SC 46F

Edition 2.0 (2016-05-18)

Hollow metallic waveguides - Part 1: General requirements and measuring methods

Edition 3.0 (2016-05-18)

Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides

Edition 1.0 (1964-01-01)

Hollow metallic waveguides. Part 3: Relevant specifications for flat rectangular waveguides

Edition 3.0 (2017-08-16)

Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides

Edition 1.0 (1967-01-01)

Hollow metallic waveguides - Part 6: Relevant specifications for medium flat rectangular waveguides

Edition 1.0 (1977-01-01)

Amendment 1 - Hollow metallic waveguides - Part 6: Relevant specifications for medium flat rectangular waveguides

Edition 1.0 (1972-01-01)

Hollow metallic waveguides - Part 7: Relevant specifications for square waveguides

Edition 3.0 (2016-05-18)

Flanges for waveguides - Part 1: General requirements

Edition 3.0 (2016-07-05)

Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides

Edition 2.0 (1982-01-01)

Flanges for waveguides. Part 3: Relevant specifications for flanges for flat rectangular waveguides

Edition 2.0 (2017-03-22)

Flanges for waveguides - Part 4: Relevant specifications for flanges for circular waveguides

Edition 1.0 (1983-01-01)

Flanges for waveguides. Part 6: Relevant specifications for flanges for medium flat rectangular waveguides

Edition 1.0 (1974-01-01)

Flanges for waveguides - Part 7: Relevant specifications for flanges for square waveguides

Edition 2.0 (1987-03-30)

Radio-frequency connectors. Part 1: General requirements and measuring methods

Edition 2.0 (1996-02-07)

Amendment 1 - Radio-frequency connectors. Part 1: General requirements and measuring methods

Edition 1.0 (1987-03-30)

Radio-frequency connectors - Part 1: General requirements and measuring methods - Section One: Electrical tests and measuring procedures: Reflection factor

Edition 1.0 (1988-06-15)

Radio-frequency connectors - Part 1: General requirements and measuring methods - Section Three: Electrical tests and measuring procedures: Screening effectiveness

Edition 1.0 (1996-12-12)

Amendment 1 - Radio-frequency connectors - Part 1: General requirements and measuring methods - Section Three: Electrical tests and measuring procedures: Screening effectiveness

Edition 1.0 (1965-01-01)

Radio-frequency connectors - Part 3: Two-pin connector for twin balanced aerial feeders

Edition 1.0 (1970-01-01)

Radio-frequency connectors. Part 5: R.F. coaxial connectors for cables 96 IEC 50-17 and larger

Edition 1.0 (1971-02-01)

Corrigendum 1 - Radio-frequency connectors. Part 5: R.F. coaxial connectors for cables 96 IEC 50-17 and larger

Edition 1.0 (1971-01-01)

Radio-frequency connectors. Part 6: R.F. coaxial connectors for cables 96 IEC 75-17 and larger

Edition 1.0 (1975-01-01)

Radio-frequency connectors - Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)

Edition 1.0 (1993-09-06)

Amendment 1 - Radio-frequency connectors. Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)

Edition 1.0 (1978-01-01)

Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)

Edition 1.0 (1996-03-20)

Amendment 1 - Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)

Edition 1.0 (1983-01-01)

Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)

Edition 1.0 (1986-01-01)

Amendment 1 - Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)

Edition 1.0 (1996-03-20)

Amendment 2 - Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)

Edition 1.0 (1977-01-01)

Radio-frequency connectors - Part 11: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with screw coupling - Characteristic impedance 50 ohms (Type 4.1/9.5)

Edition 1.0 (1979-01-01)

Radio-frequency connectors - Part 12: R.F. coaxial connectors with screw coupling, unmatched (Type UHF)

Edition 1.0 (1976-01-01)

Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6) with similar mating dimensions

Edition 1.0 (1996-03-07)

Amendment 1 - Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6) with similar mating dimensions

Edition 1.0 (1980-01-01)

Radio-frequency connectors. Part 17: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)

Edition 1.0 (1993-04-26)

Amendment 1 - Radio-frequency connectors. Part 17: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)

Edition 1.0 (1985-01-01)

Radio-frequency connectors. Part 20: R.F. coaxial connectors with inner diameter of outer conductor of 2.08 mm (0.082 in) screw coupling. Characteristic impedance 50 ohms (Type SSMC)

Edition 1.0 (1985-01-01)

Radio-frequency connectors. Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (Types SC-A and SC-B)

