SC 48B

Electrical connectors

 
export to xls file

SC 48B Publications (258)

Preview
Reference, Edition, Date, Title
Language
Preview
IEC 60068-2-42:2003

Edition 3.0 (2003-05-22)

Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

EN-FR, ES
Preview
IEC 60068-2-43:2003

Edition 2.0 (2003-05-23)

Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, ES
Preview
IEC 60068-2-46:1982

Edition 1.0 (1982-01-01)

Basic environmental testing procedures - Part 2-46: Tests - Guidance to test Kd: Hydrogen sulphide test for contacts and connections

EN-FR, RU
Preview
IEC 60068-2-49:1983

Edition 1.0 (1983-01-01)

Basic environmental testing procedures - Part 2-49: Tests - Guidance to test Kc: Sulphur dioxide test for contacts and connections

EN-FR, RU
Preview
IEC 60130-1:1988

Edition 2.0 (1988-11-10)

Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods.

EN-FR, RU
Preview
IEC 60130-5:1966

Edition 1.0 (1966-01-01)

Connectors for frequencies below 3 MHz - Part 5: Rectangular multipole connectors with blade contacts

EN-FR, RU
Preview
IEC 60130-9:2011

Edition 4.0 (2011-02-23)

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

EN-FR
Preview
IEC 60130-10:1971

Edition 1.0 (1971-01-01)

Connectors for frequencies below 3 MHz - Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

EN-FR, RU
Preview
IEC 60130-12:1976

Edition 2.0 (1976-01-01)

Connectors for frequencies below 3 MHz - Part 12: Link and test connectors

EN-FR, RU
Preview
IEC 60130-17:1998

Edition 1.0 (1998-02-12)

Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

EN-FR
Preview
IEC 60352-1:1997

Edition 3.0 (1997-08-06)

Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

EN-FR, ES
No preview
IEC 60352-1:1997/COR1:1998

Edition 3.0 (1998-10-07)

Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

EN-FR
Preview
IEC 60352-2:2006+AMD1:2013 CSV

Edition 2.1 (2013-06-27)

Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance

EN-FR
Preview
IEC 60352-2:2006

Edition 2.0 (2006-02-23)

Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

EN-FR
No preview
IEC 60352-2:2006/AMD1:2013

Edition 2.0 (2013-06-27)

Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

EN-FR
Preview
IEC 60352-3:2020

Edition 2.0 (2020-04-09)

Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

EN-FR
Preview
IEC 60352-4:2020

Edition 2.0 (2020-06-11)

Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance

EN-FR
Preview
IEC 60352-5:2020

Edition 5.0 (2020-07-22)

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

EN-FR, EN
Preview
IEC 60352-6:1997

Edition 1.0 (1997-08-26)

Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

EN-FR, ES
Preview
IEC 60352-7:2020

Edition 2.0 (2020-12-16)

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

EN
Preview
IEC 60352-7:2020 RLV

Edition 2.0 (2020-12-16)

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

EN
Preview
IEC 60352-8:2011

Edition 1.0 (2011-02-10)

Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

EN-FR
Preview
IEC 60512-1:2018

Edition 5.0 (2018-10-22)

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification

EN-FR
Preview
IEC 60512-1:2018 RLV

Edition 5.0 (2018-10-22)

Connectors for electrical and electronic equipment - Tests and measurements - Part 1: Generic specification

EN
Preview
IEC 60512-1-1:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

EN-FR, ES
Preview
IEC 60512-1-2:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

EN-FR, ES
Preview
IEC 60512-1-3:1997

Edition 1.0 (1997-07-01)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

EN-FR, ES
Preview
IEC 60512-1-4:1997

Edition 1.0 (1997-07-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

EN-FR, ES
No preview
IEC 60512-1-4:1997/COR1:2000

Edition 1.0 (2000-11-15)

Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

EN-FR
Preview
IEC 60512-1-100:2012

Edition 3.0 (2012-02-22)

Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

EN-FR, ES
Preview
IEC 60512-1-101:2015

Edition 1.0 (2015-05-05)

Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification

EN-FR
Preview
IEC 60512-2-1:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

EN-FR, ES
Preview
IEC 60512-2-2:2003

Edition 1.0 (2003-05-16)

Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

EN-FR, ES
Preview
IEC 60512-2-3:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

EN-FR, ES
Preview
IEC 60512-2-5:2003

Edition 1.0 (2003-05-16)

Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

EN-FR, ES
Preview
IEC 60512-2-6:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

EN-FR, ES
Preview
IEC 60512-3-1:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

EN-FR, ES
Preview
IEC 60512-4-1:2003

Edition 1.0 (2003-05-16)

Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

EN-FR, ES
Preview
IEC 60512-4-2:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

EN-FR, ES
Preview
IEC 60512-4-3:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

EN-FR, ES
Preview
IEC 60512-5-1:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

EN-FR, ES
Preview
IEC 60512-5-2:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

EN-FR, ES
Preview
IEC 60512-6-1:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

EN-FR, ES
Preview
IEC 60512-6-2:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

EN-FR, ES
Preview
IEC 60512-6-3:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

EN-FR, ES
Preview
IEC 60512-6-4:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

EN-FR, ES
Preview
IEC 60512-6-5:1997

Edition 1.0 (1997-10-01)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

EN-FR, ES
Preview
IEC 60512-7-1:2010

Edition 1.0 (2010-03-17)

Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

EN-FR
Preview
IEC 60512-7-2:2011

Edition 1.0 (2011-11-17)

Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

EN-FR
Preview
IEC 60512-8-1:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

EN-FR
Preview
IEC 60512-8-2:2011

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

EN-FR
Preview
IEC 60512-8-3:2018

Edition 2.0 (2018-01-12)

Connectors for electrical and electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

EN-FR
Preview
IEC 60512-9-1:2010

Edition 1.0 (2010-03-17)

Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

EN-FR
Preview
IEC 60512-9-2:2011

Edition 1.0 (2011-11-28)

Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

EN-FR
Preview
IEC 60512-9-3:2011

Edition 2.0 (2011-06-22)

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

EN-FR
Preview
IEC 60512-9-4:2011

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

EN-FR
Preview
IEC 60512-9-5:2020

Edition 2.0 (2020-06-09)

Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

EN-FR
Preview
IEC 60512-9-5:2020 RLV

Edition 2.0 (2020-06-09)

Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

EN
Preview
IEC 60512-10-4:2003

Edition 2.0 (2003-08-11)

Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

EN-FR, ES
Preview
IEC 60512-11-1:2019

Edition 2.0 (2019-05-16)

Connectors for electrical and electronic equipment - Tests and measurements - Part 11-1: Climatic tests - Test 11a - Climatic sequence

EN-FR
Preview
IEC 60512-11-2:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

EN-FR, ES
Preview
IEC 60512-11-3:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

EN-FR, ES
Preview
IEC 60512-11-4:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

EN-FR, ES
Preview
IEC 60512-11-5:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

EN-FR, ES
Preview
IEC 60512-11-6:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

EN-FR, ES
Preview
IEC 60512-11-7:2003

Edition 2.0 (2003-05-22)

Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

EN-FR, ES
Preview
IEC 60512-11-8:1995

Edition 1.0 (1995-11-16)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

EN-FR, ES
Preview
IEC 60512-11-9:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

EN-FR, ES
Preview
IEC 60512-11-10:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

EN-FR, ES
Preview
IEC 60512-11-11:2002

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

EN-FR, ES
Preview
IEC 60512-11-12:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

EN-FR, ES
Preview
IEC 60512-11-13:2002

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

EN-FR, ES
Preview
IEC 60512-11-14:2003

Edition 2.0 (2003-07-24)

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

EN-FR, EN, ES
Preview
IEC 60512-12-1:2006

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

EN-FR, ES
Preview
IEC 60512-12-2:2006

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

EN-FR, ES
Preview
IEC 60512-12-3:2006

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

EN-FR, ES
Preview
IEC 60512-12-4:2006

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

EN-FR, ES
Preview
IEC 60512-12-5:2006

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

EN-FR, ES
Preview
IEC 60512-12-6:1996

Edition 1.0 (1996-01-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

EN-FR, ES
Preview
IEC 60512-12-7:2001

Edition 1.0 (2001-01-24)

Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

EN-FR, ES
Preview
IEC 60512-13-1:2006

Edition 2.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

EN-FR, ES
Preview
IEC 60512-13-2:2006

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

EN-FR, ES
Preview
IEC 60512-13-5:2006

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

EN-FR, ES
Preview
IEC 60512-14-2:2006

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

EN-FR, ES
Preview
IEC 60512-14-4:2006

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

EN-FR, ES
Preview
IEC 60512-14-5:2006

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

EN-FR, ES
Preview
IEC 60512-14-6:2006

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

EN-FR, ES
Preview
IEC 60512-14-7:1997

Edition 1.0 (1997-10-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

EN-FR, ES
Preview
IEC 60512-15-1:2008

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

EN-FR
Preview
IEC 60512-15-2:2018

Edition 2.0 (2018-01-12)

Connectors for electrical and electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

EN-FR
Preview
IEC 60512-15-3:2008

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

EN-FR
Preview
IEC 60512-15-4:2008

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

EN-FR
Preview
IEC 60512-15-5:2008

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

EN-FR
Preview
IEC 60512-15-6:2008

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

EN-FR
Preview
IEC 60512-15-7:2008

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

EN-FR
Preview
IEC 60512-15-8:1995

Edition 1.0 (1995-11-16)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

EN-FR, ES
Preview
IEC 60512-16-1:2008

Edition 1.0 (2008-06-11)

Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

EN-FR
Preview
IEC 60512-16-2:2008

Edition 1.0 (2008-06-11)

Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

EN-FR
Preview
IEC 60512-16-3:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

EN-FR
Preview
IEC 60512-16-4:2008

Edition 1.0 (2008-06-11)

Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

EN-FR
Preview
IEC 60512-16-5:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

EN-FR
Preview
IEC 60512-16-6:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

EN-FR
Preview
IEC 60512-16-7:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

EN-FR
Preview
IEC 60512-16-8:2008

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

EN-FR
Preview
IEC 60512-16-9:2008

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

EN-FR
Preview
IEC 60512-16-11:2008

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

EN-FR
Preview
IEC 60512-16-13:2008

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

EN-FR
Preview
IEC 60512-16-14:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

EN-FR
Preview
IEC 60512-16-16:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

EN-FR
Preview
IEC 60512-16-17:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

EN-FR
Preview
IEC 60512-16-18:2008

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

EN-FR
Preview
IEC 60512-16-20:1996

Edition 1.0 (1996-07-31)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

EN-FR, ES
Preview
IEC 60512-16-21:2012

Edition 1.0 (2012-05-07)

Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

EN-FR
Preview
IEC 60512-17-1:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

EN-FR
Preview
IEC 60512-17-2:2011

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

EN-FR
Preview
IEC 60512-17-3:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

EN-FR
Preview
IEC 60512-17-4:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

EN-FR
Preview
IEC 60512-19-1:2010

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

EN-FR
Preview
IEC 60512-19-3:1997

Edition 1.0 (1997-07-01)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

EN-FR, ES
Preview
IEC 60512-20-1:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

EN-FR
Preview
IEC 60512-20-2:2000

Edition 1.0 (2000-04-13)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

EN-FR, ES
Preview
IEC 60512-20-3:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

EN-FR
Preview
IEC 60512-21-1:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance

EN-FR
Preview
IEC 60512-22-1:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

EN-FR
Preview
IEC 60512-23-2:2010

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

EN-FR
Preview
IEC 60512-23-3:2018

Edition 2.0 (2018-12-14)

Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

EN-FR
Preview
IEC 60512-23-3:2018 RLV

Edition 2.0 (2018-12-14)

Connectors for electrical and electronic equipment - Tests and measurements - Part 23-3: Screening and filtering tests - Test 23c: Shielding effectiveness of connectors and accessories - Line injection method

EN
Preview
IEC 60512-23-4:2001

Edition 1.0 (2001-06-19)

Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

EN-FR, ES
Preview
IEC 60512-23-7:2005

Edition 1.0 (2005-01-27)

Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

EN-FR, ES
Preview
IEC 60512-24-1:2010

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

EN-FR
Preview
IEC 60512-25-1:2001

Edition 1.0 (2001-07-26)

Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

EN-FR, ES
Preview
IEC 60512-25-2:2002

Edition 1.0 (2002-03-12)

Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

EN-FR, ES
Preview
IEC 60512-25-3:2001

Edition 1.0 (2001-07-26)

Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation

EN-FR, ES
Preview
IEC 60512-25-4:2001

Edition 1.0 (2001-07-26)

Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

EN-FR, ES
Preview
IEC 60512-25-5:2004

Edition 1.0 (2004-07-15)

Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

EN-FR, ES
Preview
IEC 60512-25-6:2004

Edition 1.0 (2004-05-26)

Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

EN-FR, ES
Preview
IEC 60512-25-7:2004

Edition 1.0 (2004-12-15)

Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

EN-FR, ES
Preview
IEC 60512-25-9:2008

Edition 1.0 (2008-08-28)

Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

EN-FR
Preview
IEC 60512-26-100:2008+AMD1:2011 CSV

Edition 1.1 (2011-05-25)

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR
Preview
IEC 60512-26-100:2008

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR
No preview
IEC 60512-26-100:2008/AMD1:2011

Edition 1.0 (2011-03-14)

Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

EN-FR
Preview
IEC 60512-27-100:2011

Edition 1.0 (2011-12-07)

Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g

EN-FR
Preview
IEC PAS 60512-27-200:2018

Edition 1.0 (2018-10-19)

Connecteurs for electrical and electronic equipment - Tests and measurements - Part 27-200: Additional specifications for signal integrity tests up to 2 000 MHz on IEC 60603-7 series connectors - Tests 27a to 27g

EN
Preview
IEC 60512-28-100:2019

Edition 2.0 (2019-11-15)

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

EN-FR
Preview
IEC 60512-28-100:2019 RLV

Edition 2.0 (2019-11-15)

Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g

EN
Preview
IEC 60512-29-100:2015

Edition 1.0 (2015-03-05)

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g

EN-FR
Preview
IEC 60512-99-001:2012

Edition 1.0 (2012-08-13)

Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

EN-FR
Preview
IEC 60512-99-002:2019

Edition 1.0 (2019-03-08)

Connectors for electrical and electronic equipment - Tests and measurements - Part 99-002: Endurance test schedules - Test 99b: Test schedule for unmating under electrical load

EN-FR
No preview
IEC 60603-1:1991+AMD1:1992 CSV

Edition 2.1 (1991-06-28)

ES
Preview
IEC 60603-1:1991

Edition 2.0 (1991-06-28)

Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

EN-FR
No preview
IEC 60603-1:1991/AMD1:1992

Edition 2.0 (1992-06-15)

Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

EN-FR
Preview
IEC 60603-2:1995

Edition 3.0 (1995-09-22)

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

EN-FR
No preview
IEC 60603-2:1995/AMD1:2000

Edition 3.0 (2000-08-18)

Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

EN-FR
Preview
IEC 60603-3:1987

Edition 1.0 (1987-01-01)

Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing

EN-FR, ES, RU
Preview
IEC 60603-4:1987

Edition 1.0 (1987-03-15)

Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing

EN-FR, ES, RU
Preview
IEC 60603-5:1987

Edition 1.0 (1987-01-01)

Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing

EN-FR, ES, RU
Preview
IEC 60603-6:1987

Edition 1.0 (1987-01-01)

Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness

EN-FR, ES, RU
Preview
IEC 60603-7:2020

Edition 4.0 (2020-10-09)

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

EN-FR
Preview
IEC 60603-7:2020 RLV

Edition 4.0 (2020-10-09)

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

EN
Preview
IEC 60603-7-1:2011

Edition 3.0 (2011-04-07)

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

EN-FR
Preview
IEC 60603-7-2:2010

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

EN-FR
Preview
IEC 60603-7-3:2010

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

EN-FR
Preview
IEC 60603-7-4:2010

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

EN-FR
Preview
IEC 60603-7-5:2010

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

EN-FR
Preview
IEC 60603-7-7:2010

Edition 3.0 (2010-05-31)

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

EN-FR
Preview
IEC 60603-7-41:2010

Edition 1.0 (2010-03-10)

Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

EN-FR
Preview
IEC 60603-7-51:2010

Edition 1.0 (2010-03-10)

Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

EN-FR
Preview
IEC 60603-7-71:2010

Edition 1.0 (2010-06-28)

Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

EN-FR
Preview
IEC 60603-7-81:2015

Edition 1.0 (2015-12-16)

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN-FR
No preview
IEC 60603-7-81:2015/COR1:2017

Edition 1.0 (2017-06-30)

Corrigendum 1 - Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz

EN-FR
Preview
IEC 60603-7-82:2016

Edition 1.0 (2016-08-25)

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, 12 contacts, shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 MHz

EN-FR
Preview
IEC 60603-8:1991

Edition 1.0 (1991-01-20)

Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm

EN-FR, ES
Preview
IEC 60603-11:1992

Edition 1.0 (1992-03-15)

Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

EN-FR
Preview
IEC 60603-12:1992

Edition 1.0 (1992-06-25)

Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

EN-FR
Preview
IEC 60603-13:1995

Edition 1.0 (1995-01-25)

Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)

EN-FR
Preview
IEC 60603-14:1998

Edition 1.0 (1998-02-26)

Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment

EN-FR
Preview
IEC 60807-1:1991

Edition 2.0 (1991-10-15)

Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality

EN-FR
Preview
IEC 60807-2:1992

Edition 2.0 (1992-11-13)

Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

EN-FR
No preview
IEC 60807-2:1992/AMD1:1996

Edition 2.0 (1996-01-30)

Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

EN-FR
Preview
IEC 60807-3:1990

Edition 1.0 (1990-07-18)

Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction

EN-FR, RU
Preview
IEC 60807-6:1988

Edition 1.0 (1988-05-15)

Rectangular connectors for frequencies below 3 MHz - Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types

EN-FR, RU
Preview
IEC 60807-7:1991

Edition 1.0 (1991-12-20)

Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality

EN-FR
Preview
IEC 60807-8:1992

Edition 1.0 (1992-01-31)

Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen

EN-FR
Preview
IEC 60807-9:1993

Edition 1.0 (1993-04-20)

Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors

EN-FR
Preview
IEC 61076-1:2006+AMD1:2019 CSV

Edition 2.1 (2019-01-11)

Connectors for electronic equipment - Product requirements - Part 1: Generic specification

EN-FR
Preview
IEC 61076-1:2006

Edition 2.0 (2006-04-27)

Connectors for electronic equipment - Product requirements - Part 1: Generic specification

EN-FR
No preview
IEC 61076-1:2006/AMD1:2019

Edition 2.0 (2019-01-11)

Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification

EN-FR
Preview
IEC 61076-2:2011

Edition 2.0 (2011-06-21)

Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors

EN-FR
Preview
IEC 61076-2-001:2011

Edition 2.0 (2011-06-21)

Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

EN-FR
Preview
IEC PAS 61076-2-010:2020

Edition 1.0 (2020-07-15)

Connectors for electrical and electronic equipment - Product requirements - Part 2-010: Circular connectors - Detail specification for push-pull connectors with locking mechanism, based on mating interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113

EN
Preview
IEC 61076-2-012:2020

Edition 1.0 (2020-07-27)

Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector interfaces according to IEC 61076-2-101, IEC 61076-2-109, IEC 61076-2-111 and IEC 61076-2-113

EN-FR
Preview
IEC 61076-2-101:2012

Edition 3.0 (2012-04-20)

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

EN-FR
Preview
IEC 61076-2-102:2002

Edition 1.0 (2002-06-05)

Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply

EN-FR, ES
Preview
IEC 61076-2-103:2004

Edition 1.0 (2004-03-08)

Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')

EN-FR
Preview
IEC 61076-2-104:2014

Edition 2.0 (2014-09-09)

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking

EN-FR
Preview
IEC 61076-2-105:2008

Edition 1.0 (2008-07-25)

Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

EN-FR
Preview
IEC 61076-2-106:2011

Edition 1.0 (2011-06-21)

Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

EN-FR
Preview
IEC 61076-2-107:2010

Edition 1.0 (2010-04-29)

Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking

EN-FR
Preview
IEC 61076-2-109:2014

Edition 1.0 (2014-05-08)

