SDG 14 - Life below water

Conserve and sustainably use ocean, sea and marine resources

Reduce marine pollution

Coastal waters receive a variety of land-based pollutants, among them untreated sewage. This is a problem for the ecosystem and human health indirectly, through the consumption of fish and seafood as well as directly through skin contact. Among the three major sources of nutrient pollution are emissions from combustion. Ships burning heavy crude oil, as well as off-shore oil and gas operations can cause offshore marine pollution through ocean-based dumping. Often ship motors continue to run in ports to generate electricity for berthing, loading and unloading. Electrification can significantly reduce marine pollution.

11 IEC TC/SCs and 1 IEC CA System contribute to SDG 14.

iec_for_sdgs-cover.jpg

IEC for SDGs

IEC will undertake a campaign to help the IEC community, as well as external stakeholders, better understand...

IEC work addresses topics related to life below water

Reduction of marine pollution

Reduction of marine pollution

Loading and unloading

Loading and unloading

Wastewater management

Wastewater treatment

Safety and control on off-shore platforms

Safety and control on off-shore platforms

Wastewater management

Wastewater management

Electrification of shipping

Electrification of shipping

IEC work directly impacts the following SDG target

14.1 Significantly reduce marine pollution of all kinds, including from land-based activities, and nutrient pollution

A move from combustion engines to electric motors in agriculture, industry and transportation can significantly reduce nutrient pollution. Electrification of shipping at sea and when anchored in harbours, during loading and unloading of goods can significantly contribute to reducing pollution in ports and the open sea. Ensuring the proper functioning and safety of all activities and devices on offshore platforms and during oil drilling through testing and certification can help avoid spills that can deeply affect marine life and coastal areas. Water treatment plants can significantly reduce marine pollution through raw sewage. IEC work applies to all these areas.

  • IEC TC 18: Electrical installations of ships and of mobile and fixed offshore units;
  • IEC SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters;
  • IEC TC 27: Industrial electroheating and electromagnetic processing;
  • IEC TC 80: Maritime navigation and radiocommunication equipment and systems;
  • IEC TC 86 and 3 SCs: Fibre optics;
  • IEC TC 111: Environmental standardization for electrical and electronic products and systems;
  • IEC TC 114: Marine energy - Wave, tidal and other water current converters;
  • ISO/IEC JTC 1/SC 41: Internet of things and related technologies;
  • IECEx: IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres.

 

Anchor placeholder #data
  • Publications
  • Projects

Reference

Language

TC/SC

IEC 60034-1:2022
Edition 14.0 (2022-02-14)
Rotating electrical machines - Part 1: Rating and performance

EN-FR

TC 2

IEC 60034-2-1:2014
Edition 2.0 (2014-06-27)
Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

EN-FR

TC 2

IEC 60034-2-2:2010
Edition 1.0 (2010-03-16)
Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1

EN-FR

TC 2

IEC 60034-2-3:2020
Edition 1.0 (2020-03-19)
Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

EN-FR

TC 2

IEC 60034-3:2020
Edition 7.0 (2020-05-26)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators

EN-FR

TC 2

IEC 60034-4-1:2018
Edition 1.0 (2018-04-27)
Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests

EN-FR

TC 2

IEC 60034-5:2020
Edition 5.0 (2020-04-29)
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification

EN-FR, EN

TC 2

IEC 60034-6:1991
Edition 2.0 (1991-10-01)
Rotating electrical machines - Part 6: Methods of cooling (IC Code)

EN-FR, ES

TC 2

IEC 60034-7:2020
Edition 3.0 (2020-10-07)
Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)

EN-FR

TC 2

IEC 60034-8:2007
Edition 3.0 (2007-06-22)
Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-8:2007/AMD1:2014
Edition 3.0 (2014-03-20)
Amendment 1 - Rotating electrical machines - Part 8: Terminal markings and direction of rotation

EN-FR, ES

TC 2

IEC 60034-9:2021
Edition 5.0 (2021-10-14)
Rotating electrical machines - Part 9: Noise limits

EN-FR

TC 2

IEC 60034-11:2020
Edition 3.0 (2020-10-05)
Rotating electrical machines - Part 11: Thermal protection

EN-FR

TC 2

IEC 60034-12:2016
Edition 3.0 (2016-11-23)
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

EN-FR

TC 2

IEC 60034-14:2018
Edition 4.0 (2018-08-17)
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

EN-FR

TC 2

IEC 60034-15:2009
Edition 3.0 (2009-03-17)
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

EN-FR, ES

TC 2

IEC 60034-16-1:2011
Edition 2.0 (2011-05-25)
Rotating electrical machines - Part 16-1: Excitation systems for synchronous machines - Definitions

EN-FR, ES

TC 2

IEC TR 60034-16-2:1991
Edition 1.0 (1991-02-15)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

EN-FR, ES

TC 2

IEC TS 60034-16-3:1996
Edition 1.0 (1996-02-14)
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

EN-FR

TC 2

IEC 60034-18-1:2010
Edition 2.0 (2010-03-10)
Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines

EN-FR

TC 2

IEC 60034-18-21:2012
Edition 2.0 (2012-09-19)
Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification

EN-FR

TC 2

IEC 60034-18-31:2012
Edition 2.0 (2012-06-25)
Rotating electrical machines - Part 18-31: Functional evaluation of insulation systems - Test procedures for form-wound windings - Thermal evaluation and classification of insulation systems used in rotating machines

EN-FR, ES

TC 2

IEC TS 60034-18-33:2010
Edition 2.0 (2010-07-22)
Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses

EN

TC 2

IEC 60034-18-34:2012
Edition 1.0 (2012-06-14)
Rotating electrical machines - Part 18-34: Functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation of thermomechanical endurance of insulation systems

EN-FR, ES

TC 2

IEC 60034-18-41:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019
Edition 1.0 (2019-06-25)
Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-41:2014/AMD1:2019/COR1:2020
Edition 1.0 (2020-12-11)
Corrigendum 1 - Amendment 1 - Rotating electrical machines - Part 18-41: Partial discharge free electrical insulation systems (Type I) used in electrical rotating machines fed from voltage converters - Qualification and quality control tests

EN-FR

TC 2

IEC 60034-18-42:2017
Edition 1.0 (2017-02-07)
Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-18-42:2017/AMD1:2020
Edition 1.0 (2020-08-18)
Amendment 1 - Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests

EN-FR

TC 2

IEC 60034-19:2014
Edition 2.0 (2014-09-25)
Rotating electrical machines - Part 19: Specific test methods for d.c. machines on conventional and rectifier-fed supplies

EN-FR, ES

TC 2

IEC TS 60034-20-1:2002
Edition 1.0 (2002-01-18)
Rotating electrical machines - Part 20-1: Control motors - Stepping motors

EN-FR

TC 2

IEC 60034-22:2009
Edition 2.0 (2009-10-28)
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets

EN-FR, ES

TC 2

IEC 60034-23:2019
Edition 1.0 (2019-01-24)
Rotating electrical machines - Part 23: Repair, overhaul and reclamation

EN-FR

TC 2

IEC TS 60034-24:2009
Edition 1.0 (2009-09-16)
Rotating electrical machines - Part 24: Online detection and diagnosis of potential failures at the active parts of rotating electrical machines and of bearing currents - Application guide

EN-FR

TC 2

IEC TS 60034-25:2022
Edition 4.0 (2022-06-27)
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide

EN

TC 2

IEC 60034-26:2006
Edition 1.0 (2006-07-24)
Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR, ES

TC 2

IEC 60034-26:2006/COR1:2014
Edition 1.0 (2014-09-03)
Corrigendum 1 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

EN-FR

TC 2

IEC 60034-27-1:2017
Edition 1.0 (2017-12-13)
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation

EN-FR

TC 2

IEC TS 60034-27-2:2012
Edition 1.0 (2012-03-22)
Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation of rotating electrical machines

EN

TC 2

IEC 60034-27-3:2015
Edition 1.0 (2015-12-16)
Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-27-4:2018
Edition 1.0 (2018-01-24)
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines

EN-FR

TC 2

IEC 60034-28:2012
Edition 2.0 (2012-12-13)
Rotating electrical machines - Part 28: Test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors

EN-FR, ES

TC 2

IEC 60034-29:2008
Edition 1.0 (2008-03-11)
Rotating electrical machines - Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise

EN-FR, ES

TC 2

IEC 60034-30-1:2014
Edition 1.0 (2014-03-06)
Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code)

EN-FR

TC 2

IEC TS 60034-30-2:2016
Edition 1.0 (2016-12-08)
Rotating electrical machines - Part 30-2: Efficiency classes of variable speed AC motors (IE-code)

EN

TC 2

IEC TS 60034-31:2021
Edition 2.0 (2021-03-17)
Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guidelines

EN

TC 2

IEC TS 60034-32:2016
Edition 1.0 (2016-12-15)
Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings

EN

TC 2

IEC 60072-1:2022
Edition 7.0 (2022-03-30)
Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

EN-FR

TC 2

IEC 60072-2:1990
Edition 1.0 (1990-12-31)
Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360

EN-FR

TC 2

IEC 60072-3:1994
Edition 1.0 (1994-03-11)
Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

EN-FR

TC 2

IEC 60079-0:2017
Edition 7.0 (2017-12-13)
Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR, ES

TC 31

IEC 60079-0:2017/ISH1:2019
Edition 7.0 (2019-04-23)
Interpretation Sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-0:2017/ISH2:2019
Edition 7.0 (2019-06-27)
Interpretation Sheet 2 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-0:2017/COR1:2020
Edition 7.0 (2020-01-20)
Corrigendum 1 - Explosive atmospheres - Part 0: Equipment - General requirements

EN-FR

TC 31

IEC 60079-1:2014
Edition 7.0 (2014-06-27)
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN-FR, ES

TC 31

IEC 60079-1:2014/ISH1:2020
Edition 7.0 (2020-05-28)
Interpretation sheet 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN

TC 31

IEC 60079-1:2014/COR1:2018
Edition 7.0 (2018-06-26)
Corrigendum 1 - Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

EN-FR

TC 31

IEC 60079-2:2014
Edition 6.0 (2014-07-21)
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

EN-FR, ES

TC 31

IEC 60079-2:2014/COR1:2015
Edition 6.0 (2015-07-07)
Corrigendum 1 - Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

EN-FR

TC 31

IEC 60079-5:2015
Edition 4.0 (2015-02-17)
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

EN-FR, ES

TC 31

IEC 60079-5:2015/AMD1:2022
Edition 4.0 (2022-05-12)
Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q"

EN-FR, EN

TC 31

IEC 60079-6:2015
Edition 4.0 (2015-02-20)
Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

EN-FR, ES

TC 31

IEC 60079-6:2015/AMD1:2020
Edition 4.0 (2020-02-24)
Amendment 1 - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"

EN-FR

TC 31

IEC 60079-7:2015
Edition 5.0 (2015-06-26)
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR, EN, ES

TC 31

IEC 60079-7:2015/ISH1:2016
Edition 5.0 (2016-09-15)
Intrepretation sheet 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR

TC 31

IEC 60079-7:2015/AMD1:2017
Edition 5.0 (2017-08-04)
Amendment 1 - Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

EN-FR, ES

TC 31

IEC 60079-10-1:2020
Edition 3.0 (2020-12-18)
Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

EN-FR, ES

TC 31/SC 31J

IEC 60079-10-2:2015
Edition 2.0 (2015-01-16)
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

EN-FR, ES

TC 31/SC 31J

IEC 60079-11:2011
Edition 6.0 (2011-06-30)
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR, ES

TC 31/SC 31G

IEC 60079-11:2011/ISH1:2014
Edition 6.0 (2014-10-08)
Interpretation sheet 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH2:2016
Edition 6.0 (2016-07-21)
Interpretation sheet 2 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH3:2016
Edition 6.0 (2016-07-21)
Intrepretation sheet 3 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH4:2019
Edition 6.0 (2019-04-16)
Interpretation Sheet 4 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/ISH5:2019
Edition 6.0 (2019-08-29)
Interpretation Sheet 5 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN

TC 31/SC 31G

IEC 60079-11:2011/ISH6:2019
Edition 6.0 (2019-12-13)
Interpretation sheet 6 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-11:2011/COR1:2012
Edition 6.0 (2012-01-27)
Corrigendum 1 - Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

EN-FR

TC 31/SC 31G

IEC 60079-13:2017
Edition 2.0 (2017-05-22)
Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"

EN-FR, EN, ES

TC 31

IEC 60079-14:2013
Edition 5.0 (2013-11-28)
Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR, ES

TC 31/SC 31J

IEC 60079-14:2013/ISH1:2017
Edition 5.0 (2017-02-13)
Intrepretation sheet 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR

TC 31/SC 31J

IEC 60079-14:2013/ISH2:2020
Edition 5.0 (2020-03-13)
Interpretation sheet 2 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN

TC 31/SC 31J

IEC 60079-14:2013/COR1:2016
Edition 5.0 (2016-01-28)
Corrigendum 1 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection

EN-FR

TC 31/SC 31J

IEC 60079-15:2017
Edition 5.0 (2017-12-08)
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"

EN-FR, ES

TC 31

IEC TR 60079-16:1990
Edition 1.0 (1990-05-15)
Electrical apparatus for explosive gas atmospheres. Part 16: Artificial ventilation for the protection of analyser(s) houses

EN-FR, ES

TC 31

IEC 60079-17:2013
Edition 5.0 (2013-11-19)
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

EN-FR, ES

TC 31/SC 31J

IEC 60079-18:2014
Edition 4.0 (2014-12-12)
Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR, ES

TC 31

IEC 60079-18:2014/COR1:2018
Edition 4.0 (2018-07-25)
Corrigendum 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR

TC 31

IEC 60079-18:2014/AMD1:2017
Edition 4.0 (2017-08-24)
Amendment 1 - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m"

EN-FR, ES

TC 31

IEC 60079-19:2019
Edition 4.0 (2019-10-18)
Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

EN-FR, ES

TC 31/SC 31J

IEC 60079-25:2020
Edition 3.0 (2020-06-26)
Explosive atmospheres - Part 25: Intrinsically safe electrical systems

EN-FR

TC 31/SC 31G

IEC 60079-25:2020/COR1:2020
Edition 3.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 25: Intrinsically safe electrical systems

EN-FR

TC 31/SC 31G

IEC 60079-26:2021
Edition 4.0 (2021-02-25)
Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection

EN-FR

TC 31

IEC 60079-28:2015
Edition 2.0 (2015-05-27)
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

EN-FR, ES

TC 31

IEC 60079-28:2015/ISH1:2019
Edition 2.0 (2019-11-14)
Interpretation Sheet 1 - Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation

EN-FR

TC 31

IEC 60079-29-1:2016
Edition 2.0 (2016-07-21)
Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN-FR, EN, ES

TC 31

IEC 60079-29-1:2016/ISH1:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN

TC 31

IEC 60079-29-1:2016/ISH2:2019
Edition 2.0 (2019-04-16)
Interpretation Sheet 2 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN

TC 31

IEC 60079-29-1:2016/AMD1:2020
Edition 2.0 (2020-03-24)
Amendment 1 - Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases

EN-FR

TC 31

IEC 60079-29-2:2015
Edition 2.0 (2015-03-16)
Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen

EN-FR, EN, ES

TC 31

IEC 60079-29-3:2014
Edition 1.0 (2014-03-27)
Explosive atmospheres - Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems

EN-FR, ES

TC 31

IEC 60079-29-4:2009
Edition 1.0 (2009-11-10)
Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

EN-FR, ES

TC 31

IEC 60079-29-4:2009/COR1:2010
Edition 1.0 (2010-08-10)
Corrigendum 1 - Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases

EN-FR

TC 31

IEC/IEEE 60079-30-1:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

EN-FR, EN, ES

TC 31

IEC/IEEE 60079-30-2:2015
Edition 1.0 (2015-09-28)
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

EN-FR, EN, ES

TC 31

IEC 60079-31:2022
Edition 3.0 (2022-01-17)
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"

EN-FR

TC 31

IEC TS 60079-32-1:2013
Edition 1.0 (2013-08-20)
Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

EN-FR, EN, RU

TC 31

IEC TS 60079-32-1:2013/AMD1:2017
Edition 1.0 (2017-03-16)
Amendment 1 - Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

EN-FR, EN

TC 31

IEC 60079-32-2:2015
Edition 1.0 (2015-02-25)
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

EN-FR, ES, RU

TC 31

IEC 60079-33:2012
Edition 1.0 (2012-09-27)
Explosive atmospheres - Part 33: Equipment protection by special protection 's'

EN-FR

TC 31

IEC 60079-35-1:2011
Edition 1.0 (2011-05-26)
Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion

EN-FR, ES

TC 31

IEC 60079-35-2:2011
Edition 1.0 (2011-12-07)
Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters

EN-FR, ES

TC 31

IEC TS 60079-39:2015
Edition 1.0 (2015-06-11)
Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

EN

TC 31/SC 31G

IEC TS 60079-39:2015/COR1:2020
Edition 1.0 (2020-10-20)
Corrigendum 1 - Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation

EN

TC 31/SC 31G

IEC TS 60079-40:2015
Edition 1.0 (2015-02-05)
Explosive atmospheres - Part 40: Requirements for process sealing between flammable process fluids and electrical systems

EN

TC 31

IEC TS 60079-42:2019
Edition 1.0 (2019-04-17)
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

EN-FR

TC 31

IEC TS 60079-43:2017
Edition 1.0 (2017-11-13)
Explosive atmospheres - Part 43: Equipment in adverse service conditions

EN

TC 31

IEC TS 60079-46:2017
Edition 1.0 (2017-08-31)
Explosive atmospheres - Part 46: Equipment assemblies

EN-FR, EN

TC 31

IEC 60086-6:2020
Edition 1.0 (2020-02-07)
Primary batteries - Part 6: Guidance on environmental aspects

EN-FR

TC 35

IEC 60092-304:2022
Edition 4.0 (2022-08-30)
Electrical installations in ships - Part 304: Equipment - Semiconductor converters

EN

TC 18

IEC 60136:1986
Edition 2.0 (1986-06-30)
Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60136:1986/AMD1:1995
Edition 2.0 (1995-04-26)
Amendment 1 - Dimensions of brushes and brush-holders for electrical machinery

EN-FR

TC 2

IEC 60146-1-1:2009
Edition 4.0 (2009-06-29)
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

EN-FR

TC 22

IEC TR 60146-1-2:2019
Edition 5.0 (2019-10-22)
Semiconductor converters - General requirements and line commutated converters - Part 1-2: Application guidelines

EN

TC 22

IEC 60146-2:1999
Edition 2.0 (1999-11-18)
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

EN-FR

TC 22

IEC 60276:2018
Edition 2.0 (2018-05-08)
Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature

EN-FR

TC 2

IEC 60309-5:2017
Edition 1.0 (2017-01-24)
Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC)

EN-FR, ES

TC 23/SC 23H

IEC 60335-2-86:2018
Edition 3.0 (2018-04-20)
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines

EN-FR, EN

TC 61/SC 61H

IEC 60356:1971
Edition 1.0 (1971-01-01)
Dimensions for commutators and slip-rings

EN-FR

TC 2

IEC 60364-7-701:2019
Edition 3.0 (2019-10-14)
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

EN-FR

TC 64

IEC 60364-7-702:2010
Edition 3.0 (2010-05-12)
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains

EN-FR

TC 64

IEC 60364-7-705:2006
Edition 2.0 (2006-07-10)
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

EN-FR, EN, FR

TC 64

IEC 60364-7-712:2017
Edition 2.0 (2017-04-10)
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

EN-FR

TC 64

IEC 60413:1972
Edition 1.0 (1972-01-01)
Test procedures for determining physical properties of brush materials for electrical machines

EN-FR, RU

TC 2

IEC 60455-3-1:2003
Edition 2.0 (2003-04-28)
Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds

EN-FR, ES

TC 15

IEC 60560:1977
Edition 1.0 (1977-01-01)
Definitions and terminology of brush-holders for electrical machines

EN-FR, RU

TC 2

IEC 60664-1:2020
Edition 3.0 (2020-05-26)
Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

EN-FR, ES

TC 109

IEC 60664-1:2020/COR1:2020
Edition 3.0 (2020-10-27)
Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests

EN-FR

TC 109

IEC TR 60664-2-1:2011
Edition 2.0 (2011-01-31)
Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

EN-FR

TC 109

IEC TR 60664-2-1:2011/COR1:2011
Edition 2.0 (2011-10-24)
Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing

EN-FR

TC 109

IEC TR 60664-2-2:2002
Edition 1.0 (2002-01-22)
Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide

EN

TC 109

IEC 60664-3:2016
Edition 3.0 (2016-11-04)
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution

EN-FR, ES

TC 109

IEC 60664-4:2005
Edition 2.0 (2005-09-15)
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress

EN-FR, ES

TC 109

IEC 60715:2017
Edition 2.0 (2017-07-28)
Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories

EN-FR

TC 121/SC 121A

IEC 60755:2017
Edition 1.0 (2017-10-26)
General safety requirements for residual current operated protective devices

EN

TC 23/SC 23E

IEC 60773:2021
Edition 2.0 (2021-04-07)
Rotating electrical machines - Test methods and apparatus for the measurement of the operational characteristics of brushes

EN-FR

TC 2

IEC TR 60778:1984
Edition 1.0 (1984-01-01)
Brush-holders for slip-rings, Group R - type RA

EN-FR

TC 2

IEC TR 60890:2022
Edition 3.0 (2022-09-29)
A method of temperature-rise verification of low-voltage switchgear and controlgear assemblies by calculation

EN

TC 121/SC 121B

IEC 60898-1:2015
Edition 2.0 (2015-03-23)
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

EN-FR, EN, ES

TC 23/SC 23E

IEC 60898-1:2015/COR1:2015
Edition 2.0 (2015-11-18)
Corrigendum 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

EN

TC 23/SC 23E

IEC 60898-1:2015/AMD1:2019
Edition 2.0 (2019-12-13)
Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

EN-FR

TC 23/SC 23E

IEC 60898-1:2015/AMD1:2019/COR1:2020
Edition 2.0 (2020-03-26)
Corrigendum 1 - Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

EN-FR

TC 23/SC 23E

IEC 60898-2:2016
Edition 2.0 (2016-08-17)
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for AC and DC operation

EN-FR

TC 23/SC 23E

IEC 60898-3:2019
Edition 1.0 (2019-04-05)
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation

EN

TC 23/SC 23E

IEC 60898-3:2019/AMD1:2022
Edition 1.0 (2022-02-11)
Amendment 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 3: Circuit-breakers for DC operation

EN

TC 23/SC 23E

IEC 60934:2019
Edition 4.0 (2019-01-30)
Circuit breakers for equipment (CBE)

EN-FR, ES

TC 23/SC 23E

IEC 60945:2002
Edition 4.0 (2002-08-14)
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

EN-FR, EN, FR, ES

TC 80

IEC 60945:2002/COR1:2008
Edition 4.0 (2008-04-14)
Corrigendum 1 - Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

EN-FR

TC 80

IEC 60947-1:2020
Edition 6.0 (2020-04-22)
Low-voltage switchgear and controlgear - Part 1: General rules

EN-FR, ES

TC 121/SC 121A

IEC 60947-2:2016
Edition 5.0 (2016-06-07)
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

EN-FR, ES

TC 121/SC 121A

IEC 60947-2:2016/COR1:2016
Edition 5.0 (2016-11-18)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

EN-FR

TC 121/SC 121A

IEC 60947-2:2016/AMD1:2019
Edition 5.0 (2019-07-08)
Amendment 1 - Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

EN-FR, ES

TC 121/SC 121A

IEC 60947-3:2020
Edition 4.0 (2020-04-22)
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

EN-FR, ES

TC 121/SC 121A

IEC 60947-3:2020/COR1:2021
Edition 4.0 (2021-10-22)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

EN-FR

TC 121/SC 121A

IEC 60947-4-1:2018
Edition 4.0 (2018-10-25)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR, ES

TC 121/SC 121A

IEC 60947-4-1:2018/ISH1:2020
Edition 4.0 (2020-03-13)
Interpretation sheet 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-1:2018/COR1:2020
Edition 4.0 (2020-04-22)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-1:2018/COR2:2021
Edition 4.0 (2021-04-20)
Corrigendum 2 - Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-2:2020
Edition 4.0 (2020-06-26)
Low-voltage switchgear and controlgear – Part 4-2: Contactors and motor-starters – Semiconductor motor controllers, starters and soft-starters

EN-FR

TC 121/SC 121A

IEC 60947-4-3:2020
Edition 3.0 (2020-07-14)
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - Semiconductor controllers and semiconductor contactors for non-motor loads

EN

TC 121/SC 121A

IEC 60947-5-1:2016
Edition 4.0 (2016-05-25)
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-1:2016/COR1:2016
Edition 4.0 (2016-07-15)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

EN-FR

TC 121/SC 121A

IEC 60947-5-1:2016/COR2:2020
Edition 4.0 (2020-04-22)
Corrigendum 2 - Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

EN-FR

TC 121/SC 121A

IEC 60947-5-2:2019
Edition 4.0 (2019-10-18)
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-3:2013
Edition 2.0 (2013-08-06)
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-4:2002
Edition 2.0 (2002-10-15)
Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-4:2002/AMD1:2019
Edition 2.0 (2019-05-22)
Amendment 1 - Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-5:1997+AMD1:2005 CSV
Edition 1.1 (2005-04-06)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR

TC 121/SC 121A

IEC 60947-5-5:1997
Edition 1.0 (1997-11-26)
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-5:1997/AMD1:2005
Edition 1.0 (2005-01-17)
Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-5:1997/AMD1:2005/COR1:2007
Edition 1.0 (2007-07-25)
Corrigendum 1 - Amendment 1 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR

TC 121/SC 121A

IEC 60947-5-5:1997/AMD2:2016
Edition 1.0 (2016-02-29)
Amendment 2 - Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-6:1999
Edition 1.0 (1999-12-17)
Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-7:2003
Edition 1.0 (2003-06-11)
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-8:2020
Edition 2.0 (2020-08-12)
Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

EN-FR, ES

TC 121/SC 121A

IEC 60947-5-9:2006
Edition 1.0 (2006-12-08)
Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches

EN-FR, ES

TC 121/SC 121A

IEC 60947-6-1:2021
Edition 3.0 (2021-03-16)
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

EN-FR

TC 121/SC 121A

IEC 60947-6-2:2020
Edition 3.0 (2020-12-15)
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

EN-FR

TC 121/SC 121A

IEC 60947-6-2:2020/COR1:2021
Edition 3.0 (2021-12-07)
Corrigendum 1 - Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

EN-FR

TC 121/SC 121A

IEC 60947-7-1:2009
Edition 3.0 (2009-04-20)
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

EN-FR, ES

TC 121/SC 121A

IEC 60947-7-2:2009
Edition 3.0 (2009-04-20)
Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

EN-FR, ES

TC 121/SC 121A

IEC 60947-7-3:2009
Edition 2.0 (2009-04-20)
Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks

EN-FR, ES

TC 121/SC 121A

IEC 60947-7-4:2019
Edition 2.0 (2019-01-18)
Low-voltage switchgear and controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors

EN-FR, ES

TC 121/SC 121A

IEC 60947-8:2021
Edition 2.0 (2021-07-28)
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines

EN-FR

TC 121/SC 121A

IEC 60947-9-1:2019
Edition 1.0 (2019-01-16)
Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices

EN-FR, ES

TC 121/SC 121A

IEC 60999-2:2003
Edition 2.0 (2003-05-09)
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

EN-FR, ES

TC 121/SC 121A

IEC 61008-1:2010
Edition 3.0 (2010-02-11)
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61008-1:2010/AMD1:2012
Edition 3.0 (2012-04-30)
Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61008-1:2010/AMD1:2012/COR1:2016
Edition 3.0 (2016-05-18)
Corrigendum 1 - Amendment 1 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBS) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61008-1:2010/AMD2:2013
Edition 3.0 (2013-09-12)
Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61008-1:2010/AMD2:2013/COR1:2014
Edition 3.0 (2014-01-28)
Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61008-2-1:1990
Edition 1.0 (1990-12-17)
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage

EN-FR, ES

TC 23/SC 23E

IEC 61008-2-2:1990
Edition 1.0 (1990-12-17)
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-2: Applicability of the general rules to RCCB's functionally dependent on line voltage

EN-FR

TC 23/SC 23E

IEC 61009-1:2010
Edition 3.0 (2010-02-11)
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61009-1:2010/AMD1:2012
Edition 3.0 (2012-04-30)
Amendment 1 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61009-1:2010/AMD2:2013
Edition 3.0 (2013-09-12)
Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61009-1:2010/AMD2:2013/COR1:2014
Edition 3.0 (2014-01-28)
Corrigendum 1 - Amendment 2 - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

EN-FR

TC 23/SC 23E

IEC 61009-2-1:1991
Edition 1.0 (1991-07-01)
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage

EN-FR, ES

TC 23/SC 23E

IEC 61009-2-2:1991
Edition 1.0 (1991-07-01)
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage

EN-FR

TC 23/SC 23E

IEC TR 61015:1990
Edition 1.0 (1990-03-31)
Brush-holders for electrical machines. Guide to the measurement of the static thrust applied to brushes

EN-FR

TC 2

IEC 61095:2009
Edition 2.0 (2009-02-05)
Electromechanical contactors for household and similar purposes

EN-FR, ES

TC 121/SC 121A

IEC 61097-4:2012
Edition 3.0 (2012-05-29)
Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results

EN

TC 80

IEC 61097-4:2012/AMD1:2016
Edition 3.0 (2016-08-18)
Amendment 1 - Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results

EN

TC 80

IEC 61097-4:2012/AMD2:2019
Edition 3.0 (2019-06-27)
Amendment 2 - Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testing and required test results

EN-FR

TC 80

IEC 61097-6:2005+AMD1:2011 CSV
Edition 2.1 (2012-01-30)
Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)

EN

TC 80

IEC 61097-6:2005
Edition 2.0 (2005-12-07)
Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)

EN

TC 80

IEC 61097-6:2005/AMD1:2011
Edition 2.0 (2011-12-14)
Amendment 1 - Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)

EN

TC 80

IEC 61097-6:2005/AMD2:2019
Edition 2.0 (2019-07-10)
Amendment 2 - Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)

EN-FR

TC 80

IEC 61097-16:2019
Edition 1.0 (2019-07-08)
Global maritime distress and safety system (GMDSS) - Part 16: Ship earth stations operating in mobile-satellite systems recognized for use in the GMDSS - Operational and performance requirements, methods of testing and required test results

EN-FR

TC 80

IEC 61148:2011
Edition 2.0 (2011-10-20)
Terminal markings for valve device stacks and assemblies and for power conversion equipment

EN-FR

TC 22

IEC 61400-3-1:2019
Edition 1.0 (2019-04-05)
Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines

EN-FR, EN, ES

TC 88

IEC TS 61400-3-2:2019
Edition 1.0 (2019-04-05)
Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines

EN

TC 88

IEC TR 61439-0:2022
Edition 3.0 (2022-07-22)
Low-voltage switchgear and controlgear assemblies- Part 0: Guidance to specifying assemblies

EN-FR

TC 121/SC 121B

IEC 61439-1:2020
Edition 3.0 (2020-05-05)
Low-voltage switchgear and controlgear assemblies - Part 1: General rules

EN-FR, ES

TC 121/SC 121B

IEC 61439-1:2020/COR1:2021
Edition 3.0 (2021-12-07)
Corrigendum 1 - Low-voltage switchgear and controlgear assemblies - Part 1: General rules

EN-FR

TC 121/SC 121B

IEC 61439-2:2020
Edition 3.0 (2020-07-22)
Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies

EN-FR, EN, ES

TC 121/SC 121B

IEC 61439-3:2012
Edition 1.0 (2012-02-16)
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

EN-FR, ES

TC 121/SC 121B

IEC 61439-3:2012/COR1:2013
Edition 1.0 (2013-09-11)
Corrigendum 1 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

EN-FR

TC 121/SC 121B

IEC 61439-3:2012/COR2:2019
Edition 1.0 (2019-03-20)
Corrigendum 2 - Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

EN-FR

TC 121/SC 121B

IEC 61439-4:2012
Edition 1.0 (2012-11-15)
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

EN-FR, ES

TC 121/SC 121B

IEC 61439-5:2014
Edition 2.0 (2014-08-25)
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

EN-FR, ES

TC 121/SC 121B

IEC 61439-5:2014/COR1:2015
Edition 2.0 (2015-03-05)
Corrigendum 1 - Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

EN-FR

TC 121/SC 121B

IEC 61439-6:2012
Edition 1.0 (2012-05-23)
Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways)

EN-FR, ES

TC 121/SC 121B

IEC 61439-7:2022
Edition 2.0 (2022-07-07)
Low-voltage switchgear and controlgear assemblies - Part 7: Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations

EN-FR

TC 121/SC 121B

IEC 61540:1997+AMD1:1998 CSV
Edition 1.1 (1999-03-11)
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

EN-FR

TC 23/SC 23E

IEC 61540:1997
Edition 1.0 (1997-08-26)
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

EN-FR

TC 23/SC 23E

IEC 61540:1997/AMD1:1998
Edition 1.0 (1998-11-30)
Amendment 1 - Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

EN-FR

TC 23/SC 23E

IEC 61543:1995
Edition 1.0 (1995-04-13)
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

EN-FR, ES

TC 23/SC 23E

IEC 61543:1995/AMD1:2004
Edition 1.0 (2004-08-27)
Amendment 1 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

EN-FR, ES

TC 23/SC 23E

IEC 61543:1995/AMD2:2005
Edition 1.0 (2005-11-23)
Amendment 2 - Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

EN-FR, ES

TC 23/SC 23E

IEC TR 61641:2014
Edition 3.0 (2014-09-09)
Enclosed low-voltage switchgear and controlgear assemblies - Guide for testing under conditions of arcing due to internal fault

EN-FR

TC 121/SC 121B

IEC 61800-1:2021
Edition 2.0 (2021-01-19)
Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems

EN-FR

TC 22/SC 22G

IEC 61800-2:2021
Edition 3.0 (2021-03-03)
Adjustable speed electrical power drive systems - Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems

EN-FR

TC 22/SC 22G

IEC 61800-5-1:2022
Edition 3.0 (2022-08-31)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy

EN-FR

TC 22/SC 22G

IEC 61800-5-2:2016
Edition 2.0 (2016-04-18)
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional

EN-FR

TC 22/SC 22G

IEC 61800-9-1:2017
Edition 1.0 (2017-03-03)
Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - General requirements for setting energy efficiency standards for power driven equipment using the extended product approach (EPA) and semi analytic model (SAM)

EN-FR

TC 22/SC 22G

IEC 61800-9-2:2017
Edition 1.0 (2017-03-03)
Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters

EN-FR

TC 22/SC 22G

IEC TR 61912-1:2007
Edition 1.0 (2007-08-23)
Low-voltage switchgear and controlgear - Overcurrent protective devices - Part 1: Application of short-circuit ratings

EN-FR

TC 121/SC 121A

IEC TR 61912-2:2009
Edition 1.0 (2009-05-13)
Low-voltage switchgear and controlgear - Over-current protective devices - Part 2: Selectivity under over-current conditions

EN

TC 121/SC 121A

IEC 61915-1:2007
Edition 1.0 (2007-11-27)
Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles

EN-FR

TC 121/SC 121A

IEC 61915-2:2011
Edition 1.0 (2011-10-20)
Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment

EN-FR

TC 121/SC 121A

IEC 61915-2:2011/COR1:2012
Edition 1.0 (2012-07-27)
Corrigendum 1 - Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 2: Root device profiles for starters and similar equipment

EN-FR

TC 121/SC 121A

IEC 61924-2:2021
Edition 2.0 (2021-02-12)
Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results

EN-FR

TC 80

IEC 62019:1999+AMD1:2002 CSV
Edition 1.1 (2003-01-31)
Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

EN-FR

TC 23/SC 23E

IEC 62019:1999
Edition 1.0 (1999-02-26)
Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

EN-FR, ES

TC 23/SC 23E

IEC 62019:1999/AMD1:2002
Edition 1.0 (2002-11-28)
Amendment 1 - Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units

EN-FR, ES

TC 23/SC 23E

IEC 62020-1:2020
Edition 1.0 (2020-04-21)
Electrical accessories - Residual current monitors (RCMs) - Part 1: RCMs for household and similar uses

EN-FR, ES

TC 23/SC 23E

IEC 62020-1:2020/COR1:2020
Edition 1.0 (2020-07-10)
Corrigendum 1 - Electrical accessories - Residual current monitors (RCMs) - Part 1: RCMs for household and similar uses

EN-FR

TC 23/SC 23E

IEC 62026-1:2019
Edition 3.0 (2019-05-09)
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules

EN-FR, ES

TC 121/SC 121A

IEC 62026-2:2008
Edition 2.0 (2008-01-29)
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)

EN-FR, EN

TC 121/SC 121A

IEC 62026-2:2008/AMD1:2019
Edition 2.0 (2019-07-10)
Amendment 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)

EN-FR

TC 121/SC 121A

IEC 62026-3:2014
Edition 3.0 (2014-08-22)
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

EN-FR

TC 121/SC 121A

IEC 62026-3:2014/COR1:2015
Edition 3.0 (2015-03-05)
Corrigendum 1 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

EN-FR

TC 121/SC 121A

IEC 62026-3:2014/COR2:2019
Edition 3.0 (2019-10-29)
Corrigendum 2 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

EN-FR

TC 121/SC 121A

IEC 62026-7:2010
Edition 1.0 (2010-12-09)
Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet

EN-FR

TC 121/SC 121A

IEC 62091:2007
Edition 1.0 (2007-01-24)
Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps

EN-FR

TC 121/SC 121A

IEC 62208:2011
Edition 2.0 (2011-08-19)
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements

EN-FR, ES

TC 121/SC 121B

IEC 62335:2008
Edition 1.0 (2008-07-08)
Circuit breakers - Switched protective earth portable residual current devices for class I and battery powered vehicle applications

EN-FR

TC 23/SC 23E

IEC TR 62350:2006
Edition 1.0 (2006-12-14)
Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use

EN-FR

TC 23/SC 23E

IEC 62423:2009
Edition 2.0 (2009-11-20)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses

EN-FR, ES

TC 23/SC 23E

IEC 62423:2009/COR1:2011
Edition 2.0 (2011-12-16)
Corrigendum 1 - Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses

EN-FR

TC 23/SC 23E

IEC 62423:2009/COR2:2021
Edition 2.0 (2021-07-22)
Corrigendum 2 - Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses

EN-FR

TC 23/SC 23E

IEC TS 62578:2015
Edition 2.0 (2015-04-15)
Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter (AIC) applications including design recommendations for their emission values below 150 kHz

EN-FR

TC 22

IEC TS 62600-40:2019
Edition 1.0 (2019-06-18)
Marine energy - Wave, tidal and other water current converters - Part 40: Acoustic characterization of marine energy converters

EN

TC 114

IEC 62606:2013
Edition 1.0 (2013-07-09)
General requirements for arc fault detection devices

EN-FR, ES

TC 23/SC 23E

IEC 62606:2013/COR1:2013
Edition 1.0 (2013-11-27)
Corrigendum 1 - General requirements for arc fault detection devices

EN-FR

TC 23/SC 23E

IEC 62606:2013/AMD1:2017
Edition 1.0 (2017-02-09)
Amendment 1 - General requirements for arc fault detection devices

EN-FR, ES

TC 23/SC 23E

IEC 62613-1:2019
Edition 2.0 (2019-05-24)
Plugs, socket-outlets and ship couplers for high-voltage shore connection (HVSC) systems - Part 1: General requirements

EN-FR, EN

TC 23/SC 23H

IEC 62626-1:2014
Edition 1.0 (2014-02-14)
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

EN-FR

TC 121/SC 121A

IEC 62640:2011
Edition 1.0 (2011-01-31)
Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

EN-FR

TC 23/SC 23E

IEC 62640:2011/AMD1:2015
Edition 1.0 (2015-05-05)
Amendment 1 - Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

EN-FR

TC 23/SC 23E

IEC 62683-1:2017
Edition 1.0 (2017-07-12)
Low-voltage switchgear and controlgear - Product data and properties for information exchange - Part 1: Catalogue data

EN-FR

TC 121/SC 121A

IEC 62695:2014
Edition 1.0 (2014-07-09)
Railway applications - Fixed installations - Traction transformers

EN-FR

TC 9

IEC TR 62710:2015
Edition 1.0 (2015-05-05)
Residual current devices (RCDs) associated with additional functions(s)

EN

TC 23/SC 23E

IEC 62752:2016
Edition 1.0 (2016-03-04)
In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

EN-FR, ES

TC 23/SC 23E

IEC 62752:2016/COR1:2019
Edition 1.0 (2019-02-28)
Corrigendum 1 - In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPDs)

EN-FR

TC 23/SC 23E

IEC 62752:2016/AMD1:2018
Edition 1.0 (2018-09-13)
Amendment 1 - In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

EN-FR, ES

TC 23/SC 23E

IEC 62873-3-1:2020
Edition 2.0 (2020-11-20)
Residual current operated circuit-breakers for household and similar use - Part 3-1: Particular requirements for devices with screwless-type terminals for external copper conductors

EN

TC 23/SC 23E

IEC 62873-3-2:2020
Edition 2.0 (2020-11-20)
Residual current operated circuit-breakers for household and similar use - Part 3-2: Particular requirements for devices with flat quick-connect terminations

EN

TC 23/SC 23E

IEC 62873-3-3:2016
Edition 1.0 (2016-09-07)
Residual current operated circuit-breakers for household and similar use - Part 3-3: Specific requirements for RCDs with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with aluminium conductors

EN

TC 23/SC 23E

IEC 62955:2018
Edition 1.0 (2018-03-12)
Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles

EN-FR

TC 23/SC 23E

IEC 62990-1:2019
Edition 1.0 (2019-06-26)
Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases

EN-FR

TC 31

IEC 62990-1:2019/COR1:2019
Edition 1.0 (2019-12-04)
Corrigendum 1 - Workplace atmospheres - Part 1: Gas detectors - Performance requirements of detectors for toxic gases

EN-FR

TC 31

IEC TS 62993:2017
Edition 1.0 (2017-07-12)
Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC

EN

TC 109

IEC TS 62993:2017/COR1:2018
Edition 1.0 (2018-06-13)
Corrigendum 1 - Guidance for determination of clearances, creepage distances and requirements for solid insulation for equipment with a rated voltage above 1 000 V AC and 1 500 V DC, and up to 2 000 V AC and 3 000 V DC

EN

TC 109

IEC TR 63021:2016
Edition 1.0 (2016-09-06)
Rotating electrical machinery - Natural graphite brush for slip-ring in wound rotor-type induction motor - Application information

EN

TC 2

IEC 63024:2017
Edition 1.0 (2017-12-13)
Requirements for automatic reclosing devices (ARDs) for circuit breakers, RCBOs-RCCBs for household and similar uses

EN-FR, ES

TC 23/SC 23E

IEC TR 63040:2016
Edition 1.0 (2016-09-26)
Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters

EN

TC 109

IEC TR 63040:2016/COR1:2019
Edition 1.0 (2019-01-16)
Corrigendum 1 - Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters

EN

TC 109

IEC 63052:2019
Edition 1.0 (2019-08-21)
Power frequency overvoltage protective devices (POPs) for household and similar applications

EN-FR, ES

TC 23/SC 23E

IEC 63052:2019/COR1:2019
Edition 1.0 (2019-11-14)
Corrigendum 1 - Power frequency overvoltage protective devices (POPs) for household and similar applications

EN-FR

TC 23/SC 23E

IEC TS 63053:2017
Edition 1.0 (2017-06-29)
General requirements for residual current operated protective devices for DC system

EN

TC 23/SC 23E

IEC TR 63054:2017
Edition 1.0 (2017-07-26)
Low-voltage switchgear and controlgear - Fire risk analysis and risk reduction measures

EN

TC 121/SC 121A

IEC TS 63107:2020
Edition 1.0 (2020-04-28)
Integration of internal arc-fault mitigation systems in power switchgear and controlgear assemblies (PSC‑Assemblies) according to IEC 61439-2

EN-FR

TC 121/SC 121B

IEC TR 63201:2019
Edition 1.0 (2019-05-24)
Low-voltage switchgear and controlgear - Guidance for the development of embedded software

EN

TC 121/SC 121A

IEC TS 63208:2020
Edition 1.0 (2020-03-25)
Low-voltage switchgear and controlgear - Security aspects

EN

TC 121/SC 121A

IEC TR 63216:2019
Edition 1.0 (2019-10-22)
Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies

EN

TC 121/SC 121A

IEC 88528-11:2004
Edition 1.0 (2004-03-23)
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods

EN

TC 2

ISO/IEC 30140-1:2018
Edition 1.0 (2018-02-14)
Information technology - Underwater acoustic sensor network (UWASN) - Part 1: Overview and requirements

EN

ISO/IEC JTC 1/SC 41

ISO/IEC 30140-2:2017
Edition 1.0 (2017-10-26)
Information technology - Underwater acoustic sensor network (UWASN) - Part 2: Reference architecture

EN

ISO/IEC JTC 1/SC 41

ISO/IEC 30140-3:2018
Edition 1.0 (2018-07-25)
Information technology - Underwater Acoustic Sensor Network (UWASN) - Part 3: Entities and interfaces

EN

ISO/IEC JTC 1/SC 41

ISO/IEC 30140-4:2018
Edition 1.0 (2018-07-25)
Information technology - Underwater Acoustic Sensor Network (UWASN) - Part 4: Interoperability

EN

ISO/IEC JTC 1/SC 41

ISO/IEC 30142:2020
Edition 1.0 (2020-06-22)
Internet of Things (IoT) - Underwater acoustic sensor network (UWASN) - Network management system overview and requirements

EN

ISO/IEC JTC 1/SC 41

ISO/IEC 30143:2020
Edition 1.0 (2020-06-22)
Internet of Things (IoT) - Underwater acoustic sensor network (UWASN) - Application profiles

EN

ISO/IEC JTC 1/SC 41

Reference

Current stage

Language

Forecast publication date

TC/SC

PNW TS 114-447 ED1:
Measurement and characterization of biofouling accumulation

PNW

EN

2025-09-30

TC 114

PNW 23E-1272 ED1:
IEC 61009-3: Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) – Part 3 Semiconductor RCBOs

PNW

EN

2027-07-31

TC 23/SC 23E

PNW 121B-164 ED1:
Low-voltage switchgear and controlgear assemblies - Part 8: Assemblies for use in photovoltaic installations

prePNW

EN

2025-10-31

TC 121/SC 121B

IEC 60034-12 ED4:
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

CD

EN

2025-03-31

TC 2

IEC 60034-15 ED4:
Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

PCC

EN

2024-05-31

TC 2

IEC 60079-0 ED8:
Explosive atmospheres - Part 0: Equipment - General requirements

CDM

EN

2024-10-31

TC 31

IEC 60079-1 ED8:
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"

ACD

EN

2024-10-31

TC 31

IEC 60079-2 ED7:
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p"

CCDV

EN-FR

2023-09-01

TC 31

IEC 60079-7 ED6:
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"

CDM

EN

2023-10-26

TC 31

IEC 60079-11 ED7:
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

RFDIS

EN

2023-02-09

TC 31/SC 31G

IEC 60079-14 ED6:
Explosive atmospheres - Part 14: Electrical installations design, selection and erection

PCC

EN

2023-12-27

TC 31/SC 31J

IEC 60079-17 ED6:
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

PRVC

EN-FR

2023-07-16

TC 31/SC 31J

IEC/IEEE 60079-30-1 ED2:
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements

CDM

EN

2025-01-03

TC 31

IEC/IEEE 60079-30-2 ED2:
Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance

CDM

EN

2025-01-03

TC 31

IEC TS 60079-32-1 ED2:
Explosive atmospheres - Part 32-1: Electrostatic hazards, guidance

ACD

EN

2024-10-31

TC 31

IEC 60079-32-2 ED2:
Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests

ACD

EN

2024-10-31

TC 31

IEC 60079-42 ED1:
Explosive atmospheres - Part 42: Electrical safety devices for the control of potential ignition sources for Ex-Equipment

ACD

EN

2024-10-31

TC 31

IEC 60079-46 ED1:
Explosive atmospheres - Part 46: Equipment assemblies

ACD

EN

2024-10-31

TC 31

IEC 60136 ED3:
Dimensions, marking and testing of carbon brushes and dimensions of brush-holders for electrical machinery

CCDV

EN-FR

2023-10-06

TC 2

IEC 60146-1-1 ED5:
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

PCC

EN

2023-11-26

TC 22

IEC 60364-7-702 ED4:
Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains

PCC

EN

2023-12-15

TC 64

IEC 60364-7-712 ED3:
Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

PCC

EN

2023-11-26

TC 64

IEC 60413 ED2:
Test procedures for determining physical properties of brush materials for electrical machines

ACD

EN

2024-07-31

TC 2

IEC 60512-99-003 ED1:
Connectors for electrical and electronic equipment – Tests and measurements – Part 99-003: Endurance test schedules – Test 99c: Test schedule for balanced single-pair connectors unmating under electrical load

TCDV

EN

2023-12-29

TC 48/SC 48B

IEC 60755-1 ED1:
General safety requirements for residual current operated protective devices - Part 1: Residual current operated protective devices for DC systems

PRVD

EN

2022-11-18

TC 23/SC 23E

IEC 60794-7 ED1:
Optical fibre cables – Part 7: Fire-resistant cables for data communication – Sectional specification

ACD

EN

2025-03-03

TC 86/SC 86A

IEC 60947-2 ED6:
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

AFDIS

EN-FR

2023-08-18

TC 121/SC 121A

IEC 60947-3/AMD1 ED4:
Amendment 1 - Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

CDM

EN

2024-09-27

TC 121/SC 121A

IEC 60947-4-1 ED5:
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

CCDV

EN-FR

2023-09-08

TC 121/SC 121A

IEC 60947-5-1 ED5:
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

CCDV

EN-FR

2023-10-06

TC 121/SC 121A

IEC 60947-5-3 ED3:
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

CDM

EN

2025-04-25

TC 121/SC 121A

IEC 60947-5-5 ED2:
Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function

CDM

EN

2024-06-28

TC 121/SC 121A

IEC 60947-5-7 ED2:
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output

CCDV

EN-FR

2023-10-06

TC 121/SC 121A

IEC 60947-7-1 ED4:
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

CDM

EN

2024-12-27

TC 121/SC 121A

IEC 61008-1 ED4:
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

CCDV

EN-FR

2023-10-13

TC 23/SC 23E

IEC 61008-2-1 ED2:
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's). Part 2-1: RCCBs according to 4.1.1

CCDV

EN-FR

2023-10-13

TC 23/SC 23E

IEC 61008-2-2 ED2:
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 2-2: RCCBs according to 4.1.2, 4.1.3, 4.1.4, 4.1.5 and 4.1.6

CCDV

EN-FR

2023-10-13

TC 23/SC 23E

IEC 61009-1 ED4:
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

CCDV

EN-FR

2023-10-13

TC 23/SC 23E

IEC 61009-2-1 ED2:
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: RCBOs according to 4.1.1

CCDV

EN-FR

2023-10-13

TC 23/SC 23E

IEC 61009-2-2 ED2:
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: RCBOs according to 4.1.2, 4.1.3, 4.1.4, 4.1.5 and 4.1.6

CCDV

EN-FR

2023-10-13

TC 23/SC 23E

IEC 61095 ED3:
Electromechanical contactors for household and similar purposes

CCDV

EN-FR

2023-09-01

TC 121/SC 121A

IEC 61108-7 ED1:
Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 7: Satellite Based Augmentation System (SBAS) L1 - Receiver Equipment - Performance standards, methods of testing and required test results

ACD

EN

2024-12-31

TC 80

IEC 61439-3 ED2:
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)

CCDV

EN-FR

2023-10-08

TC 121/SC 121B

IEC 61439-4 ED2:
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

PRVC

EN

2023-08-16

TC 121/SC 121B

IEC 61439-5 ED3:
Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

PRVC

EN-FR

2023-07-28

TC 121/SC 121B

IEC 61540 ED2:
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

PRVC

EN-FR

2023-08-16

TC 23/SC 23E

IEC 61543 ED2:
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

PRVD

EN-FR

2022-11-25

TC 23/SC 23E

IEC 61800-5-2 ED3:
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional

ACD

EN

2025-09-12

TC 22/SC 22G

IEC 61800-9-1 ED2:
Adjustable speed electrical power drive systems - Part 9-1: Ecodesign for motor systems - General requirements for setting energy efficiency standards

TCDV

EN

2024-01-04

TC 22/SC 22G

IEC 61800-9-2 ED2:
Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for motor systems - Energy efficiency determination and classification

TCDV

EN

2024-01-04

TC 22/SC 22G

IEC 62208 ED3:
Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements

PRVC

EN-FR

2023-08-18

TC 121/SC 121B

IEC TS 62271-320 ED1:
High-voltage switchgear and controlgear - Part 320: Environmental aspects and life cycle assessment rules

CDM

EN

2024-05-31

TC 17

IEC 62606/AMD2 ED1:
Amendment 2 - General requirements for arc fault detection devices

PRVD

EN-FR

2022-11-25

TC 23/SC 23E

IEC 62626-1 ED2:
Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work

CDM

EN

2024-09-27

TC 121/SC 121A

IEC 62752 ED2:
In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)

PRVC

EN-FR

2023-06-30

TC 23/SC 23E

IEC 62873-3-3 ED2:
Residual current operated circuit-breakers for household and similar use - Part 3-3: Specific requirements for devices with screw-type terminals for external untreated aluminium conductors and with aluminium screw-type terminals for use with copper or with aluminium conductors

CFDIS

EN

2022-12-16

TC 23/SC 23E

IEC 63462-1 ED1:
Maritime battery system – Part 1: Secondary lithium cells and batteries – Safety requirements

ACD

EN

2024-08-31

TC 18

ISO/IEC 30179 ED1:
Internet of Things (IoT) - Overview and general requirements of IoT system for ecological environment monitoring

RFDIS

EN

2023-03-14

ISO/IEC JTC 1/SC 41

IEC and SDGs

End poverty and hunger. Achieve food security and promote sustainable agriculture

Ensure healthy lives and promote well-being for all

Ensure inclusive and equitable quality education and promote lifelong learning opportunities for all

Achieve gender equality and empower all women and girls

Ensure availability and sustainable management of water and sanitation for all

Ensure access to affordable, reliable, sustainable and modern energy for all

Promote inclusive and sustainable economic growth, full and productive employment and decent work for all

Build resilient infrastructure, promote inclusive and sustainable industrialization and foster innovation

Reduce inequality within and among countries

Make cities and human settlements inclusive, safe, resilient and sustainable

Ensure sustainable consumption and production patterns

Take urgent action to combat climate change and its impacts

Conserve and sustainably use ocean, sea and marine resources

Promote sustainable use of terrestrial ecosystems, halt and reverse land degradation and biodiversity loss

Promote peaceful and inclusive societies for sustainable development, provide access to justice for all and build effective, accountable institutions at all levels

Strengthen the means of implementation and revitalize the global partnership for sustainable development