International
Electrotechnical
Commission
International Standards and Conformity Assessment
for all electrical, electronic and related technologies
SC 48B |
Connectors |
SC 48B Project files
 Project Reference |  Current Stage | Language | Frcst Date | CLC | Document Reference | Downloads |
|---|---|---|---|---|---|---|
PNW 48B-454 Ed. 1.0IEC 512 - Test 14x: Tightness of high pressure water
| DEL
| E | 48B/454 | |||
PNW 48B-455 Ed. 1.0IEC 512 - Test 16x: Contact force, resilient female contacts
| DEL
| E | 48B/455 | |||
PNW 48B-529 Ed. 1.0Detail specification for cable connector system, with assessed
quality - 15 mm mounting pitch - with integrated shielding
function, having a basic grid of 2,5 mm in accordance with IEC
917
| DEL
| E | 48B/529 | |||
PNW 48B-545 Ed. 1.0IEC 512, Test 14a: Sealing (gross air leakage)
| DEL
| E | 48B/545 | |||
PNW 48B-563 Ed. 1.0Revision of IEC 603-7: Detail specification for connectors,
8-way, keyed version, including fixed and free connectors with
common mating features, with assessed quality
| DEL
| E | 48B/563 | |||
PNW 48B-698 Ed. 1.0Rectangular connectors, 4 and 8 ways, fully shielded,cable-to-cable and cable-to-board arrangements for use in analogue and digital high-speed data applications with aband-width of minimum 600 MHz | DEL
| E | 48B/698 | |||
PNW 48B-707 Ed. 1.0IEC 60603-7-X: Detail specification for connectors, 8-way, keyed version, including fixed and free connectors with common mating features, with assessed quality | DEL
| E | 48B/707 | |||
PNW 48B-719 Ed. 1.0Rectangular connectors, 2,4 and 8 way, fully shielded, cable-to-cable and cable-to-board arrangements for use in analogue and digital high-speed data applications with a bandwidth of minimum 600 MHz | DEL
| E | 48B/719 | |||
PNW 48B-727 Ed. 1.0Specification for small form factor 45.7 mm (1.8 in) disk drives | DEL
| E | 48B/727 | |||
PNW 48B-728 Ed. 1.0Specification for small form factor 33.0 mm (1.3 in) disk drives | DEL
| E | 48B/728 | |||
PNW 48B-729 Ed. 1.0Specification for small form factor 45.7 mm (1.8 in) disk drives, 15 mm (0.59 in) high | DEL
| E | 48B/729 | |||
PNW 48B-730 Ed. 1.0Specification for small form factor 63.5 mm (2.5 in) disk drives | DEL
| E | 48B/730 | |||
PNW 48B-738 Ed. 1.0Standardization of design of connecting hardware, 4 and 8 way shielded for cable-to-cable and cable-to-board arrangements, for use in analogue and digital high speed applications, Class F, with minimum bandwidth 600 MHz | DEL
| E | 48B/738 | |||
PNW 48B-762 Ed. 1.0Basic testing procedures and measuring methods - Test: Fretting corrosion | DEL
| E | 48B/762 | |||
PNW 48B-802 Ed. 1.0Rectangular multimedia connector, 2, 4 and 8 way, fully shielded, cable-to-cable and cable-to-board arrangements with a bandwidth of up to 1400 MHz and higher | DEL
| E | 48B/802 | |||
PNW 48B-1107 Ed. 1.0Proposal for a detail specification for high speed serial data connector-2 (HSSDC-2) 7 position cable to board connector with 1,27 mm centerline contacts | DEL
| E | 48B/1107 | |||
PNW 48B-1341 Ed. 1.060603-7-3: Screened 8-Way Connectors for Frequencies up to 100MHz | DEL
| E | 48B/1341 | |||
PNW 48B-1840 Ed. 1.0IEC 61076-3-1xx Ed. 1.0: Connectors for electronic equipment - Product requirements - Part 3-1xx: Rectangular connector : Detail specification for an interface for 4 pair balanced, individually shielded, fixed and free connectors with a characteristic impedance of 100 Ohms, covering a frequency range from DC to 2300 MHz
| DEL
| E | 48B/1840 | |||
PNW 48B-2233 Ed. 1.0Connectors for electronics equipment - Part 2-111: Circular connectors - Detail specification for plug and jack for 2 mm barrel-type battery charging interface | DEL
| E | 2012-07 | 48B/2233 | ||
PNW 48B-2235 Ed. 1.0IEC 60603-7-81 Ed 1.0: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2000 MHz | PNW
| E | 48B/2335 | |||
PNW 48B-2328 Ed. 1.0IEC 61076-2-1XX/Ed1: Connectors for electronic equipment - Product requirements - Circular connectors, Detail specification for data/power connectors with M12 screw-locking | PNW
| E | 2015-06 | 48B/2328 | ||
DEL 60068-2-42 Ed. 3.0Systematic review of IEC 68-2-42 (1982) | DEL
| B | ||||
IEC 60068-2-42 Ed. 2.0Environmental testing - Part 2-42: Tests. Test Kc: Sulphur dioxide test for contacts and connections | DELPUB
| B | ||||
IEC 60068-2-42 Ed. 3.0Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections
| PPUB
| B | 2003-06 | yes | Webstore | |
DEL 60068-2-43 Ed. 2.0Systematic review of IEC 68-2-43 (1976) | DEL
| B | ||||
IEC 60068-2-43 Ed. 1.0Environmental testing - Part 2-43: Tests. Test Kd: Hydrogen sulphide test for contacts and connections | DELPUB
| B | ||||
IEC 60068-2-43 Ed. 2.0Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections | PPUB
| B | 2003-06 | yes | Webstore | |
DEL 60068-2-46 Ed. 2.0Systematic review of IEC 68-2-46 (1982) | DEL
| B | ||||
IEC 60068-2-46 Ed. 1.0Environmental testing - Part 2-46: Tests. Guidance to Test Kd: Hydrogen sulphide test for contacts and connections | PPUB
| B | Webstore | |||
IEC 60068-2-49 Ed. 1.0Environmental testing - Part 2-49: Tests. Guidance to Test Kc: Sulphur dioxide test for contacts and connections | PPUB
| B | Webstore | |||
IEC 60068-2-49 Ed. 2.0Systematic review of IEC 68-2-49 (1983) | DEL
