International Standards and Conformity Assessment for all electrical, electronic and related technologies

TC 66

Safety of measuring, control and laboratory equipment

 

Detail

Committee
Working Groups
Project Leader

Current

Status

Frcst Pub

Date

Stability

Date

TC 66WG1J. RutanenPPUB2010-062015

History

Stage
Document
Downloads
Decision Date
Target Date
AMW
66/281/MCR  
2002-04-26 
1CD
66/333A/CD  
66/333/CD  
2003-07-042003-06-30
ACDV
66/337/CC  
2003-12-052003-11-15
CCDV
66/342/CDV  
66/342A/CDV  
2004-07-232004-06-30
NADIS
66/351/RVC  
66/351A/RVC  
2005-01-142005-04-30
CCDV
66/369/CDV  
2006-03-172005-04-30
NADIS
66/378/RVC  
2006-12-152006-11-30
CDVM
2007-06-272007-04-30
AMW
66/384/MCR  
2007-06-292007-06-15
1CD
66/385/CD  
2007-06-292007-06-30
CDM
66/393/CC  
2007-10-192007-10-15
ACDV
2008-01-182007-11-15
CCDV
66/400/CDV  
2009-01-162008-06-30
ADIS
66/411/RVC  
2009-11-202009-09-30
DEC
2009-11-212009-10-31
RDIS
2009-11-272009-12-15
CDIS
66/414/FDIS  
2010-02-052010-02-28
APUB
66/423/RVD  
2010-04-232010-04-15
BPUB
2010-04-242010-04-30
PPUB
2010-06-102010-05-31

Project

IEC 61010-1 Ed. 3.0

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

 

Remark:

- New MCR and 1CD 2007-06 -> Project Plan: CDV 2008-06 FDIS 2009-06 IS 2009-12 CDV: 2003-12 / FDIS: 2004-12 - Former project 61010-1A1Ed2 - TC 66 noted in its report to the SMB (document SMB/3064/R) that IEC 61010-2-030 had passed the vote at CDV but that IEC 61010-1 had not. They requested the SMB to agree to the issue of the FDIS for IEC 61010-2-030 in parallel with the FDIS for IEC 61010 -1 Ed 3 when approved. This was accepted at the SMB Cape Town meeting. However, the 2 projects will have their FDIS circulated before 2007-04-30 in order to avoid project 61010-1 Ed. 3.0 to exceed 5 years (see SMB/3206/DL)

 

Associated Documents:

66/322/RM

 
SMB/2486/DL

SMB/3206/DL

66/395/RM

 
66/497/ISH

 
66/500/DC

 
66/508/INF

 
66/563/RM