PNW 48D-133 Ed. 1.0

Additional adjustable pitch-hole in IEC 60297: Defined mounting structures (racks)

PNW 48D-286 Ed. 1.0

Connector dependent interface dimensions for subracks and plug-in units

PNW 48D-478 Ed. 1.0

IEC 61587-X Ed.1.0: Mechanical structures for electronic equipment - Part X: Interface dimensions for cooling devices in cabinets

PNW 48D-528 Ed. 1.0

Mechanical structures for electronic equipment-Safety requirements for mechanical lock

PNW 48D-530 Ed. 1.0

IEC 62610-X: Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part x: Guideline of cooling performance evaluation for indoor cabinets

PNW 48D-531 Ed. 1.0

IEC 61587-X: Mechanical structures for electronic equipment - Part x: Security and performance for door locking handles for indoor cabinets

IEC 60297-1 Ed. 3.0

Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1: Panels and racks

IEC 60297-2 Ed. 1.0

Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 2: Cabinets and pitches of rack structures

IEC 60297-3 Ed. 1.0

Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 3: Subracks and associated plug-in units

IEC 60297-3 am1 Ed. 1.0

Amendment No. 1

IEC 60297-3-100 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets

IEC 60297-3-101 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units

IEC 60297-3-101 fF Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units

IEC 60297-3-102 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle

IEC 60297-3-102 fF Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle

IEC 60297-3-103 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin

IEC 60297-3-104 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units

IEC 60297-3-105 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis

IEC 60297-3-106 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or racks in accordance with IEC 60917-2-1

IEC 60297-3-107 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor

IEC 60297-3-108 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-108: Dimensions of ruggedized subracks and plug-in units

IEC 60297-4 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions

IEC 60297-4 Ed. 1.1

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 4: Subracks and associated plug-in units - Additional dimensions

IEC 60297-4 am1 Ed. 1.0

Amendment 1

IEC 60297-5-100 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units - Design overview

IEC 60297-5-101 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units - Injector/extractor handle

IEC 60297-5-102 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units - Electromagnetic shielding provision

IEC 60297-5-103 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units - Electrostatic discharge protection

IEC 60297-5-104 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units - Keying

IEC 60297-5-105 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units - Alignment and/or earth pin

IEC 60297-5-106 Ed. 1.0

Plug-in unit/subrack grounding for subracks and associated plug-in units with extended features added to IEC 60297-3 and IEC 60297-4

IEC 60297-5-107 Ed. 1.0

Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units - Rear-mounted plug-in units

IEC 60297-6 Ed. 1.0

Restructuring of IEC 60297-3, 60297-4 and 48D/119/CD (possible IEC 60297-5) into a sectional and detail standard

IEC 60297-6-1 Ed. 1.0

Restructuring of IEC 60297-3, 60297-4 and 48D/119/CD (possible IEC 60297-5) into sectional and detail standards

IEC 60916 Ed. 1.0

Mechanical structures for electronic equipment - Terminology

IEC 60916 Ed. 2.0

Systematic review of IEC 916 (1988)

IEC 60917 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices

IEC 60917-0 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 0: Guide for the users of IEC 917

IEC 60917-0 Ed. 2.0

Systematic review of IEC 917-0 (1989)

IEC 60917 am1 Ed. 1.0

Amendment No. 1

IEC 60917-1 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard

IEC 60917-1 Ed. 1.1

Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard

IEC 60917-1 am1 Ed. 1.0

Amendment 1

IEC 60917-2 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice

IEC 60917-2-1 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabinets and racks

IEC 60917-2-2 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units

IEC 60917-2-3 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units

IEC 60917-2-4 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 2-4: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in)

IEC 60917-2-5 Ed. 1.0

Modular order for the development of mechanical structures for electronic equipment practices - Part 2-5: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Cabinet interface dimensions for miscellaneous equipment

IEC 61587-1 Ed. 1.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis

IEC 61587-1 Ed. 2.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1: Climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis

IEC 61587-1 Ed. 3.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 1: Environmental requirements, test set-up and safety aspects for cabinets, racks, subracks and chassis under indoor conditions

IEC 61587-2 Ed. 1.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 2: Seismic tests for cabinets and racks

IEC 61587-2 Ed. 2.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and 60297 - Part 2: Seismic tests for cabinets and racks

IEC 61587-3 Ed. 1.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks

IEC 61587-3 Ed. 2.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297- Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks

IEC/TS 61587-3 Ed. 1.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic shielding performance tests for cabinets, racks and subracks

IEC 61587-4 Ed. 1.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 series - Part 4: Combination of performance levels for modular cabinets

IEC 61587-5 Ed. 1.0

Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 5: Seismic tests for chassis, subracks, and associated plug-in units

IEC 61969-1 Ed. 1.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines

IEC 61969-1 Ed. 2.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 1: Design guidelines

IEC 61969-2 Ed. 1.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Sectional specification - Coordination dimensions for cases and cabinets

IEC 61969-2 Ed. 2.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions

IEC 61969-2-1 Ed. 1.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-1: Detail specification - Dimensions for cabinets

IEC 61969-2-1 Ed. 2.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-1: Detail specification - Dimensions for cabinets

IEC 61969-2-2 Ed. 1.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-2: Detail specification - Dimensions for cases

IEC 61969-2-2 Ed. 2.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 2-2: Detail specification - Dimensions for cases

IEC 61969-3 Ed. 1.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Sectional specification - Climatic, mechanical tests and safety aspects for cabinets and cases

IEC 61969-3 Ed. 2.0

Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects

IEC 62194 Ed. 1.0

Method of evaluating the thermal performance of enclosures

IEC/TS 62454 Ed. 1.0

Mechanical structures for electronic equipment - Design guide: Interface dimensions and provisions for water cooling of electronic equipment within cabinets of the IEC 60297 and IEC 60917 series

IEC/TS 62610-1 Ed. 1.0

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance wit IEC 60297 and IEC 60917 series - Part 1: Design guide: Interface dimension and provision for thermoelectrical cooling systems (Peltier effect)

IEC/TS 62610-2 Ed. 1.0

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 2: Design guide: Method for determination of forced air-cooling structure

IEC/TS 62610-3 Ed. 1.0

Mechanical structures for electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 3: Design guide: Evaluation method for thermoelectrical cooling systems (Peltier effect)

IEC 62610-4 Ed. 1.0

Mechanical structures for electronic equipment - Thermal management - Part 4: Cooling performance tests for water supplied heat exchangers in electronic cabinets