IEC 61753-085-2 ED2: Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 085-2: Dispositifs CWDM à fibre amorce unimodale non connectorisés de catégorie C - Environnement contrôlé

IEC 61300-2-14 ED4: Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée

[Result of Voting on 86B/4229/NP - PNW 86B-4229: FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS –
CONNECTOR OPTICAL INTERFACES – Part 1: Optical interfaces for multimode fibres - General and guidance]

Titre français non disponible

[PNW 86B-4262:

Fibre optic interconnecting devices and passive components – Performance standard – Part xxx-02: Wavelength selective simplex cords with single-mode fibre and cylindrical ferrule connectors for category C – Controlled environment

Titre français non disponible

[PNW 86B-4263: Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces- Part 37: Type MDC connector family]

Titre français non disponible

[Compilation of Comments on 86B/4197/CD - IEC 61753-085-2 ED2: Fibre optic interconnecting devices and passive components performance standard - Part 085-2: Non-connectorized single-mode pigtailed CWDM devices for category C - Controlled environment]

Titre français non disponible

IEC 61300-3-53 ED2: Dispositifs d’interconnexion et composants passifs fibroniques - Partie 3-53 : Examens et mesures –Méthode de mesure du flux angulaire inscrit (EAF) fondée sur les données bidimensionnelles de champ lointain d’un guide d’ondes multimodal (fibre incluse)

[IEC 61753-111-8 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for Category G - Ground]

Titre français non disponible

[Unconfirmed minutes of the meeting held Shanghai, the People’s Republic of China from 2019-10-21 (starting time: 14-00h) to 2019-10-21 (ending time: 17-30h)]

Titre français non disponible

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-10: Essais - Résistance à la compression

[IEC 61300-2-10 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-10: Tests - Crush and load resistance]

Titre français non disponible

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée

[Compilation of Comments on 86B/4204/CD - IEC 61753-111-8 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for Category G - Ground]

Titre français non disponible

[Compilation of Comments on 86B/4217/CD - IEC 61753-1/AMD1 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance]

Titre français non disponible

[PNW 86B-4252: Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces-
Part X: Type SAC connector family]

Titre français non disponible

[Compilation of Comments on 86B/4208/CD - IEC 61753-071-2 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments]

Titre français non disponible

[Result of Voting on 86B/4206/CDV - IEC 61753-061-2 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C – Controlled environments]

Titre français non disponible

[Result of Voting on 86B/4207/CDV - IEC 61977 ED4: Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification]

Titre français non disponible

[Result of Voting on 86B/4231/DPAS - IEC PAS 63267-3-31 ED1: Fibre optic connector optical interfaces - Part 3-31: End face geometry flat PC end face PPS rectangular ferrule, multimode fibres]

Titre français non disponible

[Compilation of Comments on 86B/4211/CD - IEC 61300-2-56 ED1: Fibre optic interconnecting devices and passive components – Basic test and measurement procedure – Part 2-56: Tests – Wind resistance of mounted housing]

Titre français non disponible

[Result of Voting on 86B/4210/CDV - IEC 61300-2-4/AMD1 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention]

Titre français non disponible

[Result of Voting on 86B/4232/FDIS - IEC 61300-2-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas)]

Titre français non disponible

[List of decisions taken at the meeting of SC 86B, held in Shanghai, People's Republic of China from 2019-10-21 14:00AM to 2018-10-21 17:00PM]

Titre français non disponible

[Review report on IEC 60874-1/Ed6: Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification IEC 60874-1-1/Ed3: Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification IEC 61314-1/Ed4: Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification IEC 61314-1-1/Ed3: Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification IEC 61274-1/Ed3: Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification IEC 61274-1-1/Ed3: Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification ]

Titre français non disponible

[IEC 61300-3-27 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-27: Examinations and measurements - Method for measurement of guide-hole and fibre hole/core position of rectangular ferrules]