| B | ||||
IEC 60130-0 Ed. 1.0Connectors for frequencies below 3 MHz. Part 0: Guide to drawing information in detail specifications | WPUB
| B | ||||
IEC 60130-0 Ed. 2.0Systematic review of IEC 60130-0 (1970) | DEL
| B | ||||
IEC 60130-1 Ed. 2.0Connectors for frequencies below 3 MHz. Part 1: General
requirements and measuring methods
| WPUB
| B | ||||
IEC 60130-1 Ed. 3.0Systematic review of IEC 130-1 (1988)
| DEL
| B | ||||
IEC 60130-2 Ed. 2.0Connectors for frequencies below 3 MHz. Part 2: Connectors for radio receivers and associated sound equipment | PPUB
| B | Webstore | |||
IEC 60130-2 Ed. 3.0Systematic review of IEC 60130-2 (1965) | DEL
| B | ||||
IEC 60130-2 am1 Ed. 2.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60130-3 Ed. 1.0Connectors for frequencies below 3 MHz. Part 3: Battery connectors | PPUB
| B | Webstore | |||
IEC 60130-3 Ed. 2.0Systematic review of IEC 60130-3 (1965) | DEL
| B | ||||
IEC 60130-4 Ed. 1.0Connectors for frequencies below 3 MHz. Part 4: Circular multipole connectors with threaded coupling | PPUB
| B | Webstore | |||
IEC 60130-4 Ed. 2.0Systematic review of IEC 60130-4 (1966) | DEL
| B | ||||
IEC 60130-5 Ed. 1.0Connectors for frequencies below 3 MHz. Part 5: Rectangular multipole connectors with blade contacts | PPUB
| B | Webstore | |||
IEC 60130-5 Ed. 2.0Systematic review of IEC 60130-5 (1966) | DEL
| B | ||||
IEC 60130-6 Ed. 1.0Connectors for frequencies below 3 MHz. Part 6: Rectangular miniature multipole connectors with blade contacts | PPUB
| B | Webstore | |||
IEC 60130-6 Ed. 2.0Systematic review of IEC 60130-6 (1965) | DEL
| B | ||||
IEC 60130-7 Ed. 1.0Connectors for frequencies below 3 MHz. Part 7: Circular multipole connectors with bayonet or push-pull coupling | PPUB
| B | Webstore | |||
IEC 60130-7 Ed. 2.0Systematic review of IEC 60130-7 (1971) | DEL
| B | ||||
IEC 60130-8 Ed. 2.0Connectors for frequencies below 3 MHz. Part 8: Concentric connectors for audio circuits in radio receivers | PPUB
| B | Webstore | |||
IEC 60130-8 Ed. 3.0Systematic review of IEC 60130-8 (1976) | DEL
| B | ||||
IEC 60130-9 Ed. 2.0Connectors for frequencies below 3 MHz. Part 9: Circular connectors for radio and associated sound equipment | DELPUB
| B | ||||
IEC 60130-9 Ed. 3.0Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment | DELPUB
| B | 2000-04 | yes | ||
IEC 60130-9 Ed. 4.0Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment | PPUB
| B | 2011-03 | yes | Webstore | |
IEC 60130-9 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60130-9 am2 Ed. 2.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60130-10 Ed. 1.0Connectors for frequencies below 3 MHz. Part 10: Connectors for coupling an external low-voltage power supply to portable entertainment equipment | PPUB
| B | Webstore | |||
IEC 60130-10 Ed. 2.0Systematic review of IEC 60130-10 (1971) | DEL
| B | ||||
IEC 60130-11 Ed. 1.0Connectors for frequencies below 3 MHz. Part 11: Edge socket
connectors with closed ends and having a contact spacing of 2.54
mm (0.1 in) mating either with board mounted connectors or
printed wiring boards with edge board contacts
| WPUB
| B | ||||
IEC 60130-11 Ed. 2.0Systematic review of IEC 60130-11 (1971) | DEL
| B | ||||
IEC 60130-12 Ed. 2.0Connectors for frequencies below 3 MHz. Part 12: Link and test connectors | PPUB
| B | Webstore | |||
IEC 60130-12 Ed. 3.0Systematic review of IEC 60130-12 (1976) | DEL
| B | ||||
IEC 60130-15 Ed. 1.0Connectors for frequencies below 3 MHz. Part 15: Ultra-miniature board-mounted printed- wiring connectors having a staggered contact spacing of 1.27 mm (0.05 in) | WPUB
| B | ||||
IEC 60130-15 Ed. 2.0Systematic review of IEC 60130-15 (1975) | DEL
| B | ||||
IEC 60130-16 Ed. 1.0Connectors for frequencies below 3 MHz. Part 16: Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54 mm (0.1 in) | PPUB
| B | Webstore | |||
IEC 60130-16 Ed. 2.0Systematic review of IEC 60130-16 (1976) | DEL
| B | ||||
IEC 60130-17 Ed. 1.0Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit
multi-directional mating, for use with rechargeable batteries
| PPUB
| B | 1996-09 | Webstore | ||
IEC 60130-4A Ed. 1.0Connectors for frequencies below 3 MHz - Part 4: Circular multipole connectors with threaded coupling - First supplement | PPUB
| B | Webstore | |||
IEC 60130-11A Ed. 1.0Connectors for frequencies below 3 MHz - Part 11 - First supplement: Multi-row board mounted printed circuit connectors having contact and termination spacing on a 2.54 mm (0.1 in) square grid | WPUB
| B | ||||
IEC 60149-1 Ed. 1.0Socket and accessories for electronic plug-in devices - Part 1: General requirements and methods of test | WPUB
| B | ||||
IEC 60149-1 Ed. 2.0Systematic review of IEC 60149-1 (1963) | DEL
| B | ||||
IEC 60149-1 am1 Ed. 1.0Amendment No. 1 | WPUB
| B | ||||
IEC 60149-1 am2 Ed. 1.0Amendment No. 2 | WPUB
| B | ||||
IEC 60149-2 Ed. 1.0Sockets and accessories for electronic plug-in devices - Part 2: Specification sheets for sockets and dimensions of wiring jigs and pin straighteners | WPUB
| B | ||||
IEC 60149-2 Ed. 2.0Systematic review of IEC 60149-2 (1965) | DEL
| B | ||||
IEC 60149-3 Ed. 1.0Sockets and accessories for electronic plug-in devices - Part 3: Sockets for crystal holders | WPUB
