SC 46C

IEC 62807-3: HYBRID COMMUNICATION CABLES – Part 3: Outdoor hybrid cables – Sectional specification

IEC XXXXX: Resistance to fire performance of communication cables installed in buildings

EC 62783-1-1 ED1: Test Procedures for Twinax cables for digital communications - Part 1-1: Alternative, time-domain reflectometry based, test procedures

To collect information on the points of failure, continuity checking arrangements, test samples, test procedures and test reports relevant to communication cables in order to prepare a Technical Report on the resistance to fire of those cables

IEC 62783-1-2 Ed 1.0: Twinax cables for digital communications - Part 1-2: twinax impedance parameters in time domain

Amendment 1 to IEC 1156-2, 1156-3 and 1156-4 - 150 Ohm cables parameters

Sectional Specification for multicore and symmetrical pair/quad cables for digital communications - Specification for longitudinal balance (IEC 1156)

Sectional Specification for multicore and symmetrical pair/quad cables for digital communications - Transfer impedance measurement

Sectional Specification for multicore and symmetrical pair/quad for digital communications - Unbalance attenuation

Amendment to IEC 61156-1 to include a test method for a combined flame and smoke test for cables used for digital communications, and an amendment to IEC 61156-2 and 61156-2-1 to include requirements for the combined flame and smoke test for horizontal floor wiring

Communication cables - Part XX: Common design rules and construction - General

Communication cables - Part XX: Common desing rules and construction - PVC insulation compounds

Communication cables - Part XX: Common design rules and construction - PVC sheathing compounds

Communication cables - Part XX: Common design rules and construction - PE insulation

Communication cables - Part XX: Common design rules and construction - PE sheathing

Communication cables - Part XX: Common design rules and construction - Polypropylene insulation compounds

Communication cables - Part XX: Common design rules and construction - Halogen free flame retardant insulation compounds

Communication cables - Part XX: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds

Communication cables - Part XX: Common design rules and construction - Filling compounds for filled cables

Communication cables - Part XX: Common design rules and construction - Cross-linked PE insulation compounds

Communication cables - Part XX: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing

Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate - Digital Telecommunication) - Central Office and Switchboard cables

Multicore and symmetrical pair/quad cables for digitalcommunication - Part 1-x: Measuring the temperature behaviour of cables in bundles when fed with DC

IEC 61156-8: Symmetrical pair cables for digital and analog communications with transmission characteristics up to 1,6 GHz Part 8 : Sectional Specification

IEC 62xxx-1: Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate Digital Telecommunication) - Central Office and Switchboard cables - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communication - Part 1-x: Measuring the temperature behavior of cables in bundles when fed with DC

Hybrid telecommunication cables – Part 2: Indoor hybrid cables – Sectional specification

Hybrid telecommunication cables – Part 3: Outdoor hybrid cables – Sectional specification

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods

Amendment 3 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 1: General test and measuring methods

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations

Amendment 1 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations

Amendment 2 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 2: Cables in pairs, triples, quads and quintuples for inside installations

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples

Amendment 1 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 4: Distribution wires with solid conductors, PVC insulated, in pairs, triples, quads and quintuples

Amendment 1 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 4: Distribution wires with solid conductors, PVC insulated, in pairs, triples, quads and quintuples

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 5: Equipment wires and cables with solid or stranded conductors, PVC insulated, screened, single or one pair

Amendment 2 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 5: Equipment wires and cables with solid or stranded conductors, PVC insulated, screened, single or one pair

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 6: Signalling cables in singles for telecommunication equipment and installation

Amendment 1 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 6: Signalling cables in singles for telecommunication equipment and installation

Low-frequency cables and wires with PVC insulation and PVC sheath. Part 7: Distribution wires with solid conductors, PVC insulated, polyamide coated, in singles, pairs, triples, quads and quintuples

Amendment 1 - Low-frequency cables and wires with PVC insulation and PVC sheath. Part 7: Distribution wires with solid conductors, PVC insulated, polyamide coated, in singles, pairs, triples, quads and quintuples