Titre français non disponible

[Result of Voting on 86B/4212/CDV - IEC 61300-3-55 ED1: Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-55:Examinations and measurements – Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components]

Titre français non disponible

[Compilation of Comments on 86B/4226/CD - IEC 61755-3-1 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connector parameters of dispersion unshifted single mode physically contacting fibres – non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 1]

Titre français non disponible

[Compilation of Comments on 86B/4227/CD - IEC 61755-3-2 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-2: Connector parameters of dispersion unshifted single mode physically contacting fibres – Angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 1]

Titre français non disponible

[Compilation of Comments on 86B/4027/CD - IEC 61300-3-27/Ed2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-27: Examinations and measurements - Measurement method for the hole and/or core location of rectangular ferrules]

Titre français non disponible

[Compilation of Comments on 86B/4166/CD - IEC 61300-3-53 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -Part 3-53: Examinations and Measurements – Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) ]

Titre français non disponible

[Compilation of Comments on 86B/4222/CD - IEC 61755-3-11 ED1:

Fibre optic interconnecting devices and passive components – Connector optical interfaces –Part 3-11: Connector parameters of dispersion unshifted single mode physically contacting fibres - non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 3

Titre français non disponible

[Compilation of Comments on 86B/4223/CD - IEC 61755-3-12 ED1: Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-12: Connector parameters of dispersion unshifted single mode physically contacting fibres – angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[Result of Voting on 86B/4228/FDIS - IEC 61756-1 ED2: Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance]

Titre français non disponible

[Revised draft agenda for the meeting to be held in Shanghai EXPO Center, China, from 2019-10-21 (starting time:14:00) to 2019-10-21 (approximate finishing time:18:00)]

Titre français non disponible

[Result of Voting on 86B/4210/CDV - IEC 61300-2-4/AMD1 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention]

Titre français non disponible

[Compilation of Comments on 86B/4217/CD - IEC 61753-1/AMD1 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance]

Titre français non disponible

[Result of Voting on 86B/4206/CDV - IEC 61753-061-2 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C – Controlled environments]

Titre français non disponible

[Result of Voting on 86B/4207/CDV - IEC 61977 ED4: Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification]

Titre français non disponible

[Review of Active Participation of P-members in the Work of SC 86B]

Titre français non disponible

IEC 61300-2-54 ED1: Dispositifs d'interconnexion et composants passifs fibroniques - Méthodes fondamentales d'essais et de mesures - Partie 2-54: Essais – Atmosphère corrosive (mélange de gaz)

[IEC PAS 63267-3-31 ED1: Fibre optic connector optical interfaces - Part 3-31: End face geometry flat PC end face PPS rectangular ferrule, multimode fibres]

Titre français non disponible

[Result of Voting on 86B/4218/FDIS - IEC 61300-3-21 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time]

Titre français non disponible

IEC 61756-1 ED2: Dispositifs d’interconnexion et composants passifs fibroniques – Norme d’interface pour les systèmes de gestion de fibres - Partie 1: Généralités et recommandations

[PNW 86B-4229: FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS –
CONNECTOR OPTICAL INTERFACES – Part 1: Optical interfaces for multimode fibres - General and guidance]

Titre français non disponible

[IEC 61755-3-1 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connector parameters of dispersion unshifted single mode physically contacting fibres – non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 1]

Titre français non disponible

[IEC 61755-3-2 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-2: Connector parameters of dispersion unshifted single mode physically contacting fibres – Angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 1]

Titre français non disponible

[Result of Voting on 86B/4148/CDV - IEC 61300-2-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas) ]

Titre français non disponible

[Compilation of Comments on 86B/4173/CD - IEC 61755-3-2 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia angled PC ferrules, core location variant 1, non-dispersion shifted single mode fibres]

Titre français non disponible

[Compilation of Comments on 86B/4172/CD - IEC 61755-3-1 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia PC ferrules, core location variant 1, non-dispersion shifted single mode fibres]

Titre français non disponible

[IEC 61755-3-11 ED1:

Fibre optic interconnecting devices and passive components – Connector optical interfaces –Part 3-11: Connector parameters of dispersion unshifted single mode physically contacting fibres - non-angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 3

Titre français non disponible

[IEC 61755-3-12 ED1: Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-12: Connector parameters of dispersion unshifted single mode physically contacting fibres – angled 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[Compilation of Comments on 86B/4208/CD - IEC 61753-071-2 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 071-2: Non-connectorized single-mode fibre optic 1 × 2 and 2 × 2 spatial switches for category C - Controlled environments]

Titre français non disponible

[Compilation of Comments on 86B/4204/CD - IEC 61753-111-8 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for Category G - Ground]

Titre français non disponible

[Compilation of Comments on 86B/4169/CD - IEC 61755-3-12 Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-12: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - angled cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[Compilation of Comments on 86B/4168/CD - IEC 61755-3-11 Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-11: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - non-angled cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[Compilation of Comments on 86B/4211/CD - IEC 61300-2-56 ED1: Fibre optic interconnecting devices and passive components – Basic test and measurement procedure – Part 2-56: Tests – Wind resistance of mounted housing]

Titre français non disponible

[Compilation of Comments on 86B/4197/CD - IEC 61753-085-2 ED2: Fibre optic interconnecting devices and passive components performance standard - Part 085-2: Non-connectorized single-mode pigtailed CWDM devices for category C - Controlled environment]

Titre français non disponible

IEC 61300-3-55 ED1: Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-55 : Examens et mesures Rapport d’extinction de polarisation et précision du détrompage des composants optiques passifs maintenant la polarisation

IEC 61300-3-21 ED3: Dispositifs d’interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-21: Examens et mesures – Temps de commutation

[Compilation of Comments on 86B/4209/CD - IEC 61300-3-7 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components]

Titre français non disponible

IEC 61300-2-4/AMD1 ED2: Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-4: Essais - Rétention de la fibre ou du câble

IEC 61753-061-2 ED2: Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 061-2 : Isolateurs fibroniques à fibres unimodales munis de fibres amorces non connectorisées pour la catégorie C – Environnements contrôlés

IEC 61977 ED4: Dispositifs d'interconnexion et composants passifs fibroniques - Filtres fibroniques fixes - Spécification générique

Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 1 : Généralités et recommandations

[Result of Voting on 86B/4203/FDIS - IEC 61300-3-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-54: Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axis for cylindrical ferrules]

Titre français non disponible

[Replaced by 86B/4216A/DA]

Titre français non disponible

IEC 61753-1/AMD1 ED2: Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 1 : Généralités et recommandations

[Result of Voting on 86B/4138/CDV - IEC 61756-1 ED2: Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance]

Titre français non disponible

[Result of Questionnaire on 86B/4201/Q: Amendment for IEC 61753-1 Ed2]

Titre français non disponible

[IEC 61300-2-56 ED1: Fibre optic interconnecting devices and passive components – Basic test and measurement procedure – Part 2-56: Tests – Wind resistance of mounted housing]

Titre français non disponible

[Compilation of Comments on 86B/4140/CD - IEC 61300-3-55 ED1: Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-55:Examinations and measurements – Polarisation extinction ratio and keying accuracy of polarisation maintaining, passive, optical components ]

Titre français non disponible

[Compilation of Comments on 86B/4154/CD - IEC 61300-2-56 ED1: Fibre optic interconnecting devices and passive components – basic test and measurement procedure – Part 2-56: Tests – Wind resistance of mounted housing ]

Titre français non disponible

[Compilation of Comments on 86B/4177/CD - IEC 61300-2-4/AMD1 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention]

Titre français non disponible

IEC 61300-3-54 ED1: Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 3-54: Examens et mesures – Erreur d’alignement angulaire entre l’axe de l’alésage de férule et l'axe de férule pour les férules cylindriques

[IEC 61753-111-8 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 111-8: Sealed closures for Category G - Ground]

