PNW 16-1 Ed. 1.0

Method of measuring material dielectric constant by using microwave waveguides

PNW 46B-229 Ed. 1.0

Test methods for balance cables assemblies up to 600 MHz

PNW 46D-289 Ed. 1.0

Matched connector 9.52

PNW 46D-290 Ed. 1.0

High density of coaxial connector for metric 2 mm system (MCC 2)

PNW 46D-291 Ed. 1.0

SMT coaxial connector (MMX)

PNW 46D-293 Ed. 1.0

Harmonization of IEC and CECC radio frequency connector generic specifications

PNW 46D-300 Ed. 1.0

Radio frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)

PNW 46D-301 Ed. 1.0

Radio frequency connectors - Part 2: Coaxial unmatched connector

PNW 46D-313 Ed. 1.0

Revision of IEC 61169-1: Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

PNW 46D-315 Ed. 1.0

To upgrade IEC 60169-2 - Matched connector 952

PNW 46D-316 Ed. 1.0

Amendment to radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)

PNW 46F-7 Ed. 1.0

Measurement methods for reflectivity of electromagnetic absorbers in millimetre wave frequency range

PNW 46F-17 Ed. 1.0

Cavity Resonator Method to Measure the Complex Permittivity of Low-Loss Dielectric Plates

DEL 1169-1 am2 f1 Ed. 1.0

Guidelines concerning the tensile and torsional forces to be applied when testing the effectiveness of connector/cable retention, to be included in IEC 1169-1

IEC 60153-1 Ed. 1.0

Hollow metallic waveguides. Part 1: General requirements

IEC 60153-2 Ed. 2.0

Hollow metallic waveguides. Part 2: Relevant specifications for ordinary rectangular waveguides

IEC 60153-2 am1 f1 Ed. 2.0

Deletion of waveguide sizes R35 and R41 from IEC 153-2

IEC 60153-3 Ed. 1.0

Hollow metallic waveguides. Part 3: Relevant specifications for flat rectangular waveguides

IEC 60153-4 Ed. 2.0

Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides

IEC 60153-6 Ed. 1.0

Hollow metallic waveguides - Part 6: Relevant specifications for medium flat rectangular waveguides

IEC 60153-6 am1 Ed. 1.0

Amendment No. 1

IEC 60153-7 Ed. 1.0

Hollow metallic waveguides - Part 7: Relevant specifications for square waveguides

IEC 60154-1 Ed. 2.0

Flanges for waveguides. Part 1: General requirements

IEC 60154-1 am1 Ed. 2.0

Amendment No. 1

IEC 60154-2 Ed. 2.0

Flanges for waveguides. Part 2: Relevant specifications for flanges for ordinary rectangular waveguides

IEC 60154-2 am1 Ed. 2.0

Amendment No. 1

IEC 60154-2 am1 f3 Ed. 2.0

Modified D style (R) waveguide flange to be included in IEC 154-2

IEC 60154-2 am1 f5 Ed. 2.0

Amendment to IEC 154-2 - Flange Type D

IEC 60154-2 am1 f6 Ed. 2.0

Amendment to IEC 154-2 - Flange Type A

IEC 60154-2 am1 f7 Ed. 2.0

Surface finish on flanges, to be included in IEC 154-2

IEC 60154-2 am1 f8 Ed. 2.0

Flange type B

IEC 60154-2 am2 Ed. 2.0

Flange type C

IEC 60154-3 Ed. 2.0

Flanges for waveguides. Part 3: Relevant specifications for flanges for flat rectangular waveguides

IEC 60154-3 am1 Ed. 2.0

Corrections, changes and additions to IEC 154-3

IEC 60154-4 Ed. 1.0

Flanges for waveguides. Part 4: Relevant specifications for flanges for circular waveguides

IEC 60154-4 Ed. 2.0

Relevant specifications for flanges for circular waveguides

IEC 60154-6 Ed. 1.0

Flanges for waveguides. Part 6: Relevant specifications for flanges for medium flat rectangular waveguides

