International Standards and Conformity Assessment for all electrical, electronic and related technologies

TC 106

Méthodes d'évaluation des champs électriques, magnétiques et électromagnétiques en relation avec l'exposition humaine

 

     Documents available in this area are supporting documents uploaded by the committee. The IEC is not liable for the content of these documents.

TC 106 Documents de Support

Edit
Delete
Title, description
Downloads
Created

Publication

reference

IEC/IEEE 63195-1 Reference functions mmw 30GHz 60GHz

The analytical function are to be used for the evaluation of the field reconstruction algorithm uncertainty, and the forward transformation and back transformation uncertainties; those functions satisfy Maxwell equations and verify laws of electromagnetic field propagation. The volume distribution of the E-field and H-field they represent shall be the target for the reconstructed field from the data samples at the probe(s) location. All the functions are normalized so that the reference PsP (...)

2019-12-17IEC/IEEE 63195-1

IEC/IEEE 62704-4 Support Documents

This folder contains supplemental files required for the code verification.

2018-10-18IEC/IEEE 62704-4

IEC/IEEE 62704-3 supplemental files

The CAD model is for use in the basic manufacture of the SAM phantom standard test fixture and of simulation software systems by groups having the necessary expertise and resources. Four *.IGES files of inner and outer surfaces for the left and right halves extracted from the CAD model of the SAM phantom are provided. The four file names are: 1) sam_lft_in_6_11.igs 2) sam_lft_out_6_11.igs 3) sam_rt_in_6_11.igs 4) sam_rt_out_6_11.igs

2017-06-06IEC/IEEE 62704-3:2017

IEC/IEEE 62704-2 standard human model of a bystander

This model is intended for computer simulations and evaluation of the Specific Absorption Rate (SAR) in the human body from wireless communication devices with vehicle mounted antennas according to IEC/IEEE 62704-2 standard. It represents a standard bystander model. The file format description and parameters relevant for simulations are provided in the Annex A of the IEC/IEEE 62704-2 standard.

2016-09-23IEC/IEEE 62704-2:2017

IEC/IEEE 62704-2 standard CAD model of a vehicle

This vehicle CAD model is intended for computer simulations and evaluation of the Specific Absorption Rate (SAR) in the human body from wireless communication devices with vehicle mounted antennas according to IEC/IEEE 62704-2 standard. This CAD model is provided in ACIS version 18 SAT file format as well as in an open OBJ file format.

2016-12-16IEC/IEEE 62704-2:2017

IEC/IEEE 62704-2 standard human model of a passenger

This model is intended for computer simulations and evaluation of the Specific Absorption Rate (SAR) in the human body from wireless communication devices with vehicle mounted antennas according to IEC/IEEE 62704-2 standard. It represents a standard passenger model. The file format description and parameters relevant for simulations are provided in the Annex A of the IEC/IEEE 62704-2 standard.

2016-09-23IEC/IEEE 62704-2:2017

IEC/IEEE 62704-1 supplemental files

This file contains CAD models and reference results for IEC/IEEE 62704-1.

2016-12-20IEC/IEEE 62704-1:2017

IEC TR 62669 Annexes

Test reports referenced in IEC TR 62669:2019 annexes providing examples of the implementation of IEC 62232:2017 for base station RF exposure assessement

2020-04-29IEC TR 62669:2019

IEC 62232 Normalised Antenna Pattern- Figure B.24

This file contains the normalised horizontal and vertical antenna pattern data for a generic radio base station antenna at 900MHz. It may be used to validate a synthetic model and ray tracing algorithms.

2017-08-21IEC 62232:2017 Ed.2

IEC 62232 Compliance error probabilities

This file contains example simulations to determine the compliance error probability. It calculates probability for the surveyor conducting the evaluation, as well as an audit evaluation; to determine whether the exposure level exceeds the allowable limit at the assessor's compliance boundary.

2017-08-21IEC 62232:2017

IEC 62209-3 Analytical functions for Annex H

The analytical function are to be used for the evaluation of the reconstruction algorithm uncertainty; those functions verify Maxwell equations. The volume distribution of the E-field they represent shall be the target for the reconstructed field from the data samples at the probe locations. All the functions are normalized so that the reference peak spatial-average 1g SAR equals 1 W/kg and the target peak spatial-average 10g SAR is given in Table H.1 of the IEC PAS 63151_ED1 and IEC CDV (...)

2018-12-16IEC 62209-3, IEC PAS 63151_ED1

CAD files for the SAM phantom

The CAD model is for use in the basic manufacture of the SAM phantom standard test fixture and of simulation software systems by groups having the necessary expertise and resources. Four *.IGES files of inner and outer surfaces for the left and right halves extracted from the CAD model of the SAM phantom are provided. The four file names are: 1) sam_lft_in_6_11.igs 2) sam_lft_out_6_11.igs 3) sam_rt_in_6_11.igs 4) sam_rt_out_6_11.igs

2017-09-03IEC 62209-1:2016; IEC 62209-3, IEC PAS 63151:2018, IEC/IEEE 62704 (all parts)