IEC 60068-2-42

Edition 3.0 (2003-05-22)

Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections

Stability Date: 2015

IEC 60068-2-42

Edition 3.0 (2003-05-22)

Versión Oficial En español - Ensayos ambientales. Parte 2-42: Ensayos. Ensayo Kc: Ensayo de dióxido de azufre para contactos y conexiones.

Stability Date: 2015

IEC 60068-2-43

Edition 2.0 (2003-05-23)

Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections

Stability Date: 2015

IEC 60068-2-43

Edition 2.0 (2003-05-23)

Versión Oficial En español - Ensayos ambientales. Parte 2-43 Ensayos. Ensayo Kd: Ensayo de sulfuro de hidrógeno para contactos y conexiones.

Stability Date: 2015

IEC 60068-2-46

Edition 1.0 (1982-01-01)

Environmental testing - Part 2: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections

Stability Date: 2015

IEC 60068-2-49

Edition 1.0 (1983-01-01)

Environmental testing - Part 2: Tests. Guidance to Test Kc: Sulphur dioxide test for contacts and connections

Stability Date: 2015

IEC 60130-2

Edition 2.0 (1965-01-01)

Connectors for frequencies below 3 MHz. Part 2: Connectors for radio receivers and associated sound equipment

Stability Date: 2015

IEC 60130-2-am1

Edition 2.0 (1969-01-01)

Amendment 1 - Connectors for frequencies below 3 MHz. Part 2: Connectors for radio receivers and associated sound equipment

Stability Date: 2015

IEC 60130-3

Edition 1.0 (1965-01-01)

Connectors for frequencies below 3 MHz. Part 3: Battery connectors

Stability Date: 2015

IEC 60130-3

Edition 1.0 (1993-01-01)

Corrigendum 1 - Connectors for frequencies below 3 MHz. Part 3: Battery connectors

Stability Date: 2015

IEC 60130-4

Edition 1.0 (1966-01-01)

Connectors for frequencies below 3 MHz. Part 4: Circular multipole connectors with threaded coupling

Stability Date: 2015

IEC 60130-5

Edition 1.0 (1966-01-01)

Connectors for frequencies below 3 MHz. Part 5: Rectangular multipole connectors with blade contacts

Stability Date: 2015

IEC 60130-6

Edition 1.0 (1965-01-01)

Connectors for frequencies below 3 MHz. Part 6: Rectangular miniature multipole connectors with blade contacts

Stability Date: 2015

IEC 60130-7

Edition 1.0 (1971-01-01)

Connectors for frequencies below 3 MHz. Part 7: Circular multipole connectors with bayonet or push-pull coupling

Stability Date: 2015

IEC 60130-8

Edition 2.0 (1976-01-01)

Connectors for frequencies below 3 MHz. Part 8: Concentric connectors for audio circuits in radio receivers

Stability Date: 2015

IEC 60130-9

Edition 4.0 (2011-02-23)

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment

Stability Date: 2015

IEC 60130-10

Edition 1.0 (1971-01-01)

Connectors for frequencies below 3 MHz. Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment

Stability Date: 2015

IEC 60130-12

Edition 2.0 (1976-01-01)

Connectors for frequencies below 3 MHz. Part 12: Link and test connectors

Stability Date: 2015

IEC 60130-16

Edition 1.0 (1976-01-01)

Connectors for frequencies below 3 MHz. Part 16: Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54 mm (0.1 in)

Stability Date: 2015

IEC 60130-17

Edition 1.0 (1998-02-12)

Connectors for frequencies below 3 MHz - Part 17: Detailspecification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries

Stability Date: 2015

IEC 60130-4A

Edition 1.0 (1970-01-01)

Connectors for frequencies below 3 MHz - Part 4: Circular multipole connectors with threaded coupling - First supplement

Stability Date: 2015

IEC 60352-1

Edition 3.0 (1997-08-06)

Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

Stability Date: 2017

IEC 60352-1

Edition 3.0 (1998-10-07)

Corrigendum 1 - Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance

Stability Date: 2017

IEC 60352-1

Edition 3.0 (1997-08-06)

Versión Oficial En español (Incluye corrigendum de octubre de 1998) Conexiones sin soldadura. Parte 1: Conexiones enrolladas. Requisitos generales, métodos de ensayo y guía práctica.

Stability Date: 2017

IEC 60352-2

Edition 2.0 (2006-02-23)

Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance

Stability Date: 2014

IEC 60352-3

Edition 1.0 (1993-02-08)

Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance

Stability Date: 2018

IEC 60352-3

Edition 1.0 (1995-11-01)

Corrigendum 1 - Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance

Stability Date: 2018

IEC 60352-3

Edition 1.0 (1993-02-08)

VERSION OFICIAL EN ESPANOL (Incluye corrigendum:1995) Conexiones sin soldadura. Parte 3: Conexiones accesibles sin soldadura con aislamiento separable. Requisitos generales, métodos de ensayo y guía práctica.

Stability Date: 2018

IEC 60352-4

Edition 1.0 (1994-09-22)

Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance

Stability Date: 2018

IEC 60352-4

Edition 1.0 (1994-09-22)

VERSION OFICIAL EN ESPANOL - Conexiones sin soldadura. Parte 4: Conexiones innaccesibles sin soldadura con aislamiento separable . Requisitos generales, métodos de ensayo y guía práctica.

Stability Date: 2018

IEC 60352-4-am1

Edition 1.0 (2000-07-31)

Amendment 1 - Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance

Stability Date: 2018

IEC 60352-4-am1

Edition 1.0 (2000-07-31)

VERSION OFICIAL EN ESPANOL - Modificación 1 - Conexiones sin soldadura. Parte 4: Conexiones inaccesibles sin soldadura con aislamiento separable. Requisitos generales, métodos de ensayo y guía práctica.