IEC 60154-6 am1 Ed. 1.0

Corrections, changes and additions to IEC 154-6

IEC 60154-7 Ed. 1.0

Flanges for waveguides - Part 7: Relevant specifications for flanges for square waveguides

IEC 60169-1 Ed. 2.0

Radio-frequency connectors. Part 1: General requirements and measuring methods

IEC 60169-1 am1 Ed. 2.0

Amendment No. 1

IEC 60169-1 am1 f2 Ed. 2.0

Amendment to Sub-clause 16.5.2.1 -Procedures- of IEC 169-1

IEC 60169-1-1 Ed. 1.0

Radio-frequency connectors - Part 1: General requirements and measuring methods - Section One: Electrical tests and measuring procedures: Reflection factor

IEC 60169-1-1 Ed. 2.0

Systematic review of IEC 169-1-1 (1987)

IEC 60169-1-3 Ed. 1.0

Radio-frequency connectors - Part 1: General requirements and measuring methods - Section Three: Electrical tests and measuring procedures: Screening effectiveness

IEC 60169-1-3 am1 Ed. 1.0

Amendment No. 1

IEC 60169-2 Ed. 1.0

Radio-frequency connectors. Part 2: Coaxial unmatched connector

IEC 60169-2 am1 Ed. 1.0

Amendment No. 1

IEC 60169-3 Ed. 1.0

Radio-frequency connectors. Part 3: Two-pin connector for twin balanced aerial feeders

IEC 60169-4 Ed. 2.0

Radio-frequency connectors. Part 4: R.F. coaxial connectors with inner diameter of outer conductor 16 mm (0.63 in) with screw lock - Characteristic impedance 50 ohms (Type 7-16)

IEC 60169-5 Ed. 1.0

Radio-frequency connectors. Part 5: R.F. coaxial connectors for cables 96 IEC 50-17 and larger

IEC 60169-6 Ed. 1.0

Radio-frequency connectors. Part 6: R.F. coaxial connectors for cables 96 IEC 75-17 and larger

IEC 60169-7 Ed. 1.0

Radio-frequency connectors. Part 7: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with bayonet lock - Characteristic impedance 50 ohms (Type C)

IEC 60169-7 am1 Ed. 1.0

Amendment No. 1

IEC 60169-8 Ed. 1.0

Radio-frequency connectors. Part 8: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock - Characteristic impedance 50 ohms (Type BNC)

IEC 60169-8 am1 Ed. 1.0

Amendment No. 1

IEC 60169-8 am1 f2 Ed. 1.0

Additional paragraphs required to convert IEC 169-8 into the complete IECQ sectional specification (SS) QC 221200 for series BNC connectors, including a blank detail specification (BDS)

IEC 60169-8 am2 Ed. 1.0

Amendment No. 2

IEC 60169-9 Ed. 1.0

Radio-frequency connectors. Part 9: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with screw coupling - Characteristic impedance 50 ohms (Type SMC)

IEC 60169-9 am1 Ed. 1.0

Amendment No. 1

IEC 60169-9 am1 f2 Ed. 1.0

Amendment to Figures 7, 8 and 9 of IEC 169-9

IEC 60169-9 am1 f3 Ed. 1.0

Amendment to IEC 169-9

IEC 60169-9 am1 f4 Ed. 1.0

Additional paragraphs required to convert IEC 169-9 into the complete IECQ sectional specification (SS) QC 221400 for series SMC connectors, including a blank detail specification (BDS)

IEC 60169-10 Ed. 1.0

Radio-frequency connectors. Part 10: R.F. coaxial connectors with inner diameter of outer conductor 3 mm (0.12 in) with snap-on coupling - Characteristic impedance 50 ohms (Type SMB)

IEC 60169-10 am1 Ed. 1.0

Amendment No. 1

IEC 60169-10 am2 Ed. 1.0

Amendment No. 2

IEC 60169-10 am2 f2 Ed. 1.0

Additional paragraphs required to convert IEC 169-10 into the complete IECQ sectional specification (SS) QC 221300 for series SMB connectors, including a blank detail specification (BDS)

