[Next TC 91 Working Group meetings to be held in Tokyo, Japan from 1 to 4 June 2020 (online registration)]

Titre français non disponible

[IEC 62878-2-601 ED1: Device Embedding assembly technology - Part 2-602: Guideline for stacked electronic module - Evaluation method of inter-module electrical connectivity]

Titre français non disponible

IEC 61760-2 ED3: Technique du montage en surface - Partie 2: Conditions de transport et de stockage des composants pour montage en surface (CMS) - Guide d'application

[Result of Voting on 91/1594/NP - PNW 91-1594: Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 2-X: Test methods for materials for interconnection structures–Measurement of Resilience strength and Resilience strength Retention Factor of Flexible Dielectric Materials]

Titre français non disponible

[Compilation of Comments on 91/1588/CD - IEC 61760-3 ED2: Surface mounting technology - Part 3: Standard method for the specification of components for through hole reflow (THR) soldering]

Titre français non disponible

[Replaced by 91/1628A/INF]

Titre français non disponible

[IEC 63251 ED1: Test Method for Mechanical Property of Flexible Opto-Electric Circuit Boards under Thermal Stress]

Titre français non disponible

[Compilation of Comments on 91/1587/CD - IEC 60068-2-20 ED6: Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads]

Titre français non disponible

[Compilation of Comments on 91/1584/CD - IEC 60068-2-21 ED7: Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices]

Titre français non disponible

[IEC 61189-5-301 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-301: Test methods for printed board assemblies - Soldering paste using fine solder particles]

Titre français non disponible

[Result of Voting on 91/1579/CDV - IEC 61189-5-504 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-504: General test methods for materials and assemblies - Process ionic contamination testing (PICT)]

Titre français non disponible

[Compilation of Comments on 91/1604/CD - IEC 61188-6-2 ED1: Printed boards and printed board assemblies - Design and use - Part 6-2: Land pattern design - Description of land pattern for the most common surface mounted components (SMD)]

Titre français non disponible

[Report of the meeting held in Shanghai, China on 25th October 2019 from 09:00 h to 16:00 h]

Titre français non disponible

[List of decisions taken at the meeting of TC 91, held in Shanghai, China from 2019-10-25]

Titre français non disponible

[Liaison Reports]

Titre français non disponible

[PNW 91-1617: Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-805: X/Y CTE Test for Thin Base Materials by TMA]

Titre français non disponible

[Revised draft agenda for the meeting to be held in Shanghai, China, from 2019-10-25 (starting time: 9:00) to 2019-10-25 (approximate finishing time: 16:00)]

Titre français non disponible

IEC 61760-1 ED3: Technique du montage en surface - Partie 1 : Méthode normalisée pour la spécification des composants montés en surface (CMS)

[Result of Voting on 91/1597/FDIS - IEC 62878-1 ED1: Device embedding assembly technology - Part 1: Generic specification for device embedded substrates]

Titre français non disponible

IEC 61189-5-601 ED1: Méthodes d’essai pour les matériaux électriques, les cartes imprimées et autres structures d’interconnexion et ensembles - Partie 5-601 : Méthodes d’essai générales pour les matériaux et les assemblages - Essai d’aptitude au brasage par refusion pour un joint brasé, et essai de résistance à la chaleur de refusion pour les cartes imprimées

[IEC 61760-1 ED3: Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)]

Titre français non disponible

[Comments received on 91/1600/DC: Call for comments / proposals on the working draft guide: Guidelines for defining halogen content terminology in IEC publications]

Titre français non disponible

[Compilation of Comments on 91/1543/CD - IEC 61189-2-801 ED1: Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 2-801: Thermal conductivity test for base materials]

Titre français non disponible

[Compilation of Comments on 91/1545/CD - IEC 61189-2-803 ED1: Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 2-803: Test methods for Z-Axis Expansion of base materials and printed board]

Titre français non disponible

[Compilation of Comments on 91/1546/CD - IEC 61189-2-804 ED1: Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 2-804: Test methods for time to delamination – T260, T288, T300]

Titre français non disponible

[Compilation of Comments on 91/1548/CD - IEC 61249-6-3 ED1: Materials for printed boards and other interconnecting structures – Part 6-3: Sectional specification set for reinforcement materials - Specification for finished fabric woven from “E” glass for printed boards ]

Titre français non disponible

[Review of Active Participation of P-members in the Work of TC 91]

Titre français non disponible

[Result of Voting on 91/1581/NP - PNW 91-1581 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-301: Test methods for printed board assemblies - Soldering paste using fine solder powders]

Titre français non disponible

[Result of Questionnaire on 91/1591/Q: Proposal for a new title for IEC 61188 series]

Titre français non disponible

[Compilation of Comments on 91/1569/CD - IEC 61189-5-501 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-501: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of solder fluxes]

Titre français non disponible

[Compilation of Comments on 91/1571/CD - IEC 61189-5-502 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-502: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of assemblies]

Titre français non disponible

[Replaced by 91/1608A/INF]

