International
Electrotechnical
Commission
International Standards and Conformity Assessment
for all electrical, electronic and related technologies
SC 86C |
Systèmes et dispositifs actifs à fibres optiques |
SC 86C Programme de Travail
 Référence Projet |  Stage | Référence Document | Init. Date | Stage Courant | Prochain Stage | Mod | Fcst. Publ. Date |
|---|---|---|---|---|---|---|---|
IEC 61280-1-1 Ed. 2.0 Procédures d'essai de base des sous-systèmes de télécommunication à fibres optiques - Partie 1-1: Procédures d'essai des sous-systèmes généraux de télécommunication - Mesure de la puissance optique des émetteurs couplés à des câbles à fibres optiques unimodales | APUB
| 86C/1098/RVC | 2011-05 | 2013-01 | 2013-02 | no | 2013-07 |
IEC 61280-2-12 Ed. 1.0 Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment | 1CD
| 86C/1100/CD | 2012-03 | 2013-01 | 2013-04 | no | 2014-05 |
IEC 61280-2-9 Ed. 3.0 Fibre optic communication subsystem test procedures - Part 2-9: Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems | PWI
| 2010-10 | no | ||||
IEC 61280-4-2 Ed. 2.0 Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant- Single-mode attenuation and optical return loss measurement | ACDV
| 86C/1103/CC | 2010-12 | 2012-12 | 2013-01 | no | 2014-05 |
IEC 61280-4-4 Ed. 2.0 Fibre-optic communication subsystem test procedures - Part 4-4: Polarization mode dispersion measurement for installed links | PWI
| 2010-10 | no | ||||
IEC 61290-1-1 Ed. 3.0 Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method | PWI
| 2012-11 | no | ||||
IEC 61290-10-5 Ed. 1.0 Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure | 1CD
| 86C/1108/CD | 2012-07 | 2013-01 | 2013-04 | no | 2014-05 |
IEC 61290-3-3 Ed. 1.0 Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio | ACDV
| 86C/1067A/CC | 2012-02 | 2013-01 | 2013-01 | no | 2014-05 |
IEC 61290-4-3 Ed. 1.0 Optical amplifiers - Test methods - Part 4-3: Power transient parameters in single channel optical fibre amplifiers for receivers | ANW
| 86C/1089/RVN | 2012-09 | 2012-09 | 2012-12 | no | |
IEC 61291-5-2 Ed. 2.0 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers | PWI
| 2011-10 | no | ||||
IEC 61757-3 Ed. 1.0 Fibre optic sensors - Distributed temperature sensing | PWI
| 2012-11 | no | ||||
IEC 62007-1 Ed. 3.0 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics | 1CD
| 86C/1111/CD | 2013-01 | 2013-01 | 2013-04 | no | 2013-04 |
IEC 62148-15 Ed. 2.0 Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages | 1CD
| 86C/1107/CD | 2013-01 | 2013-01 | 2013-04 | no | 2014-04 |
IEC 62148-17 Ed. 1.0 Composants et dispositifs actifs à fibres optiques - Normes de boitiers et d'interface - Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux RF doubles | CCDV
| 86C/1078/CDV | 2011-04 | 2012-07 | 2013-01 | no | 2013-09 |
IEC 62149-2 Ed. 2.0 Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices | 1CD
| 86C/1105/CD | 2012-12 | 2013-01 | 2013-04 | no | 2014-04 |
IEC 62149-3 Ed. 2.0 Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems | 1CD
| 86C/1116/CD | 2013-01 | 2013-01 | 2013-05 | no | 2014-11 |
IEC 62149-8 Ed. 1.0 Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices | 1CD
| 86C/1101/CD | 2012-10 | 2013-01 | 2013-04 | no | 2014-05 |
IEC 62149-9 Ed. 1.0 Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers | 1CD
| 86C/1102/CD | 2012-10 | 2013-01 | 2013-04 | no | 2014-05 |
IEC 62150-3 Ed. 2.0 Fibre optic active components and devices - Basic test and measurement procedures -Optical power variation induced by mechanical disturbance in optical connectors and transceiver Interfaces | PWI
| 2012-11 | no | ||||
IEC 62343 Ed. 1.0 Dispositifs et modules dynamiques - Generalites et guide | APUB
| 86C/1088/RVC | 2009-11 | 2012-09 | 2013-01 | no | 2013-06 |
IEC 62343-1-2 Ed. 2.0 Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Categorgy C)
| PWI
| 2011-10 | no | ||||
IEC 62343-1-4 Ed. 1.0 Dynamic modules - Part 1-4 Performance standards - Operating conditions | PWI
| 2012-11 | no | ||||
IEC 62343-2 Ed. 2.0 Dynamic modules - Part 2: Reliability qualification | PWI
| 2012-11 | no | ||||
IEC 62343-3-2 Ed. 1.0 Dynamic modules - Performance specification templates - Part 3-2: Optical channel monitor | PWI
| 2012-11 | no | ||||
IEC 62343-3-3 Ed. 1.0 Dynamic modules - Performance specification templates - Part 3-3: Wavelength selective switches | 1CD
| 86C/1099/CD | 2012-10 | 2013-01 | 2013-04 | no | 2014-05 |
IEC 62343-4-1 Ed. 1.0 Dynamic modules - Hardware and Software Interface of WSS | PWI
| 2012-11 | no | ||||
IEC 62343-5-2 Ed. 1.0 Dynamic modules - test methods - Part 5-2 : transient crosstalk measurement for wavelength selective switch (WSS) | PWI
| 2012-11 | no | ||||
IEC 62572-3 Ed. 2.0 Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication | 1CD
| 86C/1113/CD | 2013-01 | 2013-01 | 2013-04 | no | 2014-04 |
IEC/TR 61282-12 Ed. 1.0 Fibre optic communication system design guides - Part 12: In-Band OSNR | PWI
| 2011-11 | no | ||||
IEC/TR 61282-13 Ed. 1.0 Fibre optic communication system design guides - Part 13: In- service analysis | PWI
| 2012-11 | no | ||||
IEC/TR 61282-4 Ed. 2.0 Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects | PWI
| 2012-11 | no | ||||
IEC/TR 61292-8 Ed. 1.0 Optical amplifiers - Part 8: High power amplifiers | PWI
| 2012-11 | no | ||||
IEC/TR 61292-9 Ed. 1.0 Optical amplifiers - Part 9: Semiconductor optical amplifiers | 1CD
| 86C/1109/CD | 2013-01 | 2013-01 | 2013-04 | no | 2013-12 |
IEC/TR 62343-6-2 Ed. 2.0 Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results | PWI
| 2012-11 | no | ||||
IEC/TR 62343-6-5 Ed. 2.0 Dynamic modules - Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules | PWI
| 2012-11 | no | ||||
PNW 86C-1096 Ed. 1.0 Fibre optic sensors - Strain Measurement - Part 2 Fibre Bragg Gratings | PNW
| 86C/1096/NP | 2012-11 | 2013-04 | no |
127 kB
118 kB