1-6:2010/AMD2:2020
Edition 3.0 (2020-07-22)
Amendment 2 - Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

IEC 60601-1-8:2006
Edition 2.0 (2006-10-25)
Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

IEC 60601-1-8:2006/AMD1:2012
Edition 2.0 (2012-11-28)
Amendment 1 - Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

IEC 60601-1-8:2006/AMD2:2020
Edition 2.0 (2020-07-23)
Amendment 2 - Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

IEC 60601-1-9:2007
Edition 1.0 (2007-07-10)
Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 60601-1-9:2007/AMD1:2013
Edition 1.0 (2013-06-18)
Amendment 1 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 60601-1-9:2007/AMD2:2020
Edition 1.0 (2020-07-22)
Amendment 2 - Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design

IEC 60601-1-10:2007
Edition 1.0 (2007-11-21)
Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

IEC 60601-1-10:2007/AMD1:2013
Edition 1.0 (2013-11-27)
Amendment 1 - Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

IEC 60601-1-10:2007/AMD2:2020
Edition 1.0 (2020-07-22)
Amendment 2 - Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers

IEC 60601-1-11:2015
Edition 2.0 (2015-01-20)
Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

IEC 60601-1-11:2015/AMD1:2020
Edition 2.0 (2020-07-22)
Amendment 1 - Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment

IEC 60601-1-12:2014
Edition 1.0 (2014-06-19)
Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment

IEC 60601-1-12:2014/AMD1:2020
Edition 1.0 (2020-07-22)
Amendment 1 - Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment

IEC 60601-2-1:2020
Edition 4.0 (2020-10-28)
Medical electrical equipment - Part 2-1: Particular requirements for the basic safety and essential performance of electron accelerators in the range 1 MeV to 50 MeV

IEC 60601-2-2:2017
Edition 6.0 (2017-03-31)
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories

IEC 60601-2-3:2012
Edition 3.0 (2012-04-20)
Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment

IEC 60601-2-3:2012/AMD1:2016
Edition 3.0 (2016-04-29)
Amendment 1 - Medical electrical equipment - Part 2-3: Particular requirements for the basic safety and essential performance of short-wave therapy equipment

IEC 60601-2-4:2010
Edition 3.0 (2010-12-08)
Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators

IEC 60601-2-4:2010/AMD1:2018
Edition 3.0 (2018-02-28)
Amendment 1 - Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators

IEC 60601-2-5:2009
Edition 3.0 (2009-07-30)
Medical electrical equipment - Part 2-5: Particular requirements for the basic safety and essential performance of ultrasonic physiotherapy equipment

IEC 60601-2-6:2012
Edition 2.0 (2012-04-27)
Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment

IEC 60601-2-6:2012/AMD1:2016
Edition 2.0 (2016-04-29)
Amendment 1 - Medical electrical equipment - Part 2-6: Particular requirements for the basic safety and essential performance of microwave therapy equipment

IEC 60601-2-8:2010
Edition 2.0 (2010-11-10)
Medical electrical equipment - Part 2-8: Particular requirements for basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV

IEC 60601-2-8:2010/AMD1:2015
Edition 2.0 (2015-09-29)
Amendment 1 - Medical electrical equipment - Part 2-8: Particular requirements for the basic safety and essential performance of therapeutic X-ray equipment operating in the range 10 kV to 1 MV

IEC 60601-2-10:2012
Edition 2.0 (2012-06-27)
Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators

IEC 60601-2-10:2012/AMD1:2016
Edition 2.0 (2016-04-29)
Amendment 1 - Medical electrical equipment - Part 2-10: Particular requirements for the basic safety and essential performance of nerve and muscle stimulators

IEC 60601-2-11:2013
Edition 3.0 (2013-01-16)
Medical electrical equipment - Part 2-11: Particular requirements for the basic safety and essential performance of gamma beam therapy equipment

IEC 60601-2-16:2018
Edition 5.0 (2018-04-20)
Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment

IEC 60601-2-17:2013
Edition 3.0 (2013-11-27)
Medical electrical equipment - Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment

IEC 60601-2-18:2009
Edition 3.0 (2009-08-12)
Medical electrical equipment - Part 2-18: Particular requirements for the basic safety and essential performance of endoscopic equipment

IEC 60601-2-19:2020
Edition 3.0 (2020-09-02)
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators

IEC 60601-2-20:2020
Edition 3.0 (2020-09-02)
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators

IEC 60601-2-21:2020
Edition 3.0 (2020-09-29)
Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and essential performance of infant radiant warmers

IEC 60601-2-22:2019
Edition 4.0 (2019-11-20)
Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment

IEC 60601-2-23:2011
Edition 3.0 (2011-02-25)
Medical electrical equipment - Part 2-23: Particular requirements for the basic safety and essential performance of transcutaneous partial pressure monitoring equipment

IEC 60601-2-24:2012
Edition 2.0 (2012-10-19)
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers

IEC 60601-2-25:2011
Edition 2.0 (2011-10-19)
Medical electrical equipment - Part 2-25: Particular requirements for the basic safety and essential performance of electrocardiographs

IEC 60601-2-27:2011
Edition 3.0 (2011-03-30)
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment

IEC 60601-2-27:2011/COR1:2012
Edition 3.0 (2012-05-16)
Corrigendum 1 - Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment

IEC 60601-2-28:2017
Edition 3.0 (2017-06-16)
Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and essential performance of X-ray tube assemblies for medical diagnosis

