SC 65A

Amendment to IEC 61326-1, 1997: Test configurations and performance criterias for portable test and measurement equipment, powered by batteries or from the circuit being measured (e.g. Multimeters Loop Testers etc.) used at frequencies up to 20 kHz

IEC 61326-3-3: Principles for immunity testing of safety-related systems and equipment used therein against electromagnetic phenomena (TS)

Functional safety - Critical E/E/PE systems for defence industry applications

Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions

Operating conditions for industrial-process measurement and control equipment. Part 2: Power

Amendment 1 - Operating conditions for industrial-process measurement and control equipment. Part 2: Power

Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences

Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences

Systematic review of IEC 60801-1 (1984)

Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction

Systematic review of IEC 801-2 Ed. 2. (1991)

Electromagnetic compatibility for industrial-process measurement and control equipment - Part 2: Electrostatic discharge requirements

Electromagnetic compatibility for industrial-process measurement and control equipment - Part 3: Radiated electromagnetic field requirements

Systematic review of IEC 801-4 (1988)

Electromagnetic compatibility for industrial-process measurement and control equipment - Part 4: Electrical fast transient/burst requirements

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts

Systematic review of IEC 61069-1 (1991)

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 1: General considerations and methodology

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 4: Assessment of system performance

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 6: Assessment of system operability

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety

Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of other system properties

Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties

IEC 61326-F1- Annex F: Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

Electrical equipment for measurement, control and laboratory use - EMC requirements

Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Corrigendum 2 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Amendment 1

Amendment 2

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable testing, measuring and monitoring equipment used in low-voltage distribution systems

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and perofrmance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications

Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment

Interpretation sheet 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment

Electromagnetic compatibility (EMC) requirements for electrical equipment for measurement, control and laboratory use - Part 20: Particular requirements for equipment used in laboratories or test and measurement areas with a controlled electromagnetic environment

Electromagnetic compatibility (EMC) requirements for electrical equipment for measurement, control and laboratory use - Part 30: Particular requirements for portable test and measurement equipment that is powered by battery or from the circuit being measured

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508)

Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see www.iec.ch/61508)

Corrigendum 1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508)

Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/ programmable electronic safety-related systems

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see www.iec.ch/61508)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508)

Maintenance procedure on IEC 61508-3: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see www.iec.ch/61508)

Corrigendum 1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3-1: Software requirements - Reuse of pre-existing software elements to implement all or part of a safety function

Requirements and Guidance in the use of mathematical and logical techniques for establishing exact properties of software and its documentation

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part
3-3: Requirements for object-oriented software in safety-related systems

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see www.iec.ch/61508)

Corrigendum 1 - Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations

Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508)

Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels

Functional safety of electrical/electronic/programmable electronic safety related systems - Part 5: Examples of methods for the determination of safety integrity levels (see www.iec.ch/61508)

Corrigendum 1 - Functional safety of electrical/electronic/programmable electronic safety related systems - Part 5: Examples of methods for the determination of safety integrity levels

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508)

Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see www.iec.ch/61508)

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508)

Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see www.iec.ch/61508)

Functional safety - Safety instrumented systems for the process industry sector - Part 0: Functional safety for the process industry and IEC 61511

Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements

Corrigendum 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements

Amendment 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements

Amendment 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements

Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements

Corrigendum 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements

Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1:2016

Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1

Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels

Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels

Corrigendum 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels

Functional safety - Safety instrumented systems for the process industry sector - Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2

Batch control - Part 1: Models and terminology

Batch control - Part 2: Data structures and guidelines for languages

Batch control - Part 3: General and site recipe models and representation

Batch control - Part 3: General and site recipe models and representation

Batch control - Part 4: Batch production records

Batch control - Part 4: Batch production records

Management of alarms systems for the process industries

Management of alarm systems for the process industries

Human factors and functional safety

Functional safety - Framework for safety critical E/E/PE systems for defence industry applications

Human-Machine Interfaces for Process Automation Systems