Rotating electrical machines - Part 1: Rating and performance

Guide to specification of hydraulic turbine control systems

Railway applications - Electromagnetic compatibility - Part 1: General

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches

High-voltage switchgear and controlgear - Part 1: Common specifications

Low-voltage switchgear and controlgear - Part 1: General rules

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet

Low-voltage switchgear and controlgear - Controllers for drivers of stationary fire pumps

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

Electrical and electronic installations in ships - Electromagnetic compatibility

Electronic equipment for use in power installations

Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods

Assessment of lighting equipment related to human exposure to electromagnetic fields

Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements

Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements

Sound signalling devices for household and similar purposes

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

Circuit-breakers for equipment (CBE)

Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements

Electroacoustics - Hearing aids - Part 13: Electromagnetic compatibility (EMC)

Electroacoustics - Sound calibrators

Electroacoustics - Specifications for personal sound exposure meters

Electroacoustics - Octave-band and fractional-octave-band filters

Electroacoustics - Sound level meters - Part 1: Specifications

Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests

Electroacoustics - Instruments for the measurement of sound intensity - Electromagnetic and electrostatic compatibility requirements and test procedures

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation

Equipment for general lighting purposes - EMC immunity requirements

Instrument transformers - Part 7: Electronic voltage transformers

Instrument transformers - Part 8: Electronic current transformers

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

Nuclear power plants - Instrumentation and control important to safety - Requirements for electromagnetic compatibility testing

Metallic communication cable test methods - Part 4-1: Electromagnetic compatibility (EMC) - Introduction to electromagnetic (EMC) screening measurements

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions - TEM cell and wideband TEM cell method

Integrated circuits - Measurement of electromagnetic emissions, 150 KHz to 1 GHz - Part 3: Measurement of radiated emissions - Surface scan method

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 5: Measurement of conducted emissions - Workbench Faraday Cage method

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions

Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method

Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 3: Bulk current injection (BCI) method

Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks

Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility

Distribution automation using distribution line carrier systems - Part 3-1: Mains signalling requirements - Frequency bands and output levels

Communication networks and systems in substations - Part 3: General requirements

Household and similar electrical appliances - Safety - Part 1: General requirements

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and essential performance of ultrasonic medical diagnostic and monitoring equipment

Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac defibrillators

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances

Surge overvoltages and surge protection in low-voltage a.c. power systems - General basic information

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment

Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities

Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation

Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c./d.c. supply

Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station

Automatic electrical controls for household and similar use - Part 1: General requirements

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subjet to conditional connection

Alarm systems - Part 2: Electromagnetic compatibility - Immunity requirements for components of fire and security alarm systems

Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

Specified time relays for industrial use - Part 1: Requirements and tests

Measuring relays and protection equipment - Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port

Measuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests

Measuring relays and protection equipment - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests

Measuring relays and protection equipment - Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity

Measuring relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test

Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test

Electrical relays - Part 22-6: Electrical disturbance tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields

Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests

Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements

Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

Cabled distribution systems for television and sound signals - Part 12: Electromagnetic compatibility of systems

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement

Information technology equipment - Immunity characteristics - Limits and methods of measurement