TC 46

Edition 1.0 (1965-01-01)

High-voltage connecting wire with flame retarding insulation for use in television receivers

Edition 1.0 (1967-01-01)

Connecting wires having a rated voltage of 20 kV and 25 kV d.c. anda maximum working temperature of 105 °C for use in televisionreceivers

Edition 3.0 (2019-02-08)

Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods

Edition 3.0 (2019-02-08)

Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods

Edition 3.0 (2008-10-22)

Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies

Edition 2.0 (2003-07-31)

Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies

Edition 3.0 (2009-01-12)

Radio-frequency and coaxial cables assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies - Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors

Edition 4.0 (2016-05-18)

Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors

Edition 4.0 (2016-10-26)

Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors

Edition 4.0 (2016-10-26)

Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors

Edition 1.0 (2015-09-08)

Radio frequency and coaxial cable asemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors

Edition 3.0 (2008-10-21)

Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies

Edition 3.0 (2009-01-12)

Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies

Edition 2.0 (2003-08-11)

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

Edition 2.0 (2003-08-08)

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies

Edition 2.0 (2003-08-07)

Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies

Edition 3.0 (2015-09-08)

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

Edition 5.0 (2019-09-26)

Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801-1 and related standards

Edition 1.0 (2019-09-13)

Specification for the testing of balanced and coaxial information technology cabling - Part 1-1: Additional requirements for the measurement of transverse conversion loss and equal level transverse conversion transfer loss

Edition 1.0 (2018-12-14)

Specification for the testing of balanced and coaxial information technology cabling - Part 1-2: Installed balanced cabling as specified in ISO/IEC 11801 - Additional requirements for measurement of resistance unbalance with field test instrumentation

Edition 3.0 (2010-07-12)

Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards

Edition 1.0 (2008-05-21)

Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-20: Patch cords and work area cords - Blank detail specification for class D applications

Edition 1.0 (2015-07-24)

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7 - Blank detail specification

Edition 1.0 (2015-07-24)

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7_A - Blank detail specification

Edition 1.0 (2015-04-29)

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-25: Work area cord with M12 4 poles connectors - Blank detail specification

Edition 1.0 (2008-03-10)

Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards

Edition 1.0 (2012-05-29)

Passive RF and microwave devices, intermodulation level measurement - Part 1: General requirements and measuring methods

Edition 1.0 (2012-11-07)

Passive RF and microwave devices, intermodulation level measurement - Part 2: Measurement of passive intermodulation in coaxial cable assemblies

Edition 1.0 (2012-07-24)

Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors

Edition 1.0 (2012-07-24)

Passive RF and microwave devices, intermodulation level measurement - Part 4: Measurement of passive intermodulation in coaxial cables

Edition 1.0 (2013-01-16)

Passive RF and microwave devices, intermodulation level measurement - Part 5: Measurement of passive intermodulation in filters

Edition 1.0 (2013-01-16)

Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas

Edition 2.0 (2009-12-14)

Transmission properties of cascaded two-ports or quadripols - Background of terms and definitions

Edition 1.0 (2007-11-14)

Metallic communication cable test methods - Part 4-0: Electromagnetic compatibility (EMC) - Relationship between surface transfer impedance and screening attenuation, recommended limits

Edition 1.1 (2020-05-07)

Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements

Edition 1.0 (2014-01-22)

Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic screening measurements

Edition 1.0 (2020-05-07)

Amendment 1 - Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements

Edition 1.0 (2003-10-27)

Metallic communication cable test methods - Part 4-2: Electromagnetic compatibility (EMC) - Screening and coupling attenuation - Injection clamp method

Edition 2.0 (2013-10-22)

Metallic communication cable test methods - Part 4-3: Electromagnetic compatibility (EMC) - Surface transfer impedance - Triaxial method

Edition 2.0 (2015-04-29)

Metallic communication cable test methods - Part 4-4: Electromagnetic compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method

Edition 1.0 (2006-03-20)

Metallic communication cables test methods - Part 4-5: Electromagnetic compatibility (EMC) - Coupling or screening attenuation - Absorbing clamp method

Edition 2.0 (2017-08-25)

Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method

Edition 2.0 (2017-08-25)

Metallic cables and other passive components test methods - Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method

Edition 2.1 (2018-05-09)

Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method

Edition 2.0 (2015-12-09)

Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method

Edition 2.0 (2016-04-28)

Corrigendum 1 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method

Edition 2.0 (2018-05-09)

Amendment 1 - Metallic communication cable test methods - Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance Z_T and screening attenuation a_S or coupling attenuation a_C of connectors and assemblies up to and above 3 GHz - Triaxial tube in tube method

Edition 2.0 (2018-06-25)

Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance

Edition 2.0 (2018-06-25)

Metallic cables and other passive components - Test methods - Part 4-8: Electromagnetic compatibility (EMC) - Capacitive coupling admittance

Edition 2.1 (2020-07-06)

Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method

Edition 2.0 (2018-05-29)

Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method

Edition 2.0 (2018-05-29)

Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method

Edition 2.0 (2020-07-06)

Amendment 1 - Metallic communication cable test methods - Part 4 - 9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method

Edition 2.1 (2020-07-24)

Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method

Edition 2.0 (2015-11-04)

Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method

Edition 2.0 (2020-07-24)

Amendment 1 - Metallic communication cable test methods - Part 4-10: Electromagnetic compatibility (EMC) - Transfer impedance and screening attenuation of feed-throughs and electromagnetic gaskets - Double coaxial test method

Edition 1.0 (2009-08-07)

Metallic communication cable test methods - Part 4-11: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of patch cords, coaxial cable assemblies, pre-connectorized cables - Absorbing clamp method

Edition 1.0 (2009-08-06)

Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method

Edition 1.0 (2009-08-06)

Metallic communication cable test methods - Part 4-13: Electromagnetic compatibility (EMC) - Coupling attenuation of links and channels (laboratory conditions) - Absorbing clamp method

Edition 1.0 (2012-05-15)

Metallic communication cable test methods - Part 4-14: Electromagnetic compatibility (EMC) - Coupling attenuation of cable assemblies (Field conditions) absorbing clamp method

Edition 1.0 (2015-12-04)

Metallic communication cable test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell

Edition 1.0 (2016-10-26)

Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up

Edition 1.0 (2018-08-15)

Metallic cables and other passive components - Test methods - Part 4-17: Electromagnetic compatibility (EMC) - Reduction Factor

Edition 1.0 (2014-11-06)

Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules

Edition 1.0 (2019-01-29)

Environmental declaration - Part 2: Optical/copper telecom accessories products specific rules