PWI 86C-1 Ed. 1.0

IEC 61280-2-9/Ed3: Fibre optic communication subsystem test procedures - Part 2-9: Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

PWI 86C-2 Ed. 1.0

IEC 61280-4-4/Ed2: Fibre-optic communication subsystem test procedures - Part 4-4: Polarization mode dispersion measurement for installed links

PWI 86C-3 Ed. 1.0

IEC 61290-1-1/Ed3: Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method

PWI 86C-4 Ed. 1.0

IEC 61291-5-2/Ed 2: Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers

PWI 86C-5 Ed. 1.0

Future IEC 61757-3/Ed1: Fibre optic sensors - Distributed temperature sensing

PWI 86C-6 Ed. 1.0

IEC 62150-3/Ed2: Fibre optic active components and devices - Basic test and measurement procedures -Optical power variation induced by mechanical disturbance in optical connectors and transceiver Interfaces

PWI 86C-7 Ed. 1.0

IEC 62343-1-2/Ed2: Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Categorgy C)

PWI 86C-8 Ed. 1.0

Future IEC 62343-1-4/Ed1: Dynamic modules - Part 1-4 Performance standards - Operating conditions

PWI 86C-10 Ed. 1.0

Future IEC 62343-3-2/Ed1: Dynamic modules - Performance specification templates - Part 3-2: Optical channel monitor

PWI 86C-11 Ed. 1.0

Future IEC 62343-4-1/Ed1: Dynamic modules - Hardware and Software Interface of WSS

PWI 86C-12 Ed. 1.0

Future IEC 62343-5-2/Ed1: Dynamic modules - test methods - Part 5-2 : transient crosstalk measurement for wavelength selective switch (WSS)

PWI 86C-13 Ed. 1.0

Future IEC 61282-12/TR/Ed1: Fibre optic communication system design guides - Part 12: In-Band OSNR

PWI 86C-14 Ed. 1.0

Future IEC 61282-13/TR/Ed1: Fibre optic communication system design guides - Part 13: In- service analysis

PWI 86C-16 Ed. 1.0

Future IEC 61292-8/TR/Ed1: Optical amplifiers - Part 8: High power amplifiers

PWI 86C-17 Ed. 1.0

IEC 62343-6-2/TR/Ed2: Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results

PWI 86C-18 Ed. 1.0

IEC 62343-6-5/TR/Ed2: Dynamic modules - Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules

PNW 86C-263 Ed. 1.0

Proposed IEC 61282-6: TR3 Guideline for Skew Design in Parallel Optical Interconnection Systems

PNW 86C-278 Ed. 1.0

Discrete/integrated optoelectronic semiconductor devices for fibre optic communications including hybrid devices - Basic test and measurement procedures - Part 1: General and guidance

DEL 86C-590 Ed. 1.0

IEC 61250-3 Ed 1.0: Fibre optic active components and devices - Basic test and measurement procedures - Part 3: Measuring methods for semiconductor optical transmitters for analogue applications

PNW 86C-1096 Ed. 1.0

Future IEC 61757-2: Fibre optic sensors - Strain Measurement - Part 2 Fibre Bragg Gratings

PNW 86C-1120 Ed. 1.0

Future IEC 61290-1/Ed1: Optical amplifiers - Test Methods - Part 1: Optical power and gain parameters

PNW 86c-1122 Ed. 1.0

Future IEC 62148-18/Ed1: Fiber optic active components and devices - Package and interface standards - Part 18: 40-Gbit/s serial transmitter and receiver components for use with the LC connector interface

IEC 61280-1-1 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable

IEC 61280-1-1 Ed. 2.0

Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable

DEL 61280-1-2 Ed. 1.0

Fibre optic communications subsystem test procedures - General communications subsystems - Part 1-2: Transmitter output optical power measurement for multimode fibre optic cable

IEC 61280-1-3 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement

IEC 61280-1-3 Ed. 2.0

Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement

IEC 61280-1-4 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters

IEC 61280-1-4 Ed. 2.0

Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method

IEC 61280-2-1 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement

IEC 61280-2-1 Ed. 2.0

Fibre optic communication subsystem test procedures - Part 2-1: Digital systems - Receiver sensitivity and overload measurement

IEC 61280-2-2 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 2-2: Test procedures for digital systems - Optical eye pattern, waveform, and extinction ratio

IEC 61280-2-2 Ed. 2.0

Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement

IEC 61280-2-2 Ed. 3.0

Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement

IEC 61280-2-2 Ed. 4.0

Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement

DEL 61280-2-3 f1 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-3: Digital system - measurement of jitter parameters

