International Standards and Conformity Assessment for all electrical, electronic and related technologies

SC 48B

Electrical connectors

 
export to xls file

SC 48B Project files (459)

sort up

Project

Reference

sort upsort down

Current

Stage

sort upsort down
Language
sort upsort down

Frcst

Date

sort upsort down
CLC

Document

Reference

Downloads
PNW 48B-454 Ed. 1.0

IEC 512 - Test 14x: Tightness of high pressure water
DEL
  • DEL
  • Deleted items
E48B/454
PNW 48B-455 Ed. 1.0

IEC 512 - Test 16x: Contact force, resilient female contacts
DEL
  • DEL
  • Deleted items
E48B/455
PNW 48B-529 Ed. 1.0

Detail specification for cable connector system, with assessed quality - 15 mm mounting pitch - with integrated shielding function, having a basic grid of 2,5 mm in accordance with IEC 917
DEL
  • DEL
  • Deleted items
E48B/529
PNW 48B-545 Ed. 1.0

IEC 512, Test 14a: Sealing (gross air leakage)
DEL
  • DEL
  • Deleted items
E48B/545
PNW 48B-563 Ed. 1.0

Revision of IEC 603-7: Detail specification for connectors, 8-way, keyed version, including fixed and free connectors with common mating features, with assessed quality
DEL
  • DEL
  • Deleted items
E48B/563
PNW 48B-698 Ed. 1.0

Rectangular connectors, 4 and 8 ways, fully shielded,cable-to-cable and cable-to-board arrangements for use in analogue and digital high-speed data applications with aband-width of minimum 600 MHz
DEL
  • DEL
  • Deleted items
E48B/698
PNW 48B-707 Ed. 1.0

IEC 60603-7-X: Detail specification for connectors, 8-way, keyed version, including fixed and free connectors with common mating features, with assessed quality
DEL
  • DEL
  • Deleted items
E48B/707
PNW 48B-719 Ed. 1.0

Rectangular connectors, 2,4 and 8 way, fully shielded, cable-to-cable and cable-to-board arrangements for use in analogue and digital high-speed data applications with a bandwidth of minimum 600 MHz
DEL
  • DEL
  • Deleted items
E48B/719
PNW 48B-727 Ed. 1.0

Specification for small form factor 45.7 mm (1.8 in) disk drives
DEL
  • DEL
  • Deleted items
E48B/727
PNW 48B-728 Ed. 1.0

Specification for small form factor 33.0 mm (1.3 in) disk drives
DEL
  • DEL
  • Deleted items
E48B/728
PNW 48B-729 Ed. 1.0

Specification for small form factor 45.7 mm (1.8 in) disk drives, 15 mm (0.59 in) high
DEL
  • DEL
  • Deleted items
E48B/729
PNW 48B-730 Ed. 1.0

Specification for small form factor 63.5 mm (2.5 in) disk drives
DEL
  • DEL
  • Deleted items
E48B/730
PNW 48B-738 Ed. 1.0

Standardization of design of connecting hardware, 4 and 8 way shielded for cable-to-cable and cable-to-board arrangements, for use in analogue and digital high speed applications, Class F, with minimum bandwidth 600 MHz
DEL
  • DEL
  • Deleted items
E48B/738
PNW 48B-762 Ed. 1.0

Basic testing procedures and measuring methods - Test: Fretting corrosion
DEL
  • DEL
  • Deleted items
E48B/762
PNW 48B-802 Ed. 1.0

Rectangular multimedia connector, 2, 4 and 8 way, fully shielded, cable-to-cable and cable-to-board arrangements with a bandwidth of up to 1400 MHz and higher
DEL
  • DEL
  • Deleted items
E48B/802
PNW 48B-1107 Ed. 1.0

Proposal for a detail specification for high speed serial data connector-2 (HSSDC-2) 7 position cable to board connector with 1,27 mm centerline contacts
DEL
  • DEL
  • Deleted items
E48B/1107
PNW 48B-1341 Ed. 1.0

60603-7-3: Screened 8-Way Connectors for Frequencies up to 100MHz
DEL
  • DEL
  • Deleted items
E48B/1341
PNW 48B-1840 Ed. 1.0

IEC 61076-3-1xx Ed. 1.0: Connectors for electronic equipment - Product requirements - Part 3-1xx: Rectangular connector : Detail specification for an interface for 4 pair balanced, individually shielded, fixed and free connectors with a characteristic impedance of 100 Ohms, covering a frequency range from DC to 2300 MHz
DEL
  • DEL
  • Deleted items
E48B/1840
PNW 48B-2233 Ed. 1.0

Connectors for electronics equipment - Part 2-111: Circular connectors - Detail specification for plug and jack for 2 mm barrel-type battery charging interface
DEL
  • DEL
  • Deleted items
E2012-0748B/2233
PNW 48B-2352 Ed. 1.0

IEC 61076-3-1XX/Ed1: Connectors for electronic equipment - Product requirements - Part 3-1xx: rectangular connectors - detail specification for unshielded, free and fixed 10 way connectors with push-pull coupling for industrial environments with frequencies up to 100 mhz
DEL
  • DEL
  • Deleted items
E2015-0648B/2352
PNW 48B-2402 Ed. 1.0

IEC 61076-3-122/Ed1: Detail specification for rugged 8-way, shielded, free and fixed connectors.
PNW
  • PNW
  • Proposed New Work
E2017-0148B/2402
DEL 60068-2-42 Ed. 3.0

Systematic review of IEC 68-2-42 (1982)
DEL
  • DEL
  • Deleted items
B
IEC 60068-2-42 Ed. 2.0

Environmental testing - Part 2-42: Tests. Test Kc: Sulphur dioxide test for contacts and connections
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60068-2-42 Ed. 3.0

Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
PPUB
  • PPUB
  • Publication issued
B2003-06yesWebstore
DEL 60068-2-43 Ed. 2.0

Systematic review of IEC 68-2-43 (1976)
DEL
  • DEL
  • Deleted items
B
IEC 60068-2-43 Ed. 1.0

Environmental testing - Part 2-43: Tests. Test Kd: Hydrogen sulphide test for contacts and connections
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60068-2-43 Ed. 2.0

Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections
PPUB
  • PPUB
  • Publication issued
B2003-06yesWebstore
DEL 60068-2-46 Ed. 2.0

Systematic review of IEC 68-2-46 (1982)
DEL
  • DEL
  • Deleted items
B
IEC 60068-2-46 Ed. 1.0

Environmental testing - Part 2-46: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60068-2-49 Ed. 1.0

Environmental testing - Part 2-49: Tests. Guidance to Test Kc: Sulphur dioxide test for contacts and connections
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60068-2-49 Ed. 2.0

Systematic review of IEC 68-2-49 (1983)
DEL
  • DEL
  • Deleted items
B
IEC 60130-0 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 0: Guide to drawing information in detail specifications
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60130-0 Ed. 2.0

Systematic review of IEC 60130-0 (1970)
DEL
  • DEL
  • Deleted items
B
IEC 60130-1 Ed. 2.0

Connectors for frequencies below 3 MHz. Part 1: General requirements and measuring methods
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60130-1 Ed. 3.0

Systematic review of IEC 130-1 (1988)
DEL
  • DEL
  • Deleted items
B
IEC 60130-2 Ed. 2.0

Connectors for frequencies below 3 MHz. Part 2: Connectors for radio receivers and associated sound equipment
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-2 Ed. 3.0

Systematic review of IEC 60130-2 (1965)
DEL
  • DEL
  • Deleted items
B
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-3 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 3: Battery connectors
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-3 Ed. 2.0

Systematic review of IEC 60130-3 (1965)
DEL
  • DEL
  • Deleted items
B
IEC 60130-4 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 4: Circular multipole connectors with threaded coupling
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-4 Ed. 2.0

Systematic review of IEC 60130-4 (1966)
DEL
  • DEL
  • Deleted items
B
IEC 60130-5 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 5: Rectangular multipole connectors with blade contacts
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-5 Ed. 2.0

Systematic review of IEC 60130-5 (1966)
DEL
  • DEL
  • Deleted items
B
IEC 60130-6 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 6: Rectangular miniature multipole connectors with blade contacts
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-6 Ed. 2.0

Systematic review of IEC 60130-6 (1965)
DEL
  • DEL
  • Deleted items
B
IEC 60130-7 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 7: Circular multipole connectors with bayonet or push-pull coupling
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-7 Ed. 2.0

Systematic review of IEC 60130-7 (1971)
DEL
  • DEL
  • Deleted items
B
IEC 60130-8 Ed. 2.0

Connectors for frequencies below 3 MHz. Part 8: Concentric connectors for audio circuits in radio receivers
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-8 Ed. 3.0

Systematic review of IEC 60130-8 (1976)
DEL
  • DEL
  • Deleted items
B
IEC 60130-9 Ed. 2.0

Connectors for frequencies below 3 MHz. Part 9: Circular connectors for radio and associated sound equipment
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60130-9 Ed. 3.0

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
DELPUB
  • DELPUB
  • Deleted Publication
B2000-04yes
IEC 60130-9 Ed. 4.0

Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
PPUB
  • PPUB
  • Publication issued
B2011-03yesWebstore
DELPUB
  • DELPUB
  • Deleted Publication
B
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60130-10 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-10 Ed. 2.0

Systematic review of IEC 60130-10 (1971)
DEL
  • DEL
  • Deleted items
B
IEC 60130-11 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 11: Edge socket connectors with closed ends and having a contact spacing of 2.54 mm (0.1 in) mating either with board mounted connectors or printed wiring boards with edge board contacts
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60130-11 Ed. 2.0

Systematic review of IEC 60130-11 (1971)
DEL
  • DEL
  • Deleted items
B
IEC 60130-12 Ed. 2.0

Connectors for frequencies below 3 MHz. Part 12: Link and test connectors
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-12 Ed. 3.0

Systematic review of IEC 60130-12 (1976)
DEL
  • DEL
  • Deleted items
B
IEC 60130-15 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 15: Ultra-miniature board-mounted printed- wiring connectors having a staggered contact spacing of 1.27 mm (0.05 in)
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60130-15 Ed. 2.0

Systematic review of IEC 60130-15 (1975)
DEL
  • DEL
  • Deleted items
B
IEC 60130-16 Ed. 1.0

Connectors for frequencies below 3 MHz. Part 16: Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54 mm (0.1 in)
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-16 Ed. 2.0

Systematic review of IEC 60130-16 (1976)
DEL
  • DEL
  • Deleted items
B
IEC 60130-17 Ed. 1.0

Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
PPUB
  • PPUB
  • Publication issued
B1996-09Webstore
IEC 60130-4A Ed. 1.0

Connectors for frequencies below 3 MHz - Part 4: Circular multipole connectors with threaded coupling - First supplement
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60130-11A Ed. 1.0

Connectors for frequencies below 3 MHz - Part 11 - First supplement: Multi-row board mounted printed circuit connectors having contact and termination spacing on a 2.54 mm (0.1 in) square grid
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-1 Ed. 1.0

Socket and accessories for electronic plug-in devices - Part 1: General requirements and methods of test
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-1 Ed. 2.0

Systematic review of IEC 60149-1 (1963)
DEL
  • DEL
  • Deleted items
B
WPUB
  • WPUB
  • Publication withdrawn
B
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2 Ed. 1.0

Sockets and accessories for electronic plug-in devices - Part 2: Specification sheets for sockets and dimensions of wiring jigs and pin straighteners
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2 Ed. 2.0

Systematic review of IEC 60149-2 (1965)
DEL
  • DEL
  • Deleted items
B
IEC 60149-3 Ed. 1.0

Sockets and accessories for electronic plug-in devices - Part 3: Sockets for crystal holders
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-3 Ed. 2.0

Systematic review of IEC 60149-3 (1975)
DEL
  • DEL
  • Deleted items
B
IEC 60149-2A Ed. 1.0

First supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2B Ed. 1.0

Second supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2C Ed. 1.0

Third supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2D Ed. 1.0

Fourth supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2E Ed. 1.0

Fifth supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2F Ed. 1.0

Sixth supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2G Ed. 1.0

Seventh supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2H Ed. 1.0

Eighth supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2J Ed. 1.0

Ninth supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2K Ed. 1.0

Tenth supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-2L Ed. 1.0

Eleventh supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60149-3A Ed. 1.0

First supplement
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60203 Ed. 1.0

Dimensions of the crimp area of machined crimp type contacts
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60203 Ed. 2.0

Systematic review of IEC 60203 (1966)
DEL
  • DEL
  • Deleted items
B
IEC 60288-1 Ed. 1.0

Tube and valve shields - Part 1: General requirements and methods of test
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60288-1 Ed. 2.0

