International Standards and Conformity Assessment
for all electrical, electronic and related technologies
SC 65B |
Measurement and control devices |

Project Reference | Current Stage | Language | Frcst Date | CLC | Document Reference | Downloads |
|---|---|---|---|---|---|---|
PNW 65B-433 Ed. 1.0IEC 61131: Programmable controllers - Part X: Functional safety
| DEL
| E | 65B/433 | |||
IEC 65B-739 Ed. 1.0Sampling and Conditioning Natural Gas for Custody Transfer Analysis | MERGED
| E | 65B/739 | |||
PNW 65B-745 Ed. 1.0Methods for calculating the main static performance specification of transducers and transmitters for use in process measurement and control systems | DEL
| E | 2010-11 | 65B/745 | ||
PNW 65D-43 Ed. 1.0Revision of IEC 60746-2: Expression of performance of electrochemical analyzers - Part 2: pH value | DEL
| E | 65D/43 | |||
PNW 65D-95 Ed. 1.0Breath Alcohol Analyzers | DEL
| E | 65D/95 | |||
PNW 65b-509 Ed. 1.0Industrial process control valves - Interface between valve and positioner - Control valves with lifting actuator | DEL
| E | 65B/509A | |||
PNW 65b-529 Ed. 1.0Sizing equations for fluid flow through multistage control valves under installed conditions - With trims of the continuous resistance type (no interstage recovery)
| MERGED
| E | 65B/529 | |||
PNW 65b-561 Ed. 1.0IEC 60534-2-6: Industrial-process control valves - Part 2-6: Flow capacity - Sizing equations for multi-phase fluid flow under installed conditions | DEL
| E | 65B/561 | |||
PNW 65b-724 Ed. 1.0Industrial inspecting thermal imagers | DEL
| E | 65B/724 | |||
IEC 60528 Ed. 1.0Expression of performance of air quality infra-red analyzers | PPUB
| B | Webstore | |||
IEC 60534-1 Ed. 2.0Industrial-process control valves - Part 1: Control valve terminology and general considerations | DELPUB
| B | ||||
IEC 60534-1 Ed. 3.0Industrial-process control valves - Part 1: Control valve terminology and general considerations | PPUB
| B | yes | Webstore | ||
IEC 60534-2 Ed. 1.0Industrial-process control valves. Part 2: Flow capacity.
Section One: Sizing equations for incompressible fluid flow
under installed conditions
| DELPUB
| B | ||||
IEC 60534-2 Ed. 2.0Systematic review of IEC 534-2 (1978)
| DEL
| B | ||||
IEC 60534-2-1 Ed. 1.0Industrial-process control valves - Part 2-1: Flow capacity -
Sizing equations for fluid flow under installed conditions
| DELPUB
| B | 1998-09 | yes | ||
IEC 60534-2-1 Ed. 2.0Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions | PPUB
| B | 2011-03 | yes | Webstore | |
IEC 60534-2-1 fC1 Ed. 1.0Corrigendum 1
| DELPUB
| B | ||||
IEC 60534-2-1 fF Ed. 1.0Industrial-process control valves - Part 2-1: Flow-capacity - Sizing equations for fluid flow under installed conditions | MERGED
| B | ||||
IEC 60534-2-2 Ed. 1.0Industrial-process control valves. Part 2: Flow capacity. Section Two: Sizing equations for compressible fluid flow under installed conditions | DELPUB
| B | ||||
IEC 60534-2-3 Ed. 1.0Industrial-process control valves. Part 2: Flow capacity. Section Three: Test procedures | DELPUB
| B | ||||
IEC 60534-2-3 Ed. 2.0Industrial-process control valves - Part 2-3: Flow capacity -Test procedures | PPUB
| B | yes | Webstore | ||
IEC 60534-2-3 Ed. 3.0Industrial-process control valves - Part 2-3: Flow capacity - Test procedures | AMW
| E | 2014-06 | yes | 65B/827 | |
IEC 60534-2-4 Ed. 1.0Industrial-process control valves. Part 2: Flow capacity. Section Four: Inherent flow characteristics and rangeability | DELPUB
| B | ||||
IEC 60534-2-4 Ed. 2.0Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability | PPUB
| B | 2009-05 | yes | Webstore | |
IEC 60534-2-4 ff1 Ed. 2.0Systematic review of IEC 534-2-4 (1989) | MERGED
| B | ||||
IEC 60534-2-5 Ed. 1.0Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery | WPUB
| B | 2003-09 | yes | ||
IEC 60534-2-5 Ed. 2.0Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery | CAN
| E | 2010-04 | yes | 65B/606 | |
IEC 60534-3 Ed. 1.0Industrial-process control valves. Part 3: Dimensions - Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves | WPUB
| B | ||||
IEC 60534-3-1 Ed. 1.0Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged,
two-way, globe-type, angle pattern control valves
| PPUB
| B | yes | Webstore | ||
IEC 60534-3-1 ff Ed. 1.0Industrial-process control valves - Part 3-1: Dimensions -
Face-to-face dimensions for flanged, two-way, globe-type,
straight pattern and centre-to-face dimensions for flanged,
two-way, globe-type, angle pattern control valves | MERGED
| B | ||||
IEC 60534-3-2 Ed. 1.0Industrial-process control valves. Part 3: Dimensions - Section Two - Face-to-face dimensions for flangeless control valves except wafer butterfly valves | DELPUB
| B | ||||
IEC 60534-3-2 Ed. 2.0Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves
| PPUB
| B | yes | Webstore | ||
IEC 60534-3-3 Ed. 1.0Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves | PPUB
| B | yes | Webstore | ||
IEC 60534-4 Ed. 1.0Industrial-process control valves. Part 4: Inspection and routine testing | DELPUB
| B | ||||
IEC 60534-4 Ed. 2.0Industrial-process control valves - Part 4: Inspection and
routine testing
| DELPUB
| B | yes | |||
IEC 60534-4 Ed. 3.0Industrial-process control valves - Part 4: Inspection and routine testing | PPUB
| B | 2006-06 | yes | Webstore | |
IEC 60534-4 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60534-5 Ed. 1.0Industrial-process control valves. Part 5: Marking | DELPUB
| B | ||||
IEC 60534-5 Ed. 2.0Industrial-process control valves - Part 5: Marking | PPUB
| B | yes | Webstore | ||
IEC 60534-6 Ed. 1.0Industrial-process control valves. Part 6: Mounting details for
attachment of positioners to control valve actuators
| WPUB
| B | ||||
IEC 60534-6 Ed. 2.0Systematic review of IEC 534-6 (1985)
| DEL
| B | ||||
IEC 60534-6-1 Ed. 1.0Industrial-process control valves - Part 6: Mounting details for
attachment of positioners to control valves - Section 1:
Positioner mounting on linear actuators
| PPUB
| B | yes | Webstore | ||
IEC 60534-6-2 Ed. 1.0Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators | PPUB
| B | yes | Webstore | ||
IEC 60534-7 Ed. 1.0Industrial-process control valves. Part 7: Control valve data sheet | DELPUB
| B | ||||
IEC 60534-7 Ed. 2.0Industrial-process control valves - Part 7: Control valve data sheet | PPUB
| B | 2010-10 | yes | Webstore | |
IEC 60534-7 f1 Ed. 2.0Systematic review of IEC 534-7 (1989) | MERGED
| B | ||||
IEC 60534-8-1 Ed. 1.0Industrial-process control valves. Part 8: Noise considerations. Section One: Laboratory measurement of noise generated by aerodynamic flow through control valves | DELPUB
| B | ||||
IEC 60534-8-1 Ed. 2.0Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves | PPUB
| B | yes | Webstore | ||
IEC 60534-8-2 Ed. 1.0Industrial-process control valves - Part 8: Noise considerations
- Section 2: Laboratory measurement of noise generated by
hydrodynamic flow through control valves
| DELPUB
| B | ||||
IEC 60534-8-2 Ed. 2.0Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves | PPUB
| B | 2011-10 | yes | Webstore | |
IEC 60534-8-2 f1 Ed. 2.0Systematic review of IEC 534-8-2 (1991)
| MERGED
| B | ||||
IEC 60534-8-3 Ed. 1.0Industrial-process control valves - Part 8: Noise considerations - Section 3: Control valve aerodynamic noise prediction method | DELPUB
| B | 2010-11 | yes | ||
IEC 60534-8-3 Ed. 2.0Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method | DELPUB
| B | 2000-06 | yes | ||
IEC 60534-8-3 Ed. 3.0Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method | PPUB
| B | 2010-11 | yes | Webstore | |
IEC 60534-8-3 f2 Ed. 2.0Extension of hydrodynamic noise prediction method for control
valves
| MERGED
| E | 65B/305 | |||
IEC 60534-8-4 Ed. 1.0Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow | DELPUB
| B | yes | |||
IEC 60534-8-4 Ed. 2.0Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow | PPUB
| B | yes | Webstore | ||
IEC 60534-8-4 Ed. 3.0Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow
| AMW
| E | 2014-06 | yes | 65B/829 | |
IEC 60534-8-4 fC1 Ed. 2.0Corrigendum 1 - Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow | PPUB
| B | Webstore | |||
IEC 60534-9 Ed. 1.0Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs | PPUB
| B | 2007-09 | yes | Webstore | |
IEC 60534-9 fC1 Ed. 1.0Corrigendum 1 - Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs | PPUB
| B | Webstore | |||
IEC 60546-1 Ed. 2.0Controllers with analogue signals for use in industrial-process control systems. Part 1: Methods of evaluating the performance | DELPUB
| B | ||||
IEC 60546-1 Ed. 3.0Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance | PPUB
| B | 2010-07 | yes | Webstore | |
IEC 60546-2 Ed. 1.0Controllers with analogue signals for use in industrial-process control systems. Part 2: Guidance for inspection and routine testing | DELPUB
| B | ||||
IEC 60546-2 Ed. 2.0Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing | PPUB
| B | 2010-07 | yes | Webstore | |
IEC 60584-1 Ed. 1.0Thermocouples. Part 1: Reference tables | DELPUB
| B | ||||
IEC 60584-1 Ed. 2.0Thermocouples - Part 1: Reference tables | PPUB
| B | yes | Webstore | ||
IEC 60584-1 Ed. 3.0Thermocouples - Part 1: E.M.F specifications and tolerances | DEC
| B | 2013-08 | yes | ||
IEC 60584-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60584-2 Ed. 1.0Thermocouples. Part 2: Tolerances | PPUB
| B | Webstore | |||
IEC 60584-2 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60584-3 Ed. 1.0Thermocouples. Part 3: Extension and compensating cables - Tolerances and identification system | DELPUB
| B | ||||
IEC 60584-3 Ed. 2.0Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system | PPUB
| B | 2007-12 | yes | Webstore | |
IEC 60584-3 f1 Ed. 2.0Systematic review of IEC 584-3 (1989) | MERGED
| B | ||||
IEC 60584-3 am1 Ed. 1.0Amendment to IEC 60584-3 - Thermocouple - Part 3: Extension and compensanting cables - tolerances and identification system | DELPUB
| E | 2000-01 | yes | ||
IEC 60584-3 am1 f2 Ed. 1.0Amendment No. 2 to IEC 584-3: Extension and compensating cables - Tolerances and identification system | MERGED
| E | 65B(DE)56 | |||
IEC 60584-3 am1 f3 Ed. 1.0Amendment No. 3 to IEC 584-3 | MERGED
| E | 65B(DE)57 | |||
IEC 60584-3 am1 f4 Ed. 1.0Amendment to IEC 584-3 - Inclusion of type B thermocouples | MERGED
| E | 65B(FR)34 | |||
IEC/TR 60668 Ed. 1.0Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments | PPUB
| B | Webstore | |||
IEC 60746-1 Ed. 1.0Expression of performance of electrochemical analyzers. Part 1: General | DELPUB
| B | ||||
IEC 60746-1 Ed. 2.0Expression of performance of electrochemical analyzers - Part 1: General | PPUB
| B | yes | Webstore | ||
IEC 60746-1 fF Ed. 2.0Expression of performance of electrochemical analyzers - Part 1: General | MERGED
| F | 2012-06 | |||
DEL 60746-2 Ed. 2.0Revision of IEC 60746-2: Expression of performance of electrochemical analyzers - Part 2: pH value | DEL
| E | yes | |||
IEC 60746-2 Ed. 1.0Expression of performance of electrochemical analyzers. Part 2: pH value | DELPUB
| B | ||||
IEC 60746-2 Ed. 2.0Expression of performance of electrochemical analyzers - Part 2: pH value | PPUB
| B | yes | Webstore | ||
IEC 60746-2 fC1 Ed. 2.0Corrigendum 1 | PPUB
| E | Webstore | |||
IEC 60746-2 fC2 Ed. 2.0Corrigendum 2 | PPUB
| E | Webstore | |||
IEC 60746-2 fF Ed. 2.0Expression of performance of electrochemical analyzers - Part 2: pH value | MERGED
| F | 2012-06 | |||
IEC 60746-3 Ed. 1.0Expression of performance of electrochemical analyzers. Part 3: Electrolytic conductivity | DELPUB
| B | ||||
IEC 60746-3 Ed. 2.0Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity | PPUB
| B | yes | Webstore | ||
IEC 60746-3 fC1 Ed. 2.0Corrigendum 1 | PPUB
| E | Webstore | |||
IEC 60746-3 fC2 Ed. 1.0Corrigendum 2 | DEL
| E | ||||
IEC 60746-3 fF Ed. 2.0Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity | MERGED
| F | 2012-08 | |||
DEL 60746-4 Ed. 2.0Revision of IEC 746-4 | DEL
| E | 65D(IT)1 | |||
IEC 60746-4 Ed. 1.0Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors | PPUB
| B | Webstore | |||
IEC 60746-5 Ed. 1.0Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential | PPUB
| B | Webstore | |||
IEC 60746-5 f1 Ed. 2.0Revision of IEC 746-5 | DEL
| E | 65D(IT)2 | |||
IEC 60746-5 f2 Ed. 2.0Expression of performance of electrochemical analyzers - Part 5B: rH value | DEL
| E | 65D(IT)3 | |||
DEL 60746-6 Ed. 1.0Expression of performance of electrochemical analysers - Part 6: Conductivity effect of foreign ions in ultrapure waters, from combined conductivity and pH | DEL
| E | 65D(IT)5 | |||
IEC 60751 Ed. 1.0Industrial platinum resistance thermometer sensors | DELPUB
| B | ||||
IEC 60751 Ed. 2.0Industrial platinum resistance thermometers and platinum temperature sensors | PPUB
| B | 2008-06 | yes | Webstore | |
IEC 60751 f1 Ed. 2.0Industrial platinum resistance thermometers | MERGED
| E | yes | |||
IEC 60751 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60751 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | 1995-07 | yes | ||
IEC 60770 Ed. 1.0Methods of evaluating the performance of transmitters for use in industrial-process control systems | DELPUB
| B | ||||
IEC 60770-1 Ed. 1.0Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation | DELPUB
| B | 1999-02 | yes | ||
IEC 60770-1 Ed. 2.0Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation | PPUB
| B | 2010-07 | yes | Webstore | |
DEL 60770-2 Ed. 2.0Systematic review of IEC 770-2 (1989) | DEL
| B | ||||
IEC 60770-2 Ed. 1.0Transmitters for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing | DELPUB
| B | ||||
IEC 60770-2 Ed. 2.0Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
| DELPUB
| E | 2003-03 | yes | ||
IEC 60770-2 Ed. 3.0Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing | PPUB
| B | 2010-10 | yes | Webstore | |
IEC 60770-3 Ed. 1.0Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters | PPUB
| E | 2006-03 | yes | Webstore | |
IEC 60770-3 Ed. 2.0Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters | ADIS
| B | 2013-05 | yes | 65B/828 | |
IEC 60873 Ed. 1.0Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems | WPUB
| B | ||||
IEC 60873-1 Ed. 1.0Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation | PPUB
| B | yes | Webstore | ||