IEC 60169-10 am2 f3 Ed. 1.0

Amendment to IEC 169-10

IEC 60169-11 Ed. 1.0

Radio-frequency connectors. Part 11: R.F. coaxial connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with screw coupling - Characteristic impedance 50 ohms (Type 4.1/9.5)

IEC 60169-12 Ed. 1.0

Radio-frequency connectors. Part 12: R.F. coaxial connectors with screw coupling, unmatched (Type UHF)

IEC 60169-13 Ed. 1.0

Radio-frequency connectors - Part 13: R.F. coaxial connectors with inner diameter of outer conductor 5.6 mm (0.22 in) - Characteristic impedance 75 ohms (Type 1.6/5.6) - Characteristic impedance 50 ohms (Type 1.8/5.6) with similar mating dimensions

IEC 60169-13 am1 Ed. 1.0

Amendment No. 1

IEC 60169-14 Ed. 1.0

Radio-frequency connectors. Part 14: R.F. coaxial connectors with inner diameter of outer conductor with 12 mm (0.472 in) with screw coupling - Characteristic impedance 75 ohms (Type 3.5/12)

IEC 60169-15 Ed. 1.0

Radio-frequency connectors. Part 15: R.F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in) with screw coupling - Characteristic impedance 50 ohms (Type SMA)

IEC 60169-15 am1 Ed. 1.0

Amendment No. 1

IEC 60169-15 am1 f3 Ed. 1.0

Amendments to IEC 169-15

IEC 60169-15 am2 Ed. 1.0

Additional recommended maximum values for outer conductor continuity for Series SMA solderless connectors to be included in the Sectional Specification arising from Document 46D(C.O.)164

IEC 60169-16 Ed. 1.0

Radio-frequency connectors. Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (Type N)

IEC 60169-16 am1 Ed. 1.0

Amendment No. 1

IEC 60169-16 am1 f1 Ed. 1.0

Additional paragraphs required to convert IEC 169-16 into the complete IECQ sectional specification (SS) QC 222100 for series N connectors, including a blank detail specification (BDS)

IEC 60169-17 Ed. 1.0

Radio-frequency connectors. Part 17: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)

IEC 60169-17 am1 Ed. 1.0

Amendment No. 1

IEC 60169-18 Ed. 1.0

Radio-frequency connectors. Part 18: R.F. coaxial connectors with inner diameter of outer conductor of 2.79 mm (0.110 in) screw coupling. Characteristic impedance 50 ohms (Type SSMA)

IEC 60169-18 am1 f1 Ed. 1.0

Sectional specification (SS) for series SSMA R.F. connectors including the blank detail specification (BDS) and instructions for writing detail specifications (DSS)

IEC 60169-18 am1 f2 Ed. 1.0

Amendment to IEC 169-18

IEC 60169-19 Ed. 1.0

Radio-frequency connectors. Part 19: R.F. coaxial connectors with inner diameter of outer conductor of 2.08 mm (0.082 in) with snap coupling. Characteristic impedance 50 ohms (Type SSMB)

IEC 60169-19 am1 f1 Ed. 1.0

Amendment to IEC 169-19

IEC 60169-19 am1 f2 Ed. 1.0

Sectional specifications (SS) for series SSMB R.F. connectors including the blank detail specification (BDS) and instructions for writing detail specification (DS)

IEC 60169-19 am1 f3 Ed. 1.0

Amendment to IEC 169-19

IEC 60169-19 am1 f4 Ed. 1.0

Amendment to IEC 169-19 - Correction to standard test connector (Grade 0), Figure 7 and Table of dimensions

IEC 60169-20 Ed. 1.0

Radio-frequency connectors. Part 20: R.F. coaxial connectors with inner diameter of outer conductor of 2.08 mm (0.082 in) screw coupling. Characteristic impedance 50 ohms (Type SSMC)

IEC 60169-20 am1 f1 Ed. 1.0

Sectional specifications (SS) for series SSMC R.F. connectors including the blank detail specification (BDS) and instructions for writing detail specification (DS)

