CISPR 13

Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement

CISPR 16-1-1

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus

CISPR 16-1-2

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances

CISPR 16-1-3

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power

CISPR 16-1-4

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements

CISPR 16-1-5

Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1 000 MHz

CISPR 16-2-1

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements

CISPR 16-2-2

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power

CISPR 16-2-3

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-4

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements

CISPR 16-4-2

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements

CISPR 20

Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement

CISPR/TR 16-3

Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports

CISPR/TR 16-4-1

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests

CISPR/TR 16-4-3

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-3: Uncertainties, statistics and limit modelling - Statistical considerations in the determination of EMC compliance of mass-produced products

CISPR/TR 16-4-4

Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services

IEC 60050-723

International Electrotechnical Vocabulary - Chapter 723: Broadcasting: Sound, television, data

IEC 60065

Audio, video and similar electronic apparatus - Safety requirements

IEC 60076-1

Power transformers - Part 1: General

IEC 60076-10

Power transformers - Part 10: Determination of sound levels

IEC 60076-10-1

Power transformers - Part 10-1: Determination of sound levels - Application guide

IEC 60076-11

Power transformers - Part 11: Dry-type transformers

IEC 60076-13

Power transformers - Part 13: Self-protected liquid-filled transformers

IEC 60076-2

Power transformers - Part 2: Temperature rise

IEC 60076-3

Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air

IEC 60076-4

Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors

IEC 60076-5

Power transformers - Part 5: Ability to withstand short circuit

IEC 60076-7

Power transformers - Part 7: Loading guide for oil-immersed power transformers

IEC 60076-8

Power transformers - Part 8: Application guide

IEC 60094-1

Magnetic tape sound recording and reproducing systems. Part 1: General conditions and requirements

IEC 60107-2

Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels

IEC 60107-3

Recommended methods of measurement on receivers for television broadcast transmissions. Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems

IEC 60107-7

Methods of measurement on receivers for television - Part 7: HDTV displays

IEC 60151-28

Measurements of the electrical properties of electronic tubes and valves. Part 28: Methods of measurement of colour television picture tubes

IEC 60197

High-voltage connecting wire with flame retarding insulation for use in television receivers

IEC 60227-4

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

IEC 60244-10

Methods of measurement for radio transmitters. Part 10: Methods of measurement for television transmitters and transposers employing insertion test signals

IEC 60244-5

Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters

IEC 60244-8

Methods of measurement for radio transmitters - Part 8: Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers

IEC 60246

Connecting wires having a rated voltage of 20 kV and 25 kV d.c. and a maximum working temperature of 105 °C for use in television receivers

IEC 60309-1

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

IEC 60309-2

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories

IEC 60311

Electric irons for household or similar use - Methods for measuring performance

IEC 60315-1

Methods of measurement on radio receivers for various classes of emission. Part 1: General considerations and methods of measurement, including audio-frequency measurements

IEC 60335-1

Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-2-102

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections

IEC 60335-2-103

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows

IEC 60335-2-104

Household and similar electrical appliances - Safety - Part 2-104: Particular requirements for appliances to recover and/or recycle refrigerant from air conditioning and refrigeration equipment

IEC 60335-2-105

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets

IEC 60335-2-3

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

IEC 60335-2-69

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use

IEC 60335-2-80

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

IEC 60335-2-9

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

IEC 60335-2-97

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment

IEC 60364-4-41

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-7-753

Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Floor and ceiling heating systems

IEC 60461

Time and control code

IEC 60510-3-4

Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement on combinations of sub-systems - Section four: Measurements for frequency division multiplex (f.d.m.) transmission

IEC 60598-1

Luminaires - Part 1: General requirements and tests

IEC 60601-1

Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

IEC 60601-1-1

Medical electrical equipment - Part 1-1: General requirements for safety - Collateral standard: Safety requirements for medical electrical systems

IEC 60601-1-2

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests

IEC 60601-1-3

Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment

IEC 60601-1-4

Medical electrical equipment - Part 1: General requirements for safety - 4. Collateral standard: Programmable electrical medical systems

IEC 60601-1-6

Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability

IEC 60601-1-8

Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems

IEC 60601-2-51

Medical electrical equipment - Part 2-51: Particular requirements for safety, including essential performance, of recording and analysing single channel and multichannel electrocardiographs

IEC 60704-2-13

Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods

IEC 60950-1

Information technology equipment - Safety - Part 1: General requirements

IEC 60968

Self-ballasted lamps for general lighting services - Safety requirements

IEC 60969

Self-ballasted lamps for general lighting services - Performance requirements

IEC 61097-6

Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)

IEC 61158-2

Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition

IEC 61225

Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies

IEC 61241-0

Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements

IEC 61241-2-1

Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust

IEC 61300-3-18

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector

IEC 61300-3-29

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components

IEC 61308

High-frequency dielectric heating installations - Test methods for the determination of power output