Stability Date: 2018

IEC 60352-5

Edition 4.0 (2012-02-22)

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance

Stability Date: 2015

IEC 60352-6

Edition 1.0 (1997-08-26)

Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance

Stability Date: 2018

IEC 60352-6

Edition 1.0 (1997-08-26)

Versión Oficial en Español - Conexiones sin soldadura. Parte 6: Conexiones por perforación del aislamiento. Requisitos generales, métodos de ensayo y guía práctica.

Stability Date: 2018

IEC 60352-7

Edition 1.0 (2002-08-14)

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

Stability Date: 2015

IEC 60352-7

Edition 1.0 (2002-08-14)

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance

Stability Date: 2015

IEC 60352-7

Edition 1.0 (2002-08-14)

Versión Oficial En español - Conexiones sin soldadura. Parte 7: Conexiones de resorte. Requisitos generales, métodos de ensayo y guía práctica.

Stability Date: 2015

IEC 60352-8

Edition 1.0 (2011-02-10)

Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance

Stability Date: 2015

IEC 60512-1

Edition 4.0 (2001-01-30)

Connectors for electronic equipment - Tests and measurements - Part 1: General

Stability Date: 2014

IEC 60512-1

Edition 4.0 (2001-01-30)

Versión Oficial en Español - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 1: Generalidades.

Stability Date: 2014

IEC 60512-1-1

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination

Stability Date: 2017

IEC 60512-1-1

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 1-1: Examen general. Ensayo 1a: Examen visual.

Stability Date: 2017

IEC 60512-1-2

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass

Stability Date: 2017

IEC 60512-1-2

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 1-2: Examen general. Ensayo 1b: Examen de dimensión y masa.

Stability Date: 2017

IEC 60512-1-3

Edition 1.0 (1997-07-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length

Stability Date: 2017

IEC 60512-1-3

Edition 1.0 (1997-07-01)

Versión oficial en español - Componentes electromecánicos para equipos electrónicos - Procedimientos básicos de ensayo y métodos de medida - Parte 1: Examen general - Sección 3: Ensayo 1c: Longitud de acoplamiento eléctrico

Stability Date: 2017

IEC 60512-1-4

Edition 1.0 (1997-07-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

Stability Date: 2017

IEC 60512-1-4

Edition 1.0 (2000-11-15)

Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)

Stability Date: 2017

IEC 60512-1-4

Edition 1.0 (1997-07-30)

Versión Oficial en Español - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 1: Generalidades. Sección 4: Ensayo 1d: Eficacia de la protección de los contactos (scoop-proof).

Stability Date: 2017

IEC 60512-1-100

Edition 3.0 (2012-02-22)

Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications

Stability Date: 2017

IEC 60512-1-100

Edition 3.0 (2012-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 1-100: Generalidades. Publicaciones aplicables.

Stability Date: 2017

IEC 60512-2-1

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method

Stability Date: 2017

IEC 60512-2-1

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 2-1: Ensayos de continuidad eléctrica y resistencia de contacto. Ensayo 2a: Resistencia de contacto. Método de nivel de milivoltios.

Stability Date: 2017

IEC 60512-2-2

Edition 1.0 (2003-05-16)

Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

Stability Date: 2017

IEC 60512-2-2

Edition 1.0 (2003-05-16)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 2-2: Ensayos de continuidad eléctrica y resistencia de contacto. Ensayo 2b. Resistencia de contacto. Método de corriente de ensayo especificada.

Stability Date: 2017

IEC 60512-2-3

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation

Stability Date: 2017

IEC 60512-2-3

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 2-3: Ensayos de continuidad eléctrica y de resistencia de contacto. Ensayo 2c: Variación de la resistencia de contacto.

Stability Date: 2017

IEC 60512-2-5

Edition 1.0 (2003-05-16)

Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance

Stability Date: 2017

IEC 60512-2-5

Edition 1.0 (2003-05-16)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 2-5: Ensayos de continuidad eléctrica y de resistencia de contacto. Ensayo 2e: Perturbación de contacto.

Stability Date: 2017

IEC 60512-2-6

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity

Stability Date: 2017

IEC 60512-2-6

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 2-6: Ensayos de continuidad eléctrica y de resistencia de contacto. Ensayo 2f: Continuidad eléctrica del alojamiento (cubierta).

Stability Date: 2017

IEC 60512-3-1

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance

Stability Date: 2017

IEC 60512-3-1

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 3-1: Ensayos de aislamiento. Ensayo 3a: Resistencia de aislamiento.

Stability Date: 2017

IEC 60512-4-1

Edition 1.0 (2003-05-16)

Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof

Stability Date: 2017

IEC 60512-4-1

Edition 1.0 (2003-05-16)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 4-1: Ensayos de esfuerzo dieléctrico. Ensayos 4a: Tensión de prueba.

Stability Date: 2017

IEC 60512-4-2

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge

Stability Date: 2017

IEC 60512-4-2

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 4-2: Ensayos de esfuerzo dieléctrico. Ensayos 4b: Descargas parciales.

Stability Date: 2017

IEC 60512-4-3

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels

Stability Date: 2017

IEC 60512-4-3

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 4-3: Ensayos de esfuerzo dieléctrico. Ensayos 4c: Tensión de prueba para los tambores engastados preaislados.

Stability Date: 2017

IEC 60512-5-1

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise

Stability Date: 2017

IEC 60512-5-1

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 5-1: Ensayos de corriente límite. Ensayo 5a: Calentamiento.