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz

EN-FR
Preview
IEC PAS 61076-2-110:2010

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s

EN
Preview
IEC 61076-2-111:2017

Edition 1.0 (2017-12-07)

Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking

EN-FR, EN
Preview
IEC 61076-2-113:2017

Edition 1.0 (2017-02-21)

Connectors for electronic equipment - Product requirements - Part 2-113: Circular connectors - Detail specification for connectors with M12 screw locking with power and signal contacts for data transmission with frequency up to 100 MHz

EN-FR
Preview
IEC 61076-2-114:2020

Edition 1.0 (2020-09-24)

Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw- locking with power contacts and signal contacts for data transmission up to 100 MHz

EN-FR
Preview
IEC 61076-3:2008

Edition 2.0 (2008-07-09)

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification

EN-FR
Preview
IEC 61076-3-001:2008

Edition 2.0 (2008-07-09)

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification

EN-FR
Preview
IEC 61076-3-100:1999

Edition 1.0 (1999-11-16)

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row

EN-FR
Preview
IEC 61076-3-101:1997

Edition 1.0 (1997-09-05)

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line

EN-FR, ES
No preview
IEC 61076-3-101:1997/COR1:2010

Edition 1.0 (2010-04-21)

Corrigendum 1 - Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line

EN-FR
Preview
IEC 61076-3-103:2003

Edition 1.0 (2003-11-28)

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

EN-FR, EN
Preview
IEC 61076-3-104:2017

Edition 3.0 (2017-05-22)

Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz

EN-FR, EN
Preview
IEC 61076-3-106:2006

Edition 1.0 (2006-09-12)

Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

EN-FR
Preview
IEC 61076-3-110:2016

Edition 3.0 (2016-08-30)

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz

EN-FR
Preview
IEC 61076-3-112:2006

Edition 1.0 (2006-04-27)

Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment

EN-FR
Preview
IEC 61076-3-114:2009

Edition 1.0 (2009-04-29)

Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type

EN-FR
Preview
IEC 61076-3-115:2009

Edition 1.0 (2009-06-17)

Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type

EN-FR
Preview
IEC 61076-3-116:2008

Edition 1.0 (2008-09-09)

Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever

EN-FR
Preview
IEC 61076-3-117:2009

Edition 1.0 (2009-04-29)

Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling

EN-FR
Preview
IEC 61076-3-118:2010

Edition 1.0 (2010-04-26)

Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling

EN-FR
Preview
IEC 61076-3-119:2017

Edition 1.0 (2017-12-08)

Connectors for electrical and electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for shielded and unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments for data transmission with frequencies up to 100 MHz

EN-FR, EN
Preview
IEC 61076-3-120:2016

Edition 1.0 (2016-08-25)

Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A

EN-FR
Preview
IEC 61076-3-122:2017

Edition 1.0 (2017-05-22)

Connectors for electrical and electronic equipment - Product requirements - Part 3-122: Detail specification for 8-way, shielded, free and fixed connectors for I/O and Gigabit Ethernet applications in harsh environments

EN-FR, EN
Preview
IEC 61076-3-123:2019

Edition 1.0 (2019-09-13)

Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power supply and fibre optic data transmission, with push-pull locking

EN-FR
Preview
IEC 61076-3-124:2019

Edition 1.0 (2019-03-11)

Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz

EN-FR
No preview
IEC 61076-3-124:2019/COR1:2020

Edition 1.0 (2020-03-31)

Corrigendum 1 - Connectors for electrical and electronic equipment - Product requirements - Part 3-124: Rectangular connectors - Detail specification for 10-way, shielded, free and fixed connectors for I/O and data transmission with frequencies up to 500 MHz

EN-FR
Preview
IEC PAS 61076-3-126:2018

Edition 1.0 (2018-01-09)

Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5 pole power connector for industrial environments with push-pull locking

EN
Preview
IEC 61076-4:1995

Edition 1.0 (1995-09-22)

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors

EN-FR, ES
Preview
IEC 61076-4-001:1996

Edition 1.0 (1996-08-19)

Connectors with assessed quality, for use in d.c., low-frequencyanalogue and in digital high-speed data applications - Part 4:Printed board connectors - Section 001: Blank detail specification

