CISPR/TR 30

Test method on electromagnetic emissions from elecronic ballasts for single- and double-capped fluorescent lamps

IEC 60034-12

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors

IEC 60034-2-1

Rotating electrical machines - Part 2-1:Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles)

IEC 60034-26

Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors

IEC 60050-300

International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument

IEC 60050-441

International Electrotechnical Vocabulary. Switchgear, controlgear and fuses

IEC 60050-461

International Electrotechnical Vocabulary - Part 461: Electric cables

IEC 60050-471

International Electrotechnical Vocabulary - Part 471: Insulators

IEC 60050-482

International Electrotechnical Vocabulary - Part 482: Primary and secondary cells and batteries

IEC 60051-1

Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

IEC 60060-1

High-voltage test techniques - Part 1: General definitions and test requirements

IEC 60068-2-75

Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

IEC 60071-1

Insulation co-ordination - Part 1: Definitions, principles and rules

IEC 60072-1

Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080

IEC 60072-3

Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

IEC 60086-1

Primary batteries - Part 1: General

IEC 60086-2

Primary batteries - Part 2: Physical and electrical specifications

IEC 60086-3

Primary batteries - Part 3: Watch batteries

IEC 60086-4

Primary batteries - Part 4: Safety of lithium batteries

IEC 60095-1

Lead-acid starter batteries - Part 1: General requirements and methods of test

IEC 60095-4

Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles

IEC 60112

Method for the determination of the proof and the comparative tracking indices of solid insulating materials

IEC 60120

Dimensions of ball and socket couplings of string insulator units

IEC 60141-1

Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV

IEC 60141-2

Tests on oil-filled and gas-pressure cables and their accessories. Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV

IEC 60141-3

Tests on oil-filled and gas-pressure cables and their accessories. Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV

IEC 60141-4

Tests on oil-filled and gas-pressure cables and their accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV

IEC 60146-1-1

Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements

IEC 60146-2

Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters

IEC 60168

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

IEC 60227-1

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60227-2

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods

IEC 60227-3

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring

IEC 60227-4

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring

IEC 60227-5

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. - Part 5: Flexible cables (cords)

IEC 60227-6

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections

IEC 60227-7

Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors

IEC 60228

Conductors of insulated cables

IEC 60238

Edison screw lampholders

IEC 60245-1

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements

IEC 60245-4

Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables

IEC 60270

High-voltage test techniques - Partial discharge measurements

IEC 60273

Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V

IEC 60305

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type

IEC 60305

Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type

IEC 60309-1

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

IEC 60311

Electric irons for household or similar use - Methods for measuring performance

IEC 60320-1

Appliance couplers for household and similar general purposes - Part 1: General requirements

IEC 60335-1

Household and similar electrical appliances - Safety - Part 1: General requirements

IEC 60335-2-12

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances

IEC 60335-2-14

Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines

IEC 60335-2-21

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters

IEC 60335-2-24

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers

IEC 60335-2-25

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens

IEC 60335-2-3

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons

IEC 60335-2-34

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors

IEC 60335-2-35

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters

IEC 60335-2-58

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

IEC 60335-2-6

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances

IEC 60335-2-7

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines

IEC 60335-2-78

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues

IEC 60335-2-80

Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans

IEC 60335-2-9

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances

IEC 60364-1

Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions

IEC 60364-4-41

Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock

IEC 60364-7-712

Electrical installations of buildings - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems

IEC 60372

Locking devices for ball and socket couplings of string insulator units - Dimensions and tests

IEC 60381-1

Analogue signals for process control systems. Part 1: Direct current signals

IEC 60383-1

Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria

IEC 60383-2

Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

IEC 60410

Sampling plans and procedures for inspection by attributes

IEC 60433

Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type

IEC 60437

Radio interference test on high-voltage insulators

IEC 60442

Electric toasters for household and similar purposes - Methods for measuring the performance

IEC 60456

Clothes washing machines for household use - Methods for measuring the performance

IEC 60471

Dimensions of clevis and tongue couplings of string insulator units

IEC 60502-1

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

IEC 60502-2

Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 60507

Artificial pollution tests on high-voltage insulators to be used on a.c. systems

IEC 60507

Artificial pollution tests on high-voltage insulators to be used on a.c. systems

IEC 60508

Methods for measuring the performance of electric ironing machines for household and similar purposes

IEC 60529

Degrees of protection provided by enclosures (IP Code)

IEC 60529

Degrees of protection provided by enclosures (IP Code)

IEC 60587

Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion

IEC 60622

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells

IEC 60623

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Vented nickel-cadmium prismatic rechargeable single cells

IEC 60660

Insulators - Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 000 V up to but not including 300 kV

IEC 60665

A.C. electric ventilating fans and regulators for household and similar purposes

IEC 60669-1

Switches for household and similar fixed-electrical installations - Part 1: General requirements

IEC 60669-2-1

Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches

IEC 60670-1

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements

IEC 60672-1

Ceramic and glass insulating materials - Part 1: Definitions and classification

IEC 60672-3

Ceramic and glass-insulating materials - Part 3: Specifications for individual materials

IEC 60695-11-10

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

IEC 60695-2-10

Fire Hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

IEC 60695-2-11

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products

IEC 60695-2-11

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products

IEC 60695-2-11

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products

IEC 60695-2-12

Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

IEC 60695-2-13

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

IEC 60702-1

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables

IEC 60702-2

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations

IEC 60719

Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V

IEC 60720

Characteristics of line post insulators

IEC 60724

Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

IEC 60730-1

Automatic electrical controls for household and similar use - Part 1: General requirements

IEC 60730-2-10

Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays

IEC 60730-2-11

Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators

IEC 60811-1-1

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties

IEC 60811-1-2

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods

IEC 60811-1-3

Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density - Water absorption tests - Shrinkage test

IEC 60811-1-4

Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature

IEC 60811-3-1

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section One: Pressure test at high temperature - Tests for resistance to cracking

IEC 60811-3-2

Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section Two: Loss of mass test - Thermal stability test

IEC 60838-2-2

Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

IEC 60884-1

Plugs and socket-outlets for household and similar purposes - Part 1: General requirements

IEC 60884-2-1

Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs

IEC 60884-2-2

Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances

IEC 60884-2-3

Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations

IEC 60884-2-5

Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors

IEC 60884-2-6

Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations

IEC 60889

Hard-drawn aluminium wire for overhead line conductors

IEC 60891

Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics

IEC 60896-11

Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests

IEC 60896-21

Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test

IEC 60898-1

Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation

IEC 60898-2

Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation

IEC 60904-1

Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics

IEC 60904-10

Photovoltaic devices - Part 10: Methods of linearity measurement

IEC 60904-2

Photovoltaic devices - Part 2: Requirements for reference solar devices

IEC 60904-3

Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data

IEC 60904-5

Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method

IEC 60904-7

Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices

IEC 60904-8

Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device

IEC 60904-9

Photovoltaic devices - Part 9: Solar simulator performance requirements

IEC 60906-1

IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.

IEC 60929

AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

IEC 60947-3

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

IEC 60968

Self-ballasted lamps for general lighting services - Safety requirements

IEC 61000-4-17

Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test

IEC 61000-4-29

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

IEC 61000-4-4

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

IEC 61008-1

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules

IEC 61009-1

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules

IEC 61009-2-1

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage

IEC 61009-2-2

Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-2: Applicability of the general rules to RCBO's functionally dependent on line voltage

IEC 61032

Protection of persons and equipment by enclosures - Probes for verification

IEC 61056-1

General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics - Methods of test

IEC 61083-1

Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments

IEC 61138

Cables for portable earthing and short-circuiting equipment

IEC 61184

Bayonet lampholders

IEC 61194

Characteristic parameters of stand-alone photovoltaic (PV) systems

IEC 61211

Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air

IEC 61215

Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval

IEC 61338-1

Waveguide type dielectric resonators - Part 1: Generic specification

IEC 61338-1-3

Waveguide type dielectric resonators - Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency

IEC 61338-4

Waveguide type dielectric resonators - Part 4: Sectional specification

IEC 61345

UV test for photovoltaic (PV) modules

IEC 61347-2-13

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

IEC 61427

Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test

IEC 61439-1

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

IEC 61442

Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)

IEC 61462

Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations

IEC 61540

Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

IEC 61558-1

Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests

IEC 61558-2-4

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers

IEC 61558-2-6

Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers

IEC 61643-1

Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests

IEC 61646

Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval

IEC 61683

Photovoltaic systems - Power conditioners - Procedure for measuring efficiency

IEC 61701

Salt mist corrosion testing of photovoltaic (PV) modules

IEC 61702

Rating of direct coupled photovoltaic (PV) pumping systems

IEC 61724

Photovoltaic system performance monitoring - Guidelines for measurement, data exchange and analysis

IEC 61727

Photovoltaic (PV) systems - Characteristics of the utility interface

IEC 61730-1

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

IEC 61730-2

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

IEC 61800-1

Adjustable speed electrical power drive systems - Part 1: General requirments - Rating specifications for low voltage adjustables speed d.c. power drive systems

IEC 61829

Crystalline silicon photovoltaic (PV) array - On-site measurement of I-V characteristics

IEC 61951-1

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium

IEC 61951-2

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride

IEC 61959

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries

IEC 61960

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

IEC 61960

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications

IEC 62002-1

Mobile and portable DVB-T/H radio access - Part 1: Interface specification

IEC 62002-2

Mobile and portable DVB-T/H radio access - Part 2: Interface conformance testing

IEC 62031

LED modules for general lighting - Safety specifications

IEC 62040-3

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

IEC 62052-11

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

IEC 62052-11

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment

IEC 62052-21

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment

IEC 62053-11

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)

IEC 62053-21

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

IEC 62053-21

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)

IEC 62053-22

Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)

IEC 62053-23

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)

IEC 62053-31

Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)

IEC 62053-52

Electricity metering equipment (AC) - Particular requirements - Part 52: Symbols

IEC 62053-61

Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power consumption and voltage requirements

IEC 62054-11

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers

IEC 62054-21

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches

IEC 62055-31

Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)

IEC 62055-41

Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) - Application layer protocol for one-way token carrier systems

IEC 62055-51

Electricity metering - Payment systems - Part 51: Standard transfer specification (STS) - Physical layer protocol for one-way numeric and magnetic card token carriers

IEC 62055-52

Electricity metering - Payment systems - Part 52: Standard transfer specification (STS) - Physical layer protocol for a two-way virtual token carrier for direct local connection

IEC 62056-21

Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange

IEC 62056-31

Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling

IEC 62056-42

Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange

IEC 62056-46

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol

IEC 62056-47

Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks

IEC 62056-53

Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer

IEC 62056-62

Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes

IEC 62058-11

Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods

IEC 62058-21

Electricity metering equipment (AC) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2)

IEC 62058-31

Electricity metering equipment (AC) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2)

IEC 62059-31-1

Electricity metering equipment - Dependability - Part 31-1: Accelerated reliability testing - Elevated temperature and humidity

IEC 62059-41

Electricity metering equipment - Dependability - Part 41: Reliability prediction

IEC 62093

Balance-of-system components for photovoltaic systems - Design qualification natural environments

IEC 62124

Photovoltaic (PV) stand alone systems - Design verification

IEC 62133

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

IEC 62155

Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V

IEC 62209-1

Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)

IEC 62259

Secondary cells and batteries containing alkaline or other non-acid electrolytes - Nickel-cadmium prismatic secondary single cells with partial gas recombination

IEC 62271-100

High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers

IEC 62305-1

Protection against lightning - Part 1: General principles

IEC 62305-1

Protection against lightning - Part 1: General principles

IEC 62384

DC or AC supplied electronic control gear for LED modules - Performance requirements

IEC 62552

Household refrigerating appliances - Characteristics and test methods

IEC/TR 60083

Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC

IEC/TR 60755

General requirements for residual current operated protective devices

IEC/TR 60797

Residual strength of string insulator units of glass or ceramic material for overhead lines after mechanical damage of the dielectric

IEC/TR 60887

Glass bulb designation system for lamps

IEC/TR 61592

Household electrical appliances - Guidelines for consumer panel testing

IEC/TR 61923

Household electrical appliances - Method of measuring performance - Assessment of repeatability and reproducibility

IEC/TR 62051-1

Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM

IEC/TR 62059-21

Electricity metering equipment - Dependability - Part 21: Collection of meter dependability data from the field

IEC/TS 60034-17

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

IEC/TS 60034-25

Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply

IEC/TS 60865-2

Short-circuit currents - Calculation of effects - Part 2: Examples of calculation

IEC/TS 61245

Artificial pollution tests on high-voltage insulators to be used on d.c. systems

IEC/TS 61463

Bushings - Seismic qualification

IEC/TS 61836

Solar photovoltaic energy systems - Terms, definitions and symbols

IEC/TS 62257-7-1

Recommendations for small renewable energy and hybrid systems for rural electrification - Part 7-1: Generators - Photovoltaic generators