IEC 61326-1

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements

IEC 61326-2-1

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

IEC 61326-2-2

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems

IEC 61326-2-6

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment

IEC 61347-2-2

Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps

IEC 61400-1

Wind turbines - Part 1: Design requirements

IEC 61400-11

Wind turbine generator systems - Part 11: Acoustic noise measurement techniques

IEC 61400-12-1

Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines

IEC 61400-2

Wind turbines - Part 2: Design requirements for small wind turbines

IEC 61400-21

Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines

IEC 61508-1

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61508-2

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61508-3

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61508-4

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61508-5

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61508-6

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61508-7

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC 61511-1

Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements

IEC 61511-2

Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1

IEC 61511-3

Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels

IEC 61606-4

Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 4: Personal computer

IEC 61754-6

Fibre optic connector interfaces - Part 6: Type MU connector family

IEC 61755-1

Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance

IEC 61850-10

Communication networks and systems in substations - Part 10: Conformance testing

IEC 61850-3

Communication networks and systems in substations - Part 3: General requirements

IEC 61850-4

Communication networks and systems in substations - Part 4: System and project management

IEC 61850-5

Communication networks and systems in substations - Part 5: Communication requirements for functions and device models

IEC 61850-6

Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs

IEC 61850-7-1

Communication networks and systems in substations - Part 7-1: Basic communication structure for substation and feeder equipment - Principles and models

IEC 61850-7-2

Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI)

IEC 61850-7-3

Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes

IEC 61850-7-4

Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes

IEC 61850-8-1

Communication networks and systems in substations - Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3

IEC 61850-9-1

Communication networks and systems in substations - Part 9-1: Specific Communication Service Mapping (SCSM) - Sampled values over serial unidirectional multidrop point to point link

IEC 61850-9-2

Communication networks and systems in substations - Part 9-2: Specific Communication Service Mapping (SCSM) - Sampled values over ISO/IEC 8802-3

IEC 61970-1

Energy management system application program interface (EMS-API) - Part 1: Guidelines and general requirements

IEC 62115

Electric toys - Safety

IEC 62271-100

High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers

IEC 62271-101

High-voltage switchgear and controlgear - Part 101: Synthetic testing

IEC 62271-102

High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches

IEC 62271-105

High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations

IEC 62271-107

High-voltage switchgear and controlgear - Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV

IEC 62271-108

High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above

IEC 62271-110

High-voltage switchgear and controlgear - Part 110: Inductive load switching

IEC 62271-111

High voltage switchgear and controlgear - Part 111: Overhead, pad-mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV

IEC 62271-200

High-voltage switchgear and controlgear - Part 200: A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV

IEC 62271-203

High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV

IEC/TR 61158-1

Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series

IEC/TR 61508-0

Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see <a href="http://www.iec.ch/functionalsafety">Functional Safety and IEC 61508</a>)

IEC/TR 61850-1

Communication networks and systems in substations - Part 1: Introduction and overview

IEC/TR 62263

Live working - Guidelines for the installation and maintenance of optical fibre cables on overhead power lines

IEC/TR 62271-301

High-voltage switchgear and controlgear - Part 301: Dimensional standardisation of high-voltage terminals

IEC/TR 62271-310

High-voltage switchgear and controlgear - Part 310: Electrical endurance testing for circuit-breakers above a rated voltage of 52 kV

IEC/TR 62354

General testing procedures for medical electrical equipment

IEC/TS 60076-14

Power transformers - Part 14: Design and application of liquid-immersed power transformers using high-temperature insulation materials

IEC/TS 61400-13

Wind turbine generator systems - Part 13: Measurement of mechanical loads

IEC/TS 61400-14

Wind turbines - Part 14: Declaration of apparent sound power level and tonality values

IEC/TS 61400-23

Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades

IEC/TS 61850-2

Communication networks and systems in substations - Part 2: Glossary

ISO/IEC 10192-1

Information technology - Home electronic system (HES) interfaces - Part 1: Universal Interface (UI) Class 1

ISO/IEC 10918-1

Information technology -- Digital compression and coding of continuous-tone still images: Requirements and guidelines

ISO/IEC 11172-3

Information technology -- Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s -- Part 3: Audio

ISO/IEC 11801

Information technology - Generic cabling for customer premises

ISO/IEC 12207

Systems and software engineering -- Software life cycle processes

ISO/IEC 13239

Information technology -- Telecommunications and information exchange between systems -- High-level data link control (HDLC) procedures

ISO/IEC 13818-3

Information technology -- Generic coding of moving pictures and associated audio information -- Part 3: Audio

ISO/IEC 14496-10

Information technology -- Coding of audio-visual objects -- Part 10: Advanced Video Coding

ISO/IEC 14496-11

Information technology -- Coding of audio-visual objects -- Part 11: Scene description and application engine

ISO/IEC 14709-1

Information technology - Configuration of Customer Premises Cabling (CPC) for applications - Part 1: Integrated Services Digital Network (ISDN) basic access

ISO/IEC 15476-4

Information technology -- CDIF semantic metamodel -- Part 4: Data models

ISO/IEC 18010

Information technology - Pathways and spaces for customer premises cabling

ISO/IEC 18028-3

Information technology -- Security techniques -- IT network security -- Part 3: Securing communications between networks using security gateways

ISO/IEC 20000-1

Information technology -- Service management -- Part 1: Specification

ISO/IEC 20000-2

Information technology -- Service management -- Part 2: Code of practice

ISO/IEC 21117

Information technology -- Office equipment -- Copying machines and Multi-function devices -- Information to be included in specification sheets and related test methods

ISO/IEC 9314-8

Information technology - Fibre Distributed Data Interface (FDDI) - Part 8: Media Access Control-2 (MAC-2)

ISO/IEC 9316

Information technology - Small Computer System Interface-2

ISO/IEC 9316-2

Information technology - Small computer system interface - 2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module