IEC 60601-2-29:2008
Edition 3.0 (2008-06-11)
Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and essential performance of radiotherapy simulators

IEC 60601-2-31:2020
Edition 3.0 (2020-01-17)
Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source

IEC 60601-2-33:2010
Edition 3.0 (2010-03-10)
Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-33:2010/COR1:2012
Edition 3.0 (2012-03-05)
Corrigendum 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-33:2010/COR2:2016
Edition 3.0 (2016-02-18)
Corrigendum 2 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-33:2010/AMD1:2013
Edition 3.0 (2013-04-23)
Amendment 1 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-33:2010/AMD2:2015
Edition 3.0 (2015-06-18)
Amendment 2 - Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis

IEC 60601-2-34:2011
Edition 3.0 (2011-05-19)
Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment

IEC 60601-2-35:2020
Edition 2.0 (2020-09-21)
Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use

IEC 60601-2-36:2014
Edition 2.0 (2014-04-10)
Medical electrical equipment - Part 2-36: Particular requirements for the basic safety and essential performance of equipment for extracorporeally induced lithotripsy

IEC 60601-2-37:2007
Edition 2.0 (2007-08-09)
Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

IEC 60601-2-37:2007/AMD1:2015
Edition 2.0 (2015-06-08)
Amendment 1 - Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

IEC 60601-2-39:2018
Edition 3.0 (2018-04-06)
Medical electrical equipment - Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment

IEC 60601-2-40:2016
Edition 2.0 (2016-08-18)
Medical electrical equipment - Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment

IEC 60601-2-41:2021
Edition 3.0 (2021-09-03)
Medical electrical equipment - Part 2-41: Particular requirements for the basic safety and essential performance of surgical luminaires and luminaires for diagnosis

IEC 60601-2-43:2010
Edition 2.0 (2010-03-25)
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures

IEC 60601-2-43:2010/AMD1:2017
Edition 2.0 (2017-05-31)
Amendment 1 - Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures

IEC 60601-2-43:2010/AMD2:2019
Edition 2.0 (2019-10-16)
Amendment 2 - Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures

IEC 60601-2-44:2009
Edition 3.0 (2009-02-25)
Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography

IEC 60601-2-44:2009/COR1:2010
Edition 3.0 (2010-05-19)
Corrigendum 1 - Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography

IEC 60601-2-44:2009/AMD1:2012
Edition 3.0 (2012-08-30)
Amendment 1 - Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography

IEC 60601-2-44:2009/AMD2:2016
Edition 3.0 (2016-03-31)
Amendment 2 - Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography

IEC 60601-2-45:2011
Edition 3.0 (2011-02-10)
Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices

IEC 60601-2-45:2011/AMD1:2015
Edition 3.0 (2015-06-18)
Amendment 1 - Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices

IEC 60601-2-46:2016
Edition 3.0 (2016-08-10)
Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables

IEC 60601-2-47:2012
Edition 2.0 (2012-02-16)
Medical electrical equipment - Part 2-47: Particular requirements for the basic safety and essential performance of ambulatory electrocardiographic systems

IEC 60601-2-50:2020
Edition 3.0 (2020-09-02)
Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment

IEC 60601-2-52:2009
Edition 1.0 (2009-12-10)
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

IEC 60601-2-52:2009/COR1:2010
Edition 1.0 (2010-09-22)
Corrigendum 1 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

IEC 60601-2-52:2009/AMD1:2015
Edition 1.0 (2015-03-18)
Amendment 1 - Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

IEC 60601-2-54:2009
Edition 1.0 (2009-06-29)
Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

IEC 60601-2-54:2009/COR1:2010
Edition 1.0 (2010-03-10)
Corrigendum 1 - Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

IEC 60601-2-54:2009/COR2:2011
Edition 1.0 (2011-06-10)
Corrigendum 2 - Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

IEC 60601-2-54:2009/AMD1:2015
Edition 1.0 (2015-04-17)
Amendment 1 - Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

IEC 60601-2-54:2009/AMD2:2018
Edition 1.0 (2018-06-29)
Amendment 2 - Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy

IEC 60601-2-57:2011
Edition 1.0 (2011-01-31)
Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use

IEC 60601-2-62:2013
Edition 1.0 (2013-07-09)
Medical electrical equipment - Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment

IEC 60601-2-63:2012
Edition 1.0 (2012-09-19)
Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment

IEC 60601-2-63:2012/AMD1:2017
Edition 1.0 (2017-07-07)
Amendment 1 - Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment

IEC 60601-2-63:2012/AMD2:2021
Edition 1.0 (2021-05-12)
Amendment 2 - Medical electrical equipment - Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment

IEC 60601-2-64:2014
Edition 1.0 (2014-09-03)
Medical electrical equipment - Part 2-64: Particular requirements for the basic safety and essential performance of light ion beam medical electrical equipment

IEC 60601-2-65:2012
Edition 1.0 (2012-09-19)
Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment

IEC 60601-2-65:2012/AMD1:2017
Edition 1.0 (2017-05-17)
Amendment 1 - Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment

IEC 60601-2-65:2012/AMD2:2021
Edition 1.0 (2021-05-03)
Amendment 2 - Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral X-ray equipment

IEC 60601-2-68:2014
Edition 1.0 (2014-09-04)
Medical electrical equipment - Part 2-68: Particular requirements for the basic safety and essential performance of X-ray-based image-guided radiotherapy equipment for use with electron accelerators, light ion beam therapy equipment and radionuclide beam therapy equipment

IEC 60601-2-75:2017
Edition 1.0 (2017-05-30)
Medical electrical equipment - Part 2-75: Particular requirements for the basic safety and essential performance of photodynamic therapy and photodynamic diagnosis equipment

IEC 60601-2-76:2018
Edition 1.0 (2018-04-10)
Medical electrical equipment - Part 2-76: Particular requirements for the basic safety and essential performance of low energy ionized gas haemostasis equipment

IEC 60601-2-83:2019
Edition 1.0 (2019-05-22)
Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and essential performance of home light therapy equipment

IEC TR 60601-4-1:2017
Edition 1.0 (2017-05-22)
Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy

IEC TR 60601-4-2:2016
Edition 1.0 (2016-05-13)
Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems

IEC TR 60601-4-3:2018
Edition 2.0 (2018-12-13)
Medical electrical equipment - Part 4-3: Guidance and interpretation - Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements

IEC TR 60601-4-4:2017
Edition 1.0 (2017-08-17)
Medical electrical equipment - Part 4-4: Guidance and interpretation - Guidance for writers of particular standards when creating alarm system-related requirements

IEC 60603-1:1991
Edition 2.0 (1991-06-28)
Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

IEC 60603-1:1991/AMD1:1992
Edition 2.0 (1992-06-15)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

IEC 60603-2:1995
Edition 3.0 (1995-09-22)
Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

IEC 60603-2:1995/AMD1:2000
Edition 3.0 (2000-08-18)
Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

IEC 60603-3:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing

IEC 60603-4:1987
Edition 1.0 (1987-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

IEC 60603-5:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing

IEC 60603-6:1987
Edition 1.0 (1987-01-01)
Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness

IEC 60603-7-1:2011
Edition 3.0 (2011-04-07)
Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

IEC 60603-7-2:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

IEC 60603-7-3:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

IEC 60603-7-4:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

IEC 60603-7-5:2010
Edition 2.0 (2010-04-26)
Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

IEC 60603-7-7:2010
Edition 3.0 (2010-05-31)
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

IEC 60603-7-41:2010
Edition 1.0 (2010-03-10)
Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

IEC 60603-7-51:2010
Edition 1.0 (2010-03-10)
Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

IEC 60603-7-71:2010
Edition 1.0 (2010-06-28)
Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

IEC 60603-7-81:2015
Edition 1.0 (2015-12-16)
Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

IEC 60603-7-81:2015/COR1:2017
Edition 1.0 (2017-06-30)
Corrigendum 1 - Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

IEC 60603-7-82:2016
Edition 1.0 (2016-08-25)
Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

IEC 60603-8:1990
Edition 1.0 (1990-12-01)
Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm

IEC 60603-11:1992
Edition 1.0 (1992-03-15)
Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

IEC 60603-12:1992
Edition 1.0 (1992-06-25)
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

IEC 60603-13:1995
Edition 1.0 (1995-01-25)
Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)

IEC 60603-14:1998
Edition 1.0 (1998-02-26)
Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment

IEC 60613:2010
Edition 3.0 (2010-01-27)
Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis

IEC 60626-1:2009
Edition 3.0 (2009-08-31)
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements

IEC 60626-2:2009
Edition 3.0 (2009-09-29)
Combined flexible materials for electrical insulation - Part 2: Methods of test

IEC 60626-3:2008
Edition 3.0 (2008-07-21)
Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

IEC 60626-3:2008/AMD1:2012
Edition 3.0 (2012-07-17)
Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials

IEC 60627:2013
Edition 3.0 (2013-07-09)
Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic anti-scatter grids

IEC 60630:2005 CSV
Edition 2.5 (2005-04-25)
Maximum lamp outlines for incandescent lamps

IEC 60630:2002 CSV
Edition 2.4 (2002-12-19)
Maximum lamp outlines for incandescent lamps

IEC 60630:1994+AMD1:1997+AMD2:1998+AMD3:1999 CSV
Edition 2.3 (2001-05-25)
Maximum lamp outlines for incandescent lamps

IEC 60630:1994
Edition 2.0 (1994-09-09)
Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD1:1997
Edition 2.0 (1997-06-05)
Amendment 1 - Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD2:1998
Edition 2.0 (1998-02-27)
Amendment 2 - Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD3:1999
Edition 2.0 (1999-07-09)
Amendment 3 - Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD4:2002
Edition 2.0 (2002-11-28)
Amendment 4 - Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD5:2005
Edition 2.0 (2005-03-17)
Amendment 5 - Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD6:2009
Edition 2.0 (2009-05-19)
Amendment 6 - Maximum lamp outlines for incandescent lamps

IEC 60630:1994/AMD7:2014
Edition 2.0 (2014-06-27)
Amendment 7 - Maximum lamp outlines for incandescent lamps

IEC 60633:2019
Edition 3.0 (2019-04-25)
High-voltage direct current (HVDC) transmission - Vocabulary

IEC 60633:2019/COR1:2020
Edition 3.0 (2020-02-26)
Corrigendum 1 - High-voltage direct current (HVDC) transmission - Vocabulary

IEC 60641-1:2007
Edition 2.0 (2007-11-14)
Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements

IEC 60641-2:2004
Edition 2.0 (2004-06-23)
Pressboard and presspaper for electrical purposes - Part 2: Methods of tests

IEC 60641-3-1:2008
Edition 2.0 (2008-07-21)
Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1

IEC 60641-3-2:2007
Edition 2.0 (2007-11-14)
Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1

IEC 60645-6:2022
Edition 2.0 (2022-03-10)
Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions

IEC 60662:2011
Edition 2.0 (2011-02-23)
High-pressure sodium vapour lamps - Performance specifications

IEC 60664-1:2020
Edition 3.0 (2020-05-26)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

IEC 60664-1:2020/COR1:2020
Edition 3.0 (2020-10-27)
Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

IEC TR 60664-2-1:2011
Edition 2.0 (2011-01-31)
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

IEC TR 60664-2-1:2011/COR1:2011
Edition 2.0 (2011-10-24)
Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

IEC TR 60664-2-2:2002
Edition 1.0 (2002-01-22)
Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide

IEC 60664-3:2016
Edition 3.0 (2016-11-04)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

IEC 60664-4:2005
Edition 2.0 (2005-09-15)
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress

IEC 60667-1:2020
Edition 2.0 (2020-04-09)
Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements

IEC 60667-2:2020
Edition 2.0 (2020-05-13)
Vulcanized fibre for electrical purposes - Part 2: Methods of test

IEC 60667-3-1:2020
Edition 2.0 (2020-03-25)
Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets

IEC 60672-1:1995
Edition 2.0 (1995-06-27)
Ceramic and glass insulating materials - Part 1: Definitions and classification

IEC 60672-2:1999
Edition 2.0 (1999-12-22)
Ceramic and glass insulating materials - Part 2: Methods of test

IEC 60672-3:1997
Edition 2.0 (1997-10-17)
Ceramic and glass-insulating materials - Part 3: Specifications for individual materials

IEC 60674-1:1980
Edition 1.0 (1980-01-01)
Specification for plastic films for electrical purposes. Part 1: Definitions and general requirements

IEC 60674-2:2016
Edition 2.0 (2016-11-18)
Specification for plastic films for electrical purposes - Part 2: Methods of test

IEC 60674-2:2016/COR1:2017
Edition 2.0 (2017-12-19)
Corrigendum 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test

IEC 60674-2:2016/AMD1:2019
Edition 2.0 (2019-01-24)
Amendment 1 - Specification for plastic films for electrical purposes - Part 2: Methods of test

IEC 60674-3-1:2021
Edition 2.0 (2021-08-25)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors

IEC 60674-3-2:2019
Edition 2.0 (2019-01-16)
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation

IEC 60674-3-3:1992
Edition 1.0 (1992-04-30)
Specification for plastic films for electrical purposes - Part 3:Specifications for individual materials - Sheet 3: Requirements forpolycarbonate (PC) films used for electrical insulation

IEC 60674-3-4:2022
Edition 2.0 (2022-06-22)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4: Polyimide films used for electrical insulation

IEC 60674-3-7:1992
Edition 1.0 (1992-04-30)
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation

IEC 60674-3-8:2011
Edition 1.0 (2011-07-13)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

IEC 60674-3-8:2011/AMD1:2016
Edition 1.0 (2016-11-22)
Amendment 1 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

IEC 60682:1980
Edition 1.0 (1980-01-01)
Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

IEC 60682:1980/AMD1:1987
Edition 1.0 (1987-01-01)
Amendment 1 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

IEC 60682:1980/AMD2:1997
Edition 1.0 (1997-04-23)
Amendment 2 - Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

IEC 60684-1:2003
Edition 2.0 (2003-04-28)
Flexible insulating sleeving - Part 1: Definitions and general requirements

IEC 60684-2:2011
Edition 3.0 (2011-08-10)
Flexible insulating sleeving - Part 2: Methods of test

IEC 60684-3-100:2001
Edition 2.0 (2001-07-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving

IEC 60684-3-116:2010
Edition 3.0 (2010-06-16)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose

IEC 60684-3-121:2001
Edition 2.0 (2001-07-18)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving

IEC 60684-3-136:1997
Edition 1.0 (1997-12-22)
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

IEC 60684-3-136:1997/COR1:1999
Edition 1.0 (1999-02-19)
Corrigendum 1 - Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose

IEC 60684-3-145:2001
Edition 1.0 (2001-07-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving

IEC 60684-3-151:1998
Edition 1.0 (1998-06-11)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 151: Extruded PVC/nitrile rubber - General purpose

IEC 60684-3-165:2004
Edition 1.0 (2004-05-11)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving

IEC 60684-3-205:2011
Edition 1.0 (2011-06-21)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1

IEC 60684-3-209:2010
Edition 3.0 (2010-06-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded

IEC 60684-3-211:2007
Edition 3.0 (2007-02-15)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1

IEC 60684-3-212:2005
Edition 2.0 (2005-11-21)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings

IEC 60684-3-214:2019
Edition 4.0 (2019-08-08)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall

IEC 60684-3-216:2019
Edition 2.0 (2019-08-08)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving

IEC 60684-3-228:2004
Edition 2.0 (2004-05-11)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

IEC 60684-3-229:2003
Edition 1.0 (2003-02-17)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1

IEC 60684-3-233:2006
Edition 2.0 (2006-01-17)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1

IEC 60684-3-240:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving

IEC 60684-3-246:2007
Edition 3.0 (2007-02-15)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded

IEC 60684-3-247:2019
Edition 2.0 (2019-08-08)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall

IEC 60684-3-248:2007
Edition 1.0 (2007-02-16)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1

IEC 60684-3-271:2011
Edition 3.0 (2011-06-21)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

IEC 60684-3-280:2019
Edition 2.0 (2019-08-20)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

IEC 60684-3-281:2010
Edition 1.0 (2010-06-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive

IEC 60684-3-282:2010
Edition 1.0 (2010-06-10)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control

IEC 60684-3-283:2019
Edition 2.0 (2019-08-20)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation

IEC 60684-3-284:2014
Edition 1.0 (2014-10-23)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications

IEC 60684-3-285:2014
Edition 1.0 (2014-10-17)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation

IEC 60684-3-300:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated

IEC 60684-3-320:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated

IEC 60684-3-340:2003
Edition 2.0 (2003-04-29)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving

IEC 60684-3-343:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated

IEC 60684-3-400:2002
Edition 2.0 (2002-06-12)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating

IEC 60684-3-403:2002
Edition 2.0 (2002-05-17)
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating

IEC 60684-3-406:2003
Edition 2.0 (2003-07-29)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating

IEC 60684-3-409:1999
Edition 1.0 (1999-06-30)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating

IEC 60684-3-420:2002
Edition 2.0 (2002-05-17)
Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating

IEC 60695-1-10:2016
Edition 2.0 (2016-11-18)
Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines

IEC 60695-1-11:2014
Edition 2.0 (2014-10-08)
Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment

IEC 60695-1-12:2015
Edition 1.0 (2015-01-20)
Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering

IEC TS 60695-1-14:2017
Edition 1.0 (2017-12-07)
Fire hazard testing - Part 1-14: Guidance on the different levels of power and energy related to the probability of ignition and fire in low voltage electrotechnical products

IEC 60695-1-20:2016
Edition 1.0 (2016-01-27)
Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

IEC 60695-1-21:2016
Edition 1.0 (2016-09-07)
Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods

IEC 60695-1-30:2017
Edition 3.0 (2017-02-21)
Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines

IEC 60695-1-40:2013
Edition 1.0 (2013-11-19)
Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids

IEC 60695-2-10:2021
Edition 3.0 (2021-10-28)
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

IEC 60695-2-11:2021
Edition 3.0 (2021-10-28)
Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end products (GWEPT)

IEC 60695-2-12:2021
Edition 3.0 (2021-10-08)
Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

IEC 60695-2-13:2021
Edition 3.0 (2021-08-24)
Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

IEC 60695-5-1:2021
Edition 3.0 (2021-10-28)
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance

IEC TS 60695-5-2:2021
Edition 3.0 (2021-06-03)
Fire hazard testing - Part 5-2: Corrosion damage effects of fire effluent - Summary and relevance of test methods

IEC 60695-6-1:2021
Edition 3.0 (2021-08-05)
Fire hazard testing - Part 6-1: Smoke obscuration - General guidance

IEC 60695-6-2:2018
Edition 2.0 (2018-06-05)
Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods

IEC 60695-7-1:2010
Edition 3.0 (2010-06-28)
Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance

IEC 60695-7-2:2021
Edition 2.0 (2021-10-28)
Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods

IEC 60695-7-3:2011
Edition 1.0 (2011-08-30)
Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results

IEC 60695-8-1:2016
Edition 3.0 (2016-11-15)
Fire hazard testing - Part 8-1: Heat release - General guidance

IEC 60695-8-2:2016
Edition 1.0 (2016-11-16)
Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods

IEC 60695-9-1:2013
Edition 3.0 (2013-04-29)
Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

IEC 60695-9-2:2021
Edition 2.0 (2021-08-25)
Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

IEC 60695-10-2:2014
Edition 3.0 (2014-02-19)
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

IEC 60695-10-3:2016
Edition 2.0 (2016-09-07)
Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

IEC 60695-11-2:2017
Edition 3.0 (2017-06-08)
Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

IEC 60695-11-3:2012
Edition 1.0 (2012-08-13)
Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods

IEC 60695-11-4:2011
Edition 1.0 (2011-09-27)
Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method

IEC 60695-11-5:2016
Edition 2.0 (2016-12-06)
Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance

IEC 60695-11-10:2013
Edition 2.0 (2013-05-21)
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

IEC 60695-11-10:2013/COR1:2014
Edition 2.0 (2014-09-03)
Corrigendum 1 - Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

IEC 60695-11-20:2015
Edition 2.0 (2015-04-22)
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

IEC 60695-11-20:2015/COR1:2016
Edition 2.0 (2016-01-27)
Corrigendum 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

IEC TS 60695-11-21:2005
Edition 1.0 (2005-05-04)
Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials

IEC TR 60695-11-30:2001
Edition 1.0 (2001-08-28)
Fire hazard testing - Part 11-30: Test flames - History and development from 1979 to 1999

IEC TS 60695-11-40:2021
Edition 2.0 (2021-06-24)
Fire hazard testing - Part 11-40: Test flames - Confirmatory tests - Guidance

IEC 60700-1:2015
Edition 2.0 (2015-07-28)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

IEC 60700-1:2015/COR1:2017
Edition 2.0 (2017-01-25)
Corrigendum 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

IEC 60700-1:2015/AMD1:2021
Edition 2.0 (2021-09-15)
Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

IEC 60700-2:2016
Edition 1.0 (2016-06-17)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

IEC 60700-2:2016/COR1:2017
Edition 1.0 (2017-06-22)
Corrigendum 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

IEC 60700-2:2016/AMD1:2021
Edition 1.0 (2021-08-23)
Amendment 1 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology

IEC 60704-2-2:2009
Edition 2.0 (2009-07-23)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters

IEC 60704-2-3:2017
Edition 3.0 (2017-04-10)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3: Particular requirements for dishwashers

IEC 60704-2-5:2005
Edition 2.0 (2005-07-06)
Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters

IEC 60704-2-5:2005/AMD1:2014
Edition 2.0 (2014-10-17)
Amendment 1 - Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters

IEC 60715:2017
Edition 2.0 (2017-07-28)
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

IEC 60731:2011
Edition 3.0 (2011-02-25)
Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy

IEC 60731:2011/AMD1:2016
Edition 3.0 (2016-04-08)
Amendment 1 - Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy

IEC 60747-2:2016
Edition 3.0 (2016-04-13)
Semiconductor devices - Part 2: Discrete devices - Rectifier diodes

IEC 60747-3:2013
Edition 2.0 (2013-07-09)
Semiconductor devices - Part 3: Discrete devices: Signal, switching and regulator diodes

IEC 60747-4:2007
Edition 2.0 (2007-08-23)
Semiconductor devices - Discrete devices - Part 4: Microwave diodes and transistors

IEC 60747-4:2007/AMD1:2017
Edition 2.0 (2017-01-30)
Amendment 1 - Semiconductor devices - Discrete devices - Part 4: Microwave diodes and transistors

IEC 60747-5-4:2022
Edition 2.0 (2022-04-27)
Semiconductor devices - Part 5-4: Optoelectronic devices - Semiconductor lasers

IEC 60747-5-5:2020
Edition 2.0 (2020-07-20)
Semiconductor devices - Part 5-5: Optoelectronic devices - Photocouplers

IEC 60747-5-6:2021
Edition 2.0 (2021-07-06)
Semiconductor devices - Part 5-6: Optoelectronic devices - Light emitting diodes

IEC 60747-5-7:2016
Edition 1.0 (2016-02-23)
Semiconductor devices - Part 5-7: Optoelectronic devices - Photodiodes and phototransistors

IEC 60747-5-8:2019
Edition 1.0 (2019-11-13)
Semiconductor devices - Part 5-8: Optoelectronic devices - Light emitting diodes - Test method of optoelectronic efficiencies of light emitting diodes

IEC 60747-5-9:2019
Edition 1.0 (2019-12-11)
Semiconductor devices - Part 5-9: Optoelectronic devices - Light emitting diodes - Test method of the internal quantum efficiency based on the temperature-dependent electroluminescence

IEC 60747-5-10:2019
Edition 1.0 (2019-12-11)
Semiconductor devices - Part 5-10: Optoelectronic devices - Light emitting diodes - Test method of the internal quantum efficiency based on the room-temperature reference point

IEC 60747-5-11:2019
Edition 1.0 (2019-12-11)
Semiconductor devices - Part 5-11: Optoelectronic devices - Light emitting diodes - Test method of radiative and nonradiative currents of light emitting diodes

IEC 60747-6:2016
Edition 3.0 (2016-04-13)
Semiconductor devices - Part 6: Discrete devices - Thyristors

IEC 60747-7:2010
Edition 3.0 (2010-12-16)
Semiconductor devices - Discrete devices - Part 7: Bipolar transistors

IEC 60747-7:2010/AMD1:2019
Edition 3.0 (2019-09-23)
Amendment 1 - Semiconductor devices - Discrete devices - Part 7: Bipolar transistors

IEC 60747-8:2010
Edition 3.0 (2010-12-15)
Semiconductor devices - Discrete devices - Part 8: Field-effect transistors

IEC 60747-8:2010/AMD1:2021
Edition 3.0 (2021-06-25)
Amendment 1 - Semiconductor devices - Discrete devices - Part 8: Field-effect transistors

IEC 60747-9:2019
Edition 3.0 (2019-11-13)
Semiconductor devices - Part 9: Discrete devices - Insulated-gate bipolar transistors (IGBTs)

IEC 60747-14-1:2010
Edition 2.0 (2010-01-21)
Semiconductor devices - Part 14-1: Semiconductor sensors - Generic specification for sensors

IEC 60747-14-2:2000
Edition 1.0 (2000-11-09)
Semiconductor devices - Part 14-2: Semiconductor sensors - Hall elements

IEC 60747-14-3:2009
Edition 2.0 (2009-04-29)
Semiconductor devices - Part 14-3: Semiconductor sensors - Pressure sensors

IEC 60747-14-4:2011
Edition 1.0 (2011-01-27)
Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers

IEC 60747-14-5:2010
Edition 1.0 (2010-02-11)
Semiconductor devices - Part 14-5: Semiconductor sensors - PN-junction semiconductor temperature sensor

IEC 60747-14-10:2019
Edition 1.0 (2019-11-13)
Semiconductor devices - Part 14-10: Semiconductor sensors - Performance evaluation methods for wearable glucose sensors

IEC 60747-15:2010
Edition 2.0 (2010-12-16)
Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices

IEC 60747-16-1:2001+AMD1:2007 CSV
Edition 1.1 (2007-03-13)
Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers

IEC 60747-16-1:2001
Edition 1.0 (2001-11-20)
Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers

IEC 60747-16-1:2001/AMD1:2007
Edition 1.0 (2007-01-26)
Amendment 1 - Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers

IEC 60747-16-1:2001/AMD2:2017
Edition 1.0 (2017-02-15)
Amendment 2 - Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers

IEC 60747-16-2:2001+AMD1:2007 CSV
Edition 1.1 (2008-01-22)
Semiconductor devices - Part 16-2: Microwave integrated circuits - Frequency prescalers