Titre français non disponible

[Result of Voting on 86B/4165/CDV - IEC 61754-35 ED1: Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces - Part 35: Type LSHE connector series for harsh environments ]

Titre français non disponible

IEC 61753-071-2 ED2: Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C - Environnements contrôlés

[IEC 61300-3-7 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components]

Titre français non disponible

[Revised result of Voting on 86B/4085/CDV - IEC 61300-3-21 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time]

Titre français non disponible

[Compilation of Comments on 86B/4104/CD - IEC 61300-3-7 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components]

Titre français non disponible

[Compilation of Comments on 86B/4156/CD - IEC 61977 ED4: Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification]

Titre français non disponible

[Compilation of Comments on 86B/4157/CD - IEC 61753-061-2 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C – Controlled environments]

Titre français non disponible

Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 071-2: Commutateurs spatiaux optiques unimodaux 1 × 2 et 2 × 2 non connectorisés pour la catégorie C - Environnements contrôlés

[Amendment for IEC 61753-1 Ed2]

Titre français non disponible

Dispositifs d'interconnexion et composants passifs à fibres optiques norme de qualité de fonctionnement - Partie 111-8: Boîtiers scellés pour Catégorie G - Au niveau du sol

IEC 61753-085-2 ED2: Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 085-2: Dispositifs CWDM à fibre amorce unimodale non connectorisés de catégorie C - Environnement contrôlé

[Compilation of Comments on 86B/4173/CD - IEC 61755-3-2 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia angled PC ferrules, core location variant 1, non-dispersion shifted single mode fibres]

Titre français non disponible

[Compilation of Comments on 86B/4172/CD - IEC 61755-3-1 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia PC ferrules, core location variant 1, non-dispersion shifted single mode fibres]

Titre français non disponible

Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 085-2: Dispositifs CWDM à fibre amorce unimodale non connectorisés de catégorie C - Environnement contrôlé

[Compilation of Comments on 86B/4177/CD - IEC 61300-2-4/AMD1 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention]

Titre français non disponible

[Compilation of Comments on 86B/4178/CD - IEC 61754-7-4 ED1: Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 7-4: Type MPO connector family – One fibre row 16 fibres wide]

Titre français non disponible

[Compilation of Comments on 86B/4169/CD - IEC 61755-3-12 Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-12: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - angled cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[Compilation of Comments on 86B/4168/CD - IEC 61755-3-11 Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-11: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - non-angled cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[Compilation of Comments on 86B/4174/CD - IEC 61300-2-6 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism]

Titre français non disponible

[Result of Voting on 86B/4176/FDIS - IEC 61754-7-3 ED1: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-3: Type MPO connector family - Two fibre rows 16 fibre wide]

Titre français non disponible

[Result of Voting on 86B/4148/CDV - IEC 61300-2-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas) ]

Titre français non disponible

[Compilation of Comments on 86B/4166/CD - IEC 61300-3-53 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -Part 3-53: Examinations and Measurements – Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) ]

Titre français non disponible

[Compilation of Comments on 86B/4161/CD - IEC 61300-3-35 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers]

Titre français non disponible

[Compilation of Comments on 86B/4162/CD - IEC 61755-2-1 ED2: Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-1: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - non-angled]

Titre français non disponible

[Compilation of Comments on 86B/4163/CD - IEC 61755-2-2 ED2: Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 2-2: Connection parameters of non-dispersion shifted single-mode physically contacting fibres - angled]

Titre français non disponible

[Result of Voting on 86B/4145/CDV - IEC 61754-4 ED3: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family]

Titre français non disponible

[Result of Voting on 86B/4146/CDV - IEC 61754-6 ED3: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family]

Titre français non disponible

[Compilation of Comments on 86B/4156/CD - IEC 61977 ED4: Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification]

Titre français non disponible

[Compilation of Comments on 86B/4157/CD - IEC 61753-061-2 ED2: Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C – Controlled environments]

Titre français non disponible

[Result of Voting on 86B/4167/FDIS - IEC 61300-2-46 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic]

Titre français non disponible

[Compilation of Comments on 86B/4154/CD - IEC 61300-2-56 ED1: Fibre optic interconnecting devices and passive components – basic test and measurement procedure – Part 2-56: Tests – Wind resistance of mounted housing ]

Titre français non disponible

[Result of Voting on 86B/4133/CDV - IEC 61300-3-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-54: Examinations and measurements - Angular misalignment between ferrule bore axis and ferrule axes for cylindrical ferrules]

Titre français non disponible

IEC 61754-35 ED1: Dispositifs d’interconnexion et composants passifs fibroniques - Interfaces de connecteurs fibroniques - Partie 35 : Série de connecteurs de type LSHE pour environnements hostiles

IEC 61754-7-3 ED1: Dispositifs d'interconnexion et composants passifs à fibres optiques – Interfaces de connecteurs à fibres optiques – Partie 7-3: Famille de connecteurs de type MPO – Deux rangées de 16 fibres

IEC 61300-2-4/AMD1 ED2: Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-4: Essais - Rétention de la fibre ou du câble

[IEC 61754-7-4 ED1: Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 7-4: Type MPO connector family – One fibre row 16 fibres wide]

Titre français non disponible

[Compilation of Comments on 86B/4090/CD - IEC 61754-7-4 ED1: Fibre optic interconnecting devices and passive components – Fibre optic connector interfaces – Part 7-4: Type MPO connector family – One fibre rows 16 fibre wide]

Titre français non disponible

IEC 61300-2-6 ED3: Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-6: Essais - Résistance à la traction du mécanisme de couplage

Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d'essais et de mesures - Partie 2-4: Essais - Rétention de la fibre ou du câble

[Compilation of Comments on 86B/4095/CD - IEC 61300-2-6 ED3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism]

Titre français non disponible

IEC 61300-2-54 ED1: Dispositifs d'interconnexion et composants passifs fibroniques - Méthodes fondamentales d'essais et de mesures - Partie 2-54: Essais – Atmosphère corrosive (mélange de gaz)

Interfaces optiques de connecteurs pour fibres optiques - Partie 3-1: Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, fibres unimodales

Interfaces optiques de connecteurs pour fibres optiques - Partie 3-2: Interfaces optiques, férules PC en zircone plein cylindrique de diamètre 2,5 mm et 1,25 mm, pour fibres unimodales à angle PC de 8 degrés

[IEC 61755-3-1 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia PC ferrules, core location variant 1, non-dispersion shifted single mode fibres]

Titre français non disponible

[IEC 61755-3-2 ED2: Fibre optic interconnecting devices and passive components – Connector optical interfaces – Part 3-1: Connection parameters for 1,25 mm and 2,5 mm diameter cylindrical full zirconia angled PC ferrules, core location variant 1, non-dispersion shifted single mode fibres]

Titre français non disponible

IEC 61300-2-46 ED2: Dispositifs d'interconnexion et composants passifs fibroniques - Méthodes fondamentales d'essais et de mesures - Partie 2-46 : Essais - Chaleur humide, essai cyclique

[IEC 61755-3-11 Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-11: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - non-angled cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[IEC 61755-3-12 Fibre Optic Interconnecting Devices and Passive Components - Connector Optical Interfaces - Part 3-12: Connector parameters for connections of non-dispersion shifted single mode physically contacting fibres - angled cylindrical full zirconia ferrules, core location variant 3]

Titre français non disponible

[IEC 61300-2-54 ED1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas) ]

Titre français non disponible

[Review report on IEC 61300-3-53/Ed1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far field data from step index multimode waveguide (including fibre)]

Titre français non disponible

[IEC 61300-3-53 ED2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -Part 3-53: Examinations and Measurements – Encircled angular flux (EAF) measurement method based on two-dimensional far field data from multimode waveguide (including fibre) ]

Titre français non disponible