International Standards and Conformity Assessment for all electrical, electronic and related technologies

TC 46

Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories

 
export to xls file

TC 46 Working Documents since 2014-07-28

sort upsort down
Reference, Title
Downloads
sort down

Circulation

Date

sort upsort down

Closing

Date

sort upsort down
CENELEC

Voting /

Comment

Comit?s

Authoris?s

46/561/RVD

Report of Voting on 46/555/FDIS - IEC 61935-2-24/Ed 1.0GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7A - Blank detail specification
2015-07-17no
46/562/RVD

Report of Voting on 46/556/FDIS - IEC 61935-2-23/Ed 1.0: GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7 - Blank detail specification
2015-07-17no
46/560/RVC

Result of voting on 46/533/CDV - IEC 62153-4-10 Ed. 2.0 IEC 62153-4-10 Ed.2: Metallic communication cable tes methods - Part 4-10: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets - Double coaxial test method
2015-06-19no
46/559/DA

Draft agenda for the meeting to be held in Helsinki, Finland on 6 November 2015, starting time is late-morning and approximate finishing time of 3:00 pm.
2015-06-12
46/552A/RVC

Revised compilation of comments on 46/532/CDV - IEC 61935-1 Ed. 4.0 : Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards
2015-05-29no
46/558/AC

Next meeting of TC46 and its SCs to be held in Helsinki, Finland from 2 to 6 November 2015.(Announcement)
2015-05-08
46/557/RQ

Result of questionnaire 46/548A/Q - Nomination of a chair for SC 46F: R.F. and microwave passive components
2015-05-01
46/555/FDIS

IEC 61935-2-24/Ed 1.0GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - Part 2-24: Cord and work area cord category 7A - Blank detail specification
2015-04-242015-06-26noVoting Result
46/556/FDIS

IEC 61935-2-23/Ed 1.0: GENERIC CABLING SYSTEMS - SPECIFICATION FOR THE TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7 - Blank detail specification
2015-04-242015-06-26noVoting Result
46/552/RVC

Compilation of comments on 46/532/CDV - IEC 61935-1 Ed. 4.0 : Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards
2015-04-17no
46/553/RVC

Result of voting on 46/491/CDV - IEC 62153-4-7 Ed.2: Metallic Communication Cable Test Methods -Part 4-7 - Electromagnetic compatibility (EMC) - Test method for transfer impedance ZT and screening attenuation aS or coupling attenuation aC on connectors and assemblies up to and above 3 GHz - Tube in tube method
2015-04-17yes
46/554/RVD

Report of Voting on 46/545/FDIS - IEC 62153-4-4 Ed. 2: Metallic communication cable test methods - Part 4 - 4: Electro Magnetic Compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
2015-04-17no
46/551/FDIS

EC 61726/Ed.3:Cable assemblies, Cables, Connectors and Passive Microwave Components - SCREENING ATTENUATION MEASUREMENT BY THE REVERBERATION CHAMBER METHOD
2015-03-272015-05-29yesVoting Result
46/548A/Q

Nomination of a chair for SC 46F: R.F. and microwave passive components
2015-03-062015-04-10Report of Comments
46/550/RQ

Result of Questionnaire on 46/537/Q: Appointment of a new TC 46 representative for the Advisory Committee on EMC (ACEC)
2015-03-06
46/547/RR

Review report on IEC 62153-4-6/Ed1: Metallic Communication Cable test methods ? Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method
2015-02-27no
46/548/Q

Nomination of a chairman for SC 46F: R.F. and microwave passive components
2015-02-27
46/549/CD

IEC 62153-4-6/Ed.2: Metallic Communication Cable test methods ? Part 4-6: Electromagnetic compatibility (EMC) - Surface transfer impedance - line injection method
2015-02-272015-05-29noReport of Comments
46/546/NP

TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1-2: Installed Cabling - Additional requirements for measurment of resistance unbalance with field test instrumentation.
2015-02-132015-05-15?Voting Result
46/540/RVC

Result of voting on 46/513/CDV - IEC 61935-2-21 Ed. 1.0 : Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 -Part 2-21: Cord and work area cord category 6 Blank detail specification
2015-02-06no
46/541/RVC

Result of voting on 45/519/CDV - IEC 61935-2-22/Ed 1.0: Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 -Part 2-22: Cord and work area cord category 6A Blank detail specification
2015-02-06no
46/542/RVC

Result of voting on 46/514/CDV - IEC 61935-2-23 Ed. 1.0 : Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7- Blank detail specification
2015-02-06no
46/543/RVC

Result of voting on 46/515/CDV - IEC 61935-2-24 Ed. 1.: Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 -Part 2-24: Cord and work area cord category 7A Blank detail specification
2015-02-06no
46/544/RVC

Result of voting on 46/518/CDV - IEC 61935-2-25- Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 -Part 2-25: Work area with M12 4 poles connectors Blank detail specification
2015-02-06no
46/545/FDIS

IEC 62153-4-4 Ed. 2: Metallic communication cable test methods - Part 4 - 4: Electro Magnetic Compatibility (EMC) - Test method for measuring of the screening attenuation as up to and above 3 GHz, triaxial method
2015-02-062015-04-10noVoting Result
46/538/NP

METALLIC COMMUNICATION CABLE TEST METHODS - Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
2014-12-192015-03-20?Voting Result
46/533/CDV

IEC 62153-4-10 Ed.2: Metallic communication cable tes methods - Part 4-10: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets - Double coaxial test method
2014-12-122015-03-13noVoting Result
46/536/NP

IEC 62153-4-17: Metallic communication cable test methods - Part 4-17: Electro Magnetic Compatibility (EMC) - Reduction factor test method
2014-12-122015-03-13?Voting Result
46/537/Q

Appointment of a new TC 46 representative for the Advisory Committee on EMC (ACEC)
2014-12-122015-01-30Report of Comments
46/532/CDV

IEC 61935-1 Ed.4: Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards
2014-12-052015-03-06noVoting Result
46/521A/CDV

IEC 60966-2-4: Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
2014-11-072014-12-12yesVoting Result
46/523A/CDV

IEC 60966-2-5/Ed4:Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
2014-11-072014-12-12yesVoting Result
46/526/CDV

IEC 60966-2-6: Cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
2014-10-172015-01-23yesVoting Result
46/534/RVC

Voting result on 46/511/DTR: IEC 62153-4-16 TR Ed.1: Metallic communication cable test methods - Part 4-16: Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
2014-10-17no
46/535/RVC

Voting result on 46/510/CDV: IEC 62153-4-15 Ed.1: Metallic Communication Cable test methods - Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with Triaxial Cell
2014-10-17no
46/462A/RVC

Revised result of voting on 46/440/CDV - IEC 61726 Ed. 3: Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method
2014-10-10yes
46/530/FDIS

IEC 60966-2-7 Ed.1: Radio frequency and coaxial cable asemblies - Part 2-7: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-47 connectors
2014-09-262014-11-28yesVoting Result
46/531/CC

Compilation of comments on 46/507/CD: IEC 61935-1 Ed.4: Testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling as specified in ISO/IEC 11801 and related standards
2014-09-26no
46/529/CC

Compilation of comments on 46/494/CD - IEC 62153-4-10 Ed2:METALLIC COMMUNICATION CABLE TEST METHODS - Part 4-10: Electromagnetic compatibility (EMC) - Shielded screening attenuation test method for measuring the screening effectiveness of feed-throughs and electromagnetic gaskets double coaxial method
2014-09-19no
46/518/CDV

IEC 61935-2-25- Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 -Part 2-25: Work area with M12 4 poles connectors Blank detail specification
2014-09-122014-12-12noVoting Result
46/519/CDV

IEC 61935-2-22/Ed 1.0: Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 -Part 2-22: Cord and work area cord category 6A Blank detail specification
2014-09-122014-12-12noVoting Result
46/521/CDV

IEC 60966-2-4 CABLE ASSEMBLIES - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors
2014-09-12yes
46/523/CDV

IEC 60966-2-5 CABLE ASSEMBLIES - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
2014-09-12yes
46/513/CDV

IEC 61935-2-21/Ed 1.0: Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 -Part 2-21: Cord and work area cord category 6 Blank detail specification
2014-09-052014-12-05noVoting Result
46/514/CDV

IEC 61935-2-23 ed 1.0: Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2-23: Cord and work area cord category 7- Blank detail specification
2014-09-052014-12-05noVoting Result
46/515/CDV

IEC 61935-2-24/Ed 1.0: Generic cabling systems - Specification for the testing of balanced communicationcabling in accordance with ISO/IEC 11801 -Part 2-24: Cord and work area cord category 7A Blank detail specification
2014-09-052014-12-05noVoting Result
46/528/RVC

Result of voting on 46/496/DTR - IEC/TR 62839-1 Ed. 1.0 IEC /TR 62839-1 Environmental declaration:Part 1: wires and cables and accessories products specific rules
2014-09-05no
46/527/NP

TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 Part 1-1: Installed Cabling - Additional requirements for measurment of transverse conversion loss with field test instrumentation.
2014-08-222014-11-28?Voting Result
46/525/CC

Compilation of comments on 46/489/CD - IEC 60966-2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors
2014-08-08yes