IEC 60169-20 am1 f2 Ed. 1.0

Amendment to IEC 169-20

IEC 60169-21 Ed. 1.0

Radio-frequency connectors. Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (0.374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (Types SC-A and SC-B)

IEC 60169-21 am1 Ed. 1.0

Amendment No. 1

IEC 60169-22 Ed. 1.0

Radio-frequency connectors. Part 22: R.F. two-pole bayonet coupled connectors for use with shielded balanced cables having twin inner conductors (Type BNO)

IEC 60169-23 Ed. 1.0

Radio-frequency connectors - Part 23: Pin and socket connector for use with 3.5 mm rigid precision coaxial lines with inner diameter of outer conductor of 3.5 mm (0.1378 in)

IEC 60169-24 Ed. 1.0

Radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F)

IEC 60169-25 Ed. 1.0

Radio-frequency connectors - Part 25: Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (Type TWHN)

IEC 60169-26 Ed. 1.0

Radio-frequency connectors - Part 26: R.F. coaxial connectors with screw coupling - Characteristic impedance 50 ohms - Frequency range 0 to 18 GHz (type TNC 18GHz)

IEC 60169-27 Ed. 1.0

Radio-frequency connectors - Part 27: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohms cable distribution systems (Type E)

IEC 60169-28 Ed. 1.0

Radio-frequency connectors - Part 28: Radio-frequency coaxial connectors with inner diameter of outer conductor of 5,60 mm (0,220 in) with snap-on coupling - Characteristic impedance 75 ohms

IEC 60169-29 Ed. 1.0

Radio-frequency connectors - Part 29: Miniature r.f. coaxial connectors with screw-, push-pull and snap-on coupling or slide-in rack and panel applications; Characteristic impedance 50 ohms (Type 1,0/2,3)

IEC 60169-34 am1 Ed. 1.0

IEC 169: R.F. coaxial connectors with inner diameter of outer conductor XX.XX mm (X.XX in) with screw coupling - Characteristic impedance 50 ohms (Mini UHF)

IEC 60169-35 Ed. 1.0

Sectional Specification (SS) for Series 2,92 mm R.F. connectors including the Blank Detail Specification (BDS) pro-forma and instructions for writing Detail Specifications (DS)

IEC 60169-37 Ed. 1.0

IEC 169-...: Part ...: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 Ohm cable distribution systems (Type FD)

IEC 60169-38 Ed. 1.0

Radio-frequency connectors - Part 28: Radio-frequency coaxial connectors with screw coupling, typically for use in 50 ohm cable distribution systems (Type 2,4)

IEC 60261 Ed. 2.0

Sealing test for pressurized waveguide tubing and assemblies

IEC 60339-2 Ed. 2.0

General purpose rigid coaxial transmission lines and their associated flange connectors - Part 2: Detail specifications

IEC 60374 Ed. 1.0

Guide for choosing modular dimensions for waveguide components

IEC 60457-1 Ed. 1.0

Rigid precision coaxial and their associated precision connectors. Part 1: General requirements and measuring methods

IEC 60457-2 Ed. 1.0

Rigid precision coaxial and their associated precision connectors. Part 2: 50 ohms 7 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector

IEC 60457-3 Ed. 2.0

Rigid precision coaxial and their associated precision connectors. Part 3: 14 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedances 50 ohms and 75 ohms

IEC 60457-4 Ed. 2.0

Rigid precision coaxial and their associated precision connectors. Part 4: 21 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedance 50 ohms (Type 9/21) - Characteristic impedance 75 ohms (Type 6/21)

IEC 60457-5 Ed. 1.0

Rigid precision coaxial and their associated precision connectors. Part 5: 50 ohms 3.5 mm rigid precision coaxial line with provision for mounting connectors

IEC 60636 Ed. 1.0

Flexible waveguide assembly performance

IEC 60803 Ed. 1.0

Recommended dimensions for hexagonal and square crimping-die cavities, indentors, ganges, outer conductor crimp sleeves and centre contact crimp barrels for R.F. cables and connectors

IEC 60803 am1 Ed. 1.0

Amendment No. 1

IEC 61141 Ed. 2.0

Systematic review of IEC 1141 (1992)

