International Standards and Conformity Assessment for all electrical, electronic and related technologies

News release – 2016 Number 31

Outstanding contributions of 8 technology leaders recognized

2016 Thomas A. Edison Awards for exceptional achievement


Geneva, Switzerland, 2016-10-27 – The IEC (International Electrotechnical Commission) has paid tribute to the dedication and work of eight leaders of the IEC family who, through their outstanding commitment and expertise, have contributed to making products and electrical systems safer, more energy efficient and more compatible.


World Standards Day 2016


At the IEC 80th General Meeting in Frankfurt, the following were recognized with the 2016 Thomas A. Edison Award:

  • Robert Arseneault, Secretary, TC 4
  • Giovanni Cassinelli, Secretary, SC 23E
  • Marie-Elisabeth d'Ornano, Chair, IECQ
  • Geoffrey S. Ibbott, Past Chair, SC 62C
  • Yoshiaki Ichikawa, Chair, TC 111
  • Maurice Montavon, Secretary, TC 5 H
  • Heribert Schorn, IEC Coordinator, ISO CASCO WGs
  • Bernd Sisolefsky, Past Chair, CISPR CIS/B

The Thomas A. Edison Award is in the spirit of Thomas Alva Edison, 1847-1931, one of the greatest inventors in history. Edison developed a system of electric power generation and distribution which was a major development in the modern industrialized world. His over 1,000 patents included improving the incandescent lamp, film projection and sound recording, which still have an impact on our daily lives. “Genius is 1 % inspiration and 99 % perspiration” is one of Edison’s most famous quotes.


Robert Arseneault, Secretary, TC 4, Canada

Robert Arseneault has been Secretary of IEC TC 4, Hydraulic turbines, since 1992, when Canada took over the responsibility of the Secretariat. He was particularly instrumental in the publication of dual logo standards like IEC/IEEE, where the coordination of editing, comments and planning are essential. Arseneault excels in fostering the exchange of ideas between people from different cultures. In the last five years, Arseneault worked closely with the Chair of TC 4 to launch two new working groups, MT 31 on Turbine residual life and WG 33 on pressure fluctuations. Arseneault is also constantly promoting the IEC through presentations at international conferences (recently at HydroVision) and through his contributions to articles about the work of IEC TC 4.


Giovanni Cassinelli, Secretary, SC 23E, Italy

Giovanni Cassinelli has served as Secretary of SC 23E, Circuit-breakers and similar equipment for household use, since January 2003. He strongly supports the TC Chair in smoothly solving conflicts and maintaining a cooperative environment. Cassinelli has helped ensure highest quality results in the development, editing and translation of SC 23E documents. His contributions led to 23 new publications, including new IEC International Standards and amendments of existing ones, and over 400 official SC documents. He played a crucial role in the successful implementation of a new Blocks and Modules approach in the structure of SC 23E Standards, aiming at harmonizing a family of standards, thus avoiding mistakes, inconsistencies or discrepancies.


Marie-Elisabeth d'Ornano, Chair, IECQ, France

IECQ Chair since 1 January 2014, Marie-Elisabeth d’Ornano has embraced her role, responsibilities and duties with enthusiasm and a dynamic hands-on approach. In this role, she has had the strong support of her employer, LCIE – a Bureau Veritas company. IECQ has been reinforced as an international “best practice” model for supplier assessment and as an extremely valuable Supply Chain Management tool for the many industries involved in the manufacture, supply and distribution of electrical/electronic components, parts and assemblies.

During her initial term as Chair, IECQ has benefited from d'Ornano’s leadership as illustrated in a number of key initiatives and achievements:

  • IECQ support and collaboration on the new CA Harmonized Basic Rules
  • Closer cooperation between IECQ and specialized industries, e.g. avionics
  • Development and rollout of the new IECQ Scheme for LED lighting
  • Establishment of collaboration between IECQ and other CA Systems, notably IECEE
  • Introduction of the new IECQ developed and run Training Programme, launched in 2015
  • The first IECQ International Conference on Supply Chain Management, in Paris in April 2016
  • Fostering international cooperation with other organizations, e.g. STACK International


Geoffrey S. Ibbott, Past Chair, SC 62C, United States

During his term as Chair of IEC SC 62C, Equipment for radiotherapy, nuclear medicine and radiation dosimetry, Geoffrey S. Ibbott outstandingly promoted the development and recognition of IEC Standards for medical radiation therapy equipment, nuclear medicine and radiation measurement. Ibbott successfully encouraged various experts and stakeholders from industry, medical physics and regulatory bodies to join the Committee. About 20 IEC publications have been issued under his leadership, and these have been widely accepted in the regulatory environments of EU, US, China, Japan and other jurisdictions. As a result, IEC is highly recognized as a home for standards in the field of medical equipment publications for radiation therapy, nuclear medicine and radiation measurement.


Yoshiaki Ichikawa, Chair, TC 11, Japan

Dr Yoshiaki (Yoshi) Ichikawa has led environmental standardization in TC 111 Environmental standardization for electrical and electronic products and systems for 11 years, since its establishment in 2004. He served as the Convenor of WG2 Environmentally Conscious Design (ECD) and published IEC 62430, Environmentally conscious design for electrical and electronic products. For this contribution he received the 1906 Award in 2007. In 2009, Ichikawa was appointed as the Chair of TC 111. TC 111 has published 18 deliverables to date, in the fields of chemical, eco-design, greenhouse gas and resource efficiency. Most of these have been integrated into legal frameworks specifying product environmental aspects around the world through which the electrotechnical industry has gained benefits. Ichikawa's activities also extend to other fields. He is an expert of IEC TC 62 Electrical equipment in medical practice, where he is supporting the Convenor of PT 62926, addressing the systems aspects of real-time radiation therapy.


Maurice Montavon, Secretary, TC 5, Switzerland

With his personal engagement during the last 44 years Maurice Montavon has devoted countless hours to IEC. In 1972, Montavon was designated as expert by the Swiss NC for the first time – to WG 1 of TC 5, Steam turbines. From 1982 to 1984 he was involved in the publication IEC60045-1. Montavon has been Chair of the Swiss Mirror Committee TC 5 for almost 30 years. In 2007 he was elected by SMB as Secretary of TC 5, succeeding in the reactivation of TC 5 in 2008. Today TC 5 has 4 MTs and 2 WGs, with more than 70 experts. In the area of cogeneration he has recently also achieved a collaboration with ISO following the advice given by SMB. During his career Montavon always promoted international standardization within IEC and used his network to bring new experts into TCs, not only from Switzerland but also from other countries where he worked. Montavon founded the Swiss Mirror Committee of TC 117 Solar thermal electric plants, as Chair in 2011 and he acts as liaison officer between TC 5, TC 117 and TC 120.


Heribert Schorn, IEC Coordinator, ISO CASCO WGs, Germany

Heribert Schorn has been recognized for exceptional current and long-term achievement in representing the IEC CAB in ISO/CASCO Working Groups, for the development of conformity assessment standards, specifically the ISO/IEC 17000 series. This series of dual logo ISO/IEC Standards are the foundation on which the IEC CA Systems are based. Schorn has been active as an IEC representative and Coordinator in CASCO Working Groups for the last ten years. He has been actively involved in the preparation of ISO/IEC 17043, Conformity assessment – General requirements for proficiency testing; ISO/IEC 17065, General requirements for bodies operating product certification systems; and ISO/IEC 17026, Conformity assessment – Example of a certification scheme for tangible products. Since 2014, he has been the IEC Coordinator for CASCO WG 42, preparing the revision of ISO/IEC 17011, Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies. This standard is expected to be published in 2016. In 2015, a leadership structure with a Convener and two Co-conveners was agreed for the revision of ISO/IEC 17025, Conformity assessment – General requirements for the competence of testing and calibration laboratories. This is a very important Standard for IEC CA activities. CASCO WG 44 was created for this revision, with Schorn as Co-Convenor.


Bernd Sisolefsky, Past Chair, CISPR CIS/B, Germany

Dr Bernd Sisolefsky, former Chair of CISPR, the International special committee on radio interference, is an experienced EMC expert who has been active in IEC work since the early 1990s. During the last 25 years he has made countless contributions and held several offices in technical bodies under the CISPR roof. These include the role of Chair of CISPR/SC B from 2006 to September 2015. CISPR/B is responsible for standardization in the field of radio interference suppression of industrial, scientific and medical radio frequency equipment and also of high voltage lines and installations. During this period, the International Standard CISPR 11 was advanced two times, which culminated in the addition of requirements for grid connected power converters (GCPC), which serve for the connection of photovoltaic systems to the electricity distribution network. The addition of further requirements for wireless power transfer (WPT) devices was also started when Sisolefsky was Chair. Finally he also worked constantly within other technical bodies of CISPR, in particular in CISRP/F, which is responsible for radio interference suppression of household and similar electrical appliances and of lighting equipment, and in CISPR/I especially in the field of radio interference suppression of powerline telecommunications equipment.


About the Thomas Edison Award

Created in 2010, the Thomas A. Edison Award recognizes exceptional achievement (within the past five years), dedicated service and significant contributions to the IEC through the effective management of committees of currently active TC/SC Officers (Chair, Secretary or Assistant Secretary of a Technical Committee or Subcommittee) and officers of the IEC Conformity Assessment Systems and their subsidiary bodies.


TC/SC officers must have:

  • made an outstanding contribution, within the TC/SC, to the development and promotion of IEC systems and standards
  • been responsible, through the TC/SC, for an IEC activity that has had a significant impact on industry and/or commerce
  • been organizationally or technically responsible for a significant development in quality and timely performance by the TC/SC


Officers of a conformity assessment system or subsidiary body must have:

  • made an outstanding contribution, within one of the systems, to the development and promotion of IEC conformity assessment services or, through a system, to an IEC activity that has had a significant impact on industry and/or commerce beyond the conformity assessment community
  • been organizationally or technically responsible for a significant development in service quality and performance by an IEC conformity assessment system
  • made an outstanding contribution, in accordance with the IEC Policy on Conformity Assessment, to the development and promotion of IEC conformity assessment services outside the IEC systems

The IEC Thomas A. Edison Awards are presented by the Vice-Presidents or Chair of the respective SMB or CAB boards, at the meetings held in conjunction with the General Meeting, or on another suitable occasion.


Find out more

Media contact:

Gabriela Ehrlich
Tel: +41 22 919 02 78
Mob: +41 79 600 56 72
Email: Gabriela Ehrlich
Skype: gabriela.ehrlich


News release 2016-30

pdf file 31kB