Stability Date: 2017

IEC 60512-5-2

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating

Stability Date: 2017

IEC 60512-5-2

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 5-2: Ensayos de corriente límite. Ensayo 5b: Tasa de reducción de la intensidad en función de la temperatura.

Stability Date: 2017

IEC 60512-6-1

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state

Stability Date: 2017

IEC 60512-6-1

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 6-1: Ensayos de esfuerzos dinámicos. Ensayo 6a: Aceleración constante.

Stability Date: 2017

IEC 60512-6-2

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump

Stability Date: 2017

IEC 60512-6-2

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 6-2: Ensayos de esfuerzos dinámicos. Ensayo 6b: Sacudida.

Stability Date: 2017

IEC 60512-6-3

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock

Stability Date: 2017

IEC 60512-6-3

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 6-3: Ensayos de esfuerzos dinámicos. Ensayo 6c: Choque.

Stability Date: 2017

IEC 60512-6-4

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)

Stability Date: 2017

IEC 60512-6-4

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 6-4: Ensayos de esfuerzos dinámicos. Ensayo 6d: Vibraciones (sinusoidales).

Stability Date: 2017

IEC 60512-6-5

Edition 1.0 (1997-10-01)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration

Stability Date: 2017

IEC 60512-6-5

Edition 1.0 (1997-10-01)

Versión Oficial en Español - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 6: Ensayos de esfuerzos dinámicos. Sección 5: Ensayo 6e: Vibraciones aleatorias.

Stability Date: 2017

IEC 60512-7-1

Edition 1.0 (2010-03-17)

Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

Stability Date: 2017

IEC 60512-7-2

Edition 1.0 (2011-11-17)

Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact

Stability Date: 2017

IEC 60512-8-1

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse

Stability Date: 2013

IEC 60512-8-2

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial

Stability Date: 2017

IEC 60512-8-3

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever

Stability Date: 2017

IEC 60512-9-1

Edition 1.0 (2010-03-17)

Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation

Stability Date: 2017

IEC 60512-9-2

Edition 1.0 (2011-11-28)

Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature

Stability Date: 2015

IEC 60512-9-3

Edition 2.0 (2011-06-22)

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load

Stability Date: 2017

IEC 60512-9-4

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)

Stability Date: 2017

IEC 60512-9-5

Edition 1.0 (2010-03-17)

Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic

Stability Date: 2017

IEC 60512-10-4

Edition 2.0 (2003-08-11)

Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)

Stability Date: 2017

IEC 60512-10-4

Edition 2.0 (2003-08-11)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayo y mediciones. Parte 10-4: Ensayos de impacto (componentes libres), ensayos de carga estática (componentes fijos), ensayos de endurancia y ensayos de sobrecarga. Ensayo 10d: Sobrecargas eléctricas (conectores).

Stability Date: 2017

IEC 60512-11-1

Edition 1.0 (1995-11-08)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence

Stability Date: 2017

IEC 60512-11-1

Edition 1.0 (1995-11-08)

Versión Oficial en Español - Componentes electromecánicos para equipos electrónicos. Procedimientos de ensayo básicos y métodos de medida. Parte 11: Ensayos climáticos. Sección 1: Ensayo 11a. Secuencia climática.

Stability Date: 2017

IEC 60512-11-2

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat

Stability Date: 2017

IEC 60512-11-2

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-2: Ensayos climáticos. Ensayo 11b: Ensayo combinado/secuencial de frío a baja presión atmosférica y calor húmedo.

Stability Date: 2017

IEC 60512-11-3

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state

Stability Date: 2017

IEC 60512-11-3

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-3: Ensayos climáticos. Ensayo 11c: Ensayo continuo de calor húmedo.

Stability Date: 2017

IEC 60512-11-4

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature

Stability Date: 2017

IEC 60512-11-4

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-4: Ensayos climáticos. Ensayo 11d: Variaciones rápidas de temperatura.

Stability Date: 2017

IEC 60512-11-5

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth

Stability Date: 2017

IEC 60512-11-5

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-5: Ensayos climáticos. Ensayo 11e: Crecimiento de hongos.

Stability Date: 2017

IEC 60512-11-6

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist

Stability Date: 2017

IEC 60512-11-6

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-6: Ensayos climáticos. Ensayo 11f: Corrosión, niebla salina.

Stability Date: 2017

IEC 60512-11-7

Edition 2.0 (2003-05-22)

Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test

Stability Date: 2017

IEC 60512-11-7

Edition 2.0 (2003-05-22)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayo y mediciones. Parte 11-7: Ensayos climáticos. Ensayo 11g: Ensayo de corrosión en un flujo de mezcla de gases.

Stability Date: 2017

IEC 60512-11-8

Edition 1.0 (1995-11-16)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust

Stability Date: 2017

IEC 60512-11-8

Edition 1.0 (1995-11-16)

Versión Oficial en Español - Componentes electromagnéticos para equipos electrónicos. Procedimientos de ensayo básico y métodos de medición. Parte 11: Ensayos climáticos. Sección 8: Ensayo 11a. Arena y polvo.

Stability Date: 2017

IEC 60512-11-9

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat

Stability Date: 2017

IEC 60512-11-9

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-9: Ensayos climáticos. Ensayo 11i: Calor seco

Stability Date: 2017

IEC 60512-11-10

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold

Stability Date: 2017

IEC 60512-11-10

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-10: Ensayos climáticos. Ensayo 11j: Frío.

