IEC 61280-2-12 Ed. 1.0  

Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment

IEC 61280-4-2 Ed. 2.0  

Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant- Single-mode attenuation and optical return loss measurement

IEC 61290-10-5 Ed. 1.0  

Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure

IEC 61290-3-3 Ed. 1.0  

Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio

IEC 61290-4-3 Ed. 1.0  

Optical amplifiers - Test methods - Part 4-3: Power transient parameters in single channel optical fibre amplifiers for receivers

IEC 62007-1 Ed. 3.0  

Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics

IEC 62148-15 Ed. 2.0  

Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages

IEC 62148-17 Ed. 1.0  

Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors

IEC 62149-2 Ed. 2.0  

Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

IEC 62149-3 Ed. 2.0  

Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems

IEC 62149-8 Ed. 1.0  

Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices

IEC 62149-9 Ed. 1.0  

Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers

IEC 62343-2 Ed. 2.0  

Dynamic modules - Part 2: Reliability qualification

IEC 62343-3-3 Ed. 1.0  

Dynamic modules - Performance specification templates - Part 3-3: Wavelength selective switches

IEC 62572-3 Ed. 2.0  

Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication

IEC/TR 61282-4 Ed. 2.0  

Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects

IEC/TR 61292-4 Ed. 3.0  

Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers

IEC/TR 61292-9 Ed. 1.0  

Optical amplifiers - Part 9: Semiconductor optical amplifiers

IEC/TR 62343-6-2 Ed. 2.0  

Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results

IEC/TR 62572-4 Ed. 1.0  

Fibre optic active components and devices - Reliability - Part 4: Guideline for optical connector end-face cleaning methods for receptacle style optical transceivers

PNW 86C-1096 Ed. 1.0  

Future IEC 61757-2: Fibre optic sensors - Strain Measurement - Part 2 Fibre Bragg Gratings

PNW 86C-1120 Ed. 1.0  

Future IEC 61290-1/Ed1: Optical amplifiers - Test Methods - Part 1: Optical power and gain parameters

PNW 86c-1122 Ed. 1.0  

Future IEC 62148-18/Ed1: Fiber optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface

PWI 86C-1 Ed. 1.0  

IEC 61280-2-9/Ed3: Fibre optic communication subsystem test procedures - Part 2-9: Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

PWI 86C-10 Ed. 1.0  

Future IEC 62343-3-2/Ed1: Dynamic modules - Performance specification templates - Part 3-2: Optical channel monitor

PWI 86C-11 Ed. 1.0  

Future IEC 62343-4-1/Ed1: Dynamic modules - Hardware and Software Interface of WSS

PWI 86C-12 Ed. 1.0  

Future IEC 62343-5-2/Ed1: Dynamic modules - test methods - Part 5-2 : transient crosstalk measurement for wavelength selective switch (WSS)

PWI 86C-13 Ed. 1.0  

Future IEC 61282-12/TR/Ed1: Fibre optic communication system design guides - Part 12: In-Band OSNR

PWI 86C-14 Ed. 1.0  

Future IEC 61282-13/TR/Ed1: Fibre optic communication system design guides - Part 13: In- service analysis

PWI 86C-16 Ed. 1.0  

Future IEC 61292-8/TR/Ed1: Optical amplifiers - Part 8: High power amplifiers

PWI 86C-18 Ed. 1.0  

IEC 62343-6-5/TR/Ed2: Dynamic modules - Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules

PWI 86C-4 Ed. 1.0  

IEC 61291-5-2/Ed 2: Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers

PWI 86C-5 Ed. 1.0  

Future IEC 61757-3/Ed1: Fibre optic sensors - Distributed temperature sensing

PWI 86C-6 Ed. 1.0  

IEC 62150-3/Ed2: Fibre optic active components and devices - Basic test and measurement procedures -Optical power variation induced by mechanical disturbance in optical connectors and transceiver Interfaces

PWI 86C-7 Ed. 1.0  

IEC 62343-1-2/Ed2: Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Categorgy C)

PWI 86C-8 Ed. 1.0  

Future IEC 62343-1-4/Ed1: Dynamic modules - Part 1-4 Performance standards - Operating conditions