Inclusion of requirements for 'cross-linked' pvc insulation, in IEC 189-7

Standard colours for insulation for low-frequency cables and wires

Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

Corrigendum 1 - Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide

Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires

Amendment 1 - Guide to the calculation of resistance of plain and coated copper conductors of low-frequency cables and wires

Dimensions of copper conductors in local cables

Calculation of maximum external diameter of cables for indoor installations

Calculation of maximum external diameter of cables for indoor installations

Low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single

Amendment 3 - Low-frequency miniature equipment wires with solid or stranded conductor, fluorinated polyhydrocarbon type insulation, single

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

Corrigendum 1 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

Sytematic review of IEC 708-1 (1981)

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 1: General design details and requirements

Amendment 3 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 1: General design details and requirements

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 2: Unit type, filled, moisture barrier polyethylene sheathed cables with copper conductors and solid or cellular insulation

Amendment 1 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 2: Unit type, filled, moisture barrier polyethylene sheathed cables with copper conductors and solid or cellular insulation

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 3: Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors and solid or cellular insulation

Amendment 1 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 3: Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors and solid or cellular insulation

Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 4: Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors, solid insulation and integral suspension strand

Amendment 1 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath. Part 4: Unit type, unfilled, moisture barrier polyethylene sheathed cables with copper conductors, solid insulation and integral suspension strand

Systematic review of IEC 60753 Ed.1 (1982)

Aluminium electrical conductor wires used in polyolefin insulated telecommunication cables

Systematic review of IEC 60762 Ed.1 (1993)

Aluminium alloy electrical conductor wires used in polyolefin insulated telecommunication cables

Amendment 1 - Aluminium alloy electrical conductor wires used in polyolefin insulated telecommunication cables

Calculation of maximum overall diameter of cables and specification of the minimum tensile strength of suspension strand for low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath

Copper alloy used for equipment wires

PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination

Amendment 1 - PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination

Systematic review of IEC 979 Ed. 2 (1989)

Wires for wire wrapping applications

150 ohm cable parameters (Amendment to Documents 46C(Sec.)196, 198, 200)

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification - Specification for test methods - Bending tests; tensile performance of the cable; cold bend performance

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Amendment 1 to IEC 1156-1 - Test procedure for determining characteritic impedance (Zo) and structural return loss (SRL)

Revision of IEC 1156 series - 1) To waive power-sum cross talk and ACR from cable specification - 2) to add EL FEXT requirement

Amendment 2 - Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Amendment to IEC 61156-1 - Sub-clause 2.1.5 & 3.3.1 - Velocity of propagation

Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification

Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables

Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 1-2: Electrical transmission characteristics and test methods of symmetrical pair/quad cables

Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables

Amendment 1- Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables

Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Assessment of conductor heating in bundled cables due to the deployment of remote powering

Multicore and symmetrical pair/quad cables for digital communications - Part 1-4: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Conductor heating of bundled data grade cables for limited power transmission based on IEEE 802.3

Multicore and symmetrical pair/quad cables for digital communications - Part 1-5: Correction procedures for the measurement results of return loss and input impedance

Multicore and symmetrical pair/quad cables for digital communications - Part 1-6: Nominal DC-resistance values of floor-wiring and work-area cables for digital communications

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications up to 100 MHz - Part 2: Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification

Amendment No. 1 to IEC 1156-2 - Test procedures for determining characteristic impedance (Zo) and structural return loss (SRL)

Amendment 2 - Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Sectional specification

Amendment to IEC 61156-2 - Sub-clause 3.3.1: Velocity of propagation

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications up to 100 MHz - Part 2-1: Horizontal floor wiring - Blank Detail Specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Horizontal floor wiring - Section 1: Blank detail specification

Part 2:Horizontal floor wiring. Section 1:Blank detail specification

Amendment 1 - Part 2:Horizontal floor wiring. Section 1:Blank detail specification

Amendment 2 - Part 2:Horizontal floor wiring. Section 1:Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification

Amendment to IEC 1156-1, -2, -2.1, -3, -3.1, -4, -4.1 to include far end crosstalk for multiple pair cable used for bi-directional traffic

Amendment 2 - Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Sectional specification

Amendment to IEC 61156-3 - Sub-clause 3.3.1: Velocity of propagation

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area wiring - Section 1: Blank detail specification

Part 3:Work area wiring. Section 1:Blank detail specification

Amendment 1 - Part 3:Work area wiring. Section 1:Blank detail specification

Amendment 2 - Part 3:Work area wiring. Section 1:Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring - Capability Approval - Sectional specification

Detail specification of cables for intelligent peripheral interface - (O.0887 mm2 and 0,1408 mm2)

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Revision of IEC 1156 series -1: To waive power-sum cross talk and ACR from cable specification - 2: To add EL FEXT requirement

Amendment 2 - Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

Amendment to IEC 61156-4 - Sub-clause 3.3.1: Velocity of propagation

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Section 1: Blank detail specification

Part 4:Riser cables. Section 1:Blank detail specification

Amendment 1 - Part 4:Riser cables. Section 1:Blank detail specification

Amendment 2 - Part 4:Riser cables. Section 1:Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification

Corrigendum 2 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Sectional specification

Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Horizontal floor wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Capability approval - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Sectional specification

Symmetrical pair/quad cables for digital communications with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Work area wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz - Working area wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Blank detail specification

Multicore and symmetrical pair/quad cables for digital communications - Part 6-2: Symmetrical pair/quad cables with transmission characteristics up to 600 MHz - Work area wiring - Capability approval - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Sectional specification for digital and analog communication cables

Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Blank detail specification for digital and analog communication cables

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Blank detail specification for digital and analog communication cables

Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Capability Approval - Sectional specification for digital and analog communication cables

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz - Quality assessment procedure - Sectional specification for digital and analog communication cables

Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification

Corrigendum 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1200 MHz - Work area wiring - Sectional specification

Amendment 1 - Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 9: Cables for channels with transmission characteristics up to 2 GHz - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 10: Cables for cords with transmission characteristics up to 2 GHz - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 11: Symmetrical single pair cables with transmission characteristics up to 600 MHz - Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 12: Symmetrical single pair cables with transmission characteristics up to 600 MHz - Work area wiring - Sectional specification

IEC 61156-13: MULTICORE AND SYMMETRICAL PAIR/QUAD CABLES FOR DIGITAL COMMUNICATIONS – Part 13: Symmetrical single pair cables with transmission characteristics up to 20 MHz – Horizontal floor wiring - Sectional specification

Multicore and symmetrical pair/quad cables for digital communications - Part 15: Symmetrical pair/quad cables for horizontal floor wiring with transmission characteristics up to 1 000 MHz and resistance to fire performance characteristics – Sectional specification

State of the art for symmetrical pair/quad cables with transmission characteristics beyond category 5

Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments - Part 1: Generic specification

Fire performance of communication cables installed in buildings

Fire performance of communication cables installed in buildings

Fire performance of communication cables installed in buildings

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification

Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables

Multicore and symmetrical pair/quad cables for broadband digital communications (High bit rate Digital access Telecommunication Network) - Outside plant cables - Part 1: Generic Specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2: Unfilled cables - Sectional specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 2-1: Unfilled cables - Blank detail specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3: Filled cables - Sectional specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 3-1: Filled cables - Blank detail specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Sectional specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4-1: Aerial drop cables - Blank detail specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5: Filled drop cables - Sectional specification

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 5-1: Filled drop cables - Blank detail specification

Twinax cables for digital communications - Part 1: Generic specification

Twinax cables for digital communications - Part 1: Generic specification

IEC 62783-1-1 ED1: Twinax cables for digital communications - Part 1-1 :Time domain test methods for Twinax cables for digital communications, General Requirements

Twinax cables for digital communications - Part 2: Family specification - Cable for Ethernet-over-twinax physical interfaces

Twinax cables for digital communications - Part 2: Family specification - Cable for Ethernet-over-twinax physical interfaces

Hybrid telecommunication cables - Part 1: Generic specification

Hybrid telecommunication cables – Part 3: Outdoor hybrid cables – Sectional specification

Hybrid Telecommunication Cables – Part 3-10: Family specification for FTTA hybrid communication cables