Stability Date: 2017

IEC 60512-11-11

Edition 1.0 (2002-02-22)

Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure

Stability Date: 2017

IEC 60512-11-11

Edition 1.0 (2002-02-22)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-11: Ensayos climáticos. Ensayo 11k: Baja presión atmosférica.

Stability Date: 2017

IEC 60512-11-12

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic

Stability Date: 2017

IEC 60512-11-12

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-12: Ensayos climáticos. Ensayo 11m: Ensayo cíclico de calor húmedo.

Stability Date: 2017

IEC 60512-11-13

Edition 1.0 (2002-02-21)

Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections

Stability Date: 2017

IEC 60512-11-13

Edition 1.0 (2002-02-21)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-13: Ensayos climáticos. Ensayo 11n: Estanquidad frente a gases, conexiones arolladas sin soldadura.

Stability Date: 2017

IEC 60512-11-14

Edition 2.0 (2003-07-24)

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

Stability Date: 2017

IEC 60512-11-14

Edition 2.0 (2003-07-24)

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test

Stability Date: 2017

IEC 60512-11-14

Edition 2.0 (2003-07-24)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 11-14: Ensayos climáticos. Ensayo 11p: Ensayo de corrosión en el flujo de un único gas.

Stability Date: 2017

IEC 60512-12-1

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method

Stability Date: 2017

IEC 60512-12-1

Edition 1.0 (2006-03-23)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 12-1: Ensayos de soldadura. Ensayo 12a: Soldabilidad, mojado, método de baño de soldadura.

Stability Date: 2017

IEC 60512-12-2

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method

Stability Date: 2017

IEC 60512-12-2

Edition 1.0 (2006-02-13)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 12-2: Ensayos de soldadura. Ensayo 12b: Soldabilidad, mojado, método de soldador

Stability Date: 2017

IEC 60512-12-3

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting

Stability Date: 2017

IEC 60512-12-3

Edition 1.0 (2006-02-13)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 12-3: Ensayos de soldadura. Ensayo 12c: Soldabilidad, desmojado

Stability Date: 2017

IEC 60512-12-4

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method

Stability Date: 2017

IEC 60512-12-4

Edition 1.0 (2006-02-13)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 12-4: Ensayos de soldadura. Ensayo 12d: Resistencia al calor de soldadura, método del baño de soldadura

Stability Date: 2017

IEC 60512-12-5

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method

Stability Date: 2017

IEC 60512-12-5

Edition 1.0 (2006-02-13)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 12-5: Ensayos de soldadura. Ensayo 12e: Resistencia al calor de soldadura, método de soldadura en plancha

Stability Date: 2017

IEC 60512-12-6

Edition 1.0 (1996-01-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering

Stability Date: 2017

IEC 60512-12-6

Edition 1.0 (1996-01-30)

VERSION OFICIAL EN ESPANOL - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 12: Ensayos de soldadura. Sección 6: Ensayo 12f: Estanquidad al fundente y a los disolventes de limpieza en una máquina de soldar.

Stability Date: 2017

IEC 60512-12-7

Edition 1.0 (2001-01-24)

Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method

Stability Date: 2017

IEC 60512-12-7

Edition 1.0 (2001-01-24)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 12-7: Ensayos de soldadura. Ensayo 12G: Soldabilidad, método de equililbrio de humedecimiento.

Stability Date: 2017

IEC 60512-13-1

Edition 2.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces

Stability Date: 2017

IEC 60512-13-1

Edition 2.0 (2006-02-13)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 13-1: Ensayos de funcionamiento mecánico. Ensayo 13a: Fuerzas de acoplamiento y desacoplamiento

Stability Date: 2017

IEC 60512-13-2

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces

Stability Date: 2017

IEC 60512-13-2

Edition 1.0 (2006-02-13)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 13-2: Ensayos de funcionamiento mecánico. Ensayo 13b: Fuerzas de inserción y de extracción

Stability Date: 2017

IEC 60512-13-5

Edition 1.0 (2006-02-13)

Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method

Stability Date: 2017

IEC 60512-13-5

Edition 1.0 (2006-02-13)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 13-5: Ensayos de funcionamiento mecánico. Ensayo 13e: Método de polarización y codificación

Stability Date: 2017

IEC 60512-14-2

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage

Stability Date: 2017

IEC 60512-14-2

Edition 1.0 (2006-03-23)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 14-2: Ensayos de estanquidad. Ensayo 14b: Estanquidad. Microfugas de aire

Stability Date: 2017

IEC 60512-14-4

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof

Stability Date: 2017

IEC 60512-14-4

Edition 1.0 (2006-03-23)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 14-4: Ensayos de estanquidad. Ensayo 14d: Inmersión. Prueba de agua

Stability Date: 2017

IEC 60512-14-5

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure

Stability Date: 2017

IEC 60512-14-5

Edition 1.0 (2006-03-23)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 14-5: Ensayos de estanquidad. Ensayo 14e: Inmersión a baja presión atmosférica

Stability Date: 2017

IEC 60512-14-6

Edition 1.0 (2006-03-23)

Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

Stability Date: 2017

IEC 60512-14-6

Edition 1.0 (2006-03-23)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 14-6: Ensayos de estanquidad. Ensayo 14f: Estanquidad interfacial

Stability Date: 2017

IEC 60512-14-7

Edition 1.0 (1997-10-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water

Stability Date: 2017

IEC 60512-14-7

Edition 1.0 (1997-10-30)

Versión Oficial en Español - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 14: Ensayos de estanquidad. Sección 7: Ensayo 14g: Proyección de agua.