Systematic review of IEC 60288-1 (1969)
DEL
  • DEL
  • Deleted items
B
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60288-2 Ed. 1.0

Tube and valve shields - Part 2: Specification sheets for shields for tubes and valves and dimensions of testing devices and gauges for shields
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60288-2 Ed. 2.0

Systematic review of IEC 60288-2 (1969)
DEL
  • DEL
  • Deleted items
B
IEC 60352-1 Ed. 2.0

Solderless connections. Part 1: Solderless wrapped connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60352-1 Ed. 3.0

Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B1996-12yesWebstore
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60352-2 Ed. 1.0

Solderless connections. Part 2: Solderless crimped connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60352-2 Ed. 2.0

Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B2006-03yesWebstore
IEC 60352-2 am1 Ed. 1.0

Amendment No. 1
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60352-2 am1 Ed. 2.0

Amendment 1 - Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B2013-06yesWebstore
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60352-3 Ed. 1.0

Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60352-4 Ed. 1.0

Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
ByesWebstore
PPUB
  • PPUB
  • Publication issued
B2002-01yesWebstore
IEC 60352-5 Ed. 1.0

Solderless connections - Part 5: Solderless press-in connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
Byes48B(C.O.)254
IEC 60352-5 Ed. 2.0

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
B2001-03yes
IEC 60352-5 Ed. 2.1

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60352-5 Ed. 3.0

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
B2008-01yes
IEC 60352-5 Ed. 4.0

Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B2012-02yesWebstore
BPUB
  • BPUB
  • Publication being printed
B
IEC 60352-5 am1 Ed. 2.0

Amendment 1 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
DELPUB
  • DELPUB
  • Deleted Publication
B2003-11yes
IEC 60352-6 Ed. 1.0

Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B1997-12yesWebstore
IEC 60352-7 Ed. 1.0

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B1999-12yesWebstore
IEC 60352-7 fF Ed. 1.0

Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
MERGED
  • MERGED
  • Merged project
B
IEC 60352-8 Ed. 1.0

Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance
PPUB
  • PPUB
  • Publication issued
B2011-02yesWebstore
IEC 60512-1 Ed. 3.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60512-1 Ed. 4.0

Connectors for electronic equipment - Tests and measurements - Part 1: General
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-1-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-1-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-1-3 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General examination - Section 3: Test 1c - Electrical engagement length
PPUB
  • PPUB
  • Publication issued
E1996-03yesWebstore
IEC 60512-1-4 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 1: General - Section 4: Test 1d: Contact protection effectiveness (scoop-proof)
PPUB
  • PPUB
  • Publication issued
B1994-02yesWebstore
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60512-1-100 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60512-1-100 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
DELPUB
  • DELPUB
  • Deleted Publication
B2006-03yes
IEC 60512-1-100 Ed. 3.0

Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
PPUB
  • PPUB
  • Publication issued
B2012-02yesWebstore
IEC 60512-1-101 Ed. 1.0

Connectors for electronic equipment - Basic testing and measurements - Part 1-101: Blank detail specification
ADIS
  • ADIS
  • Approved for FDIS circulation
B2014-09no
IEC 60512-2 Ed. 2.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-2 am1 Ed. 2.0

Amendment No. 1
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-2-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-2-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-2-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-2-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-2-6 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-3 Ed. 1.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-3 Ed. 2.0

Revision of IEC 60512-3 (1976)
DEL
  • DEL
  • Deleted items
B
IEC 60512-3-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-4 Ed. 1.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-4 Ed. 2.0

Revision of IEC 60512-4 (1976)
DEL
  • DEL
  • Deleted items
B
IEC 60512-4-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-4-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-4-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-5 Ed. 2.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-5-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-5-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-6 Ed. 2.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-6 Ed. 3.0

Revision of IEC 60512-6 (1984)
DEL
  • DEL
  • Deleted items
B
IEC 60512-6-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-6-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-6-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-6-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal)
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-6-5 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 6: Dynamic stress tests - Section 5: Test 6e: Random vibration
PPUB
  • PPUB
  • Publication issued
B1998-01yesWebstore
IEC 60512-7 Ed. 3.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-7-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60512-7-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact
PPUB
  • PPUB
  • Publication issued
B2011-11yesWebstore
IEC 60512-8 Ed. 3.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-8-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-8-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial
PPUB
  • PPUB
  • Publication issued
B2011-04yesWebstore
IEC 60512-8-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever
PPUB
  • PPUB
  • Publication issued
B2011-05yesWebstore
IEC 60512-8-3 f1 Ed. 1.0

Test 8c: Robustness of actuator lever and/or end stop
MERGED
  • MERGED
  • Merged project
E
DEL 60512-9 Ed. 3.0

Revision of IEC 60512-9 Ed.2
MERGED
  • MERGED
  • Merged project
B
IEC 60512-9 Ed. 2.0

Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
WPUB
  • WPUB
  • Publication withdrawn
B
IEC 60512-9-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60512-9-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature
PPUB
  • PPUB
  • Publication issued
B2011-12yesWebstore
IEC 60512-9-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load
DELPUB
  • DELPUB
  • Deleted Publication
B2006-02yes
IEC 60512-9-3 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load
PPUB
  • PPUB
  • Publication issued
B2011-07yesWebstore
IEC 60512-9-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing)
PPUB
  • PPUB
  • Publication issued
B2011-04yesWebstore
IEC 60512-9-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60512-10-4 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 10: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Section 4: Test 10d: Electrical overload (connectors)
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60512-10-4 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)
PPUB
  • PPUB
  • Publication issued
B2003-09yesWebstore
IEC 60512-11-1 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
PPUB
  • PPUB
  • Publication issued
B1996-01Webstore
IEC 60512-11-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-6 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-7 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 7: Test 11g: Flowing mixed gas corrosion test
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60512-11-7 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
PPUB
  • PPUB
  • Publication issued
B2003-06yesWebstore
IEC 60512-11-8 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust
PPUB
  • PPUB
  • Publication issued
B1995-10Webstore
IEC 60512-11-9 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-10 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-11 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-12 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-13 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-14 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 14: Test 11p: Flowing single gas corrosion test
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60512-11-14 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
PPUB
  • PPUB
  • Publication issued
B2003-04yesWebstore
IEC 60512-11-14 ff Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test
MERGED
  • MERGED
  • Merged project
B2011-09
IEC 60512-12-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
PPUB
  • PPUB
  • Publication issued
B2006-04yesWebstore
IEC 60512-12-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
PPUB
  • PPUB
  • Publication issued
B2004-05yesWebstore
IEC 60512-12-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
PPUB
  • PPUB
  • Publication issued
B2004-05yesWebstore
IEC 60512-12-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
PPUB
  • PPUB
  • Publication issued
B2004-05yesWebstore
IEC 60512-12-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
PPUB
  • PPUB
  • Publication issued
B2004-05yesWebstore
IEC 60512-12-6 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering
PPUB
  • PPUB
  • Publication issued
B2006-09yesWebstore
IEC 60512-12-7 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method
PPUB
  • PPUB
  • Publication issued
B2002-01yesWebstore
IEC 60512-13-1 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 13: Mechanical operating tests - Section 1: Test 13a: Engaging and separating forces
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 60512-13-1 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
PPUB
  • PPUB
  • Publication issued
B2004-04yesWebstore
IEC 60512-13-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
PPUB
  • PPUB
  • Publication issued
B2004-05yesWebstore
IEC 60512-13-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
PPUB
  • PPUB
  • Publication issued
B2004-05yesWebstore
IEC 60512-14-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
PPUB
  • PPUB
  • Publication issued
B2006-04yesWebstore
IEC 60512-14-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof
PPUB
  • PPUB
  • Publication issued
B2006-04yesWebstore
IEC 60512-14-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
PPUB
  • PPUB
  • Publication issued
B2006-04yesWebstore
IEC 60512-14-6 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
PPUB
  • PPUB
  • Publication issued
B2006-04yesWebstore
IEC 60512-14-7 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing test - Section 7: Test 14g: Impacting water
PPUB
  • PPUB
  • Publication issued
B1996-09yesWebstore
IEC 60512-15-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-6 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-7 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-15-8 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application
PPUB
  • PPUB
  • Publication issued
B2006-09yesWebstore
IEC 60512-16-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage
PPUB
  • PPUB
  • Publication issued
B2008-06yesWebstore
IEC 60512-16-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry
PPUB
  • PPUB
  • Publication issued
B2008-06yesWebstore
IEC 60512-16-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections)
PPUB
  • PPUB
  • Publication issued
B2008-06yesWebstore
IEC 60512-16-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-6 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-7 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-8 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections)
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-16-9 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-16-11 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-16-13 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-16-14 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-16 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-17 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-16-18 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
PPUB
  • PPUB
  • Publication issued
B2008-05yesWebstore
IEC 60512-16-20 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)
PPUB
  • PPUB
  • Publication issued
B2006-09yesWebstore
IEC 60512-16-21 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses
PPUB
  • PPUB
  • Publication issued
B2012-04yesWebstore
IEC 60512-17-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-17-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation
PPUB
  • PPUB
  • Publication issued
B2011-05yesWebstore
IEC 60512-17-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile)
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-17-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-17-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 17-5: Cable clamping tests - Test 17e: Cable clamp resistance to dynamic cable pull
DEL
  • DEL
  • Deleted items
E2011-0348B/1997
IEC 60512-19-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60512-19-3 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 19: Chemical resistance tests - Section 3: Test 19c - Fluid resistance
PPUB
  • PPUB
  • Publication issued
EyesWebstore
IEC 60512-20-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-20-2 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness
PPUB
  • PPUB
  • Publication issued
B1995-10yesWebstore
IEC 60512-20-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-21-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-22-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-23-1 Ed. 1.0

Test 23a: Shielding effectiveness of connectors (100 MHz to 1 GHz) using a transfer impedance method
DEL
  • DEL
  • Deleted items
E48B(Sec.)326
IEC 60512-23-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60512-23-3 Ed. 1.0

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
PPUB
  • PPUB
  • Publication issued
ByesWebstore
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60512-23-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-23-4 Ed. 2.0

Maintenance cycle report on IEC 60512-23-4: Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain
DEL
  • DEL
  • Deleted items
E2004-07yes48B/1280
IEC 60512-23-5 Ed. 1.0

Test methods for 8 way connectors (e.g. IEC 60603-7) up to 600 MHz
DEL
  • DEL
  • Deleted items
E48B/661
IEC 60512-23-7 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-24-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60512-25-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-1 Ed. 2.0

Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
DEL
  • DEL
  • Deleted items
E2005-10yes
IEC 60512-25-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss)
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-5 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-6 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-7 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
PPUB
  • PPUB
  • Publication issued
ByesWebstore
IEC 60512-25-8 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-8: Test 25h: Balance of symmetrical signals
DEL
  • DEL
  • Deleted items
E2007-1248B/1503
IEC 60512-25-9 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk
PPUB
  • PPUB
  • Publication issued
B2008-09yesWebstore
IEC 60512-26-1 Ed. 1.0

Connectors for electronic equipment - Tests and measurements ­ Part 26-1: General requirements for measurement setup associated with tests 26a to 26f
MERGED
  • MERGED
  • Merged project
E2007-06
IEC 60512-26-2 Ed. 1.0

Connectors for electronic equipment - Tests and measurements ­ Part 26-2: tests 26a, 26b, 26c, 26d, 26e and 26f: Connector measurements up to 250 MHz
MERGED
  • MERGED
  • Merged project
E2007-06
IEC 60512-26-3 Ed. 1.0

Connectors for electronic equipment - Tests and measurements ­ Part 26-3: Test arrangement up to 250 MHz associated with tests 26a to 26f
MERGED
  • MERGED
  • Merged project
E2007-06
IEC 60512-26-4 Ed. 1.0

Connectors for electronic equipment - Tests and measurements ­ Part 26-4: Reference arrangement up to 250 MHz associated with tests 26a to 26f
MERGED
  • MERGED
  • Merged project
E2007-12
IEC 60512-26-100 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60512-26-100 Ed. 1.1

Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60512-26-100 am1 Ed. 1.0

Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
PPUB
  • PPUB
  • Publication issued
B2011-04yesWebstore
IEC 60512-27-100 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g
PPUB
  • PPUB
  • Publication issued
B2011-12yesWebstore
IEC 60512-28-100 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g
PPUB
  • PPUB
  • Publication issued
B2013-02yesWebstore
IEC 60512-29-100 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g
ADIS
  • ADIS
  • Approved for FDIS circulation
B2014-09yes
IEC 60512-99-001 Ed. 1.0

Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power
PPUB
  • PPUB
  • Publication issued
B2012-06yesWebstore
IEC 60603-1 Ed. 2.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality
PPUB
  • PPUB
  • Publication issued
BWebstore
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-2 Ed. 2.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 2: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with common mounting features
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60603-2 Ed. 3.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
PPUB
  • PPUB
  • Publication issued
B1995-11Webstore
PPUB
  • PPUB
  • Publication issued
B1996-10Webstore
IEC 60603-3 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (0.100 in) centres and staggered terminations at that same spacing
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-3 Ed. 2.0

Systematic review of IEC 603-3 (1987)
DEL
  • DEL
  • Deleted items
B
IEC 60603-4 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres and staggered terminations at that same spacing
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-4 Ed. 2.0

Systematic review of IEC 603-4 (1987)
DEL
  • DEL
  • Deleted items
B
IEC 60603-5 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-5 Ed. 2.0

Systematic review of IEC 603-5 (1987)
DEL
  • DEL
  • Deleted items
B
IEC 60603-6 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double sided printed boards of 1.6 mm (0.063 in) nominal thickness
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-6 Ed. 2.0

Systematic review of IEC 603-6 (1987)
DEL
  • DEL
  • Deleted items
B
IEC 60603-7 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60603-7 Ed. 2.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
DELPUB
  • DELPUB
  • Deleted Publication
B1996-11yes
IEC 60603-7 Ed. 3.0

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
PPUB
  • PPUB
  • Publication issued
B2008-07yesWebstore
IEC 60603-7 Ed. 3.1

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-7 am1 Ed. 3.0

Amendment 1 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
PPUB
  • PPUB
  • Publication issued
B2011-10yesWebstore
IEC 60603-7 am2 Ed. 3.0

Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
1CD
  • 1CD
  • 1st Committee Draft
Eyes
IEC 60603-7-1 Ed. 1.0

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality
DELPUB
  • DELPUB
  • Deleted Publication
B2002-02yes
IEC 60603-7-1 Ed. 2.0

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
DELPUB
  • DELPUB
  • Deleted Publication
B2009-06yes
IEC 60603-7-1 Ed. 3.0

Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
PPUB
  • PPUB
  • Publication issued
B2011-05yesWebstore
DEL 60603-7-2 Ed. 1.0

Amendment to IEC 60603-7: Detail specification for 8 way connectors, with assessed quality, including fixed and free connectors with common mounting features; test methods and related requirements for use at frequencies up to 100 MHz
MERGED
  • MERGED
  • Merged project
Byes
IEC 60603-7-2 Ed. 1.0

Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
DELPUB
  • DELPUB
  • Deleted Publication
B2007-03yes
IEC 60603-7-2 Ed. 2.0

Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60603-7-3 Ed. 1.0

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
DELPUB
  • DELPUB
  • Deleted Publication
B2008-02yes
IEC 60603-7-3 Ed. 2.0

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC/PAS 60603-7-3 Ed. 1.0

Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
DELPUB
  • DELPUB
  • Deleted Publication
E2004-0748B/1394
IEC 60603-7-4 Ed. 1.0

Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
DELPUB
  • DELPUB
  • Deleted Publication
B2005-02yes
IEC 60603-7-4 Ed. 2.0

Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60603-7-5 Ed. 1.0

Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
DELPUB
  • DELPUB
  • Deleted Publication
B2007-03yes
IEC 60603-7-5 Ed. 2.0

Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC 60603-7-7 Ed. 1.0

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded)
DELPUB
  • DELPUB
  • Deleted Publication
Eyes
IEC 60603-7-7 Ed. 2.0

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz
DELPUB
  • DELPUB
  • Deleted Publication
E2006-06yes
IEC 60603-7-7 Ed. 3.0

Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
PPUB
  • PPUB
  • Publication issued
B2010-06yesWebstore
IEC 60603-7-41 Ed. 1.0

Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
PPUB
  • PPUB
  • Publication issued
B2010-03yesWebstore
IEC 60603-7-51 Ed. 1.0

Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz
PPUB
  • PPUB
  • Publication issued
B2010-03yesWebstore
IEC 60603-7-71 Ed. 1.0

Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz
PPUB
  • PPUB
  • Publication issued
B2010-07yesWebstore
IEC 60603-7-81 Ed. 1.0

Connectors for electronic equipment - Part 7-81: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz
ACDV
  • ACDV
  • Draft approved for Committee Draft with Vote
E2016-08
IEC 60603-7-82 Ed. 1.0

Connectors for electronic equipment - Part 7-82: Detail specification for 8-way, shielded, individual pair shielded, free and fixed connectors, for data transmission with frequencies up to 2 000 mhz
2CD
  • 2CD
  • 2nd Committee Draft
E2015-09
IEC 60603-8 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-8 Ed. 2.0

Systematic review of IEC 603-8 (1991)
DEL
  • DEL
  • Deleted items
B
IEC 60603-9 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards. Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-9 Ed. 2.0

Systematic review of IEC 603-9 (1990)
DEL
  • DEL
  • Deleted items
B
IEC 60603-10 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-10 Ed. 2.0

Systematic review of IEC 60603-10 (1991)
DEL
  • DEL
  • Deleted items
B
IEC 60603-11 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-11 Ed. 2.0

Systematic review of IEC 60603-11 (1992)
DEL
  • DEL
  • Deleted items
B
IEC 60603-12 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-13 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60603-14 Ed. 1.0

Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
PPUB
  • PPUB
  • Publication issued
B1997-09Webstore
IEC 60603-15 Ed. 1.0

Detail specification - Two part connectors for printed boards for basic grid of 2,0 mm with square contacts
DEL
  • DEL
  • Deleted items
E48B/426
IEC 60760 Ed. 2.0

Flat, quick-connect terminations
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 60760 am1 Ed. 2.0

Amendment No. 1
DELPUB
  • DELPUB
  • Deleted Publication
B1993-06
IEC 60807-1 Ed. 2.0

Rectangular connectors for frequencies below 3 MHz - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications for connectors with assessed quality
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60807-1 Ed. 3.0

Systematic review of IEC 807-1 (1991)
DEL
  • DEL
  • Deleted items
B
IEC 60807-2 Ed. 2.0

Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types
PPUB
  • PPUB
  • Publication issued
BWebstore
PPUB
  • PPUB
  • Publication issued
B1996-04Webstore
IEC 60807-3 Ed. 1.0

Rectangular connectors for frequencies below 3 MHz. Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60807-3 Ed. 2.0

Systematic review of IEC 807-3 (1990)
DEL
  • DEL
  • Deleted items
B
IEC 60807-6 Ed. 1.0

Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors with size 20 (7.5 A) round contacts having polarized guides - Fixed solder contact types
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60807-6 Ed. 2.0

Systematic review of IEC 807-6 (1988)
DEL
  • DEL
  • Deleted items
B
IEC 60807-7 Ed. 1.0

Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60807-7 Ed. 2.0

Systematic review of IEC 60807-7 (1991)
DEL
  • DEL
  • Deleted items
B
IEC 60807-8 Ed. 1.0

Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60807-8 am1 Ed. 1.0

Amendment to IEC 807-8 - Additional testing
DEL
  • DEL
  • Deleted items
E48B(Sec.)345
IEC 60807-9 Ed. 1.0

Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 60807-10 Ed. 1.0

Detail specification for rectangular hybrid connectors with trapezoidal shaped shells, with assessed quality, with non-removable contacts, solder and accessible insulation displacement terminations
DEL
  • DEL
  • Deleted items
E48B(NL)109
IEC 61076-1 Ed. 1.0

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 61076-1 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 1: Generic specification
PPUB
  • PPUB
  • Publication issued
B2006-05yesWebstore
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 61076-1 am1 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 1: Generic specification
1CD
  • 1CD
  • 1st Committee Draft
Eyes
DELPUB
  • DELPUB
  • Deleted Publication
Byes
IEC 61076-2 Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification
DELPUB
  • DELPUB
  • Deleted Publication
B1999-01yes
IEC 61076-2 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
PPUB
  • PPUB
  • Publication issued
B2011-07yesWebstore
IEC 61076-2-001 Ed. 1.0

Connectors for electronic equipment - Part 2-001: Circular connectors - Blank detail specification
DELPUB
  • DELPUB
  • Deleted Publication
B2001-11yes
IEC 61076-2-001 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
PPUB
  • PPUB
  • Publication issued
B2011-07yesWebstore
IEC 61076-2-100 Ed. 1.0

Detail specification for circular power connectors for low frequencies, for use with loudspeakers, amplifiers and sound equipment
DEL
  • DEL
  • Deleted items
E48B(Sec.)246
IEC 61076-2-101 Ed. 1.0

Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
DELPUB
  • DELPUB
  • Deleted Publication
B2003-11yes
IEC 61076-2-101 Ed. 1.1

Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 61076-2-101 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
DELPUB
  • DELPUB
  • Deleted Publication
B2008-07yes
IEC 61076-2-101 Ed. 3.0

Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
PPUB
  • PPUB
  • Publication issued
B2012-03yesWebstore
IEC 61076-2-101 fC1 Ed. 2.0

Corrigendum 1 - Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 61076-2-101 fF Ed. 1.0

Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
MERGED
  • MERGED
  • Merged project
F
IEC 61076-2-101 am1 Ed. 1.0

Amendment 1 - Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
DELPUB
  • DELPUB
  • Deleted Publication
B2006-02yes
IEC 61076-2-102 Ed. 1.0

Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply
PPUB
  • PPUB
  • Publication issued
B2003-02yesWebstore
IEC 61076-2-103 Ed. 1.0

Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')
PPUB
  • PPUB
  • Publication issued
B2001-05yesWebstore
IEC 61076-2-104 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
PPUB
  • PPUB
  • Publication issued
B2008-04yesWebstore
IEC 61076-2-104 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
BPUB
  • BPUB
  • Publication being printed
B2014-09yes
IEC 61076-2-105 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
PPUB
  • PPUB
  • Publication issued
B2008-08yesWebstore
IEC 61076-2-106 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67
PPUB
  • PPUB
  • Publication issued
B2011-07yesWebstore
IEC 61076-2-107 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
PPUB
  • PPUB
  • Publication issued
B2010-05yesWebstore
IEC/PAS 61076-2-107 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking
DELPUB
  • DELPUB
  • Deleted Publication
E2007-1248B/1790B
IEC/PAS 61076-2-108 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-108: Circular connectors - Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101
WPUB
  • WPUB
  • Publication withdrawn
E2009-0648B/1975
IEC 61076-2-109 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors with M 12 x 1 screw-locking, for data transmission frequencies up to 500 MHz
PPUB
  • PPUB
  • Publication issued
B2014-04yesWebstore
IEC/PAS 61076-2-109 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz
PPUB
  • PPUB
  • Publication issued
E2010-03Webstore
IEC 61076-2-110 Ed. 1.0

IEC 61076-2-110 Ed 1.0: Connectors for electronic equipment - Product requirements- part 2-xxx: Circular connectors - Detail specification for M12 x 1 circular connectors with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/sec
MERGED
  • MERGED
  • Merged project
E2012-1148B/2097A
IEC/PAS 61076-2-110 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s
PPUB
  • PPUB
  • Publication issued
E2010-03Webstore
IEC 61076-2-111 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors M12 with screw-locking
CDM
  • CDM
  • Committee Draft to be discussed at Meeting
E2014-03
IEC 61076-2-112 Ed. 1.0

Connectors for electronic equipment - Product requirements - Circular connectors, Detail specification for M12 power connectors up to12 Amps with screw-locking
MERGED
  • MERGED
  • Merged project
E2014-09
IEC 61076-2-113 Ed. 1.0

Connectors for electronic equipment - Product requirements - Circular connectors, Detail specification for data/power connectors with M12 screw-locking
CDM
  • CDM
  • Committee Draft to be discussed at Meeting
E2015-06
IEC 61076-3 Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification
DELPUB
  • DELPUB
  • Deleted Publication
E1999-11yes
IEC 61076-3 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
PPUB
  • PPUB
  • Publication issued
B2008-06yesWebstore
IEC 61076-3 f1 Ed. 2.0

IEC 61076-3, Ed.2: Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
MERGED
  • MERGED
  • Merged project
Eyes48B/1703
IEC 61076-3-001 Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality - Blank detail specification
DELPUB
  • DELPUB
  • Deleted Publication
E1999-11yes
IEC 61076-3-001 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
PPUB
  • PPUB
  • Publication issued
B2008-06yesWebstore
IEC 61076-3-001 f1 Ed. 2.0

IEC 61076-3-001, Ed.2: Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
MERGED
  • MERGED
  • Merged project
Eyes48B/1705
IEC 61076-3-100 Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
PPUB
  • PPUB
  • Publication issued
B1998-01yesWebstore
IEC 61076-3-101 Ed. 1.0

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
PPUB
  • PPUB
  • Publication issued
B1997-07yesWebstore
IEC 61076-3-101 fC1 Ed. 1.0

Corrigendum 1 - Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 61076-3-102 Ed. 1.0

Detail specification for rectangular connectors having three contacts, for use in audio/video and other applications
DEL
  • DEL
  • Deleted items
Eyes
IEC 61076-3-103 Ed. 1.0

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
PPUB
  • PPUB
  • Publication issued
B1998-12yesWebstore
IEC 61076-3-103 ff Ed. 1.0

Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)
MERGED
  • MERGED
  • Merged project
F
IEC 61076-3-104 Ed. 1.0

Connectors for electronic equipment - Part 3-104: Rectangular connectors - Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum
DELPUB
  • DELPUB
  • Deleted Publication
Eyes
IEC 61076-3-104 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz
PPUB
  • PPUB
  • Publication issued
B2006-08yesWebstore
IEC 61076-3-104 Ed. 3.0

Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz
2CD
  • 2CD
  • 2nd Committee Draft
E2014-06yes
IEC 61076-3-104 ff Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1 000 MHz
MERGED
  • MERGED
  • Merged project
B2013-05
IEC/PAS 61076-3-104 Ed. 1.0

Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum
DELPUB
  • DELPUB
  • Deleted Publication
E48B/1167
IEC 61076-3-105 Ed. 1.0

Connectors for electronic equipment - Part 3-105: Detail specification for 4 pair balanced, individually shielded, fixed and free connectors with a characteristic impedance of 100 ohms, covering a frequency range from DC to 1500 MHz
DEL
  • DEL
  • Deleted items
B2006-12yes
IEC 61076-3-106 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface
PPUB
  • PPUB
  • Publication issued
B2006-09yesWebstore
IEC 61076-3-107 Ed. 1.0

Connectors for electronic equipment - Part 3-107: Detail specification for shielded rectangular connectors for universal serial bus plus power connector(s), Series "A"
DEL
  • DEL
  • Deleted items
E2004-09
IEC 61076-3-108 Ed. 1.0

Connectors for electronic equipment - Detail specification for shielded rectangular connectors for universal serial bus plus power connector(s), series "B"
DEL
  • DEL
  • Deleted items
E2004-12
IEC 61076-3-109 Ed. 1.0

Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529
CAN
  • CAN
  • Draft cancelled
E
IEC/PAS 61076-3-109 Ed. 1.0

Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529
WPUB
  • WPUB
  • Publication withdrawn
E48B/1106
IEC 61076-3-110 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz
DELPUB
  • DELPUB
  • Deleted Publication
B2007-12yes
IEC 61076-3-110 Ed. 2.0

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz
PPUB
  • PPUB
  • Publication issued
B2012-04yesWebstore
IEC 61076-3-110 Ed. 3.0

Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz
2CD
  • 2CD
  • 2nd Committee Draft
E2016-02yes
IEC/PAS 61076-3-110 Ed. 1.0

Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz
DELPUB
  • DELPUB
  • Deleted Publication
E2002-0648B/1115
IEC 61076-3-111 Ed. 1.0

Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, frequencies up to 250 MHz
CAN
  • CAN
  • Draft cancelled
E
IEC/PAS 61076-3-111 Ed. 1.0

Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
WPUB
  • WPUB
  • Publication withdrawn
E48B/1174
IEC 61076-3-112 Ed. 1.0

Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment
PPUB
  • PPUB
  • Publication issued
B2006-05yesWebstore
IEC 61076-3-113 Ed. 1.0

Connectors for electronic equipment - Part 3-113: Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates
DEL
  • DEL
  • Deleted items
E2005-09
IEC 61076-3-114 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
PPUB
  • PPUB
  • Publication issued
B2009-05yesWebstore
IEC/PAS 61076-3-114 Ed. 1.0

Connectors for electronic equipment - Part 3-114: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
DELPUB
  • DELPUB
  • Deleted Publication
E2005-1148B/1517
IEC 61076-3-115 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type
PPUB
  • PPUB
  • Publication issued
B2009-06yesWebstore
IEC/PAS 61076-3-115 Ed. 1.0

Connectors for electronic equipment - Part 3-115: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type
DELPUB
  • DELPUB
  • Deleted Publication
E2005-1148B/1518
IEC 61076-3-116 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever
PPUB
  • PPUB
  • Publication issued
B2008-09yesWebstore
IEC/PAS 61076-3-116 Ed. 1.0

Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp
DELPUB
  • DELPUB
  • Deleted Publication
E2005-1148B/1519
IEC 61076-3-117 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling
PPUB
  • PPUB
  • Publication issued
B2009-05yesWebstore
IEC/PAS 61076-3-117 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 - Variant 14 related to IEC 61076-3-106 - Push-pull coupling
DELPUB
  • DELPUB
  • Deleted Publication
E2006-1148B/1655
IEC 61076-3-118 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
PPUB
  • PPUB
  • Publication issued
B2010-04yesWebstore
IEC/PAS 61076-3-119 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-119: Rectangular connectors - Detail specification for unshielded, free and fixed 10-way connectors with push-pull coupling for industrial environments with frequencies up to 100 MHz
PPUB
  • PPUB
  • Publication issued
E2013-09Webstore
IEC 61076-3-120 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-120: rectangular connectors -Detail specification for rewirable power connector with snap locking for 250 v d.c. And rated current of 30 a
1CD
  • 1CD
  • 1st Committee Draft
E2015-12
IEC 61076-3-121 Ed. 1.0

Detail specification for 8-way, unshielded, free and fixed connectors
ANW
  • ANW
  • Approved New Work
E2016-0248B/2383
IEC/PAS 61076-3-122 Ed. 1.0

IEC/PAS 61076-3-122/Ed1: Detail specification for rugged 8-way, shielded, free and fixed connectors
CDPAS
  • CDPAS
  • Circulated Draft for Publicly Available Spec.
E48B/2401
IEC/PAS 61076-3-1xx Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 3-1xx: Rectangular connector : Detail specification for an interface for 4 pair balanced, individually shielded, fixed and free connectors with a characteristic impedance of 100 Ohms, covering a frequency range from DC to 2300 MHz
DREJ
  • DREJ
  • Draft rejected
E2008-1148B/1839
IEC 61076-4 Ed. 1.0

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
PPUB
  • PPUB
  • Publication issued
B1995-11yesWebstore
IEC 61076-4-001 Ed. 1.0

Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 001: Blank detail specification
PPUB
  • PPUB
  • Publication issued
B1996-10yesWebstore
IEC 61076-4-100 Ed. 1.0

Connectors with assessed quality for use in d.c. and low frequency analogue applications and in digital applications with high speed data rates - Part 4: Printed board connectors - Section 100 : Detail specification for two-part connector modules having a grid of 2,5 mm (0,098 in) for printed boards and backplanes
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 61076-4-100 Ed. 2.0

Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
PPUB
  • PPUB
  • Publication issued
B2002-05yesWebstore
IEC 61076-4-101 Ed. 1.0

Connectors with assessed quality, for use in d.c. low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 101: Detail specification for two-part connector modules having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 917
DELPUB
  • DELPUB
  • Deleted Publication
B
IEC 61076-4-101 Ed. 2.0

Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
PPUB
  • PPUB
  • Publication issued
B1996-12yesWebstore
IEC 61076-4-101 fC1 Ed. 2.0

Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 61076-4-102 Ed. 1.0

Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
PPUB
  • PPUB
  • Publication issued
B1997-03yesWebstore
IEC 61076-4-103 Ed. 1.0

Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
PPUB
  • PPUB
  • Publication issued
B1998-07yesWebstore
DEL 61076-4-104 Ed. 2.0

Connectors for electronic equipment - Part 4-104: Detail specification for printed board connectors - two-part modular styles with a basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
MERGED
  • MERGED
  • Merged project
B
IEC 61076-4-104 Ed. 1.0

Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
PPUB
  • PPUB
  • Publication issued
B1995-07yesWebstore
IEC 61076-4-104 Ed. 2.0

Maintenance cycle report on IEC 61076-4-104: Connectors for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4-104: Printed board connectors with assessed quality- Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
DEL
  • DEL
  • Deleted items
Eyes48B/1095
IEC 61076-4-105 Ed. 1.0

Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105 : Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry
PPUB
  • PPUB
  • Publication issued
B1995-08Webstore
IEC 61076-4-106 Ed. 1.0

Cable-to-board modular connectors with assessed quality, shielded against electromagnetic interferences, having a basic grid of 2,0 mm and terminations on a multiple grid of 0,5 mm, fully shielded
DEL
  • DEL
  • Deleted items
E48B(NL)110
IEC 61076-4-107 Ed. 1.0

Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations
PPUB
  • PPUB
  • Publication issued
B1996-12yesWebstore
IEC 61076-4-108 Ed. 1.0

Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
PPUB
  • PPUB
  • Publication issued
E1999-04yesWebstore
IEC 61076-4-109 Ed. 1.0

Detail specification for printed board connectors, 8 or 16 way, having a grid of 2,54 mm (0,100 in) for use with active cards
DEL
  • DEL
  • Deleted items
E48B/425
IEC 61076-4-110 Ed. 1.0

Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
PPUB
  • PPUB
  • Publication issued
B2002-09yesWebstore
IEC 61076-4-111 Ed. 1.0

Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
WPUB
  • WPUB
  • Publication withdrawn
E1999-08yes
IEC 61076-4-112 Ed. 1.0

Detail specification - Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications - Part 4: Two-part connectors for printed boards for basic grid of 2.00 mm, with square male contacts of o.50 x 0.50 mm
DREJ
  • DREJ
  • Draft rejected
Eyes
IEC 61076-4-113 Ed. 1.0

Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
PPUB
  • PPUB
  • Publication issued
B2000-01yesWebstore
IEC 61076-4-113 ff Ed. 1.0

Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
MERGED
  • MERGED
  • Merged project
B2011-09
IEC 61076-4-114 Ed. 1.0

Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
WPUB
  • WPUB
  • Publication withdrawn
E2002-12yes
IEC 61076-4-115 Ed. 1.0

Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment
PPUB
  • PPUB
  • Publication issued
B2002-12yesWebstore
IEC/PAS 61076-4-115 Ed. 1.0

Connectors for electronic equipment - Part 4-115: Printed board connectors - Detail specification for a single-part hybrid connector, with a section of high-speed differential pair connections, and a section of low-speed, power and ground connections between printed boards and backplanes, in accordance with IEC 60917
DELPUB
  • DELPUB
  • Deleted Publication
E
IEC 61076-4-116 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
PPUB
  • PPUB
  • Publication issued
B2012-03yesWebstore
IEC 61076-4-116 am1 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function
ADIS
  • ADIS
  • Approved for FDIS circulation
B2014-08yes
IEC 61076-5 Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification
WPUB
  • WPUB
  • Publication withdrawn
B1996-11yes
IEC 61076-6 Ed. 1.0

Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification
WPUB
  • WPUB
  • Publication withdrawn
B2003-08yes
IEC 61076-7 Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
PPUB
  • PPUB
  • Publication issued
B2000-02yesWebstore
IEC 61076-7 fE Ed. 1.0

Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation
MERGED
  • MERGED
  • Merged project
B
IEC 61076-7-001 Ed. 1.0

Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification
PPUB
  • PPUB
  • Publication issued
B2001-12yesWebstore
IEC 61076-7-100 Ed. 1.0

Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
PPUB
  • PPUB
  • Publication issued
B2006-06yesWebstore
IEC 61984 Ed. 1.0

Connectors - Safety requirements and tests
DELPUB
  • DELPUB
  • Deleted Publication
B2001-05yes
IEC 61984 Ed. 2.0

Connectors - Safety requirements and tests
PPUB
  • PPUB
  • Publication issued
B2008-10yesWebstore
IEC 61984 fC1 Ed. 2.0

Corrigendum 1 - Connectors - Safety requirements and tests
PPUB
  • PPUB
  • Publication issued
BWebstore
IEC 62197-1 Ed. 1.0

Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification
PPUB
  • PPUB
  • Publication issued
B2006-05yesWebstore
IEC 62449 Ed. 1.0

Connectors for electronic equipment - Product requirements - Detail specification for unshielded SCA-2 (Single Connector Attach-2) connectors unshielded
DEL
  • DEL
  • Deleted items
E2007-09
IEC/TS 62450 Ed. 1.0

Technical specification for 40-Pin SCA 2 connector with parallel selection
DEL
  • DEL
  • Deleted items
E2008-12
IEC 62451 Ed. 1.0

HSSDC-2 Shielded connectors
DEL
  • DEL
  • Deleted items
E2009-06
IEC/TS 62452 Ed. 1.0

Testing and Performance Requirements for High Speed Serial and Parallel-Serial Copper Links
DEL
  • DEL
  • Deleted items
E2009-02
IEC/TR 62652 Ed. 1.0

Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications
PPUB
  • PPUB
  • Publication issued
E2010-04noWebstore