EN-FR, ES
Preview
IEC 61076-4-100:2001

Edition 2.0 (2001-10-18)

Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes

EN-FR
Preview
IEC 61076-4-101:2001

Edition 2.0 (2001-09-18)

Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

EN-FR
No preview
IEC 61076-4-101:2001/COR1:2003

Edition 2.0 (2003-11-04)

Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

EN-FR
Preview
IEC 61076-4-102:1997

Edition 1.0 (1997-04-23)

Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917

EN-FR
Preview
IEC 61076-4-103:1999

Edition 1.0 (1999-02-26)

Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm

EN-FR
Preview
IEC 61076-4-104:1999

Edition 1.0 (1999-03-19)

Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm

EN-FR
Preview
IEC 61076-4-105:1995

Edition 1.0 (1995-06-19)

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .

EN-FR
Preview
IEC 61076-4-107:2001

Edition 1.0 (2001-08-22)

Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations

EN-FR
Preview
IEC 61076-4-108:2002

Edition 1.0 (2002-02-14)

Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1

EN
Preview
IEC 61076-4-110:2001

Edition 1.0 (2001-12-07)

Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function

EN-FR
Preview
IEC 61076-4-113:2002

Edition 1.0 (2002-11-15)

Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

EN-FR, EN
Preview
IEC 61076-4-115:2003

Edition 1.0 (2003-02-26)

Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

EN-FR
Preview
IEC 61076-4-116:2012+AMD1:2015 CSV

Edition 1.1 (2015-11-23)

Connectors for electronic equipment - Product requirements - Part4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

EN-FR
Preview
IEC 61076-4-116:2012

Edition 1.0 (2012-04-19)

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

EN-FR
No preview
IEC 61076-4-116:2012/AMD1:2015

Edition 1.0 (2015-11-23)

Amendment 1 - Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

EN-FR
Preview
IEC 61076-7:2000

Edition 1.0 (2000-06-16)

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation

EN-FR, EN, ES
Preview
IEC 61076-7-001:2004

Edition 1.0 (2004-07-15)

Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification

EN-FR
Preview
IEC 61076-7-100:2006

Edition 1.0 (2006-05-23)

Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system

EN-FR
Preview
IEC 61076-8-100:2020

Edition 1.0 (2020-04-09)

Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 20 A

EN-FR
Preview
IEC 61076-8-101:2020

Edition 1.0 (2020-04-09)

Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A

EN-FR
Preview
IEC 61076-8-102:2020

Edition 1.0 (2020-04-16)

Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 150 A

EN-FR
Preview
IEC 61984:2008

Edition 2.0 (2008-10-08)

Connectors - Safety requirements and tests

EN-FR
No preview
IEC 61984:2008/COR1:2011

Edition 2.0 (2011-10-18)

Corrigendum 1 - Connectors - Safety requirements and tests

EN-FR
Preview
IEC 62197-1:2006

Edition 1.0 (2006-04-27)

Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

EN-FR
Preview
IEC TR 62652:2010

Edition 1.0 (2010-03-30)

Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications

EN
Preview
IEC 62946-01:2018

Edition 1.0 (2018-05-24)

Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A

EN
No preview
IEC 62946-01:2018/COR1:2020

Edition 1.0 (2020-03-25)

Corrigendum 1 - Connectors for electrical and electronic equipment - Part 01: Rectangular connectors - Detail specification for 8-way, shielded, free and fixed high density connectors for data transmission with frequencies up to 100 MHz and with current carring capacity up to 1A

EN
Preview
IEC 62946-02:2017

Edition 1.0 (2017-01-20)

Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity up to 1 A

EN
No preview
IEC 62946-02:2017/COR1:2020

Edition 1.0 (2020-03-25)

Corrigendum 1 - Connectors for electronic equipment - Part 02: Detail specification for 8-way, unshielded, free and fixed high density connectors for data transmission up to 250 MHz and with current carrying capacity up to 1 A

EN
Preview
IEC 63171-1:2020

Edition 1.0 (2020-04-14)

Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and additional requirements for Type 1 copper LC style

EN-FR
Preview
IEC 63171-6:2020

Edition 1.0 (2020-01-20)

Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequencies up to 600 MHz.

EN-FR