IEC 60747-16-2:2001
Edition 1.0 (2001-03-22)
Semiconductor devices - Part 16-2: Microwave integrated circuits - Frequency prescalers

IEC 60747-16-2:2001/AMD1:2007
Edition 1.0 (2007-10-18)
Amendment 1 - Semiconductor devices - Part 16-2: Microwave integrated circuits - Frequency prescalers

IEC 60747-16-3:2002+AMD1:2009 CSV
Edition 1.1 (2010-04-28)
Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters

IEC 60747-16-3:2002
Edition 1.0 (2002-05-07)
Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters

IEC 60747-16-3:2002/AMD1:2009
Edition 1.0 (2009-03-10)
Amendment 1 - Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters

IEC 60747-16-3:2002/AMD2:2017
Edition 1.0 (2017-08-16)
Amendment 2 - Semiconductor devices - Part 16-3: Microwave integrated circuits - Frequency converters

IEC 60747-16-4:2004+AMD1:2009 CSV
Edition 1.1 (2011-04-21)
Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches

IEC 60747-16-4:2004
Edition 1.0 (2004-07-28)
Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches

IEC 60747-16-4:2004/AMD1:2009
Edition 1.0 (2009-03-10)
Amendment 1 - Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches

IEC 60747-16-4:2004/AMD2:2017
Edition 1.0 (2017-08-16)
Amendment 2 - Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches

IEC 60747-16-5:2013
Edition 1.0 (2013-06-19)
Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators

IEC 60747-16-5:2013/AMD1:2020
Edition 1.0 (2020-07-14)
Amendment 1 - Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators

IEC 60747-16-5:2013/AMD1:2020/COR1:2020
Edition 1.0 (2020-09-03)
Corrigendum 1 - Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators

IEC 60747-16-6:2019
Edition 1.0 (2019-06-26)
Semiconductor devices - Part 16-6: Microwave integrated circuits - Frequency multipliers

IEC 60747-16-10:2004
Edition 1.0 (2004-07-15)
Semiconductor devices - Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits

IEC 60747-18-1:2019
Edition 1.0 (2019-05-20)
Semiconductor devices - Part 18-1: Semiconductor bio sensors - Test method and data analysis for calibration of lens-free CMOS photonic array sensors

IEC 60747-18-2:2020
Edition 1.0 (2020-02-07)
Semiconductor devices - Part 18-2: Semiconductor bio sensors - Evaluation process of lens-free CMOS photonic array sensor package modules

IEC 60747-18-3:2019
Edition 1.0 (2019-12-11)
Semiconductor devices - Part 18-3: Semiconductor bio sensors - Fluid flow characteristics of lens-free CMOS photonic array sensor package modules with fluidic system

IEC 60747-19-1:2019
Edition 1.0 (2019-11-22)
Semiconductor devices - Part 19-1: Smart sensors - Control scheme of smart sensors

IEC 60755:2017
Edition 1.0 (2017-10-26)
General safety requirements for residual current operated protective devices

IEC 60763-1:2010
Edition 2.0 (2010-08-06)
Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements

IEC 60763-2:2007
Edition 2.0 (2007-02-15)
Specification for laminated pressboard - Part 2: Methods of test

IEC 60763-3-1:2010
Edition 2.0 (2010-08-06)
Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2

IEC TR 60778:1984
Edition 1.0 (1984-01-01)
Brush-holders for slip-rings, Group R - type RA

IEC 60800:2021
Edition 4.0 (2021-11-22)
Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation

IEC 60806:1984
Edition 1.0 (1984-01-01)
Determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis

IEC 60807-1:1991
Edition 2.0 (1991-10-15)
Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality

IEC 60807-2:1992
Edition 2.0 (1992-11-13)
Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

IEC 60807-2:1992/AMD1:1996
Edition 2.0 (1996-01-30)
Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

IEC 60807-3:1990
Edition 1.0 (1990-07-18)
Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction

IEC 60807-6:1988
Edition 1.0 (1988-05-15)
Rectangular connectors for frequencies below 3 MHz - Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types

IEC 60807-7:1991
Edition 1.0 (1991-12-20)
Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality

IEC 60807-8:1992
Edition 1.0 (1992-01-31)
Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen

IEC 60807-9:1993
Edition 1.0 (1993-04-20)
Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors

IEC 60810:2017
Edition 5.0 (2017-09-25)
Lamps, light sources and LED packages for road vehicles - Performance requirements

IEC 60810:2017/AMD1:2019
Edition 5.0 (2019-04-08)
Amendment 1 - Lamps, light sources and LED packages for road vehicles - Performance requirements

IEC 60810:2017/AMD2:2022
Edition 5.0 (2022-04-28)
Amendment 2 - Lamps, light sources and LED packages for road vehicles - Performance requirements

IEC 60819-1:2009
Edition 3.0 (2009-09-29)
Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements

IEC 60819-2:2001
Edition 1.0 (2001-07-04)
Non-cellulosic papers for electrical purposes - Part 2: Methods of test

IEC 60819-3-1:2001
Edition 1.0 (2001-07-05)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper

IEC 60819-3-2:2001
Edition 1.0 (2001-07-04)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper

IEC 60819-3-3:2011
Edition 3.0 (2011-09-13)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers

IEC 60819-3-4:2013
Edition 2.0 (2013-12-12)
Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles

IEC 60825-1:2014
Edition 3.0 (2014-05-15)
Safety of laser products - Part 1: Equipment classification and requirements

IEC 60825-1:2014/ISH1:2017
Edition 3.0 (2017-12-19)
Interpretation sheet 1 - Safety of laser products - Part 1: Equipment classification and requirements

IEC 60825-1:2014/ISH2:2017
Edition 3.0 (2017-12-19)
Interpretation sheet 2 - Safety of laser products - Part 1: Equipment classification and requirements

IEC 60825-2:2021
Edition 4.0 (2021-03-16)
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCSs)

IEC 60825-2:2021/COR1:2021
Edition 4.0 (2021-06-23)
Corrigendum 1 - Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCSs)

IEC 60825-4:2006/AMD1:2008
Edition 2.0 (2008-06-11)
Amendment 1 - Safety of laser products - Part 4: Laser guards

IEC 60825-4:2006/AMD2:2011
Edition 2.0 (2011-03-29)
Amendment 2 - Safety of laser products - Part 4: Laser guards

IEC TR 60825-5:2019
Edition 3.0 (2019-11-14)
Safety of laser products - Part 5: Manufacturer's checklist for IEC 60825-1

IEC TR 60825-8:2006
Edition 2.0 (2006-12-08)
Safety of laser products - Part 8: Guidelines for the safe use of laser beams on humans

IEC TR 60825-13:2011
Edition 2.0 (2011-10-19)
Safety of laser products - Part 13: Measurements for classification of laser products

IEC 60838-1:2016
Edition 5.0 (2016-05-19)
Miscellaneous lampholders - Part 1: General requirements and tests

IEC 60838-1:2016/AMD1:2017
Edition 5.0 (2017-02-02)
Amendment 1 - Miscellaneous lampholders - Part 1: General requirements and tests

IEC 60838-1:2016/AMD2:2020
Edition 5.0 (2020-02-26)
Amendment 2 - Miscellaneous lampholders - Part 1: General requirements and tests

IEC 60838-2-1:1994
Edition 1.0 (1994-10-15)
Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

IEC 60838-2-1:1994/AMD1:1998
Edition 1.0 (1998-06-10)
Amendment 1 - Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

IEC 60838-2-1:1994/AMD2:2004
Edition 1.0 (2004-10-07)
Amendment 2 - Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14

IEC 60838-2-1:1994/AMD2:2004/COR1:2013
Edition 1.0 (2013-05-22)
Corrigendum 1 - Amendment 2 - Miscellaneous lampholders - Part 2-1: Particular requirements - Lampholders S14

IEC 60838-2-2:2006+AMD1:2012 CSV
Edition 1.1 (2012-04-27)
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

IEC 60838-2-2:2006
Edition 1.0 (2006-05-05)
Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

IEC 60838-2-2:2006/AMD1:2012
Edition 1.0 (2012-03-27)
Amendment 1 - Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

IEC 60838-2-3:2016
Edition 1.0 (2016-05-12)
Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps

IEC TR 60878:2015
Edition 3.0 (2015-09-22)
Graphical symbols for electrical equipment in medical practice

IEC TR 60882:1986
Edition 1.0 (1986-12-15)
Pre-heat requirements for starterless tubular fluorescent lamps

IEC TR 60887:2010
Edition 3.0 (2010-06-24)
Glass bulb designation system for lamps

IEC TR 60890:2014
Edition 2.0 (2014-05-07)
A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation

IEC 60893-1:2004
Edition 2.0 (2004-01-26)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements

IEC 60893-2:2003
Edition 2.0 (2003-06-24)
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test

IEC 60893-3-1:2012
Edition 3.0 (2012-07-24)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets

IEC 60893-3-2:2003+AMD1:2011 CSV
Edition 2.1 (2011-11-28)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins

IEC 60893-3-2:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins

IEC 60893-3-2:2003/AMD1:2011
Edition 2.0 (2011-05-27)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins

IEC 60893-3-3:2003+AMD1:2011 CSV
Edition 2.1 (2012-01-27)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

IEC 60893-3-3:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

IEC 60893-3-3:2003/AMD1:2011
Edition 2.0 (2011-11-28)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins

IEC 60893-3-4:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

IEC 60893-3-4:2003/COR1:2014
Edition 2.0 (2014-03-19)
Corrigendum 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

IEC 60893-3-4:2003/AMD1:2012
Edition 2.0 (2012-10-12)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins

IEC 60893-3-5:2003+AMD1:2009 CSV
Edition 2.1 (2009-10-13)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

IEC 60893-3-5:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

IEC 60893-3-5:2003/AMD1:2009
Edition 2.0 (2009-08-28)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins

IEC 60893-3-6:2003+AMD1:2009 CSV
Edition 2.1 (2009-11-10)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

IEC 60893-3-6:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

IEC 60893-3-6:2003/AMD1:2009
Edition 2.0 (2009-09-29)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

IEC 60893-3-6:2003/AMD2:2017
Edition 2.0 (2017-09-15)
Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins

IEC 60893-3-7:2003+AMD1:2009 CSV
Edition 2.1 (2009-11-10)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

IEC 60893-3-7:2003
Edition 2.0 (2003-11-14)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

IEC 60893-3-7:2003/AMD1:2009
Edition 2.0 (2009-09-29)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins

IEC TR 60893-4:2014
Edition 2.0 (2014-10-29)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values

IEC TR 60893-4:2014/AMD1:2017
Edition 2.0 (2017-09-22)
Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values

IEC 60898-1:2015
Edition 2.0 (2015-03-23)
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation