International Standards and Conformity Assessment for all electrical, electronic and related technologies

SC 48B

Electrical connectors

 

Detail

Committee
Working Groups
Project Leader

Current

Status

Frcst Pub

Date

Stability

Date

SC 48BWG 3 PPUB1995-112023

History

Stage
Document
Downloads
Decision Date
Target Date
PNW
   
1990-01-10 
ANW
1990-05-29 
1CD
48B(SEC.)/206/CD  
1991-07-12 
CCDV
48B(SEC.)/279/CDV  
1993-06-04 
AFDIS
48B(SEC.)/332/RVC  
1994-05-27 
RFDIS
1994-08-19 
CFDIS
48B/361/DIS  
1995-03-241995-02
APUB
48B/442/RVD  
1995-08-081995-08
BPUB
1995-08-09 
PPUB
1995-09-221995-11
  

Abstract

IEC 60603-2:1995 applies to groups of related connectors for use with printed boards. They range from connectors with high contact density for low-voltage applications (Styles B and C) to connectors for heavy currents and high voltages having fewer contacts (Styles D, E, F, G and H). It also applies to Style M two-part connectors supplied in alternative versions having 2, 4 or 6 holes for fitting special contacts, for example coaxial, for high voltages or heavy currents (see annex B), as well as 78, 60 or 42 normal contacts identical with those of style C. It applies further to two-part connectors of Styles Q, R, S, T, U and V whose male contacts are fitted to the fixed board connectors and the female contacts to the free board connectors. All these connectors have the same fitting characteristics irrespective of their various utilization characteristics. The part of the connector fitted to the board is provided with terminations suitable for printed boards in accordance with IEC 60326-3 using a grid of 2,54 mm (0,1 in), as defined in IEC 60097. The free board connectors are provided either with solder or flat quick-connect terminations. The fixed board connectors are provided either with solder, insulation displacement, wrapped connections or with screw terminals and flat quick-connect terminations. The terminations of the fixed board connectors are located in such a way as to be suitable for use with mother boards using a grid of 2,54 mm (0,1 in) as defined in IEC 60097 as well as for automating wiring techniques.

Project

IEC 60603-2:1995 ED3

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

 

 

Associated Documents:

48B/2320A/RM

PDF file 66 kB
48B/1988/MCR

PDF file 127 kB
48B/1732/RM

PDF file 101 kB