Stability Date: 2017

IEC 60512-15-1

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert

Stability Date: 2017

IEC 60512-15-2

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)

Stability Date: 2017

IEC 60512-15-3

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)

Stability Date: 2017

IEC 60512-15-4

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force

Stability Date: 2017

IEC 60512-15-5

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation

Stability Date: 2017

IEC 60512-15-6

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices

Stability Date: 2017

IEC 60512-15-7

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment

Stability Date: 2017

IEC 60512-15-8

Edition 1.0 (1995-11-16)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application

Stability Date: 2017

IEC 60512-15-8

Edition 1.0 (1995-11-16)

VERSION OFICIAL EN ESPANOL - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de mediciónParte 15: Ensayos mecánicos de los contactos y de los terminales. Sección 8: Ensayo 15h: Resistencia del sistema de retención de los contactos a

Stability Date: 2017

IEC 60512-16-1

Edition 1.0 (2008-06-11)

Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage

Stability Date: 2017

IEC 60512-16-2

Edition 1.0 (2008-06-11)

Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry

Stability Date: 2017

IEC 60512-16-3

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength

Stability Date: 2017

IEC 60512-16-4

Edition 1.0 (2008-06-11)

Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)

Stability Date: 2017

IEC 60512-16-5

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

Stability Date: 2017

IEC 60512-16-6

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations

Stability Date: 2017

IEC 60512-16-7

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping

Stability Date: 2017

IEC 60512-16-8

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)

Stability Date: 2017

IEC 60512-16-9

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

Stability Date: 2017

IEC 60512-16-11

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections

Stability Date: 2017

IEC 60512-16-13

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections

Stability Date: 2017

IEC 60512-16-14

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs

Stability Date: 2017

IEC 60512-16-16

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs

Stability Date: 2017

IEC 60512-16-17

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs

Stability Date: 2017

IEC 60512-16-18

Edition 1.0 (2008-05-14)

Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation

Stability Date: 2017

IEC 60512-16-20

Edition 1.0 (1996-07-31)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)

Stability Date: 2017

IEC 60512-16-20

Edition 1.0 (1996-07-31)

Versión Oficial en Español - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 16: Ensayos mecánicos de contactos y terminales. Sección 20: Ensayo 16t: Resistencia mecánica (terminal cableada de conexionessin soldadur

Stability Date: 2017

IEC 60512-16-21

Edition 1.0 (2012-05-07)

Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses

Stability Date: 2017

IEC 60512-17-1

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness

Stability Date: 2013

IEC 60512-17-2

Edition 1.0 (2011-04-07)

Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation

Stability Date: 2017

IEC 60512-17-3

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)

Stability Date: 2017

IEC 60512-17-4

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion

Stability Date: 2017

IEC 60512-19-1

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels

Stability Date: 2017

IEC 60512-19-3

Edition 1.0 (1997-07-30)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance

Stability Date: 2017

IEC 60512-19-3

Edition 1.0 (1997-07-01)

Versión oficial en español - Componentes electromécanicos para equipos electrónicos - Procedimientos básicos de ensayo y métodos de medida - Parte 19: Ensayos de resistencia química - Sección 3: Ensayo 19c: Resistencia a los fluidos

Stability Date: 2017

IEC 60512-20-1

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

Stability Date: 2017

IEC 60512-20-2

Edition 1.0 (2000-04-13)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness

Stability Date: 2017

IEC 60512-20-2

Edition 1.0 (2000-04-13)

Versión Oficial En español - Componentes electromecánicos para equipos electrónicos. Procedimientos básicos de ensayo y métodos de medida. Parte 20-2: Ensayo 20b. Ensayos de inflamabilidad. Resistencia al fuego.

Stability Date: 2017

IEC 60512-20-3

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire

Stability Date: 2017

IEC 60512-21-1

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance

Stability Date: 2013

IEC 60512-22-1

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance

Stability Date: 2017

IEC 60512-23-2

Edition 1.0 (2010-06-10)

Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters

Stability Date: 2017

IEC 60512-23-3

Edition 1.0 (2000-12-21)

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

Stability Date: 2017

IEC 60512-23-3

Edition 1.0 (2003-04-17)

Corrigendum 1 - Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories

Stability Date: 2017

IEC 60512-23-3

Edition 1.0 (2000-12-21)

Versión Oficial En español (Incluye el Corrigendum1 de abril de 2003 - Compon) il de 2003 - Componentes electromecánicos para equipos electrónicos. Procedimientos de ensayo básicos y métodos de medida. Parte 23-3: Ensayo 23c. Eficacia de los blindajes de los conectores y de los accesorios.

Stability Date: 2017

IEC 60512-23-4

Edition 1.0 (2001-06-19)

Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain

Stability Date: 2017

IEC 60512-23-4

Edition 1.0 (2001-06-19)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y medidas. Parte 23-4: Ensayos de apantallado y filtrado. Ensayo 23d: Reflexiones de línea de transmisión en el dominio del tiempo.

Stability Date: 2017

IEC 60512-23-7

Edition 1.0 (2005-01-27)

Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors

Stability Date: 2017

IEC 60512-23-7

Edition 1.0 (2005-01-27)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 23-7: Ensayos de apantallado y de filtrado. Ensayo 23g: Impedancia de transferencia eficaz de los conectores.

Stability Date: 2017

IEC 60512-24-1

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism

Stability Date: 2017

IEC 60512-25-1

Edition 1.0 (2001-07-26)

Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio

Stability Date: 2017

IEC 60512-25-1

Edition 1.0 (2001-07-26)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-1: Ensayo 25a. Tasa de diafonía.