Edition 1.0 (1996-01-23)

Amendment 1 - Radio-frequency connectors. Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (Types SC-A and SC-B)

Edition 1.0 (1985-01-01)

Radio-frequency connectors. Part 22: R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)

Edition 1.0 (1991-12-15)

Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)

Edition 1.0 (1992-03-31)

Radio-frequency connectors - Part 25: Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)

Edition 1.0 (1994-01-31)

Radio-frequency connectors - Part 27: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (Type E)

Edition 1.0 (1994-01-31)

Radio-frequency connectors - Part 28: Radio-frequency coaxial connectors with inner diameter of outer conductor of 5,60 mm (0,220 in) with snap-on coupling - Characteristic impedance 75 ohms

Edition 2.0 (1989-01-30)

Sealing test for pressurized waveguide tubing and assemblies

Edition 2.0 (1996-04-12)

General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2: Detail specifications

Edition 1.0 (1971-01-01)

Guide for choosing modular dimensions for waveguide components

Edition 1.0 (1974-01-01)

Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods

Edition 1.0 (1974-01-01)

Rigid precision coaxial and their associated precision connectors. Part 2: 50 ohms 7 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector

Edition 2.0 (1980-01-01)

Rigid precision coaxial and their associated precision connectors. Part 3: 14 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedances 50 ohms and 75 ohms

Edition 2.0 (1978-01-01)

Rigid precision coaxial and their associated precision connectors. Part 4: 21 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedance 50 ohms (Type 9/21) - Characteristic impedance 75 ohms (Type 6/21)

Edition 1.0 (1984-01-01)

Rigid precision coaxial and their associated precision connectors. Part 5: 50 ohms 3.5 mm rigid precision coaxial line with provision for mounting connectors

Edition 1.0 (1979-01-01)

Flexible waveguide assembly performance

Edition 1.0 (1984-01-01)

Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors

Edition 1.0 (1995-11-16)

Amendment 1 - Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors

Edition 1.0 (1992-04-15)

Upper frequency limit of r.f. coaxial connectors

Edition 2.0 (2013-07-10)

Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods

Edition 2.0 (2016-02-10)

Corrigendum 1 - Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods

Edition 1.0 (1996-03-13)

Radio frequency connectors - Part 1-1: Single multi-series dual language blank detail specification (BDS)

Edition 1.0 (2019-09-12)

Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss

Edition 1.0 (2020-07-08)

Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient

Edition 1.0 (2020-10-20)

Radio frequency connectors - Part 1-51: Technical specification of electrical tests - Uncertainty specification of frequency domain test for return loss

Edition 2.0 (2007-02-16)

Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52

Edition 1.0 (2008-04-29)

Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16)

Edition 1.0 (2007-02-16)

Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC)

Edition 1.0 (2017-03-22)

Radio-frequency connectors - Part 11: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 9,5 mm with threaded coupling - characteristic impedance 50 Ω (Type 4,1-9,5)

Edition 1.0 (2010-10-13)

Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12)

Edition 1.0 (2021-01-19)

Radio-frequency connectors - Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 Ω (type SMA)

Edition 1.0 (2006-12-14)

Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristics impedance 50 ohms (75 ohms) (type N)

Edition 1.0 (2011-01-27)

Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA

Edition 1.0 (2011-01-27)

Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB

Edition 3.0 (2019-07-19)

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)

Edition 3.0 (2019-07-19)

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F)

Edition 1.0 (2013-01-29)

Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors

Edition 1.0 (2005-06-23)

Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type 1,0/2,3) - 50 Ω and 75 Ω applications

Edition 1.0 (1999-09-03)

Radio frequency connectors - Part 31: RF coaxial with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0)

Edition 1.0 (1999-07-29)

Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85)

Edition 1.0 (1996-03-20)

Radio-frequency connectors - Part 33: Sectional Specification (SS) for Type BMA R.F. connectors

Edition 1.0 (2011-07-11)

Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors

Edition 1.0 (1996-03-20)

Radio-frequency connectors - Part 36: Microminiature r.f. connectors with snap-on coupling - Characteristic impedance 50 Ohms (Type MCX)

Edition 1.0 (2007-02-16)

Radio-frequency connectors - Part 37: Sectional specification - STWX8 R.F. connectors

Edition 1.0 (2008-11-13)

Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 Ω (type TMA) - 50 Ω applications

Edition 1.0 (2009-06-16)

Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors

Edition 1.0 (2010-11-29)

Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors

Edition 1.0 (2011-02-23)

Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors

Edition 1.0 (2013-01-16)

Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors

Edition 1.0 (2013-03-20)

Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors

Edition 1.0 (2012-12-12)

Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors

Edition 1.0 (2014-05-23)

Radio-frequency connectors - Part 45: Sectional specification for SQMA series quick lock RF coaxial connectors

Edition 2.0 (2015-03-30)

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

Edition 1.0 (2014-10-23)

Radio-frequency connectors - Part 48: Sectional specification for series BMP R.F. coaxial connectors

Edition 1.0 (2014-05-08)

Radio-frequency connectors - Part 49: Sectional specification for SMAA series R.F. connectors

Edition 1.0 (2014-10-23)

Radio-frequency connectors - Part 50: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 4,11 mm with quick lock system - Characteristics impedance 50 Ohm (type QMA)

Edition 1.0 (2015-02-05)

Radio-frequency connectors - Part 51: Sectional specification for RF coaxial connectors with inner diameter of outer conductors 13,5 mm with bayonet lock - Characteristic impedance 50 Ω (type QLI)

Edition 1.0 (2015-06-05)

Radio-frequency connectors - Part 52: Sectional specification for series MMCX RF coaxial connectors

Edition 1.0 (2015-09-16)

Radio-frequency connectors - Part 53: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 16 mm with screw lock - Characteristic impedance 50 Ω (Type S7-16)

Edition 1.0 (2016-09-06)

Radio frequency connectors - Part 54: Sectional specification for coaxial connectors with 10 mm inner diameter of outer conductor, nominal characteristic impedance 50 Ohms, Series 4.3-10

Edition 1.0 (2016-08-16)

Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 Ω (type SBMA)

Edition 1.0 (2017-08-23)

Corrigendum 1 - Radio-frequency connectors - Part 58: Sectional specification for RF coaxial connectors with blind-mate coupling - Characteristic impedance 50 ohms (type SBMA)

Edition 1.0 (2017-05-22)

Radio-frequency connectors - Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors

Edition 1.0 (2021-03-17)

Radio-frequency connectors - Part 60: Sectional specification for RF coaxial connectors with push on mating - Characteristic impedance 50 Ohm (type SMPM)

Edition 1.0 (2020-05-27)

Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9.5 mm inner diameter of outer conductor with quick lock coupling series Q4.1-9.5

Edition 1.0 (2020-05-26)

Radio frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (type BNC75)

Edition 1.0 (2019-09-12)

Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 Ω (type 0,8)

Edition 1.0 (2021-01-19)

Radio-frequency connectors - Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 Ω

Edition 1.0 (2021-02-23)

Radio-frequency connectors - Part 66: Sectional specification for RF coaxial connectors with 5 mm inner diameter of outer conductor, with quick-lock- or screw-coupling, characteristic impedance 50 Ω (series 2,2-5)

Edition 1.0 (1995-11-22)

Measurement of return loss on waveguide and waveguide assemblies

Edition 1.0 (2006-07-24)

Corrigendum 1 - Measurement of return loss on waveguide and waveguide assemblies

Edition 1.0 (1996-06-27)

Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane of polarization

Edition 1.0 (1996-06-11)

Methods of measurement for waveguides - Part 2: Level of intermodulation products

Edition 1.0 (1997-06-24)

Methods of measurement for Waveguides - Part 3: Variation of group delay

Edition 1.0 (1997-08-06)

Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies

Edition 1.0 (2006-07-24)

Corrigendum 1 - Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies

Edition 1.0 (1996-06-11)

Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance

Edition 1.0 (1996-06-27)

Methods of measurement for waveguides - Part 8: Waveguide power holding capability

Edition 1.0 (1996-07-03)

Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces

Edition 1.0 (2008-07-09)

Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods

Edition 1.0 (2010-02-18)

Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

Edition 1.0 (2015-02-17)

Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods

Edition 1.0 (2019-08-16)

Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods

Edition 1.0 (2020-01-28)

Corrigendum 1 - Standard test radio-frequency connectors - Part 1: Generic specification - General requirements and test methods

Edition 1.0 (2019-09-12)

Multi-channel radio frequency connectors - Part 1: Generic specification - General requirements and test methods

Edition 1.0 (2020-12-16)

Multi-channel radio-frequency connectors - Part 2: Sectional specification for MQ4 series circular connectors

Edition 1.0 (2020-12-08)

Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method