International Standards and Conformity Assessment for all electrical, electronic and related technologies

Sudan

IEC Affiliate country

 
Total Adoptions
export to xls file

Adoptions of IEC International Standards

sort upsort down
Title
sort upsort down
TC/SC
sort upsort down
National Reference
sort upsort down
Declaration Date
IEC 60086-1

Primary batteries - Part 1: General
TC 35SDS 4631-12010
IEC 60086-2

Primary batteries - Part 2: Physical and electrical specifications
TC 35SDS 4631-22010
IEC 60086-3

Primary batteries - Part 3: Watch batteries
TC 35SDS 4631-32010
IEC 60086-4

Primary batteries - Part 4: Safety of lithium batteries
TC 35SDS 4631-42010
IEC 60086-5

Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
TC 35SDS 4631-52010
IEC 60227-1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
TC 20SDS 4255-12009-05
IEC 60227-2

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
TC 20SDS 4255-22009-05
IEC 60227-3

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
TC 20SDS 4255-32009-05
IEC 60227-4

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
TC 20SDS 4255-42009-05
IEC 60227-5

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. - Part 5: Flexible cables (cords)
TC 20SDS 4255-52009-05
IEC 60227-6

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
TC 20SDS 4255-62009-05
IEC 60227-7

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
TC 20SDS 4255-72009-05
IEC 60228

Conductors of insulated cables
TC 20SDS 44352010
IEC 60229

Electric cables - Tests on extruded oversheaths with a special protective function
TC 20SDS 44372010
IEC 60230

Impulse tests on cables and their accessories
TC 20SDS 44362010
IEC 60245-1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
TC 20SDS 4434-12010
IEC 60245-2

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
TC 20SDS 4434-22010
IEC 60245-3

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
TC 20SDS 4434-32010
IEC 60245-4

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
TC 20SDS 4434-42010
IEC 60245-5

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
TC 20SDS 4434-52010
IEC 60245-6

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
TC 20SDS 4434-62010
IEC 60245-7

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
TC 20SDS 4434-72010
IEC 60245-8

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
TC 20SDS 4434-82010
IEC 60287-1-1

Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
TC 20SDS 1137-1-12010
IEC 60287-1-2

Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation
TC 20SDS 1137-1-22010
IEC 60287-1-3

Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
TC 20SDS 1137-1-32010
IEC 60287-2-1

Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 1: Calculation of thermal resistance
TC 20SDS 1137-2-12010
IEC 60287-2-2

Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
TC 20SDS 1137-2-22010
IEC 60287-3-1

Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable type
TC 20SDS 1137-3-12010
IEC 60287-3-2

Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size
TC 20SDS 1137-3-22010
IEC 60311

Electric irons for household or similar use - Methods for measuring performance
SC 59LSDS 49412011
IEC 60312-2

Vacuum cleaners for household use - Part 2: Wet cleaning appliances - Methods of measuring the performance
SC 59FSDS 4942-22011
IEC 60335-2-2

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
TC 61SDS 4939-2-22011
IEC 60335-2-3

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
TC 61SDS 4940-2-32011
IEC 60335-2-7

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
TC 61SDS 4938-2-72011
IEC 60502-1

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
TC 20SDS 1264-12010
IEC 60502-4

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<sub>m</sub> = 1,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV)
TC 20SDS 1264-42010
IEC 60508

Methods for measuring the performance of electric ironing machines for household and similar purposes
SC 59LSDS 46572010
IEC 60535

Jet fans and regulators
TC 59SDS 45292010
IEC 60601-1-1

Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems
SC 62ASDS 4586-1-12010
IEC 60601-1-10

Medical electrical equipment - Part 1-10: General requirements for basic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loop controllers
SC 62ASDS 4586-1-102010
IEC 60601-1-2

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests
SC 62ASDS 4586-1-22010
IEC 60601-1-6

Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability
SC 62ASDS 4586-1-62010
IEC 60601-1-8

Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
SC 62ASDS 4586-1-82010
IEC 60601-2-16

Medical electrical equipment - Part 2-16: Particular requirements for basic safety and essential performance of haemodialysis, haemodiafiltration and haemofiltration equipment
SC 62DSDS 4586-2-162011
IEC 60601-2-19

Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
SC 62DSDS 4586-2-192011
IEC 60601-2-20

Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
SC 62DSDS 4586-2-202011
IEC 60601-2-36

Medical electrical equipment - Part 2: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy
SC 62DSDS 4586-2-362011
IEC 60601-2-50

Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and essential performance of infant phototherapy equipment
SC 62DSDS 4586-2-502011
IEC 60665

A.C. electric ventilating fans and regulators for household and similar purposes
TC 59SDS 45312010
IEC 60702-1

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
TC 20SDS 1128-12010
IEC 60702-2

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
TC 20SDS 1128-22010
IEC 60715

Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations
SC 17BSDS 47032010
IEC 60719

Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
TC 20SDS 45832010
IEC 60789

Medical electrical equipment - Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras
SC 62CSDS 49882011
IEC 60811-1-1

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
TC 20SDS 4555-1-12010
IEC 60811-1-2

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods
TC 20SDS 4555-1-22010
IEC 60811-1-3

Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density - Water absorption tests - Shrinkage test
TC 20SDS 4555-1-32010
IEC 60811-1-4

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature
TC 20SDS 4555-1-42010
IEC 60811-3-1

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high temperature - Tests for resistance to cracking
TC 20SDS 4555-3-12010
IEC 60811-3-2

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section Two: Loss of mass test - Thermal stability test
TC 20SDS 4555-3-22010
IEC 60879

Performance and construction of electric circulating fans and regulators
TC 59SDS 45302010
IEC 60884-1

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
SC 23BSDS 4623-12010
IEC 60884-2-1

Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs
SC 23BSDS 4623-2-12010
IEC 60884-2-2

Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances
SC 23BSDS 4623-2-22010
IEC 60884-2-3

Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
SC 23BSDS 4623-2-32010
IEC 60884-2-5

Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors
SC 23BSDS 4623-2-52010
IEC 60906-1

IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
SC 23CSDS 4630-12010
IEC 60906-2

IEC system of plugs and socket-outlets for household and similar purposes - Part 2: Plugs and socket-outlets 15 A 125 V a.c.
SC 23CSDS 4630-22010
IEC 60947-1

Low-voltage switchgear and controlgear - Part 1: General rules
SC 17BSDS 4801-12011
IEC 60947-2

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
SC 17BSDS 4801-22011
IEC 60947-3

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
SC 17BSDS 4801-32011
IEC 60947-4-1

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
SC 17BSDS 4801-4-12011
IEC 60947-4-2

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
SC 17BSDS 4801-4-22011
IEC 60947-4-3

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
SC 17BSDS 4801-4-32011
IEC 60947-5-1

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
SC 17BSDS 4801-5-12011
IEC 60947-5-2

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
SC 17BSDS 4801-5-22011
IEC 60947-5-3

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
SC 17BSDS 4801-5-32011
IEC 60947-5-4

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests
SC 17BSDS 4801-5-42011
IEC 60947-5-5

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function
SC 17BSDS 4801-5-52011
IEC 60947-5-6

Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
SC 17BSDS 4801-5-62011
IEC 60947-5-7

Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
SC 17BSDS 4801-5-72011
IEC 60947-6-1

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
SC 17BSDS 4801-6-12011
IEC 60947-6-2

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
SC 17BSDS 4801-6-22011
IEC 60947-7-1

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
SC 17BSDS 4801-7-12011
IEC 60947-7-2

Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors
SC 17BSDS 4801-7-22011
IEC 60947-7-3

Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks
SC 17BSDS 4801-7-32011
IEC 60947-8

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
SC 17BSDS 4801-82011
IEC 61095

Electromechanical contactors for household and similar purposes
SC 17BSDS 47012010
IEC 61675-1

Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
SC 62CSDS 5002-12011
IEC 61675-2

Radionuclide imaging devices - Characteristics and test conditions - Part 2: Single photon emission computed tomographs
SC 62CSDS 5002-22011
IEC 61675-3

Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems
SC 62CSDS 5002-32011
IEC 61915-1

Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles
SC 17BSDS 47002010
IEC 62052-11

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
TC 13SDS 1223-12010
IEC 62053-11

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
TC 13SDS 1222-112010
IEC 62053-21

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
TC 13SDS 1222-212010
IEC 62110

Electric and magnetic field levels generated by AC power systems - Measurement procedures with regard to public exposure
TC 106SDS 48992011
IEC 62208

Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements
SC 17DSDS 49542011
IEC 62281

Safety of primary and secondary lithium cells and batteries during transport
TC 35SDS 46242010
IEC/TR 60649

Calculation of maximum external diameter of cables for indoor installations
SC 46CSDS 12132010
IEC/TR 60890

A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
SC 17DSDS 47022010