TC 94

All-or-nothing electrical relays – Tests and Measurements – Part 7-54: Critical DC load current test

All-or-nothing electrical relays – Tests and Measurements – Part 7-53: Slow decrease and increase of supply voltage

All-or-nothing electrical relays – Tests and Measurements – Part 7-52: Coil overvoltage

All-or-nothing electrical relays – Tests and Measurements – Part 7-51: Reset behavior at coil voltage drop

All-or-nothing electrical relays – Tests and Measurements – Part 7-50: Momentary drop in supply voltage

All-or-nothing electrical relays – Tests and Measurements – Part 7-49: Long term stability of sealing

All-or-nothing electrical relays – Tests and Measurements – Part 7-47: Making and breaking capacities

All-or-nothing electrical relays – Tests and Measurements – Part 7-48: Contact reliability test

All-or-nothing electrical relays – Tests and Measurements – Part 7-46: Surge withstand test

All-or-nothing electrical relays – Tests and Measurements – Part 7-45: Maximum cycling frequency

All-or-nothing electrical relays – Tests and Measurements – Part 7-44: Salt mist

All-or-nothing electrical relays – Tests and Measurements – Part 7-39: Tests: Insertion and withdrawal force (mating relay and socket)

All-or-nothing electrical relays – Tests and Measurements – Part 7-36: Fire hazard

All-or-nothing electrical relays – Tests and Measurements – Part 7-35: Resistance to cleaning solvents

All-or-nothing electrical relays – Tests and Measurements – Part 7-17: Shock, Vibration and Acceleration

All-or-nothing electrical relays – Tests and Measurements – Part 7-15: Robustness of Terminals

All-or-nothing electrical relays – Tests and Measurements – Part 7-8: Timing

All-or-nothing electrical relays – Tests and Measurements – Part 7-7: Functional Tests

All-or-nothing electrical relays – Tests and Measurements – Part 7-5: Insulation resistance

All-or-nothing electrical relays – Tests and Measurements – Part 7-2: Mechanical tests and weighing

Systematic review of IEC 60255-1-00 (1975)

Electrical relays. All-or-nothing electrical relays. *Note.-This publication supersedes IEC 255-1 (1967) and 255-2 (1969)

Systematic review of IEC 60255-7 (1991)

Electrical relays - Part 7: Test and measurement procedures for electromechanical all-or-nothing relays

Systematic review of IEC 60255-9 (1979)

Electrical relays. Part 9: Dry reed make contact units

Systematic review of IEC 255-10 (1979)

Electrical relays. Part 10: Application of the IEC Quality Assessment System for Electronic Components to all-or-nothing relays

Electrical relays. Part 14: Endurance tests for electrical relay contacts - Preferred values for contact loads

Systematic review of IEC 255-15 (1981)

Electrical relays. Part 15: Endurance tests for electrical relay contacts - Specification for the characteristics of test equipment

Electrical relays. Part 18: Dimensions for general purpose all-or-nothing relays

Electrical relays, Part 19: Sectional specification: Electromechanical all-or-nothing relays of assessed quality

Electrical relays. Part 19: Sectional specification: Electromechanical all-or-nothing relays of assessed quality

Updating of IEC 60255-19-1 Publication after issue 2 of IEC 60255-7 (1991)

Electrical relays. Part 19: Blank detail specification: Electromechanical all-or-nothing relays of assessed quality - Test schedules 1, 2 and 3

Electrical relays - Part 23: Contact performance

Electromechanical elementary relays - Part 1: General and safety requirements

Corrigendum 1 - Electromechanical elementary relays - Part 1: General and safety requirements

Corrigendum 2 - Electromechanical elementary relays - Part 1: General and safety requirements

Amendment 1 - Electromechanical elementary relays - Part 1: General and safety requirements

Electromechanical elementary relays - Part 1: General requirements

Corrigendum 1 - Electromechanical elementary relays - Part 1: General requirements

Electromechanical elementary relays - Part 1: General and safety requirements

Corrigendum 1 - Electromechanical elementary relays - Part 1: General and safety requirements

Electromechanical non-specified time all-or-nothing relays - Part 1: General requirements

Electromechanical elementary relays - Part 2: Reliability

Electromechanical elementary relays - Part 2: Reliability

Electromechanical elementary relays - Part 2: Reliability

Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B₁₀ values

Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B₁₀ values

Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B₁₀ values

Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts

Electromechanical elementary relays - Part 4: General and safety requirements for reed relays

Electromechanical non-specified time all-or-nothing relays - Part 5: Insulation coordination

Electromechanical non-specified time all-or-nothing relays - Part 5: Insulation coordination

Electromechanical elementary relays - Part 7: Test and measurement procedures

Electromechanical all-or-nothing relays - Part 7: Test and measurement procedures

Electromechanical elementary relays - Part 10: Additional functional aspects and safety requirements for high-capacity relays

Electromechanical telecom elementary relays of assessed quality - Part 1: Generic specification and blank detail specification

Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1: Generic specification

Electromechanical elementary relays of assessed quality - Part 10: Sectional specification - Relays for industrial application

Electromechanical elementary relays of assessed quality - Part 11: Blank detail specification - Relays for industrial application

Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality

Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality

Electromechanical all-or-nothing relays - Part 50: Sectional specification: Electromechanical all-or-nothing telecom relays of assessed quality

Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction

Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction

Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction

Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base

Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base

Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base

Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base

Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base

Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base

Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base

Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base

Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 mm x 7,5 mm base

Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base

Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base

Corrigendum 1 - Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base

Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 mm x 7,5 mm (max.) base

Time relays for industrial and residential use - Part 1: Requirements and tests

Time relays for industrial and residential use - Part 1: Requirements and tests

Specified time relays for industrial use - Part 1: Requirements and tests

Reed switches - Part 1: Generic specification

Reed switches - Part 1: Generic specification

Reed contact units - Part 1: Generic specification

Reed switches - Part 1-1: Generic specification - Blank detail specification

Reed switches - Part 1-1: Generic specification - Quality assessment

Reed contact units - Part 2: Heavy-duty reed switches

Reed contact units - Part 2-1: Heavy-duty reed switches - Quality assessment specification

IEC/PAS 62246-2-1: Reed contact units. Part 2-1: Heavy-duty reed switches - Quality assessment specification

Reed switches - Part 3: Reliability data for reed switch-devices in typical safety applications

Reed switches – Part 4: Systematic aspects for the application of reed switches in safety related parts of control systems

Solid-state relays

Solid-state relays