Titre français non disponible

IEC 62878-1 ED1: Techniques d'assemblage avec appareil(s) intégré(s) - Partie 1 : Spécification générique pour substrats avec appareil(s) intégré(s)

[Resignation and nomination of TC 91 WG 15 co-convener ]

Titre français non disponible

[IEC 61188-6-2 ED1: Printed boards and printed board assemblies - Design and use - Part 6-2: Land pattern design - Description of land pattern for the most common surface mounted components (SMD)]

Titre français non disponible

[PNW 91-1594: Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 2-X: Test methods for materials for interconnection structures–Measurement of Resilience strength and Resilience strength Retention Factor of Flexible Dielectric Materials]

Titre français non disponible

[Result of Voting on 91/1583/DTR - IEC TR 61191-7 ED1: Printed board assemblies - Part 7: Technical cleanliness of components and printed board assemblies]

Titre français non disponible

[Outlines of the proposed IEEE standards offered by IEEE to be adopted as IEC/IEEE dual-logo publications in TC 91]

Titre français non disponible

[Compilation of Comments on 91/1534/CD - IEC 61760-1 ED3: Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)]

Titre français non disponible

[Compilation of Comments on 91/1518/CD - IEC 61189-5-601 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability test for solder joint, and reflow heat resistance test for printed boards]

Titre français non disponible

[Call for comments / proposals on the working draft guide: Guidelines for defining halogen content terminology in IEC publications]

Titre français non disponible

[Review report of IEC 61188-5-2 to 61188-5-6 Ed.1 and IEC 61188-5-8 Ed.1]

Titre français non disponible

[PNW 91-1593: Test methods for electrical materials, printed board and other interconnection structures and assemblies – Part 2-XXX: Test methods for materials for interconnection structures – Decomposition Temperature (Td) using TGA]

Titre français non disponible

[Compilation of Comments on 91/1554/CD - IEC 61188-6-1 ED1: Circuit boards and circuit board assemblies – Design and use – Part 6-1: Land pattern design - Generic requirements for land pattern on circuit boards]

Titre français non disponible

Technique du montage en surface - Partie 2: Conditions de transport et de stockage des composants pour montage en surface (CMS) - Guide d'application

[IEC 60068-2-20 ED6: Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads]

Titre français non disponible

IEC 61760-3 ED2: Technique du montage en surface - Partie 3 : Méthode normalisée relative à la spécification des composants pour le brasage par refusion à trous traversants (THR, Through Hole Reflow)

[Result of Voting on 91/1557/CDV - IEC 62878-2-5 ED1: Device embedded substrate - Part 2-5: Implementation of a 3D data format for device embedded substrate]

Titre français non disponible

[PNW 91-1590: MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES – Part 6-11: Sectional specification set for reinforcement materials – Specification for finished fabric woven from “Low Dk” glass for printed boards]

Titre français non disponible

[Proposal for a new title for IEC 61188 series]

Titre français non disponible

IEC 60194-1 ED1: Conception, fabrication et assemblage de cartes imprimées - Vocabulaire - Partie 1: Usage commun des techniques d’assemblage des composants électroniques et des cartes imprimées

IEC 61189-5-504 ED1: Méthodes d’essai pour les matériaux électriques, les cartes imprimées et autres structures d’interconnexion et ensembles - Partie 5-504: Méthodes d’essai générales pour les matériaux et les ensembles - Essai de contamination ionique des procédés (PICT)

IEC 60068-2-21 ED7: Essais d'environnement - Partie 2-21: Essais - Essai U: Robustesse des sorties et des dispositifs de montage incorporés

[Draft agenda for the meeting to be held in Shanghai, China, from 2019-10-25 (starting time: 9:00) to 2019-10-25 (approximate finishing time: 16:00)]

Titre français non disponible

[PNW 91-1581 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-301: Test methods for printed board assemblies - Soldering paste using fine solder powders]

Titre français non disponible

[Result of Voting on 91/1558/NP - PNW 91-1558: Test Method for Mechanical Property of Flexible Optic-Electric Circuit Boards under Thermal Stress]

Titre français non disponible

[IEC TR 61191-7 ED1: Printed board assemblies - Part 7: Technical cleanliness of components and printed board assemblies]

Titre français non disponible

[Result of Voting on 91/1566/FDIS - IEC 60068-2-69/AMD1 ED3: Environmental testing - Part 2-69: Tests - Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method]

Titre français non disponible

[Result of Voting on 91/1550/CDV - IEC 62878-1 ED1: Device embedding assembly technology - Part 1: Generic specification for device embedded substrates]

Titre français non disponible

[Result of Voting on 91/1500/DTR - An intercomparison evaluation to implement the use of fine pitch test structures for surface insulation resistance (SIR) testing of solder fluxes according to IEC 61189-5-501]

Titre français non disponible

[Result of Voting on 91/1561/FDIS - IEC 61188-6-4 ED1: Printed boards and printed board assemblies - Design and use - Part 6-4: Land pattern design – Generic requirements for dimensional drawings of surface mounted components (SMD) from the viewpoint of land pattern design]

Titre français non disponible

[Result of Voting on 91/1562/FDIS - IEC 60068-2-82 ED2: Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for components and parts used in electronic assemblies ]

Titre français non disponible

[Result of Voting on 91/1514/NP - PNW 91-1514: PRINTED BOARDS AND PRINTED BOARD ASSEMBLIES – DESIGN AND USE Part 8: 3D shape data specification for CAD component library. ]

Titre français non disponible

[Result of Voting on 91/1551/NP - PNW 91-1551: Device Embedding assembly technology - Part 2-601: Guide line - Evaluation method of electrical connectivity]

Titre français non disponible

[Review report of IEC 61192-2 Ed.1: Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies]

Titre français non disponible

[Review report of IEC 61192-3 Ed.1: Workmanship requirements for soldered electronic assemblies - Part 3: Through-hole mount assemblies ]

Titre français non disponible

[Review report of IEC 61192-4 Ed.1: Workmanship requirements for soldered electronic assemblies - Part 4: Terminal assemblies ]

Titre français non disponible

[Comments received on 91/1560/DC: Revision of IEC 61760-3 Edition 1.0 and call for experts for maintenance team]

Titre français non disponible

Technique du montage en surface - Partie 3 : Méthode normalisée relative à la spécification des composants pour le brasage par refusion à trous traversants (THR, Through Hole Reflow)

[IEC 61189-5-501 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-501: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of solder fluxes]

Titre français non disponible

[Review report of IEC 61189-5 Ed.1 and IEC 61189-6 Ed.1: Test methods for electrical materials, interconnection structures and assemblies - Part 5: Test methods for printed board assemblies and Part 6: Test methods for materials used in manufacturing electronic assemblies]

Titre français non disponible

[IEC 61189-5-502 ED1: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-502: General test methods for materials and assemblies - Surface insulation resistance (SIR) testing of assemblies]

Titre français non disponible

IEC 60068-2-69/AMD1 ED3: Essais d'environnement - Partie 2-69: Essais - Essai Te/Tc : Essai de brasabilité des composants électroniques et cartes imprimées par la méthode de la balance de mouillage (mesure de la force)

[Comments received on 91/1555/DC: Call for comments on proposed Technical Report on “Technical cleanliness of components and printed board assemblies” as a joint project between WG 1 and WG 2]

Titre français non disponible

IEC 62878-2-5 ED1: Substrat avec appareil(s) intégré(s) - Partie 2-5: Mise en œuvre d’un format de données 3D pour un substrat avec appareil(s) intégré(s)

[Result of Questionnaire on 91/1556/Q: Questionnaire on the nomination of a convenor of TC 91/WG 2: Requirements for electronics assemblies]

Titre français non disponible

IEC 61188-6-4 ED1: Cartes imprimées et cartes imprimées équipées - Conception et utilisation - Partie 6-4: Conception de la zone de report – Exigences génériques pour les dessins dimensionnels de composants montés en surface (CMS) du point de vue de la conception de la zone de report

IEC 60068-2-82 ED2: Essais d'environnement - Partie 2-82: Essais - Essai XW1: Méthodes de vérification des trichites pour les composants et les pièces utilisés dans les ensembles électroniques

[Next TC 91 Working Group meetings to be held in Frankfurt, Germany from 20 to 24 May 2019 (on-line registration)]

Titre français non disponible

[Result of Voting on 91/1495/CDV - IEC 60068-2-82 ED2: Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for components and parts used in electronic assemblies]

Titre français non disponible

[Result of Voting on 91/1553/DTR - IEC TR 62878-2-7 ED1: Device embedding assembly technology - Part 2-7: Guidelines - Accelerated stress testing of passive embedded circuit boards]

Titre français non disponible

[Maintenance – Call for comments / proposals for amendment / revisions on IEC 61760-3 Ed. 1.0 and call for experts for maintenance team]

Titre français non disponible

[PNW 91-1558: Test Method for Mechanical Property of Flexible Optic-Electric Circuit Boards under Thermal Stress]

Titre français non disponible

[Call for comments on proposed Technical Report on “Technical cleanliness of components and printed board assemblies” as a joint project between WG 1 and WG 2]

Titre français non disponible

[Questionnaire on the nomination of a convenor of TC 91/WG 2: Requirements for electronics assemblies]

Titre français non disponible

IEC 62878-1 ED1: Techniques d'assemblage avec appareil(s) intégré(s) - Partie 1 : Spécification générique pour substrats avec appareil(s) intégré(s)

[IEC 61188-6-1 ED1: Circuit boards and circuit board assemblies – Design and use – Part 6-1: Land pattern design - Generic requirements for land pattern on circuit boards]

Titre français non disponible

[IEC TR 62878-2-7 ED1: Device embedding assembly technology - Part 2-7: Guidelines - Accelerated stress testing of passive embedded circuit boards]

Titre français non disponible