IEC/TR 61141 Ed. 1.0

Upper frequency limit of r.f. coaxial connectors

IEC 61169-1 Ed. 1.0

Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

IEC 61169-1 Ed. 1.2

Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods

IEC 61169-1 Ed. 2.0

Radio Frequency Connectors Part 1: Generic specification - General requirements and measuring methods

IEC 61169-1 am1 Ed. 1.0

Amendment No. 1

IEC 61169-1 am1 f2 Ed. 1.0

Amendment to IEC 1169-1 - Addition of a test for the effectiveness of safety-wire holes in coupling and locking nuts

IEC 61169-1 am2 Ed. 1.0

Amendment No. 2

IEC 61169-1 am3 f2 Ed. 1.0

Amendment 3 to IEC 61169-1 (1st ed.)

IEC 61169-1 am3 f3 Ed. 1.0

Amendment to IEC 1169-1 to include Capability Approval Procedures

IEC 61169-1-1 Ed. 1.0

Radio frequency connectors - Part 1-1: Single, multi-series dual language blank detail specification

IEC 61169-2 Ed. 1.0

Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52

IEC 61169-2 Ed. 2.0

Radio-frequency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52

IEC 61169-4 Ed. 1.0

Radio-frequency connectors - Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 ohms (type 7-16)

IEC/PAS 61169-4 Ed. 1.0

Radio-frequency connectors - Part 4: Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 ohms (type 7-16)

IEC 61169-8 Ed. 1.0

Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohm (type BNC)

IEC 61169-14 Ed. 1.0

Radio-frequency connectors - Part 14: R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling - Characteristic impedance 75 ohms (Type 3,5/12)

IEC 61169-16 Ed. 1.0

Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristics impedance 50 ohms (75 ohms) (type N)

IEC 61169-18 Ed. 1.0

Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA

IEC/PAS 61169-18 Ed. 1.0

Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA

IEC 61169-19 Ed. 1.0

Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB

IEC/PAS 61169-19 Ed. 1.0

Radio-frequency connectors - Part 19: Sectional specification for SSMB series R.F. coaxial connectors

IEC 61169-21 Ed. 1.0

Sectional specification (SS) for series SC-B R.F. connectors including the blank detail specification (BDS) and instructions for writing detail specifications (DS)

IEC 61169-24 Ed. 1.0

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)

IEC 61169-24 Ed. 2.0

Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (type F)

IEC 61169-26 Ed. 1.0

Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors

IEC 61169-29 Ed. 1.0

Radio-frequency connectors - Part 29: Sectional specification - Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) - Characteristic impedance 50 ohms (type 1,0/2,3) - 50 ohms and 75 ohms applications

IEC 61169-31 Ed. 1.0

Radio frequency connectors - Part 31: RF coaxial with inner diameter of outer conductor 1,0 mm (0,039 in) with screw coupling - Characteristic impedance 50 ohms (type 1,0)

IEC 61169-32 Ed. 1.0

Radio-frequency connectors - Part 32: RF coaxial connectors with inner diameter of outer conductor 1,85 mm (0,072 in) with screw coupling - Characteristic impedance 50 ohms (type 1,85)

IEC 61169-33 Ed. 1.0

Radio-frequency connectors - Part 33: Sectional Specification (SS) for Type BMA R.F. connectors

IEC 61169-35 Ed. 1.0

Radio-frequency connectors - Part 35: Sectional specification for 2,92 series RF connectors

IEC/PAS 61169-35 Ed. 1.0

Radio-frequency connectors - Part 35: Sectional specification - Radio frequency coaxial connectors of type 2,92

IEC 61169-36 Ed. 1.0

Radio-frequency connectors - Part 36: Microminiature r.f. coaxial connectors with snap-on coupling - Characteristic impedance 50 Ohms (Type MCX)

IEC 61169-37 Ed. 1.0

Radio-frequency connectors - Part 37: Sectional specification - STWX8 R.F connectors

IEC 61169-38 Ed. 1.0

Radio-frequency connectors - Part 38: Sectional specification - Radio frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohm (type TMA) - 50 ohm applications

IEC/PAS 61169-38 Ed. 1.0

Radio-frequency connectors - Part 38: Sectional specification - Radio-frequency coaxial connectors model, slide-in (rack and panel applications) - Characteristic impedance 50 ohm (type TMA) - 50 ohm applications

IEC 61169-39 Ed. 1.0

Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors

IEC 61169-39 ff Ed. 1.0

Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors

IEC/PAS 61169-39 Ed. 1.0

Radio-frequency connectors - Part 39: Sectional specification for CQM series quick lock RF connectors

IEC 61169-40 Ed. 1.0

Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors

IEC/PAS 61169-40 Ed. 1.0

Radio-frequency connectors - Part 40: Sectional specification for 2.4 series R.F connectors

IEC 61169-41 Ed. 1.0

Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors

IEC/PAS 61169-41 Ed. 1.0

Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors

IEC 61169-42 Ed. 1.0

Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors

IEC/PAS 61169-42 Ed. 1.0

Radio-frequency connectors - Part 42: Sectional specification for CQN series quick lock RF coaxial connectors

IEC 61169-43 Ed. 1.0

Radio-frequency connectors - Part 43: Sectional specification for RBMA series Blind mating RF coaxial connectors.

IEC/PAS 61169-43 Ed. 1.0

Radio-frequency connectors - Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors

IEC 61169-44 Ed. 1.0

Radio-frequency connectors - Part 44: Sectional specification for series SMP push-on radio-frequency coaxial connectors

IEC/PAS 61169-44 Ed. 1.0

Radio-frequency connectors - Part 44: Sectional specification for SMP push-on radio-frequency coaxial connectors

IEC 61169-45 Ed. 1.0

Radio-frequency connectors Part 45: Sectional specification for SQMA series RF quick lock coaxial connectors

IEC/PAS 61169-45 Ed. 1.0

Radio-frequency connectors - Part 45: Sectional Specification for SQMA series quick lock RF Connectors

IEC 61169-47 Ed. 1.0

Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Ω cable networks (type F-Quick)

IEC 61169-48 Ed. 1.0

Radio-frequency connectors Part 48: Sectional specification for BMP series Blind mate R.F. coaxial connectors

IEC 61169-49 Ed. 1.0

Radio-frequency connectors Part 49: Sectional specification for SMAA series R.F. coaxial connectors

IEC 61580 Ed. 1.0

Measurement of return loss on waveguide and waveguide assemblies

IEC 61580 fC1 Ed. 1.0

Corrigendum 1 - Measurement of return loss on waveguide and waveguide assemblies

IEC 61580-1 Ed. 1.0

Methods of measurement for waveguides - Part 1: Decoupling and rotation of the plane of polarization

IEC 61580-2 Ed. 1.0

Methods of measurement for waveguides - Part 2: Level of intermodulation products

IEC 61580-3 Ed. 1.0

Methods of measurement for Waveguides - Part 3: Variation of group delay

IEC 61580-4 Ed. 1.0

Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies

IEC 61580-4 fC1 Ed. 1.0

Corrigendum 1 - Methods of measurement for waveguides - Part 4: Attenuation of waveguide and waveguide assemblies

IEC 61580-7 Ed. 1.0

Methods of measurement for waveguides - Part 7: Graphical method for the determination of waveguide performance

IEC 61580-8 Ed. 1.0

Methods of measurement for waveguides - Part 8: Waveguide power holding capability

IEC 61580-9 Ed. 1.0

Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces

IEC 62431 Ed. 1.0

Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods

IEC 62431 f1 Ed. 1.0

Measurement methods for reflectivity of electromagnetic absorbers in millimetre wave frequency range

IEC 62431 ff Ed. 1.0

Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods

IEC/PAS 62431 Ed. 1.0

Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave frequency

IEC 62562 Ed. 1.0

Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

IEC 62562 fF Ed. 1.0

Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

IEC/PAS 62562 Ed. 1.0

Cavity resonator method to measure the complex permittivity of low-loss dielectric plates

IEC 62810 Ed. 1.0

Cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods