IEC 60050-826

International Electrotechnical Vocabulary - Part 826: Electrical installations

IEC 60065

Audio, video and similar electronic apparatus - Safety requirements

IEC 60076-10

Power transformers - Part 10: Determination of sound levels

IEC 60076-10-1

Power transformers - Part 10-1: Determination of sound levels - Application guide

IEC 60076-11

Power transformers - Part 11: Dry-type transformers

IEC 60076-12

Power transformers - Part 12: Loading guide for dry-type power transformers

IEC 60076-13

Power transformers - Part 13: Self-protected liquid-filled transformers

IEC 60076-15

Power transformers - Part 15: Gas-filled power transformers

IEC 60076-3

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

IEC 60076-4

Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

IEC 60076-5

Power transformers - Part 5: Ability to withstand short circuit

IEC 60076-6

Power transformers - Part 6: Reactors

IEC 60076-7

Power transformers - Part 7: Loading guide for oil-immersed power transformers

IEC 60076-8

Power transformers - Part 8: Application guide

IEC 60081

Double-capped fluorescent lamps - Performance specifications

IEC 60096-0-1

Radio-frequency cables. Part 0: Guide to the design of detailed specifications - Section One: Coaxial cables

IEC 60099-1

Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems

IEC 60099-4

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

IEC 60099-5

Surge arresters - Part 5: Selection and application recommendations - Section 1: General

IEC 60099-6

Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV and less

IEC 60107-1

Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies

IEC 60107-2

Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels

IEC 60107-3

Recommended methods of measurement on receivers for television broadcast transmissions. Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems

IEC 60107-4

Recommended methods of measurement on receivers for television broadcast transmissions. Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system

IEC 60107-5

Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system

IEC 60107-6

Recommended methods of measurement on receivers for television broadcast transmissions. Part 6: Measurements under conditions different from broadcast signal standards

IEC 60107-7

Methods of measurement on receivers for television - Part 7: HDTV displays

IEC 60127-1

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links

IEC 60127-10

Miniature fuses - Part 10: User guide for miniature fuses

IEC 60127-2

Miniature fuses - Part 2: Cartridge fuse-links

IEC 60127-3

Miniature fuses - Part 3: Sub-miniature fuse-links

IEC 60127-4

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types

IEC 60127-5

Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

IEC 60127-6

Miniature fuses - Part 6: Fuse-holders for miniature cartridge fuse-links

IEC 60137

Insulated bushings for alternating voltages above 1 000 V

IEC 60155

Glow-starters for fluorescent lamps

IEC 60168

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60189-1

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods

IEC 60189-2

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations

IEC 60189-3

Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples

IEC 60228

Conductors of insulated cables

IEC 60229

Electric cables - Tests on extruded oversheaths with a special protective function

IEC 60238

Edison screw lampholders

IEC 60269-1

Low-voltage fuses - Part 1: General requirements

IEC 60269-2

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J

IEC 60269-3

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F

IEC 60269-4

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices

IEC 60282-1

High-voltage fuses - Part 1: Current-limiting fuses

IEC 60282-2

High-voltage fuses - Part 2: Expulsion fuses

IEC 60315-1

Methods of measurement on radio receivers for various classes of emission. Part 1: General considerations and methods of measurement, including audio-frequency measurements

IEC 60315-3

Methods of measurement on radio receivers for various classes of emission. Part 3: Receivers for amplitude-modulated sound-broadcasting emissions

IEC 60315-4

Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions

IEC 60315-6

Methods of measurement on radio receivers for various classes of emission - Part 6: General purpose communication receivers

IEC 60331-1

Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm

IEC 60331-11

Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C

IEC 60331-2

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm

IEC 60331-21

Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV

IEC 60331-23

Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables

IEC 60331-25

Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables

IEC 60331-3

Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure

IEC 60332-1-1

Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

IEC 60332-1-2

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

IEC 60332-1-3

Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

IEC 60332-2-1

Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

IEC 60332-2-2

Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

IEC 60335-2-109

Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances

IEC 60335-2-26

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

IEC 60335-2-27

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation

IEC 60335-2-29

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

IEC 60335-2-40

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IEC 60364-4-41

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-5-51

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

IEC 60364-5-52

Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems

IEC 60399

Barrel thread for lampholders with shade holder ring

IEC 60400

Lampholders for tubular fluorescent lamps and starterholders

IEC 60423

Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings

IEC 60437

Radio interference test on high-voltage insulators

IEC 60461

Time and control code

IEC 60549

High-voltage fuses for the external protection of shunt power capacitors

IEC 60570

Electrical supply track systems for luminaires

IEC 60598-2-10

Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

IEC 60598-2-12

Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

IEC 60598-2-13

Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

IEC 60598-2-14

Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment

IEC 60598-2-17

Luminaires. Part 2: Particular requirements. Section Seventeen - Luminaires for stage lighting, television and film studios (outdoor and indoor)

IEC 60598-2-18

Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

IEC 60598-2-19

Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-20

Luminaires - Part 2-20: Particular requirements - Lighting chains

IEC 60598-2-25

Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

IEC 60598-2-5

Luminaires - Part 2-5: Particular requirements - Floodlights

IEC 60598-2-6

Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps

IEC 60598-2-7

Luminaires. Part 2: Particular requirements. Section Seven: Portable luminaires for garden use

IEC 60598-2-8

Luminaires- Part 2: Particular requirements - Section 8: Handlamps

IEC 60644

Specification for high-voltage fuse-links for motor circuit applications

IEC 60670-1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

IEC 60670-23

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures

IEC 60670-24

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and similar power consuming devices

IEC 60728-1

Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths

IEC 60728-2

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

IEC 60728-3

Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks

IEC 60728-4

Cable networks for television signals, sound signals and interactive services - Part 4: Passive wideband equipment for coaxial cable networks

IEC 60730-2-3

Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

IEC 60901

Single-capped fluorescent lamps - Performance specifications

IEC 60921

Ballasts for tubular fluorescent lamps - Performance requirements

IEC 60923

Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements

IEC 60927

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

IEC 60966-2-1

Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies

IEC 60966-2-2

Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies

IEC 60966-2-3

Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies - Frequency range 0 MHz to 1000 MHz, IEC 61169-8 connectors

IEC 60966-2-4

Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61169-2 connectors

IEC 60966-2-5

Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1000 MHz, IEC 61169-2 connectors

IEC 60966-2-6

Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3000 MHz, IEC 61169-24 connectors

IEC 60966-3

Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies

IEC 60966-3-1

Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies

IEC 60966-3-2

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

IEC 60966-4

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies

IEC 60966-4-1

Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies

IEC 60998-1

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements

IEC 60998-2-1

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units

IEC 60998-2-2

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units

IEC 60998-2-3

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units

IEC 60998-2-4

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices

IEC 61048

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

IEC 61049

Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements

IEC 61084-1

Cable trunking and ducting systems for electrical installations - Part 1: General requirements

IEC 61084-2-1

Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings

IEC 61084-2-2

Cable trunking and ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations

IEC 61084-2-4

Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 4: Service poles

IEC 61116

Electromechanical equipment guide for small hydroelectric installations

IEC 61138

Cables for portable earthing and short-circuiting equipment

IEC 61156-1

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

IEC 61156-2

Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification

IEC 61156-2-1

Multicore and symmetrical pair/quad cables for digital communications - Part 2-1: Horizontal floor wiring - Blank detail specification

IEC 61156-2-2

Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification

IEC 61156-3

Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification

IEC 61156-3-1

Multicore and symmetrical pair/quad cables for digital communications - Part 3-1: Work area wiring - Blank detail specification

IEC 61156-3-2

Multicore and symmetrical pair/quad cables for digital communications - Part 3-2: Work area wiring - Capability Approval - Sectional specification

IEC 61156-4

Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification

IEC 61156-4-1

Multicore and symmetrical pair/quad cables for digital communications - Part 4-1: Riser cables - Blank detail specification

IEC 61156-4-2

Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification

IEC 61169-4

Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16)

IEC 61196-2

Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation

IEC 61196-3

Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks

IEC 61196-3-1

Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s

IEC 61196-3-2

Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horinzontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks for 185 m reach and up to 10 Mb/s.

IEC 61196-3-3

Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s

IEC 61210

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements

IEC 61305-2

Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 2: FM radio tuners

IEC 61386-1

Conduit systems for cable management - Part 1: General requirements

IEC 61386-21

Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems

IEC 61557-1

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

IEC 61557-10

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures

IEC 61557-11

Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems

IEC 61557-12

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)

IEC 61557-2

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance

IEC 61557-3

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

IEC 61557-4

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

IEC 61557-5

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth

IEC 61557-6

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems

IEC 61557-7

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence

IEC 61557-8

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems

IEC 61643-12

Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power distribution systems - Selection and application principles

IEC 61643-21

Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods

IEC 61643-22

Low-voltage surge protective devices - Part 22: Surge protective devices connected to telecommunications and signalling networks - Selection and application principles

IEC 61914

Cable cleats for electrical installations

IEC 61937-11

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 11: MPEG-4 AAC and its extensions in LATM/LOAS

IEC 61937-12

Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 12: Non-linear PCM bitstreams according to the DRA formats

IEC 61995-1

Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements

IEC 62002-1

Mobile and portable DVB-T/H radio access - Part 1: Interface specification

IEC 62002-2

Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing

IEC 62028

General methods of measurement for digital television receivers

IEC 62041

Safety of transformers, reactors, power supply units and combinations thereof - EMC requirements

IEC 62052-11

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

IEC 62053-21

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

IEC 62053-31

Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)

IEC 62104

Characteristics of DAB receivers

IEC 62151

Safety of equipment electrically connected to a telecommunication network

IEC 62209-1

Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)

IEC 62209-2

Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)

IEC 62305-1

Protection against lightning - Part 1: General principles

IEC 62305-2

Protection against lightning - Part 2: Risk management

IEC 62305-3

Protection against lightning - Part 3: Physical damage to structures and life hazard

IEC 62577

Evaluation of human exposure to electromagnetic fields from a stand-alone broadcast transmitter (30 MHz - 40 GHz)

IEC/TR 60099-3

Surge arresters. Part 3: Artificial pollution testing of surge arresters

IEC/TR 60479-4

Effects of current on human beings and livestock - Part 4: Effects of lightning strokes on human beings and livestock

IEC/TR 60479-5

Effects of current on human beings and livestock - Part 5: Touch voltage threshold values for physiological effects

IEC/TR 60755

General requirements for residual current operated protective devices

IEC/TR 60787

Application guide for the selection of high-voltage current- limiting fuse-links for transformer circuits

IEC/TR 60882

Pre-heat requirements for starterless tubular fluorescent lamps

IEC/TR 62002-3

Mobile and portable DVB-T/H radio access - Part 3: Measurement Interface

IEC/TR 62002-4

Mobile and portable DVB-T/H radio access - Part 4: Measurement methods for total radiated sensitivity in hand-held broadcast terminals

IEC/TR 62630

Guidance for evaluating exposure from multiple electromagnetic sources

IEC/TS 60076-14

Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials

IEC/TS 60479-1

Effects of current on human beings and livestock - Part 1: General aspects

IEC/TS 60479-2

Effects of current on human beings and livestock - Part 2: Special aspects

IEC/TS 60479-3

Effects of current on human beings and livestock - Part 3: Effects of currents passing through the body of livestock

IEC/TS 61200-52

Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems

IEC/TS 61463

Bushings - Seismic qualification

IEC/TS 61464

Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregating medium of the main insulation (generally paper)