Stability Date: 2017

IEC 60512-25-2

Edition 1.0 (2002-03-12)

Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)

Stability Date: 2017

IEC 60512-25-2

Edition 1.0 (2002-03-12)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-2: Ensayo 25b: Atenuación (pérdida de inserción).

Stability Date: 2017

IEC 60512-25-3

Edition 1.0 (2001-07-26)

Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation

Stability Date: 2017

IEC 60512-25-3

Edition 1.0 (2001-07-26)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-3: Ensayo 25c. Degradación del tiempo de subida.

Stability Date: 2017

IEC 60512-25-4

Edition 1.0 (2001-07-26)

Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay

Stability Date: 2017

IEC 60512-25-4

Edition 1.0 (2001-07-26)

Versión Oficial en Español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-4: Ensayo 25d. Retardo de propagación.

Stability Date: 2017

IEC 60512-25-5

Edition 1.0 (2004-07-15)

Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss

Stability Date: 2017

IEC 60512-25-5

Edition 1.0 (2004-07-15)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-5: Ensayo 25e. Pérdida de retorno

Stability Date: 2017

IEC 60512-25-6

Edition 1.0 (2004-05-26)

Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter

Stability Date: 2017

IEC 60512-25-6

Edition 1.0 (2004-05-26)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-6: Ensayo 25f. Diagrama de ojo y fluctuación.

Stability Date: 2017

IEC 60512-25-7

Edition 1.0 (2004-12-15)

Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)

Stability Date: 2017

IEC 60512-25-7

Edition 1.0 (2004-12-15)

Versión Oficial En español - Conectores para equipos electrónicos. Ensayos y mediciones. Parte 25-7: Ensayo 25g: Impedancia, coeficiente de reflexión y relación de ondas estacionarias de tensión (VSWR).

Stability Date: 2017

IEC 60512-25-9

Edition 1.0 (2008-08-28)

Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk

Stability Date: 2017

IEC 60512-26-100

Edition 1.1 (2011-05-25)

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Stability Date: 2017

IEC 60512-26-100

Edition 1.0 (2008-07-21)

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Stability Date: 2017

IEC 60512-26-100-am1

Edition 1.0 (2011-03-14)

Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Stability Date: 2017

IEC 60512-27-100

Edition 1.0 (2011-12-07)

Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g

Stability Date: 2015

IEC 60512-99-001

Edition 1.0 (2012-08-13)

Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power

Stability Date: 2015

IEC 60603-1

Edition 2.0 (1991-06-28)

Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

Stability Date: 2017

IEC 60603-1

Edition 2.1 (1991-06-28)

Versión Oficial En español (Incluye modificación 1:92) Conectores para frecuencias inferiores a 3 MHz para uso con tarjetas impresas. Parte 1: Especificación genérica. Requisitos generales y guía para la redacción de las especificaciones particulares, con aseguramiento de la calidad.

IEC 60603-1-am1

Edition 2.0 (1992-06-15)

Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality

Stability Date: 2017

IEC 60603-2

Edition 3.0 (1995-09-22)

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Stability Date: 2017

IEC 60603-2-am1

Edition 3.0 (2000-08-18)

Amendment 1 - Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features

Stability Date: 2017

IEC 60603-3

Edition 1.0 (1987-03-15)

Connectors for frequencies below 3 MHz for use with printed boards. Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing

Stability Date: 2017

IEC 60603-3

Edition 1.0 (1987-03-15)

Versión Oficial en Español - Conectores para frecuencias inferiores a 3 MHz para uso con tarjetas impresas. Parte 3: Conectores de dos partes para tarjetas impresas con contactos separados por 2,54 mm (0,1 in) y salidas escalonadas con esa misma separación.

Stability Date: 2017

IEC 60603-4

Edition 1.0 (1987-03-15)

Connectors for frequencies below 3 MHz for use with printed boards. Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres and staggered terminations at that same spacing

Stability Date: 2017

IEC 60603-4

Edition 1.0 (1987-03-15)

Versión Oficial en Español - Conectores para frecuencias inferiores a 3 MHz para uso con tarjetas impresas. Parte 4: Conectores de dos partes para tarjetas impresas con contactos separados por 1,91 mm (0,075 in) y salidas escalonadas con esa misma separación.

Stability Date: 2017

IEC 60603-5

Edition 1.0 (1987-06-15)

Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing

Stability Date: 2017

IEC 60603-5

Edition 1.0 (1987-06-15)

Versión Oficial en Español - Conectores para frecuencias inferiores a 3 MHz para uso con tarjetas impresas. Parte 5: Conectores para insertar en tarjeta impresa y conectores de dos partes para tarjetas impresas de doble cara con una separación de 2,54 mm (0,1 in).

Stability Date: 2017

IEC 60603-6

Edition 1.0 (1987-12-30)

Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double sided printed boards of 1.6 mm (0.063 in) nominal thickness

Stability Date: 2017

IEC 60603-6

Edition 1.0 (1987-12-30)

Versión Oficial en Español - Conectores para frecuencias inferiores a 3 MHz para uso con tarjetas impresas. Parte 6: Conectores de tarjeta y conectores de tarjeta con circuito impreso con separación entre los contactos de 2,54 mm (0,1 in) para tarjetas con circuito impreso de simple

Stability Date: 2017

IEC 60603-7

Edition 3.1 (2011-12-16)

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Stability Date: 2014

IEC 60603-7

Edition 3.0 (2008-07-09)

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Stability Date: 2015

IEC 60603-7-am1

Edition 3.0 (2011-09-29)

Amendment 1 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors

Stability Date: 2014

IEC 60603-7-1

Edition 3.0 (2011-04-07)

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors

Stability Date: 2017

IEC 60603-7-2

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz

Stability Date: 2017

IEC 60603-7-3

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz

Stability Date: 2017

IEC 60603-7-4

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Stability Date: 2017

IEC 60603-7-5

Edition 2.0 (2010-04-26)

Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz

Stability Date: 2017

IEC 60603-7-7

Edition 3.0 (2010-05-31)

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz

Stability Date: 2017

IEC 60603-7-41

Edition 1.0 (2010-03-10)

Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Stability Date: 2015

IEC 60603-7-51

Edition 1.0 (2010-03-10)

Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz

Stability Date: 2015

IEC 60603-7-71

Edition 1.0 (2010-06-28)

Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz

Stability Date: 2015

IEC 60603-8

Edition 1.0 (1991-01-20)

Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm

Stability Date: 2015

IEC 60603-8

Edition 1.0 (1991-01-20)

Versión Oficial en Español - Conectores para frecuencias por debajo de 3 MHz para utilizar en tarjetas con circuito impreso. Parte 8: Conectores en dos partes para tarjetas impresas, para rejilla básica de 2,54 mm (0,1in), con contactos macho de sección 0,63 mm x 0,63 mm.

Stability Date: 2015

IEC 60603-9

Edition 1.0 (1990-11-30)

Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)

Stability Date: 2015

IEC 60603-9

Edition 1.0 (1990-11-30)

Versión Oficial en Español - Conectores para frecuencias inferiores a 3 MHz para uso con tarjetas impresas. Parte 9: Conectores de dos partes para tarjetas impresas, conectores de panel trasero y de cable, para rejilla básica de 2,54 mm (0,1in).

Stability Date: 2015

IEC 60603-10

Edition 1.0 (1991-11-04)

Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type

Stability Date: 2015

IEC 60603-11

Edition 1.0 (1992-03-15)

Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)

Stability Date: 2015

IEC 60603-12

Edition 1.0 (1992-06-25)

Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits

Stability Date: 2015

IEC 60603-13

Edition 1.0 (1995-01-25)

Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)

Stability Date: 2015

IEC 60603-14

Edition 1.0 (1998-02-26)

Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment

Stability Date: 2015

IEC 60807-1

Edition 2.0 (1991-10-15)

Rectangular connectors for frequencies below 3 MHz - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications for connectors with assessed quality

Stability Date: 2017

IEC 60807-2

Edition 2.0 (1992-11-13)

Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

Stability Date: 2017

IEC 60807-2-am1

Edition 2.0 (1996-01-30)

Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

Stability Date: 2017

IEC 60807-3

Edition 1.0 (1990-07-18)

Rectangular connectors for frequencies below 3 MHz. Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction

Stability Date: 2017

IEC 60807-6

Edition 1.0 (1988-05-15)

Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types

Stability Date: 2017

IEC 60807-7

Edition 1.0 (1991-12-20)

Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality

Stability Date: 2017

IEC 60807-8

Edition 1.0 (1992-01-31)

Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen

Stability Date: 2017

IEC 60807-9

Edition 1.0 (1993-04-20)

Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors

Stability Date: 2017

IEC 61076-1

Edition 2.0 (2006-04-27)

Connectors for electronic equipment - Product requirements - Part 1: Generic specification

Stability Date: 2014

IEC 61076-2

Edition 2.0 (2011-06-21)

Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors

Stability Date: 2015

IEC 61076-2-001

Edition 2.0 (2011-06-21)

Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification

Stability Date: 2015

IEC 61076-2-101

Edition 3.0 (2012-04-20)

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking

Stability Date: 2016

IEC 61076-2-102

Edition 1.0 (2002-06-05)

Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply

Stability Date: 2015

IEC 61076-2-102

Edition 1.0 (2002-06-05)

Versión Oficial En español - Conectores para equipos electrónicos. Parte 2-102: Conectores circulares de calidad asegurada. Especificación particular para clavijas y bases para fuentes externas de alimentación en baja tensión.

Stability Date: 2015

IEC 61076-2-103

Edition 1.0 (2004-03-08)

Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')

Stability Date: 2015

IEC 61076-2-104

Edition 1.0 (2008-05-09)

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking

Stability Date: 2013

IEC 61076-2-105

Edition 1.0 (2008-07-25)

Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking

Stability Date: 2017

IEC 61076-2-106

Edition 1.0 (2011-06-21)

Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67

Stability Date: 2015

IEC 61076-2-107

Edition 1.0 (2010-04-29)

Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking

Stability Date: 2017

IEC/PAS 61076-2-109

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz

Stability Date: 2014

IEC/PAS 61076-2-110

Edition 1.0 (2010-03-24)

Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s

Stability Date: 2013

IEC 61076-3

Edition 2.0 (2008-07-09)

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification

Stability Date: 2017

IEC 61076-3-001

Edition 2.0 (2008-07-09)

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification

Stability Date: 2017

IEC 61076-3-100

Edition 1.0 (1999-11-16)

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row

Stability Date: 2017

IEC 61076-3-101

Edition 1.0 (1997-09-05)

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line

Stability Date: 2017

IEC 61076-3-101

Edition 1.0 (2010-04-21)

Corrigendum 1 - Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line

Stability Date: 2017

IEC 61076-3-101

Edition 1.0 (1997-09-05)

Versión Oficial en Español - Conectores de calidad asegurada para uso en aplicaciones analógicas de corriente continua y baja frecuencia y en aplicaciones digitales de transmisión de datos. Parte 3: Conectores rectangulares. Sección 101: Especificación particular para una familiad

Stability Date: 2017

IEC 61076-3-103

Edition 1.0 (2003-11-28)

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

Stability Date: 2015

IEC 61076-3-103

Edition 1.0 (2003-11-28)

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)

Stability Date: 2015

IEC 61076-3-104

Edition 2.0 (2006-07-25)

Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz

Stability Date: 2013

IEC 61076-3-106

Edition 1.0 (2006-09-12)

Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface

Stability Date: 2017

IEC 61076-3-110

Edition 2.0 (2012-05-07)

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz

Stability Date: 2015

IEC 61076-3-112

Edition 1.0 (2006-04-27)

Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment

Stability Date: 2015

IEC 61076-3-114

Edition 1.0 (2009-04-29)

Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type

Stability Date: 2017

IEC 61076-3-115

Edition 1.0 (2009-06-17)

Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type

Stability Date: 2017

IEC 61076-3-116

Edition 1.0 (2008-09-09)

Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever

Stability Date: 2015

IEC 61076-3-117

Edition 1.0 (2009-04-29)

Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling

Stability Date: 2017

IEC 61076-3-118

Edition 1.0 (2010-04-26)

Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling

Stability Date: 2015

IEC 61076-4

Edition 1.0 (1995-09-22)

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors

Stability Date: 2015

IEC 61076-4

Edition 1.0 (1995-09-22)

VERSION OFICIAL EN ESPANOL - Conectores con aseguramiento de la calidad para uso en aplicaciones analógicas de c.c. y baja frecuencia, y en aplicaciones digitales de transmisión de datos. Parte 4: Especificación intermedia. Conectores para tarjetas con circuito impreso.

Stability Date: 2015

IEC 61076-4-001

Edition 1.0 (1996-08-19)

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification

Stability Date: 2015

IEC 61076-4-001

Edition 1.0 (1996-08-19)

VERSION OFICIAL EN ESPANOL - Conectores con aseguramiento de la calidad para uso en aplicaciones analógicas de c.c. y baja frecuencia, y en aplicaciones digitales de transmisión de datos. Parte 4: Conectores para tarjetas impresas. Sección 001: Especificación marco particular.

Stability Date: 2015

IEC 61076-4-100

Edition 2.0 (2001-10-18)

Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes

Stability Date: 2015

IEC 61076-4-101

Edition 2.0 (2001-09-18)

Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

Stability Date: 2015

IEC 61076-4-101

Edition 2.0 (2003-11-04)

Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917

Stability Date: 2015

IEC 61076-4-102

Edition 1.0 (1997-04-23)

Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917

Stability Date: 2015

IEC 61076-4-103

Edition 1.0 (1999-02-26)

Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm

Stability Date: 2015

IEC 61076-4-104

Edition 1.0 (1999-03-19)

Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm

Stability Date: 2015

IEC 61076-4-105

Edition 1.0 (1995-06-19)

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication .

Stability Date: 2015

IEC 61076-4-107

Edition 1.0 (2001-08-22)

Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations

Stability Date: 2015

IEC 61076-4-108

Edition 1.0 (2002-02-14)

IEC 61076-4-108: Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1

Stability Date: 2015

IEC 61076-4-110

Edition 1.0 (2001-12-07)

Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function

Stability Date: 2015

IEC 61076-4-111

Edition 1.0 (2002-02-12)

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1

Stability Date: 2011

IEC 61076-4-111

Edition 1.0 (2002-02-12)

Versión Oficial En español - Conectores para equipos electrónicos. Parte 4-111: Conectores para tarjetas de circuito impreso con aseguramiento de la calidad. Especificación particular para módulos de conectores de potencia de dos partes, para tarjetas de circuito impreso y paneles de fondo que tienen características de acoplamiento iniciales y que tienen una cuadrícula básica de 2,5 mm de acuerdo con la Norma CEI60917-1.

Stability Date: 2011

IEC 61076-4-113

Edition 1.0 (2002-11-15)

Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

Stability Date: 2017

IEC 61076-4-113

Edition 1.0 (2002-11-15)

Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications

Stability Date: 2017

IEC 61076-4-114

Edition 1.0 (2003-02-26)

Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm

Stability Date: 2011

IEC 61076-4-115

Edition 1.0 (2003-02-26)

Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment

Stability Date: 2017

IEC 61076-4-116

Edition 1.0 (2012-04-19)

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function

Stability Date: 2014

IEC 61076-7

Edition 1.0 (2000-06-16)

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation

Stability Date: 2017

IEC 61076-7

Edition 1.0 (2000-06-16)

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification

Stability Date: 2017

IEC 61076-7

Edition 1.0 (2000-12-08)

Versión Oficial En español - Conectores para uso en aplicaciones analógicas de tensión continua y baja frecuencia así como en aplicaciones digitales de alta velocidad de transmisión. Parte 7: Accesorios de salida de cables con calidad evaluada, incluyendo cualificación y aprobación

Stability Date: 2017

IEC 61076-7-001

Edition 1.0 (2004-07-15)

Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification

Stability Date: 2017

IEC 61076-7-100

Edition 1.0 (2006-05-23)

Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system

Stability Date: 2017

IEC/TS 61586

Edition 1.0 (1997-03-12)

Estimation of the reliability of electrical connectors

Stability Date: 2014

IEC 61984

Edition 2.0 (2008-10-08)

Connectors - Safety requirements and tests

Stability Date: 2017

IEC 61984

Edition 2.0 (2011-10-18)

Corrigendum 1 - Connectors - Safety requirements and tests

Stability Date: 2017

IEC 62197-1

Edition 1.0 (2006-04-27)

Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification

Stability Date: 2017

IEC/TR 62652

Edition 1.0 (2010-03-30)

Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications

Stability Date: 2017