IEC 60873-1 fF Ed. 1.0Electrical and pneumatic analogue chart recorders for use in industrial-process systems - Part 1: Methods for performance evaluation | MERGED
| F | 2012-08 | |||
IEC 60873-2 Ed. 1.0Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing | PPUB
| E | yes | Webstore | ||
IEC/TR 60877 Ed. 1.0Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service | DELPUB
| B | ||||
IEC/TR 60877 Ed. 2.0Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service | PPUB
| B | Webstore | |||
IEC 61003-1 Ed. 1.0Industrial-process control systems - Instruments with analogue
inputs and two- or multi-state outputs - Part 1: Methods of
evaluating the performance
| DELPUB
| B | ||||
IEC 61003-1 Ed. 2.0Industrial-process control systems - Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance | PPUB
| E | no | Webstore | ||
IEC 61003-1 f1 Ed. 2.0Systematic review of IEC 1003-1 (1991)
| MERGED
| B | ||||
IEC 61003-2 Ed. 1.0Industrial-process control systems - Instruments with analogue inputs and two or multi-state outputs - Part 2: Guidance for inspection and routine testing | PPUB
| B | 2009-08 | yes | Webstore | |
IEC 61115 Ed. 1.0Expression of performance of sample handling systems for process analyzers | PPUB
| B | Webstore | |||
IEC 61115 Ed. 2.0Expression of performance of sample handling systems for process analyzers | CAN
| E | ||||
IEC 61131-1 Ed. 1.0Programmable controllers - Part 1: General information | DELPUB
| B | ||||
IEC 61131-1 Ed. 2.0Programmable controllers - Part 1: General information | PPUB
| B | yes | Webstore | ||
IEC 61131-1 fF Ed. 2.0Programmable controllers - Part 1: General information | MERGED
| F | 2012-01 | |||
IEC 61131-2 Ed. 1.0Programmable controllers - Part 2: Equipment requirements and tests | DELPUB
| B | ||||
IEC 61131-2 Ed. 2.0Programmable controllers - Part 2: Equipment requirements and tests
| DELPUB
| E | 2003-03 | yes | ||
IEC 61131-2 Ed. 3.0Programmable controllers - Part 2: Equipment requirements and tests | PPUB
| B | 2007-08 | yes | Webstore | |
IEC 61131-2 fC1 Ed. 2.0Corrigendum 1 - Programmable controllers - Part 2: Equipment requirements and tests | DELPUB
| E | ||||
IEC 61131-2 fF Ed. 3.0Programmable controllers - Part 2: Equipment requirements and tests | MERGED
| F | 2012-02 | |||
IEC 61131-2 am1 Ed. 1.0Amendment to Table 9 -Proximity switch interfaces- of IEC 1131-2 | MERGED
| E | 65B(US)59 | |||
IEC 61131-3 Ed. 1.0Programmable controllers - Part 3: Programming languages | DELPUB
| B | yes | |||
IEC 61131-3 Ed. 2.0Programmable controllers - Part 3: Programming languages | PPUB
| E | 1997-01 | yes | Webstore | |
IEC 61131-3 Ed. 3.0Programmable Controllers - Part 3: Programming Languages | BPUB
| B | 2013-02 | yes | ||
IEC/TR 61131-4 Ed. 1.0Programmable controllers - Part 4: User guidelines | DELPUB
| B | ||||
IEC/TR 61131-4 Ed. 2.0Programmable controllers - Part 4: User guidelines | PPUB
| E | no | Webstore | ||
IEC 61131-5 Ed. 1.0Programmable controllers - Part 5: Communications | PPUB
| B | yes | Webstore | ||
IEC 61131-5 fF Ed. 1.0Programmable controllers - Part 5: Communications | MERGED
| F | 2012-03 | |||
IEC 61131-6 Ed. 1.0Programmable controllers - Part 6: Functional safety | PPUB
| B | 2012-10 | yes | Webstore | |
IEC 61131-6 f1 Ed. 1.0Programmable controller communications via fieldbus | MERGED
| E | 65B(US)58 | |||
IEC 61131-7 Ed. 1.0Programmable controllers - Part 7: Fuzzy control programming | PPUB
| B | yes | Webstore | ||
IEC/TR 61131-8 Ed. 1.0Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages | DELPUB
| B | ||||
IEC/TR 61131-8 Ed. 2.0Programmable controllers - Part 8: Guidelines for the application and implementation of programming languages | PPUB
| E | no | Webstore | ||
IEC 61131-9 Ed. 1.0Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) | DEC
| B | 2013-08 | yes | ||
IEC 61152 Ed. 1.0Dimensions of metal-sheathed thermometer elements | PPUB
| B | Webstore | |||
IEC 61153 Ed. 1.0Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Guidance for inspection and routine testing | WPUB
| B | ||||
IEC 61207-1 Ed. 1.0Expression of performance of gas analyzers - Part 1: General | DELPUB
| B | yes | |||
IEC 61207-1 Ed. 2.0Expression of performance of gas analyzers - Part 1: General | PPUB
| B | 2010-05 | yes | Webstore | |
IEC 61207-2 Ed. 1.0Expression of performance of gas analyzers - Part 2: Oxygen in gas (utilizing high-temperature electrochemical sensors) | PPUB
| B | yes | Webstore | ||
IEC 61207-2 Ed. 2.0Expression of Performance of Gas Analyzers- Part 2- Oxygen in Gas (utilizing high-temperature electrochemical sensors) | AMW
| E | 2016-06 | yes | 65B/837 | |
IEC 61207-3 Ed. 1.0Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
| DELPUB
| B | yes | |||
IEC 61207-3 Ed. 2.0Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers | PPUB
| B | yes | Webstore | ||
IEC 61207-3 Ed. 3.0Expression of Performance of Gas Analyzers- Part 3- Paramagnetic Oxygen Analysers | AMW
| E | 2015-12 | yes | 65B/838 | |
IEC 61207-3 fC1 Ed. 2.0Corrigendum 1 | PPUB
| B | Webstore | |||
IEC 61207-3 fC2 Ed. 2.0Corrigendum 2 | PPUB
| B | Webstore | |||
IEC 61207-6 Ed. 1.0Expression of performance of gas analyzers - Part 6: Photometric analyzers | PPUB
| B | yes | Webstore | ||
IEC 61207-6 Ed. 2.0Expression of Performance of Gas Analyzers- Part 6- Photometric Analyzers | AMW
| E | 2014-08 | yes | 65B/839 | |
IEC 61207-7 Ed. 1.0Expression of performance of gas analyzers - Part 7: Tunable laser gas analyzers | ADIS
| B | 2013-06 | yes | ||
IEC 61285 Ed. 1.0Industrial-process control - Safety of analyzer houses | DELPUB
| B | yes | |||
IEC 61285 Ed. 2.0Industrial-process control - Safety of analyser houses | PPUB
| E | yes | Webstore | ||
IEC 61285 Ed. 3.0Industrial Process Control - Safety of Analyzer Houses | ACDV
| E | 2015-04 | yes | ||
IEC 61297 Ed. 1.0Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation | PPUB
| B | 1995-09 | yes | Webstore | |
IEC 61297 Ed. 2.0Industrial-process control systems - Classification of adaptive controllers for the purpose of evaluation | MERGED
| E | 2008-12 | yes | 65B/628 | |
IEC 61298-1 Ed. 1.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations | DELPUB
| B | 1995-07 | yes | ||
IEC 61298-1 Ed. 2.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations | PPUB
| B | 2008-10 | yes | Webstore | |
IEC 61298-2 Ed. 1.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions | DELPUB
| B | 1995-08 | yes | ||
IEC 61298-2 Ed. 2.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions | PPUB
| B | 2008-10 | yes | Webstore | |
IEC 61298-3 Ed. 1.0Process measurement and control devices - General methods and
procedures for evaluating performance - Part 3: Tests for the
effects of influence quantities
| DELPUB
| B | 1998-01 | yes | ||
IEC 61298-3 Ed. 2.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities | PPUB
| B | 2008-10 | yes | Webstore | |
IEC 61298-4 Ed. 1.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content | DELPUB
| B | 1995-07 | yes | ||
IEC 61298-4 Ed. 2.0Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content | PPUB
| B | 2008-10 | yes | Webstore | |
IEC 61499-1 Ed. 1.0Function blocks - Part 1: Architecture
| DELPUB
| E | 2005-06 | yes | ||
IEC 61499-1 Ed. 2.0Function blocks - Part 1: Architecture | PPUB
| B | 2012-11 | yes | Webstore | |
IEC 61499-2 Ed. 1.0Function blocks - Part 2: Software tool requirements | DELPUB
| E | 2005-06 | yes | ||
IEC 61499-2 Ed. 2.0Function blocks - Part 2: Software tool requirements | PPUB
| B | 2012-11 | yes | Webstore | |
IEC/TR 61499-3 Ed. 1.0Function blocks for industrial-process measurement and control systems - Part 3: Tutorial information | WPUB
| E | 2005-02 | 65/308 | ||
IEC 61499-4 Ed. 1.0Function blocks - Part 4: Rules for compliance profiles | DELPUB
| E | 2006-02 | yes | 65/349 | |
IEC 61499-4 Ed. 2.0Function blocks - Part 4: Rules for compliance profiles | PPUB
| B | 2013-02 | yes | Webstore | |
IEC 61514 Ed. 1.0Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
| PPUB
| B | yes | Webstore | ||
IEC 61514-2 Ed. 1.0Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs | PPUB
| B | yes | Webstore | ||
IEC 61514-2 Ed. 2.0Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs
| RDIS
| B | 2013-07 | yes | ||
IEC 61514-2 ff Ed. 1.0Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs | MERGED
| F | ||||
IEC 61515 Ed. 1.0Mineral insulated thermocouple cables and thermocouples | PPUB
| B | yes | Webstore | ||
IEC 61515 Ed. 2.0Mineral insulated cables and thermocouples | AMW
| E | 2014-03 | yes | 65B/820 | |
DEL/TR 61516 Ed. 1.0Calibration procedures for temperature sensors | DEL
| E | 65B/379 | |||
IEC 61517 Ed. 1.0Temperature sensors: System uncertainties and measurement errors | DEL
| E | 65B(Sec.)188 | |||
IEC 61518 Ed. 1.0Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) | PPUB
| E | yes | Webstore | ||
IEC 61518 fF Ed. 1.0Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) | MERGED
| B | ||||
IEC 61520 Ed. 1.0Metal thermowells for thermometer sensors - Functional dimensions | PPUB
| B | yes | Webstore | ||
DEL/TS 61521 Ed. 1.0Outline of temperature and temperature measurement | DEL
| E | 65B(U.K.)71 | |||
DEL/TS 61522-1 Ed. 1.0Temperature measurement - Guide to the selection and use of thermocouples | DEL
| E | 65B(U.K.)72 | |||
DEL/TS 61522-2 Ed. 1.0Temperature measurement - Guide to selection and use of temperature/time indicators | DEL
| E | 65B(U.K.)73 | |||
DEL/TS 61522-3 Ed. 1.0Temperature measurement - Guide to selection and use of radiation pyrometers for use in scientific and industrial environments | DEL
| E | 65B(U.K.)74 | |||
DEL/TS 61522-4 Ed. 1.0Temperature measurement - Guide to selection and use of dial-type expansion thermometers | DEL
| E | 65B(U.K.)75 | |||
DEL/TS 61522-5 Ed. 1.0Temperature measurement - Guide to selection and use of industrial resistance thermometers | DEL
| E | 65B(U.K.)76 | |||
IEC/TR 61831 Ed. 1.0On-line analyser systems - Guide to design and installation
| DELPUB
| B | 1999-11 | |||
IEC/TR 61831 Ed. 2.0On-line analyser systems - Guide to design and installation | PPUB
| E | 2011-09 | no | Webstore | |
IEC/TR 61832 Ed. 1.0Analyser systems - Guide to technical enquiry and bid evaluation
| PPUB
| B | Webstore | |||
IEC/TR 61832 Ed. 2.0Analyser Systems - Guide to Technical Enquiry and Bid Evaluation | AMW
| E | yes | 65B/841 | ||
IEC 61870 Ed. 1.0Recommended practice for environmental monitoring | DEL
| E | 65D/17 | |||
DEL 61987-1 Ed. 1.0Industrial-process measurement and control: data structures and elements in process equipment catalogues - Part 1: measuring equipment with analogue and digital output
| DEL
| B | yes | |||
IEC/PAS 61987-1 Ed. 1.0Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output | DELPUB
| E | 65B/454 | |||
IEC 61987-21 Ed. 1.0List of Properties (LOP) of process control valves for electronic data exchange - Generic structures
| ANW
| E | 2014-12 | 65B/790 | ||
IEC 61987-22 Ed. 1.0Lists of Properties (LOP) of control valves and actuators for electronic data exchange | ANW
| E | 2014-12 | 65B/790 | ||
IEC/TR 62010 Ed. 1.0Analyser systems - Guidance for maintenance management | PPUB
| E | Webstore | |||
IEC/TR 62010 Ed. 2.0Analyser Systems - Guidance for Maintenance Managemen | AMW
| E | no | 65B/842 | ||
IEC/TS 62098 Ed. 1.0Evaluation methods for microprocessor-based instruments - | PPUB
| B | 1999-12 | Webstore | ||
IEC/TS 62098 ff Ed. 1.0Evaluation methods for microprocessor- based instruments | MERGED
| B | ||||
IEC 62254 Ed. 1.0Expression of performance of process analyzers for nephelometric measurement of turbidity and optical density | DEL
| E | 65D/57 | |||
IEC/TR 62268 Ed. 1.0Expression of performance of in-situ analyzers | DEL
| E | 65D/61 | |||
IEC/TR 62269 Ed. 1.0Chemometrics for process instrumentation | DEL
| E | ||||
IEC/TR 62322 Ed. 1.0Specification for radiation thermometers
| CAN
| E | 65B/409 | |||
IEC 62339 f1 Ed. 1.0Process Analysis Sampling System Modular Component Interfaces for Surface-Mount Fluid Distribution Components with Elastomeric Seals | MERGED
| E | 65D/75 | |||
IEC 62339-1 Ed. 1.0Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals | PPUB
| B | 2006-12 | yes | Webstore | |
IEC 62339-1 fF Ed. 1.0Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals | MERGED
| F | 2012-06 | |||
IEC/PAS 62339-1 Ed. 1.0Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals | DELPUB
| E | 65D/99 | |||
IEC/TR 62432 Ed. 1.0The rH index in aqueous and aqueous-organic media | PPUB
| E | 2006-03 | no | Webstore | |
IEC/TR 62434 Ed. 1.0pH measurements in difficult media - Definitions, standards and procedures | PPUB
| E | 2006-03 | no | Webstore | |
IEC/TR 62456 Ed. 1.0An electrochemical reference system for use in different solvent media - The decamethylated ferricinium/ferrocene redox couple | PPUB
| E | 2006-11 | no | Webstore | |
IEC 62460 Ed. 1.0Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations
| PPUB
| B | 2008-06 | yes | Webstore | |
IEC/TS 62492-1 Ed. 1.0Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers | PPUB
| B | 2008-05 | no | Webstore | |
IEC/TS 62492-2 Ed. 1.0Industrial process control devices - Radiation thermometers -
Part 2: Determination of the technical data for radiation thermometers
| APUB
| E | 2014-02 | no | ||
IEC 62594-1 Ed. 1.0Electrical pressure measuring instruments - Pressure transmitters, pressure measuring instruments - Part 1: Definitions, specifications on the data sheets | CAN
| E | 2010-04 | |||
IEC/TS 62603-1 Ed. 1.0Industrial process control systems - Guidelines for Process Control Systems - Part 1: Specifications | ACDV
| B | 2013-04 | yes | ||
IEC 62703 Ed. 1.0Expression of performance of fluorometric oxygen analyzers in liquid media | RDIS
| B | 2013-05 | yes | ||
IEC 62723 Ed. 1.0Sampling and Conditioning Natural Gas for Custody Transfer Analysis | ANW
| E | 2014-03 | 65B/772 | ||
IEC 62828 Ed. 1.0Reference conditions and procedures for industrial measurement transmitters | ANW
| E | 2014-12 | 65B/816 | ||
IEC/TR 62829 Ed. 1.0Chemometrics for Process Analytical Technologies | ANW
| E | 2015-11 | 65B/812 | ||
ISO/IEC 9506-5 Ed. 1.0Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers | WPUB
| B | 1997-03 | |||
ISO/IEC 9506-6 Ed. 1.0Industrial automation systems - Manufacturing message specification - Part 6: Companion Standard for Process Control | WPUB
| B |