IEC 61280-2-3 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-3: Digital systems - Jitter and wander measurements

IEC 61280-2-3 ff Ed. 1.0

Fibre optic communication subsystem tets procedures - Part 2-3: Digital systems - Jitter and wander measurements

IEC 61280-2-4 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement

IEC 61280-2-5 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement

DEL 61280-2-6 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 1: Test procedures for digital systems - Section 6: Timing bandwidth measurement

IEC 61280-2-6 f99 Ed. 1.0

Fibre optic communications subsystem test procedures - Part 1: Test procedures for digital systems - Section 6: Wander measurement

IEC 61280-2-7 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 1: Test procedures for digital systems - Section 7: Delay measurement

IEC 61280-2-8 Ed. 1.0

Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements

IEC 61280-2-8 ff Ed. 1.0

Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements

IEC 61280-2-9 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

IEC 61280-2-9 Ed. 2.0

Fibre optic communication subsystem test procedures - Part 2-9: Digital systems - Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems

IEC 61280-2-10 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters

IEC/PAS 61280-2-10 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-10: Time-resolved chirp and alpha-factor measurement of laser transmitters

IEC 61280-2-11 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring

IEC 61280-2-12 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 2-12: Digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment

IEC 61280-3-1 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3: Test procedures for analogue systems - Section 1: Signal-to-noise ratio measurement for video systems

IEC 61280-3-2 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3-2: Test procedures for analogue systems - Carrier-to-noise ratio measurements for video systems

IEC 61280-3-3 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3-3: Test procedures for analogue systems - Composite second-order distortion measurements for video systems

IEC 61280-3-4 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3-4: Test procedures for analogue systems - Composite triple-beat noise measurement for video systems

IEC 61280-3-5 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3-5: Test procedures for analogue systems - Cross modulation measurement for video systems

IEC 61280-3-6 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3-6: Test procedures for analogue systems - Receiver sensitivitymeasurement for video systems

IEC 61280-3-7 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 3-7: Test procedures for analogue systems - Transmitter or receiver bandwidth measurement

IEC 61280-3-8 Ed. 1.0

Fibre optic communications subsystem basic test procedures - Part 3: Test procedures for analogue systems - Section 8: Modulation factor/index measurement

IEC 61280-4-1 Ed. 1.0

Fibre-optic communication subsystem test procedures - Part 4-1: Cable plant and links - Multimode fibre-optic cable plant attenuation measurement

IEC 61280-4-1 Ed. 2.0

Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement

IEC 61280-4-1 ff Ed. 2.0

Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement

IEC 61280-4-2 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation

IEC 61280-4-2 Ed. 2.0

Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant- Single-mode attenuation and optical return loss measurement

IEC 61280-4-3 Ed. 1.0

Fibre optic communication subsystem basic test procedures - Part 4: Test procedures for fibre optic cable plant - Section 3: Single-mode fibre optic cable plant optical return loss measurement

IEC 61280-4-4 Ed. 1.0

Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links

IEC 61281-1 Ed. 1.0

Fibre optic communication subsystems - Part 1:Generic specification

IEC/TR 61282-1 Ed. 1.0

Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems

DEL/TR 61282-2 Ed. 1.0

Fibre optic communication subsystem design guides - Part 2: Design guide for multimode digital and analogue systems

IEC/TR 61282-2 Ed. 1.0

Fibre optic communication system design guides - Part 2: Multimode and single-mode Gbit/s applications - Gigabit ethernet model

IEC/TR 61282-3 Ed. 1.0

Fibre optic communication system design guides - Part 3: Calculation of polarization mode dispersion

IEC/TR 61282-3 Ed. 2.0

Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion

IEC/TR 61282-4 Ed. 1.0

Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects

IEC/TR 61282-4 Ed. 2.0

Fibre optic communication system design guides - Part 4: Accommodation and utilization of non-linear effects

IEC/TR 61282-5 Ed. 1.0

Fibre optic communication system design guides - Part 5: Accommodation and compensation of dispersion

IEC/TR 61282-6 Ed. 1.0

Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems

IEC/TR 61282-7 Ed. 1.0

Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion

IEC/TR 61282-8 Ed. 1.0

Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data

IEC/TR 61282-9 Ed. 1.0

Fibre optic communication system design guides - Part 9: Guidance on polarization mode dispersion measurements and theory

IEC/TR 61282-10 Ed. 1.0

Fibre optic communication system design guides - Part 10: Characterization of the quality of optical vector-modulated signals with the error vector magnitude

IEC/TR 61282-11 Ed. 1.0

Fibre optic communication system design guides - Part 11: Multimode launch conditions

IEC 61290-1-1 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 1-1: Test methods for gain parameters - Optical spectrum analyzer

IEC 61290-1-1 Ed. 2.0

Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method

IEC 61290-1-2 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 1-2: Test methods for gain parameters - Electrical spectrum analyzer

IEC 61290-1-2 Ed. 2.0

Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method

IEC 61290-1-3 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 1-3: Test methods for gain parameters - Optical power meter

IEC 61290-1-3 Ed. 2.0

Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method

IEC 61290-2-1 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 2-1: Test methods for optical power parameters - Optical spectrum analyzer

IEC 61290-2-2 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 2-2: Test methods for optical power parameters - Electrical spectrum analyzer

IEC 61290-2-3 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 2-3: Test methods for optical power parameters - Optical power meter

IEC 61290-3 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters

IEC 61290-3 Ed. 2.0

Optical amplifiers - Test methods - Part 3: Noise figure parameters

DEL 61290-3-1 f1 Ed. 1.0

Basic specification for optical amplifier test methods - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer test method

IEC 61290-3-1 Ed. 1.0

Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method

IEC/PAS 61290-3-1 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 3-1: Test methods for noise figure parameters - Optical spectrum analyzer

IEC 61290-3-2 Ed. 1.0

Optical amplifiers - Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method

IEC 61290-3-2 Ed. 2.0

Optical amplifiers - Test methods - Part 3-2: Noise figure parameters - Electrical spectrum analyzer method

IEC 61290-3-3 Ed. 1.0

Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio

IEC 61290-4-1 Ed. 1.0

Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method

IEC 61290-4-1 f1 Ed. 1.0

Optical amplifiers - Test methods -Part 4-1: Transient parameters - Two wavelength method

IEC 61290-4-2 Ed. 1.0

Optical amplifiers - Test methods - Part 4-2: Gain transient parameters - Broadband source method

IEC 61290-4-3 Ed. 1.0

Optical amplifiers - Test methods - Part 4-3: Power transient parameters in single channel optical fibre amplifiers for receivers

IEC 61290-5-1 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters - Optical spectrum analyser

IEC 61290-5-1 Ed. 2.0

Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method

IEC 61290-5-2 Ed. 1.0

Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method

IEC 61290-5-3 Ed. 1.0

Basic specification for optical amplifier test methods - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance test method using electrical spectrum analyzer

IEC 61290-6-1 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer

IEC 61290-7-1 Ed. 1.0

Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter

IEC 61290-7-1 Ed. 2.0

Optical amplifiers - Test methods - Part 7-1: Out-of-band insertion losses - Filtered optical power meter method

IEC 61290-10-1 Ed. 1.0

Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

IEC 61290-10-1 Ed. 2.0

Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

IEC 61290-10-1 ff Ed. 1.0

Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

IEC 61290-10-2 Ed. 1.0

Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

IEC 61290-10-2 Ed. 2.0

Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer

IEC 61290-10-3 Ed. 1.0

Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods

IEC 61290-10-3 ff Ed. 1.0

Optical amplifiers - Test methods - Part 10-3: Multichannel parameters - Probe methods

IEC 61290-10-4 Ed. 1.0

Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer

IEC 61290-10-5 Ed. 1.0

Optical amplifiers - Test methods - Part 10-5: Multichannel parameters - Distributed Raman amplifier gain and noise figure

IEC 61290-11-1 Ed. 1.0

Optical amplifier test methods - Part 11-1: Polarization mode dispersion - Jones matrix eigenanalysis method (JME)

IEC 61290-11-1 Ed. 2.0

Optical amplifiers - Test methods - Part 11-1: Polarization mode dispersion parameter - Jones matrix eigenanalysis (JME)

IEC 61290-11-2 Ed. 1.0

Optical amplifier - Test methods - Part 11-2: Polarization mode dispersion parameter - Poincaré sphere analysis method

IEC 61291-1 Ed. 1.0

Optical fibre amplifiers - Part 1: Generic specification

IEC 61291-1 Ed. 2.0

Optical amplifiers - Part 1: Generic specification

IEC 61291-1 Ed. 3.0

Optical amplifiers - Part 1: Generic specification

IEC 61291-2 Ed. 1.0

Optical fibre amplifiers - Part 2: Digital applications - Performance specification template

IEC 61291-2 Ed. 2.0

Optical amplifiers - Part 2: Digital applications - Performance specification template

IEC 61291-2 Ed. 3.0

Optical amplifiers - Part 2: Digital applications - Performance specification template

IEC 61291-2-1 Ed. 1.0

Blank detail specification : Optical Fibre Amplifier for digital applications - Power Amplifier for digital applications

IEC 61291-2-2 Ed. 1.0

Blank detail specification on pre- Optical Fibre Amplifier for digital applications - Pre-Amplifier for digital applications

IEC 61291-2-3 Ed. 1.0

Blank detail specification - Optical Fibre Amplifier for digital applications - Line amplifier for digital applications

IEC 61291-2-4 Ed. 1.0

Blank detail specification: Optical Amplified for digital applications - Optically amplified transmitter for digital applications

IEC 61291-2-5 Ed. 1.0

Blank detail specification: Optical fibre amplifiers for digital applications - Optically Amplified receivers for digital applications

IEC 61291-3 Ed. 1.0

Performance specification template on optical amplifiers - Part 3: Optical fibre amplifiers for analogue applications

IEC 61291-3-1 Ed. 1.0

Blank detail specification: Optical fibre amplifier for analogue applications - Part 1: Power amplifier for analogue applications

IEC 61291-3-2 Ed. 1.0

Blank detail specification: Optical fibre amplifier for analogue applications - Part 2: Line amplifier for analogue applications

IEC 61291-3-3 Ed. 1.0

Blank detail specification: Optical fibre amplifiers for analogue applications - Part 3: Optically amplified transmitter for analogue applications

IEC 61291-4 Ed. 1.0

Optical amplifiers - Part 4: Multichannel applications - Performance specification template

IEC 61291-4 Ed. 2.0

Optical amplifiers - Part 4: Multichannel applications - Performance specification template

IEC 61291-4 Ed. 3.0

Optical amplifiers - Part 4: Multichannel applications - Performance specification template

IEC 61291-4-1 Ed. 1.0

Blank detail specification: Optical fibre amplifiers for multi-channel applications - Part 1: Power amplifier for multi-channel applications

IEC 61291-4-2 Ed. 1.0

Blank detail specification: Optical fibre amplifier for multi-channel applications - Part 2: Pre-amplifier for multi-channel applications

IEC 61291-4-3 Ed. 1.0

Blank detail specification: Optical fibre amplifier for multi-channel applications - Part 3: Line amplifier for multi-channel applications

IEC 61291-4-4 Ed. 1.0

Blank detail specification: Optical fibre amplifiers for multi-channel applications - Part 4: Optically amplified transmitter for multi-channel applications

IEC 61291-4-5 Ed. 1.0

Blank detail specification: Optical fibre amplifiers for multi-channel applications - Part 5: Optically amplified receiver for multi-channel applications

IEC 61291-5-2 Ed. 1.0

Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers

IEC 61291-6-1 Ed. 1.0

Optical amplifiers - Part 6-1: Interfaces - Command set

IEC/PAS 61291-6-1 Ed. 1.0

Optical Amplifiers - Part 6-1: Interfaces - Command Set

IEC/TR 61292-1 Ed. 1.0

Fibre optics - Parameters of amplifier components

IEC/TR 61292-1 Ed. 2.0

Optical amplifiers - Part 1: Parameters of amplifier components

IEC/TR 61292-2 Ed. 1.0

Optical amplifier technical reports - Part 2: Theoretical background for noise figure evaluation using the electrical spectrum analyzer

IEC/TR 61292-3 Ed. 1.0

Optical amplifiers - Part 3: Classification, characteristics and applications

IEC/TR 61292-4 Ed. 1.0

Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers

IEC/TR 61292-4 Ed. 2.0

Optical amplifiers - Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers

IEC/TR 61292-5 Ed. 1.0

Optical amplifiers - Part 5: Polarization mode dispersion parameter - General information

IEC/TR 61292-6 Ed. 1.0

Optical amplifiers - Part 6: Distributed Raman amplification

IEC/TR 61292-7 Ed. 1.0

Optical amplifiers - Part 7: Four wave mixing effect in optical amplifiers

IEC/TR 61292-9 Ed. 1.0

Optical amplifiers - Part 9: Semiconductor optical amplifiers

IEC 61751 Ed. 1.0

Laser modules used for telecommunication - Reliability assessment

IEC 61753-072-6 Ed. 1.0

Fibre optic interconnecting devices and passive components - Performance standard - Part 072-6: Non-connectorised single mode wavelength switches for category O - Uncontrolled environment

IEC 61753-073-6 Ed. 1.0

Fibre optic interconnecting devices and passive components performance standard - Part 073-6: Non-connectorised medium scale single-mode MxN component spatial switches for category O - Outside plant environment

IEC 61757-1 Ed. 1.0

Fibre optic sensors - Part 1: Generic specification

IEC 61757-1 Ed. 2.0

Fibre optic sensors - Part 1: Generic specification

IEC 62007-1 Ed. 1.0

Semiconductor optoelectronic devices for fibre optic systems applications - Part 1: Essential ratings and characteristics

IEC 62007-1 Ed. 1.1

Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essential ratings and characteristics

IEC 62007-1 Ed. 2.0

Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics

IEC 62007-1 Ed. 3.0

Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics

IEC 62007-1 am1 Ed. 1.0

Amendment 1

IEC 62007-2 Ed. 1.0

Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods

IEC 62007-2 Ed. 1.1

Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods

IEC 62007-2 Ed. 2.0

Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods

IEC 62007-2 am1 Ed. 1.0

Amendment 1

IEC 62007-2 am2 Ed. 1.0

Measuring method for optical crosstalk of duplexer and diplexer modules

IEC 62148-1 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 1: General and guidance

MERGED 62148-1 Ed. 1.0

Discrete/Integrated optolectronic semiconductor devices for fibre optic communication - Part 1: Interface Standards, General and Guidance

IEC 62148-2 Ed. 2.0

Fibre optic active components and devices - Package and interface standards - Part 2: SFF 10-pin transceivers

IEC 62148-2 f1 Ed. 1.0

Basic standards for discrete/integrated optoelectronic semiconductor devices for fibre optic communications including hybrid devices - General and guidance interface classifications - Part 2: General and guidance for fibre optic receiver module interfaces

IEC 62148-2 fC1 Ed. 1.0

Corrigendum 1: Fibre optic active components and devices - Package and interface standards - Part 2: SFF MT-RJ 10-pin transceiver

IEC 62148-3 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 3: SFF MT-RJ 20-pin transceiver

IEC 62148-3 Ed. 2.0

Fibre optic active components and devices - Package and interface standards - Part 3: SFF 20-pin transceivers

IEC 62148-3 f1 Ed. 1.0

Basic standards for discrete/integrated optoelectronic semiconductor devices for fibre optic communications including hybrid devices - General and guidance interface classifications - Part 3: General and guidance for fibre optic transceiver module interfaces

IEC 62148-4 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers

DEL 62148-5 Ed. 1.0

Active optoelectronic devices - Package interface standards - Part 5: Interface standard for SC-SIP 9 pin fibre optic terminal device

IEC 62148-5 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 5: SC 1x9 fibre optic transceivers

IEC 62148-6 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers

IEC 62148-7 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers

IEC 62148-8 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 8: SFF LC 20-pin transceivers

IEC 62148-9 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers

IEC 62148-9 fC1 Ed. 1.0

Corrigendum 1: Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers

IEC 62148-10 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 10: SFF MU duplex 20-pin transceivers

IEC 62148-11 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters

IEC 62148-11 Ed. 2.0

Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin active device modules

IEC 62148-12 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector

IEC 62148-13 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 13: 12-channel pluggable, parallel optical transmitter and receiver modules with MPO optical connector

IEC 62148-14 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 14: Miniature pump laser diode.

IEC 62148-15 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages

IEC 62148-15 Ed. 2.0

Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages

IEC 62148-15 ff Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 15: Discrete vertical cavity surface emitting laser packages

IEC 62148-16 Ed. 1.0

Fibre optic active components and devices - Package and interface standards - Part 16: Transmitter and receiver components for use with LC connector interface

IEC 62148-17 Ed. 1.0

Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors

IEC 62148-17 ff1 Ed. 1.0

Fibre optic active components and devices: Package and interface standards - Part 17: Transmitter components with LC connectors and thermo-electric coolers

IEC 62148-18 Ed. 1.0

Fibre optic active components and devices: package and interface standards - Part 18: Receiver components with LC connectors and PIN or avalanche photodiodes

IEC 62148-19 Ed. 1.0

Fibre optic active components and devices: package and interface standards - Part 19: Receiver components with LC connectors and avalanche photodiodes

IEC 62149-1 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 1: General and guidance

IEC 62149-1 Ed. 2.0

Fibre optic active components and devices - Performance standards - Part 1: General and guidance

IEC 62149-1 fC1 Ed. 1.0

Corrigendum 1 - Fibre optic active components and devices - Performance standards - Part 1: General and guidance

DEL 62149-2 f1 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 2: Discrete vertical cavity surface emitting laser devices

IEC 62149-2 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

IEC 62149-2 Ed. 2.0

Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

IEC 62149-2 ff Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 2: 850 nm discrete vertical cavity surface emitting laser devices

IEC 62149-3 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters

IEC 62149-3 Ed. 2.0

Fibre optic active components and devices - Performance standards - Part 3: Modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems

IEC 62149-4 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 4: 1300 nm fibre optic transceivers for Gigabit Ethernet application

IEC 62149-4 Ed. 2.0

Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application

IEC 62149-4 fC1 Ed. 1.0

Corrigendum 1

IEC 62149-5 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-5 Ed. 2.0

Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs

IEC 62149-6 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers

IEC 62149-7 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 7: 1 310-nm discrete vertical cavity surface emitting laser devices

IEC 62149-8 Ed. 1.0

Fibre optic active components and devices - Performance standard - Part 8: Seeded reflective semiconductor optical amplifier devices

IEC 62149-9 Ed. 1.0

Fibre optic active components and devices - Performance standards - Part 9: Seeded reflective semiconductor optical amplifier transceivers

IEC 62150-1 Ed. 1.0

Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance

IEC 62150-2 Ed. 1.0

Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers

IEC 62150-2 Ed. 2.0

Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers

IEC 62150-3 Ed. 1.0

Fibre optic active components and devices - Test and measurement procedures - Part 3: Optical power variation induced by mechanical disturbance in optical receptacles and transceiver interfaces

IEC 62150-4 Ed. 1.0

Fibre optic active components and devices - Test and measurement procedures - Part 4: Relative intensity noise using a time-domain optical detection system

IEC 62343 Ed. 1.0

Dynamic modules and devices - General and guidance

IEC 62343-1-1 Ed. 1.0

Dynamic Modules - Performance Standard - Part 1-1: Single mode fibre optic dynamic channel equalizer with pigtails for use in controlled environments (Category C)

IEC 62343-1-2 Ed. 1.0

Dynamic modules - Part 1-2: Performance standards - Dynamic chromatic dispersion compensator with pigtails for use in controlled environments (Category C)

IEC 62343-1-3 Ed. 1.0

Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environments (Category C)

IEC 62343-1-3 Ed. 2.0

Dynamic modules - Part 1-3: Performance standards - Dynamic gain tilt equalizer (non-connectorized)

IEC 62343-2 Ed. 1.0

Dynamic modules - Part 2: Reliability qualification

IEC 62343-2 Ed. 2.0

Dynamic modules - Part 2: Reliability qualification

IEC 62343-3-1 Ed. 1.0

Dynamic modules - Part 3-1: Performance specification templates - Dynamic channel equalizers

IEC 62343-3-3 Ed. 1.0

Dynamic modules - Performance specification templates - Part 3-3: Wavelength selective switches

IEC 62343-5-1 Ed. 1.0

Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement

IEC/TR 62343-6-1 Ed. 1.0

Dynamic modules - Part 6-1: Dynamic channel equalizers

IEC/TR 62343-6-2 Ed. 1.0

Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results

IEC/TR 62343-6-2 Ed. 2.0

Dynamic modules - Part 6-2: Software and hardware interfaces - Survey results

IEC/TR 62343-6-3 Ed. 1.0

Dynamic modules - Part 6-3: Round robin measurement results for group delay ripple of tunable dispersion compensators

IEC/TR 62343-6-5 Ed. 1.0

Dynamic modules - Part 6-5: Investigation of operating mechanical shock and vibration tests for dynamic modules

IEC/TR 62343-6-6 Ed. 1.0

Dynamic modules - Part 6-6: Failure mode effect analysis for optical units of dynamic modules

IEC/TR 62343-6-8 Ed. 1.0

Dynamic modules - Part 6-8: Categorization study of dynamic performance requirements

IEC/TR 62572-2 Ed. 1.0

Fibre optic active components and devices - Reliability standards - Part 2: Laser module degradation

IEC 62572-3 Ed. 1.0

Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication

IEC 62572-3 Ed. 2.0

Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication