International Standards and Conformity Assessment for all electrical, electronic and related technologies

Afghanistan

IEC Affiliate country

 
Total Adoptions
export to xls file

Adoptions of IEC International Standards

sort upsort down
Title
sort upsort down
TC/SC
sort upsort down
National Reference
sort upsort down
Declaration Date
IEC 60071-1

Insulation co-ordination - Part 1: Definitions, principles and rules
TC 28AS 1152011
IEC 60081

Double-capped fluorescent lamps - Performance specifications
SC 34AAS 2532011
IEC 60085

Electrical insulation - Thermal evaluation and designation
TC 112AS 2272012
IEC 60104

Aluminium-magnesium-silicon alloy wire for overhead line conductors
TC 7AS 2282012
IEC 60137

Insulated bushings for alternating voltages above 1 000 V
SC 36AAS 2292012
IEC 60155

Glow-starters for fluorescent lamps
SC 34AAS 2542012
IEC 60156

Insulating liquids - Determination of the breakdown voltage at power frequency - Test method
TC 10AS 2302012
IEC 60168

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
SC 36CAS 2312012
IEC 60183

Guide to the selection of high-voltage cables
TC 20AS 1142011
IEC 60214-1

Tap-changers - Part 1: Performance requirements and test methods
TC 14AS 3082012
IEC 60214-2

Tap-changers - Part 2: Application guide
TC 14AS 3092012
IEC 60227-1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
TC 20AS 2322012
IEC 60227-5

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
TC 20AS 2582012
IEC 60227-6

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
TC 20AS 2332012
IEC 60227-7

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
TC 20AS 2592011
IEC 60228

Conductors of insulated cables
TC 20AS 2342012
IEC 60273

Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
SC 36CAS 1172011
IEC 60287-1-1

Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
TC 20AS 2352012
IEC 60304

Standard colours for insulation for low-frequency cables and wires
SC 46CAS 2362012
IEC 60305

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type
SC 36BAS 1182011
IEC 60309-1

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
SC 23HAS 3102012
IEC 60309-2

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
SC 23HAS 3112012
IEC 60309-4

Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock
SC 23HAS 3122012
IEC 60317-3

Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155
TC 55AS 3132012
IEC 60331-2

Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
TC 20AS 2372012
IEC 60331-23

Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
TC 20AS 2382012
IEC 60332-3-10

Tests on electric cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
TC 20AS 2392012
IEC 60358

Coupling capacitors and capacitor dividers
TC 33AS 2402012
IEC 60383-1

Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
SC 36BAS 1192011
IEC 60433

Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type
SC 36BAS 1202011
IEC 60437

Radio interference test on high-voltage insulators
TC 36AS 2412012
IEC 60464-2

Varnishes used for electrical insulation - Part 2: Methods of test
TC 15AS 2562012
IEC 60471

Dimensions of clevis and tongue couplings of string insulator units
SC 36BAS 2422012
IEC 60481

Coupling devices for power line carrier systems
TC 57AS 2432012
IEC 60502-1

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
TC 20AS 2442012
IEC 60502-2

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
TC 20AS 1102011
IEC 60507

Artificial pollution tests on high-voltage insulators to be used on a.c. systems
TC 36AS 2452012
IEC 60529

Degrees of protection provided by enclosures (IP Code)
TC 70AS 3022012
IEC 60664-1

Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
TC 109AS 1162011
IEC 60720

Characteristics of line post insulators
SC 36BAS 3142012
IEC 60811-1-1

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
TC 20AS 2462012
IEC 60888

Zinc-coated steel wires for stranded conductors
TC 7AS 1122011
IEC 60889

Hard-drawn aluminium wire for overhead line conductors
TC 7AS 1112011
IEC 61089

Round wire concentric lay overhead electrical stranded conductors
TC 7AS 1132011
IEC 61140

Protection against electric shock - Common aspects for installation and equipment
TC 64AS 1212011
IEC 61199

Single-capped fluorescent lamps - Safety specifications
SC 34AAS 2552012
IEC 61238-1

Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
TC 20AS 2472012
IEC 61395

Overhead electrical conductors - Creep test procedures for stranded conductors
TC 7AS 2482012
IEC 61537

Cable management - Cable tray systems and cable ladder systems
SC 23AAS 3032012
IEC 61773

Overhead lines - Testing of foundations for structures
TC 11AS 2492012
IEC 61858

Electrical insulation systems - Thermal evaluation of modifications to an established wire-wound EIS
TC 112AS 2502012
IEC 62056-21

Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange
TC 13AS 2522012
IEC 62262

Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
TC 70AS 3012012
IEC 62305-1

Protection against lightning - Part 1: General principles
TC 81AS 3042012
IEC 62305-2

Protection against lightning - Part 2: Risk management
TC 81AS 3052012
IEC 62305-3

Protection against lightning - Part 3: Physical damage to structures and life hazard
TC 81AS 3062012
IEC 62305-4

Protection against lightning - Part 4: Electrical and electronic systems within structures
TC 81AS 3072012
IEC/TR 62051

Electricity metering - Glossary of terms
TC 13AS 2512012