IEC 60027-1

Letter symbols to be used in electrical technology - Part 1: General (Corrected and reprinted 1995-03-31)

IEC 60027-2

Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics

IEC 60027-3

Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units

IEC 60027-4

Letter symbols to be used in electrical technology - Part 4: Rotating electric machines

IEC 60028

International standard of resistance for copper

IEC 60038

IEC standard voltages

IEC 60050-441

International Electrotechnical Vocabulary. Switchgear, controlgear and fuses

IEC 60050-461

International Electrotechnical Vocabulary - Part 461: Electric cables

IEC 60060-1

High-voltage test techniques - Part 1: General definitions and test requirements

IEC 60065

Audio, video and similar electronic apparatus - Safety requirements

IEC 60065

Audio, video and similar electronic apparatus - Safety requirements

IEC 60068-2-30

Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IEC 60068-2-6

Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)

IEC 60068-2-75

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

IEC 60073

Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators

IEC 60079-14

Explosive atmospheres - Part 14: Electrical installations design, selection and erection

IEC 60079-17

Explosive atmospheres - Part 17: Electrical installations inspection and maintenance

IEC 60079-19

Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation

IEC 60085

Electrical insulation - Thermal evaluation and designation

IEC 60086-1

Primary batteries - Part 1: General

IEC 60086-2

Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-3

Primary batteries - Part 3: Watch batteries

IEC 60086-4

Primary batteries - Part 4: Safety of lithium batteries

IEC 60086-5

Primary batteries - Part 5: Safety of batteries with aqueous electrolyte

IEC 60095-1

Lead-acid starter batteries - Part 1: General requirements and methods of test

IEC 60095-2

Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals

IEC 60095-4

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles

IEC 60099-1

Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems

IEC 60099-4

Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems

IEC 60099-5

Surge arresters - Part 5: Selection and application recommendations - Section 1: General

IEC 60112

Method for the determination of the proof and the comparative tracking indices of solid insulating materials

IEC 60127-10

Miniature fuses - Part 10: User guide for miniature fuses

IEC 60127-4

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types

IEC 60127-4

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types

IEC 60127-5

Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links

IEC 60127-6

Miniature fuses - Part 6: Fuse-holders for miniature cartridge fuse-links

IEC 60155

Glow-starters for fluorescent lamps

IEC 60167

Methods of test for the determination of the insulation resistance of solid insulating materials

IEC 60183

Guide to the selection of high-voltage cables

IEC 60227-1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60227-2

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods

IEC 60230

Impulse tests on cables and their accessories

IEC 60245-1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60245-2

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods

IEC 60245-3

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables

IEC 60245-4

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables

IEC 60245-5

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables

IEC 60245-6

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables

IEC 60245-7

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables

IEC 60245-8

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility

IEC 60254-1

Lead-acid traction batteries - Part 1: General requirements and methods of tests

IEC 60254-2

Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells

IEC 60269-1

Low-voltage fuses - Part 1: General requirements

IEC 60269-1

Low-voltage fuses - Part 1: General requirements

IEC 60269-2

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J

IEC 60269-3

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F

IEC 60269-3

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F

IEC 60269-4

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices

IEC 60309-1

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

IEC 60309-1

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

IEC 60309-2

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

IEC 60309-2

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

IEC 60335-1

Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-1

Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-2-10

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines

IEC 60335-2-10

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines

IEC 60335-2-11

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers

IEC 60335-2-11

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers

IEC 60335-2-12

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

IEC 60335-2-12

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

IEC 60335-2-13

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

IEC 60335-2-13

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances

IEC 60335-2-14

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines

IEC 60335-2-14

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines

IEC 60335-2-15

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids

IEC 60335-2-15

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids

IEC 60335-2-16

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers

IEC 60335-2-2

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

IEC 60335-2-2

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

IEC 60335-2-21

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

IEC 60335-2-21

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

IEC 60335-2-23

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care

IEC 60335-2-23

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care

IEC 60335-2-24

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

IEC 60335-2-24

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

IEC 60335-2-25

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-25

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-26

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

IEC 60335-2-26

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks

IEC 60335-2-29

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

IEC 60335-2-29

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

IEC 60335-2-3

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

IEC 60335-2-3

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

IEC 60335-2-30

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters

IEC 60335-2-30

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters

IEC 60335-2-35

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

IEC 60335-2-35

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

IEC 60335-2-4

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors

IEC 60335-2-4

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors

IEC 60335-2-40

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IEC 60335-2-40

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

IEC 60335-2-5

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers

IEC 60335-2-5

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers

IEC 60335-2-59

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers

IEC 60335-2-59

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers

IEC 60335-2-6

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

IEC 60335-2-6

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

IEC 60335-2-66

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters

IEC 60335-2-66

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters

IEC 60335-2-7

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

IEC 60335-2-7

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

IEC 60335-2-74

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters

IEC 60335-2-74

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters

IEC 60335-2-80

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

IEC 60335-2-80

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

IEC 60335-2-84

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets

IEC 60335-2-84

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets

IEC 60335-2-9

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

IEC 60335-2-98

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers

IEC 60335-2-98

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers

IEC 60360

Standard method of measurement of lamp cap temperature rise

IEC 60364-1

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

IEC 60364-4-41

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-4-42

Low-voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects

IEC 60364-4-43

Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent

IEC 60364-5-51

Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules

IEC 60364-5-53

Electrical installations of buildings - Part 5-53: Selection and erection of electrical equipment - Isolation, switching and control

IEC 60364-5-54

Electrical installations of buildings - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors

IEC 60364-5-56

Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services

IEC 60364-7-701

Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

IEC 60364-7-702

Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains

IEC 60364-7-703

Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters

IEC 60364-7-704

Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations

IEC 60364-7-705

Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises

IEC 60364-7-706

Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement

IEC 60364-7-708

Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations

IEC 60364-7-709

Low-voltage electrical installations - Part 7-709: Requirements for special installations or locations - Marinas and similar locations

IEC 60364-7-713

Electrical installations of buildings - Part 7: Requirements for special installations and locations - Section 713: Furniture

IEC 60364-7-714

Electrical installations of buildings - Part 7: Requirements for special installations or locations - Section 714: External lighting installations

IEC 60410

Sampling plans and procedures for inspection by attributes

IEC 60439-2

Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)

IEC 60439-2

Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)

IEC 60439-3

Low-voltage switchgear and controlgear assemblies. Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

IEC 60439-3

Low-voltage switchgear and controlgear assemblies. Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards

IEC 60439-4

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

IEC 60439-4

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)

IEC 60445

Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors

IEC 60447

Basic and safety principles for man-machine interface, marking and identification - Actuating principles

IEC 60529

Degrees of protection provided by enclosures (IP Code)

IEC 60529

Degrees of protection provided by enclosures (IP Code)

IEC 60598-2-1

Luminaires. Part 2: Particular requirements. Section One: Fixed general purpose luminaires

IEC 60598-2-10

Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

IEC 60598-2-17

Luminaires. Part 2: Particular requirements. Section Seventeen - Luminaires for stage lighting, television and film studios (outdoor and indoor)

IEC 60598-2-18

Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications

IEC 60598-2-19

Luminaires. Part 2: Particular requirements. Section Nineteen: Air-handling luminaires (safety requirements)

IEC 60598-2-2

Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires

IEC 60598-2-20

Luminaires - Part 2-20: Particular requirements - Lighting chains

IEC 60598-2-22

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

IEC 60598-2-22

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

IEC 60598-2-23

Luminaires - Part 2: Particular requirements - Section 23: Extra low voltage lighting systems for filament lamps

IEC 60598-2-24

Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

IEC 60598-2-25

Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings

IEC 60598-2-3

Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

IEC 60598-2-4

Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires

IEC 60598-2-5

Luminaires - Part 2-5: Particular requirements - Floodlights

IEC 60598-2-6

Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps

IEC 60598-2-7

Luminaires. Part 2: Particular requirements. Section Seven: Portable luminaires for garden use

IEC 60598-2-8

Luminaires- Part 2: Particular requirements - Section 8: Handlamps

IEC 60598-2-8

Luminaires- Part 2: Particular requirements - Section 8: Handlamps

IEC 60598-2-9

Luminaires. Part 2: Particular requirements. Section Nine: Photo and film luminaires (non-professional)

IEC 60601-1

Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1-1

Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems

IEC 60601-1-2

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

IEC 60601-1-3

Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

IEC 60669-1

Switches for household and similar fixed-electrical installations - Part 1: General requirements

IEC 60669-2-2

Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)

IEC 60669-2-3

Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)

IEC 60670-22

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures

IEC 60682

Standard method of measuring the pinch temperature of quartz-tungsten-halogen lamps

IEC 60715

Dimensions of low-voltage switchgear and controlgear. Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations

IEC 60721-1

Classification of environmental conditions - Part 1: Environmental parameters and their severities

IEC 60721-3-0

Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities. Introduction

IEC 60721-3-2

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation

IEC 60721-3-3

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations

IEC 60721-3-4

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations

IEC 60721-3-5

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations

IEC 60721-3-7

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use

IEC 60721-3-9

Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products

IEC 60730-1

Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-1

Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-2-2

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors

IEC 60730-2-2

Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors

IEC 60730-2-3

Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

IEC 60730-2-3

Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps

IEC 60730-2-4

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

IEC 60730-2-4

Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type

IEC 60730-2-5

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

IEC 60730-2-5

Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems

IEC 60730-2-6

Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

IEC 60730-2-6

Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

IEC 60730-2-7

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

IEC 60730-2-7

Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches

IEC 60745-1

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

IEC 60745-2-1

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills

IEC 60745-2-12

Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for concrete vibrators

IEC 60745-2-4

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

IEC 60745-2-6

Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers

IEC 60811-1-1

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

IEC 60811-1-2

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods

IEC 60811-1-3

Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density - Water absorption tests - Shrinkage test

IEC 60811-1-4

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature

IEC 60811-2-1

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests

IEC 60811-3-1

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high temperature - Tests for resistance to cracking

IEC 60811-3-2

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section Two: Loss of mass test - Thermal stability test

IEC 60811-4-1

Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope

IEC 60839-1-1

Alarm systems. Part 1: General requirements. Section One: General

IEC 60839-1-2

Alarm systems. Part 1: General requirements. Section Two: Power units, test methods and performance criteria

IEC 60839-1-3

Alarm systems. Part 1: General requirements. Section Three: Environmental testing

IEC 60839-1-4

Alarm systems. Part 1: General requirements. Section Four: Code of practice

IEC 60839-10-1

Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars

IEC 60839-2-2

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Two: Requirements for detectors - General

IEC 60839-2-3

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Three: Requirements for infrared-beam interruption detectors in buildings

IEC 60839-2-4

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Four: Ultrasonic Doppler detectors for use in buildings

IEC 60839-2-5

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Five: Microwave Doppler detectors for use in buildings

IEC 60839-2-6

Alarm systems. Part 2: Requirements for intruder alarm systems. Section Six: Passive infra-red detectors for use in buildings

IEC 60839-2-7

Alarm systems - Part 2: Requirements for intruder alarm systems - Section 7: Passive glass-break detectors for use in buildings

IEC 60865-1

Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods

IEC 60901

Single-capped fluorescent lamps - Performance specifications

IEC 60909-0

Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents

IEC 60909-3

Short-circuit currents in three-phase AC systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth

IEC 60921

Ballasts for tubular fluorescent lamps - Performance requirements

IEC 60925

D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

IEC 60927

Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements

IEC 60929

AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

IEC 60947-1

Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-1

Low-voltage switchgear and controlgear - Part 1: General rules

IEC 60947-2

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-2

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

IEC 60947-3

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60947-3

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60947-4-1

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

IEC 60947-4-1

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters

IEC 60947-4-2

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

IEC 60947-4-2

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters

IEC 60947-5-1

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

IEC 60947-6-1

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

IEC 60947-6-1

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment

IEC 60947-6-2

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

IEC 60947-6-2

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

IEC 60947-7-1

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

IEC 60947-7-1

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

IEC 60968

Self-ballasted lamps for general lighting services - Safety requirements

IEC 60969

Self-ballasted lamps for general lighting services - Performance requirements

IEC 60990

Methods of measurement of touch current and protective conductor current

IEC 60998-1

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements

IEC 60998-2-1

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units

IEC 60998-2-2

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units

IEC 60998-2-3

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units

IEC 60998-2-4

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices

IEC 60999-1

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)

IEC 60999-2

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)

IEC 61000-4-11

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

IEC 61000-4-2

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

IEC 61000-4-3

Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

IEC 61000-4-4

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

IEC 61000-4-5

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

IEC 61000-4-6

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

IEC 61032

Protection of persons and equipment by enclosures - Probes for verification

IEC 61056-1

General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test

IEC 61056-2

General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking

IEC 61095

Electromechanical contactors for household and similar purposes

IEC 61194

Characteristic parameters of stand-alone photovoltaic (PV) systems

IEC 61196-2

Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation

IEC 61196-3

Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks

IEC 61196-3-1

Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s

IEC 61196-3-2

Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horinzontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks for 185 m reach and up to 10 Mb/s.

IEC 61196-3-3

Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s

IEC 61196-4

Coaxial communication cables - Part 4: Sectional specification for radiating cables

IEC 61199

Single-capped fluorescent lamps - Safety specifications

IEC 61204

Low-voltage power supply devices, d.c. output - Performance characteristics

IEC 61204-6

Low-voltage power supplies, d.c. output - Part 6: Requirements for low-voltage power supplies of assessed performance

IEC 61210

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements

IEC 61215

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval

IEC 61293

Marking of electrical equipment with ratings related to electrical supply - Safety requirements

IEC 61347-2-1

Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters)

IEC 61347-2-2

Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

IEC 61347-2-3

Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps

IEC 61347-2-7

Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting

IEC 61347-2-8

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

IEC 61347-2-9

Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)

IEC 61347-2-9

Lamp controlgear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)

IEC 61558-1

Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests

IEC 61558-1

Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests

IEC 61558-2-1

Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications

IEC 61558-2-1

Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications

IEC 61558-2-13

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers

IEC 61558-2-15

Safety of power transformers, power supply units and similar - Part 2-15: Particular requirements for isolating transformers for the supply of medical locations

IEC 61558-2-2

Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers

IEC 61558-2-2

Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers

IEC 61558-2-23

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites

IEC 61558-2-3

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners

IEC 61558-2-4

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

IEC 61558-2-5

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units

IEC 61558-2-6

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

IEC 61558-2-7

Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys

IEC 61558-2-7

Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys

IEC 61558-2-8

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes

IEC 61646

Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval

IEC 61727

Photovoltaic (PV) systems - Characteristics of the utility interface

IEC 61951-1

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

IEC 61951-2

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride

IEC 62040-3

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

IEC 62133

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

IEC 62151

Safety of equipment electrically connected to a telecommunication network

IEC 62305-1

Protection against lightning - Part 1: General principles

IEC 62305-3

Protection against lightning - Part 3: Physical damage to structures and life hazard

IEC/TR 60099-3

Surge arresters. Part 3: Artificial pollution testing of surge arresters

IEC/TR 60755

General requirements for residual current operated protective devices

IEC/TR 60882

Pre-heat requirements for starterless tubular fluorescent lamps

IEC/TR 60909-1

Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0

IEC/TR 60909-2

Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations

IEC/TR 60909-4

Short-circuit currents in three-phase a.c. systems - Part 4: Examples for the calculation of short-circuit currents

IEC/TS 60865-2

Short-circuit currents - Calculation of effects - Part 2: Examples of calculation

IEC/TS 61836

Solar photovoltaic energy systems - Terms, definitions and symbols