| B | ||||
IEC 60149-3 Ed. 2.0Systematic review of IEC 60149-3 (1975) | DEL
| B | ||||
IEC 60149-2A Ed. 1.0First supplement | WPUB
| B | ||||
IEC 60149-2B Ed. 1.0Second supplement | WPUB
| B | ||||
IEC 60149-2C Ed. 1.0Third supplement | WPUB
| B | ||||
IEC 60149-2D Ed. 1.0Fourth supplement | WPUB
| B | ||||
IEC 60149-2E Ed. 1.0Fifth supplement | WPUB
| B | ||||
IEC 60149-2F Ed. 1.0Sixth supplement | WPUB
| B | ||||
IEC 60149-2G Ed. 1.0Seventh supplement | WPUB
| B | ||||
IEC 60149-2H Ed. 1.0Eighth supplement | WPUB
| B | ||||
IEC 60149-2J Ed. 1.0Ninth supplement | WPUB
| B | ||||
IEC 60149-2K Ed. 1.0Tenth supplement | WPUB
| B | ||||
IEC 60149-2L Ed. 1.0Eleventh supplement | WPUB
| B | ||||
IEC 60149-3A Ed. 1.0First supplement | WPUB
| B | ||||
IEC 60203 Ed. 1.0Dimensions of the crimp area of machined crimp type contacts | WPUB
| B | ||||
IEC 60203 Ed. 2.0Systematic review of IEC 60203 (1966) | DEL
| B | ||||
IEC 60288-1 Ed. 1.0Tube and valve shields - Part 1: General requirements and methods of test | WPUB
| B | ||||
IEC 60288-1 Ed. 2.0Systematic review of IEC 60288-1 (1969) | DEL
| B | ||||
IEC 60288-1 am1 Ed. 1.0Amendment No. 1 | WPUB
| B | ||||
IEC 60288-2 Ed. 1.0Tube and valve shields - Part 2: Specification sheets for shields for tubes and valves and dimensions of testing devices and gauges for shields | WPUB
| B | ||||
IEC 60288-2 Ed. 2.0Systematic review of IEC 60288-2 (1969) | DEL
| B | ||||
IEC 60352-1 Ed. 2.0Solderless connections. Part 1: Solderless wrapped connections -
General requirements, test methods and practical guidance
| DELPUB
| B | ||||
IEC 60352-1 Ed. 3.0Solderless connections - Part 1: Wrapped connections - General
requirements, test methods and practical guidance
| PPUB
| B | 1996-12 | yes | Webstore | |
IEC 60352-1 fC1 Ed. 3.0Corrigendum 1 | PPUB
| B | Webstore | |||
IEC 60352-2 Ed. 1.0Solderless connections. Part 2: Solderless crimped connections -
General requirements, test methods and practical guidance
| DELPUB
| B | ||||
IEC 60352-2 Ed. 2.0Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance
| PPUB
| B | 2006-03 | yes | Webstore | |
IEC 60352-2 am1 Ed. 1.0Amendment No. 1
| DELPUB
| B | yes | |||
IEC 60352-2 am1 Ed. 2.0Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance | CDIS
| B | 2013-07 | yes | ||
IEC 60352-2 am2 Ed. 1.0Amendment 2 | DELPUB
| B | yes | |||
IEC 60352-3 Ed. 1.0Solderless connections - Part 3: Solderless accessible
insulation displacement connections - General requirements, test
methods and practical guidance
| PPUB
| B | Webstore | |||
IEC 60352-4 Ed. 1.0Solderless connections - Part 4: Solderless non-accessible insulation displacement connections - General requirements, test methods and practical guidance | PPUB
| B | yes | Webstore | ||
IEC 60352-4 am1 Ed. 1.0Amendment 1 | PPUB
| B | 2002-01 | yes | Webstore | |
IEC 60352-5 Ed. 1.0Solderless connections - Part 5: Solderless press-in connections - General requirements, test methods and practical guidance | DELPUB
| B | yes | 48B(C.O.)254 | ||
IEC 60352-5 Ed. 2.0Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | DELPUB
| B | 2001-03 | yes | ||
IEC 60352-5 Ed. 2.1Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | DELPUB
| B | ||||
IEC 60352-5 Ed. 3.0Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | DELPUB
| B | 2008-01 | yes | ||
IEC 60352-5 Ed. 4.0Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | PPUB
| B | 2012-02 | yes | Webstore | |
IEC 60352-5 am1 Ed. 2.0Amendment 1 - Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance | DELPUB
| B | 2003-11 | yes | ||
IEC 60352-6 Ed. 1.0Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance
| PPUB
| B | 1997-12 | yes | Webstore | |
IEC 60352-7 Ed. 1.0Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance | PPUB
| B | 1999-12 | yes | Webstore | |
IEC 60352-7 fF Ed. 1.0Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance | MERGED
| B | ||||
IEC 60352-8 Ed. 1.0Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance | PPUB
| B | 2011-02 | yes | Webstore | |
IEC 60512-1 Ed. 3.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 1: General
| DELPUB
| B | yes | |||
IEC 60512-1 Ed. 4.0Connectors for electronic equipment - Tests and measurements - Part 1: General | PPUB
| B | yes | Webstore | ||
IEC 60512-1-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-1-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 1-2: General examination - Test 1b: Examination of dimension and mass | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-1-3 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 1: General
examination - Section 3: Test 1c - Electrical engagement length
| PPUB
| E | 1996-03 | yes | Webstore | |
IEC 60512-1-4 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 1: General -
Section 4: Test 1d: Contact protection effectiveness
(scoop-proof)
| PPUB
| B | 1994-02 | yes | Webstore | |
IEC 60512-1-4 fC1 Ed. 1.0Corrigendum 1 | PPUB
| B | Webstore | |||
IEC 60512-1-100 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications | DELPUB
| B | yes | |||
IEC 60512-1-100 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications | DELPUB
| B | 2006-03 | yes | ||
IEC 60512-1-100 Ed. 3.0Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications | PPUB
| B | 2012-02 | yes | Webstore | |
IEC 60512-1-101 Ed. 1.0Connectors for electronic equipment - Basic testing and measurements - Part 1-101: Blank detail specification | 2CD
| E | 2014-09 | 48B/2337 | ||
IEC 60512-2 Ed. 2.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods. Part 2: General
examination, electrical continuity and contact resistance tests,
insulation tests and voltage stress tests
| WPUB
| B | ||||
IEC 60512-2 am1 Ed. 2.0Amendment No. 1
| WPUB
| B | ||||
IEC 60512-2-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-2-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-2-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-2-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-2-6 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Housing (shell) electrical continuity | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-3 Ed. 1.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods. Part 3:
Current-carrying capacity tests
| WPUB
| B | ||||
IEC 60512-3 Ed. 2.0Revision of IEC 60512-3 (1976) | DEL
| B | ||||
IEC 60512-3-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-4 Ed. 1.0Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests | WPUB
| B | ||||
IEC 60512-4 Ed. 2.0Revision of IEC 60512-4 (1976) | DEL
| B | ||||
IEC 60512-4-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-4-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 4-2: Voltage stress tests - Test 4b: Partial discharge | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-4-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-5 Ed. 2.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods - Part 5: Impact tests
(free components), static load tests (fixed components),
endurance tests and overload tests
| WPUB
| B | ||||
IEC 60512-5-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-5-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 5-2: Current-carrying capacity tests - Test 5b: Current-temperature derating | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-6 Ed. 2.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods. Part 6: Climatic tests
and soldering tests
| WPUB
| B | ||||
IEC 60512-6 Ed. 3.0Revision of IEC 60512-6 (1984) | DEL
| B | ||||
IEC 60512-6-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-6-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Bump | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-6-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 6-3: Dynamic stress tests - Test 6c: Shock | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-6-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal) | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-6-5 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 6: Dynamic stress
tests - Section 5: Test 6e: Random vibration
| PPUB
| B | 1998-01 | yes | Webstore | |
IEC 60512-7 Ed. 3.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods - Part 7: Mechanical
operating tests and sealing tests
| WPUB
| B | ||||
IEC 60512-7-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated) | PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60512-7-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free components) - Test 7b: Mechanical strength impact | PPUB
| B | 2011-11 | yes | Webstore | |
IEC 60512-8 Ed. 3.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods - Part 8: Connector
tests (mechanical) and mechanical tests on contacts and
terminations
| WPUB
| B | ||||
IEC 60512-8-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-8-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial | PPUB
| B | 2011-04 | yes | Webstore | |
IEC 60512-8-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robustness of actuating lever | PPUB
| B | 2011-05 | yes | Webstore | |
IEC 60512-8-3 f1 Ed. 1.0Test 8c: Robustness of actuator lever and/or end stop
| MERGED
| E | ||||
DEL 60512-9 Ed. 3.0Revision of IEC 60512-9 Ed.2
| MERGED
| B | ||||
IEC 60512-9 Ed. 2.0Electromechanical components for electronic equipment; basic
testing procedures and measuring methods - Part 9: Miscellaneous
tests
| WPUB
| B | ||||
IEC 60512-9-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 9-1: Endurance tests - Test 9a: Mechanical operation | PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60512-9-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 9-2: Endurance tests - Test 9b: Electrical load and temperature | PPUB
| B | 2011-12 | yes | Webstore | |
IEC 60512-9-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load
| DELPUB
| B | 2006-02 | yes | ||
IEC 60512-9-3 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging and separating) with electrical load | PPUB
| B | 2011-07 | yes | Webstore | |
IEC 60512-9-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 9-4: Endurance tests - Test 9d: Durability of contact retention system and seals (maintenance, ageing) | PPUB
| B | 2011-04 | yes | Webstore | |
IEC 60512-9-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic | PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60512-10-4 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 10: Impact tests
(free components), static load tests (fixed components),
endurance tests and overload tests - Section 4: Test 10d:
Electrical overload (connectors)
| DELPUB
| B | yes | |||
IEC 60512-10-4 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests - Test 10d: Electrical overload (connectors)
| PPUB
| B | 2003-09 | yes | Webstore | |
IEC 60512-11-1 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence | PPUB
| B | 1996-01 | Webstore | ||
IEC 60512-11-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-4: Climatic tests - Test 11d: Rapid change of temperature | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-5: Climatic tests - Test 11e: Mould growth | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-6 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-7 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 7: Test 11g: Flowing mixed gas corrosion test | DELPUB
| B | yes | |||
IEC 60512-11-7 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test | PPUB
| B | 2003-06 | yes | Webstore | |
IEC 60512-11-8 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 8: Test 11h - Sand and dust | PPUB
| B | 1995-10 | Webstore | ||
IEC 60512-11-9 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-9: Climatic tests - Test 11i: Dry heat | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-10 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-10: Climatic tests - Test 11j: Cold | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-11 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-11: Climatic tests - Test 11k: Low air pressure | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-12 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-12: Climatic tests - Test 11m: Damp heat, cyclic | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-13 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-14 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 11: Climatic
tests - Section 14: Test 11p: Flowing single gas corrosion test
| DELPUB
| B | yes | |||
IEC 60512-11-14 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test | PPUB
| B | 2003-04 | yes | Webstore | |
IEC 60512-11-14 ff Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test | MERGED
| B | 2011-09 | |||
IEC 60512-12-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 60512-12-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
| PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60512-12-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, de-wetting
| PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60512-12-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method
| PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60512-12-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
| PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60512-12-6 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering | PPUB
| B | 2006-09 | yes | Webstore | |
IEC 60512-12-7 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method | PPUB
| B | 2002-01 | yes | Webstore | |
IEC 60512-13-1 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 13: Mechanical
operating tests - Section 1: Test 13a: Engaging and separating
forces
| DELPUB
| B | yes | |||
IEC 60512-13-1 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
| PPUB
| B | 2004-04 | yes | Webstore | |
IEC 60512-13-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
| PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60512-13-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
| PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60512-14-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 60512-14-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 60512-14-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 60512-14-6 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 60512-14-7 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing test - Section 7: Test 14g: Impacting water
| PPUB
| B | 1996-09 | yes | Webstore | |
IEC 60512-15-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact retention in insert
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Insert retention in housing (axial)
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 15-3: Connector tests (mechanical) - Test 15c: Insert retention in housing (torsional)
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 15-4: Connector tests (mechanical) - Test 15d: Contact insertion, release and extraction force
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact retention in insert, cable nutation
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-6 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-7 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 15-7: Connector tests (mechanical) - Test 15g: Robustness of protective cover attachment
| PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-15-8 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15h - Contact retention system resistance to tool application | PPUB
| B | 2006-09 | yes | Webstore | |
IEC 60512-16-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage | PPUB
| B | 2008-06 | yes | Webstore | |
IEC 60512-16-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry | PPUB
| B | 2008-06 | yes | Webstore | |
IEC 60512-16-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (crimped connections) | PPUB
| B | 2008-06 | yes | Webstore | |
IEC 60512-16-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-6 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-7 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-8 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-8: Mechanical tests on connections and terminations - Test 16h: Insulating grip effectiveness (crimped connections) | PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-16-9 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force | PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-16-11 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solderless wrapped connections | PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-16-13 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections | PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-16-14 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-16 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-17 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compressive strength, fixed male tabs | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-16-18 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation | PPUB
| B | 2008-05 | yes | Webstore | |
IEC 60512-16-20 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections) | PPUB
| B | 2006-09 | yes | Webstore | |
IEC 60512-16-21 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test via the application of external mechanical stresses | PPUB
| B | 2012-04 | yes | Webstore | |
IEC 60512-17-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-17-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 17-2: Cable clamping tests - Test 17b: Cable clamp resistance to cable rotation | PPUB
| B | 2011-05 | yes | Webstore | |
IEC 60512-17-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-17-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-17-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 17-5: Cable clamping tests - Test 17e: Cable clamp resistance to dynamic cable pull | DEL
| E | 2011-03 | 48B/1997 | ||
IEC 60512-19-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 19-1: Chemical resistance tests - Test 19a: Fluid resistance of pre-insulated crimp barrels | PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60512-19-3 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 19: Chemical
resistance tests - Section 3: Test 19c - Fluid resistance
| PPUB
| E | yes | Webstore | ||
IEC 60512-20-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-20-2 Ed. 1.0Electromechanical components for electronic equipment - Basic
testing procedures and measuring methods - Part 20-2: Test 20b - Flammability tests - Fireproofness | PPUB
| B | 1995-10 | yes | Webstore | |
IEC 60512-20-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 20-3: Fire hazard tests - Test 20c: Flammability, glow-wire | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-21-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-22-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 22-1: Capacitance tests - Test 22a: Capacitance | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-23-1 Ed. 1.0Test 23a: Shielding effectiveness of connectors (100 MHz to 1 GHz) using a transfer impedance method | DEL
| E | 48B(Sec.)326 | |||
IEC 60512-23-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60512-23-3 Ed. 1.0Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories | PPUB
| B | yes | Webstore | ||
IEC 60512-23-3 fC1 Ed. 1.0Corrigendum 1 | PPUB
| B | Webstore | |||
IEC 60512-23-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain | PPUB
| B | yes | Webstore | ||
IEC 60512-23-4 Ed. 2.0Maintenance cycle report on IEC 60512-23-4: Connectors for electronic equipment - Tests and measurements - Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain | DEL
| E | 2004-07 | yes | 48B/1280 | |
IEC 60512-23-5 Ed. 1.0Test methods for 8 way connectors (e.g. IEC 60603-7) up to 600 MHz | DEL
| E | 48B/661 | |||
IEC 60512-23-7 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors | PPUB
| B | yes | Webstore | ||
IEC 60512-24-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 24-1: Magnetic interference tests - Test 24a: Residual magnetism | PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60512-25-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio | PPUB
| B | yes | Webstore | ||
IEC 60512-25-1 Ed. 2.0Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio
| DEL
| E | 2005-10 | yes | ||
IEC 60512-25-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss) | PPUB
| B | yes | Webstore | ||
IEC 60512-25-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c - Rise time degradation | PPUB
| B | yes | Webstore | ||
IEC 60512-25-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay | PPUB
| B | yes | Webstore | ||
IEC 60512-25-5 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss | PPUB
| B | yes | Webstore | ||
IEC 60512-25-6 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-6: Test 25f: Eye pattern and jitter
| PPUB
| B | yes | Webstore | ||
IEC 60512-25-7 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 25-7: Test 25g - Impedance, reflection coefficient, and voltage standing wave ratio (VSWR) | PPUB
| B | yes | Webstore | ||
IEC 60512-25-8 Ed. 1.0Connectors for electronic equipment - Tests and measurements -
Part 25-8: Test 25h: Balance of symmetrical signals | DEL
| E | 2007-12 | 48B/1503 | ||
IEC 60512-25-9 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien crosstalk | PPUB
| B | 2008-09 | yes | Webstore | |
IEC 60512-26-1 Ed. 1.0Connectors for electronic equipment - Tests and measurements Part 26-1: General requirements for measurement setup associated with tests 26a to 26f
| MERGED
| E | 2007-06 | |||
IEC 60512-26-2 Ed. 1.0Connectors for electronic equipment - Tests and measurements
Part 26-2: tests 26a, 26b, 26c, 26d, 26e and 26f: Connector measurements up to 250 MHz
| MERGED
| E | 2007-06 | |||
IEC 60512-26-3 Ed. 1.0Connectors for electronic equipment - Tests and measurements
Part 26-3: Test arrangement up to 250 MHz associated with tests 26a to 26f
| MERGED
| E | 2007-06 | |||
IEC 60512-26-4 Ed. 1.0Connectors for electronic equipment - Tests and measurements
Part 26-4: Reference arrangement up to 250 MHz associated with tests 26a to 26f
| MERGED
| E | 2007-12 | |||
IEC 60512-26-100 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60512-26-100 Ed. 1.1Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g | PPUB
| B | Webstore | |||
IEC 60512-26-100 am1 Ed. 1.0Amendment 1 - Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g | PPUB
| B | 2011-04 | yes | Webstore | |
IEC 60512-27-100 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 MHz on 60603-7 series connectors - Tests 27a to 27g | PPUB
| B | 2011-12 | yes | Webstore | |
IEC 60512-28-100 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g | PPUB
| B | 2013-02 | yes | Webstore | |
IEC 60512-29-100 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 MHz on M12 style connectors - Tests 29a to 29g | 2CD
| E | 2013-12 | |||
IEC 60512-99-001 Ed. 1.0Connectors for electronic equipment - Tests and measurements - Part 99-001: Test schedule for engaging and separating connectors under electrical load - Test 99a: Connectors used in twisted pair communication cabling with remote power | PPUB
| B | 2012-06 | yes | Webstore | |
IEC 60603-1 Ed. 2.0Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality | PPUB
| B | Webstore | |||
IEC 60603-1 am1 Ed. 2.0Amendment 1 | PPUB
| B | Webstore | |||
IEC 60603-2 Ed. 2.0Connectors for frequencies below 3 MHz for use with printed boards. Part 2: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with common mounting features | DELPUB
| B | ||||
IEC 60603-2 Ed. 3.0Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features | PPUB
| B | 1995-11 | Webstore | ||
IEC 60603-2 am1 Ed. 3.0Amendment 1 | PPUB
| B | 1996-10 | Webstore | ||
IEC 60603-3 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 3: Two-part connectors for printed boards having
contacts spaced at 2.54 mm (0.100 in) centres and staggered
terminations at that same spacing
| PPUB
| B | Webstore | |||
IEC 60603-3 Ed. 2.0Systematic review of IEC 603-3 (1987)
| DEL
| B | ||||
IEC 60603-4 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 4: Two-part connectors for printed boards having
contacts spaced at 1.91 mm (0.075 in) centres and staggered
terminations at that same spacing
| PPUB
| B | Webstore | |||
IEC 60603-4 Ed. 2.0Systematic review of IEC 603-4 (1987)
| DEL
| B | ||||
IEC 60603-5 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 5: Edge-socket connectors and two-part connectors
for double-sided printed boards with 2.54 mm (0.1 in) spacing
| PPUB
| B | Webstore | |||
IEC 60603-5 Ed. 2.0Systematic review of IEC 603-5 (1987)
| DEL
| B | ||||
IEC 60603-6 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 6: Edge socket connectors and printed board
connectors with 2.54 mm (0.1 in) contact spacing for single or
double sided printed boards of 1.6 mm (0.063 in) nominal
thickness
| PPUB
| B | Webstore | |||
IEC 60603-6 Ed. 2.0Systematic review of IEC 603-6 (1987)
| DEL
| B | ||||
IEC 60603-7 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 7: Detail specification for connectors, 8-way,
including fixed and free connectors with common mating features
| DELPUB
| B | ||||
IEC 60603-7 Ed. 2.0Connectors for frequencies below 3 MHz for use with printed
boards - Part 7: Detail specification for connectors, 8-way,
including fixed and free connectors with common mating
features, with assessed quality
| DELPUB
| B | 1996-11 | yes | ||
IEC 60603-7 Ed. 3.0Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60603-7 Ed. 3.1Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors | PPUB
| B | Webstore | |||
IEC 60603-7 am1 Ed. 3.0Amendment 1 - Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors | PPUB
| B | 2011-10 | yes | Webstore | |
IEC 60603-7-1 Ed. 1.0Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality | DELPUB
| B | 2002-02 | yes | ||
IEC 60603-7-1 Ed. 2.0Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors
| DELPUB
| B | 2009-06 | yes | ||
IEC 60603-7-1 Ed. 3.0Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors | PPUB
| B | 2011-05 | yes | Webstore | |
DEL 60603-7-2 Ed. 1.0Amendment to IEC 60603-7: Detail specification for 8 way
connectors, with assessed quality, including fixed and free
connectors with common mounting features; test methods and
related requirements for use at frequencies up to 100 MHz
| MERGED
| B | yes | |||
IEC 60603-7-2 Ed. 1.0Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
| DELPUB
| B | 2007-03 | yes | ||
IEC 60603-7-2 Ed. 2.0Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz | PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60603-7-3 Ed. 1.0Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz | DELPUB
| B | 2008-02 | yes | ||
IEC 60603-7-3 Ed. 2.0Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz | PPUB
| B | 2010-04 | yes | Webstore | |
IEC/PAS 60603-7-3 Ed. 1.0Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz | DELPUB
| E | 2004-07 | 48B/1394 | ||
IEC 60603-7-4 Ed. 1.0Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
| DELPUB
| B | 2005-02 | yes | ||
IEC 60603-7-4 Ed. 2.0Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
| PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60603-7-5 Ed. 1.0Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
| DELPUB
| B | 2007-03 | yes | ||
IEC 60603-7-5 Ed. 2.0Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
| PPUB
| B | 2010-04 | yes | Webstore | |
IEC 60603-7-7 Ed. 1.0Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded) | DELPUB
| E | yes | |||
IEC 60603-7-7 Ed. 2.0Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz | DELPUB
| E | 2006-06 | yes | ||
IEC 60603-7-7 Ed. 3.0Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60603-7-41 Ed. 1.0Connectors for electronic equipment - Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 60603-7-51 Ed. 1.0Connectors for electronic equipment - Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 60603-7-71 Ed. 1.0Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz | PPUB
| B | 2010-07 | yes | Webstore | |
IEC 60603-8 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 8: Two-part connectors for printed boards, for
basic grid of 2.54 mm (0.1 in), with square male contacts of
0.63 mm x 0.63 mm
| PPUB
| B | Webstore | |||
IEC 60603-8 Ed. 2.0Systematic review of IEC 603-8 (1991)
| DEL
| B | ||||
IEC 60603-9 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards. Part 9: Two-part connectors for printed boards,
backpanels and cable connectors, basic grid of 2.54 mm (0.1 in)
| PPUB
| B | Webstore | |||
IEC 60603-9 Ed. 2.0Systematic review of IEC 603-9 (1990)
| DEL
| B | ||||
IEC 60603-10 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type | PPUB
| B | Webstore | |||
IEC 60603-10 Ed. 2.0Systematic review of IEC 60603-10 (1991) | DEL
| B | ||||
IEC 60603-11 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors) | PPUB
| B | Webstore | |||
IEC 60603-11 Ed. 2.0Systematic review of IEC 60603-11 (1992) | DEL
| B | ||||
IEC 60603-12 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits | PPUB
| B | Webstore | |||
IEC 60603-13 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed
boards - Part 13: Detail specification for two-part connectors
of assessed quality, for printed boards for basic grid of 2,54
mm (0,1 in), with free connectors for non-accessible insulation
displacement terminations (ID)
| PPUB
| B | Webstore | |||
IEC 60603-14 Ed. 1.0Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
| PPUB
| B | 1997-09 | Webstore | ||
IEC 60603-15 Ed. 1.0Detail specification - Two part connectors for printed boards
for basic grid of 2,0 mm with square contacts | DEL
| E | 48B/426 | |||
IEC 60760 Ed. 2.0Flat, quick-connect terminations | DELPUB
| B | ||||
IEC 60760 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 1993-06 | |||
IEC 60807-1 Ed. 2.0Rectangular connectors for frequencies below 3 MHz - Part 1:
Generic specification - General requirements and guide for the
preparation of detail specifications for connectors with
assessed quality
| PPUB
| B | Webstore | |||
IEC 60807-1 Ed. 3.0Systematic review of IEC 807-1 (1991)
| DEL
| B | ||||
IEC 60807-2 Ed. 2.0Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types | PPUB
| B | Webstore | |||
IEC 60807-2 am1 Ed. 2.0Amendment No. 1 | PPUB
| B | 1996-04 | Webstore | ||
IEC 60807-3 Ed. 1.0Rectangular connectors for frequencies below 3 MHz. Part 3:
Detail specification for a range of connectors with trapezoidal
shaped metal shells and round contacts - Removable crimp contact
types with closed crimp barrels, rear insertion/rear extraction
| PPUB
| B | Webstore | |||
IEC 60807-3 Ed. 2.0Systematic review of IEC 807-3 (1990)
| DEL
| B | ||||
IEC 60807-6 Ed. 1.0Rectangular connectors for frequencies below 3 MHz. Part 6:
Detail specification for a range of rectangular connectors with
size 20 (7.5 A) round contacts having polarized guides - Fixed
solder contact types
| PPUB
| B | Webstore | |||
IEC 60807-6 Ed. 2.0Systematic review of IEC 807-6 (1988)
| DEL
| B | ||||
IEC 60807-7 Ed. 1.0Rectangular connectors for frequencies below 3 MHz - Part 7: Detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality | PPUB
| B | Webstore | |||
IEC 60807-7 Ed. 2.0Systematic review of IEC 60807-7 (1991) | DEL
| B | ||||
IEC 60807-8 Ed. 1.0Rectangular connectors for frequencies below 3 MHz - Part 8: Detail specification for connectors, four-signal contacts and earthing contacts for cable screen | PPUB
| B | Webstore | |||
IEC 60807-8 am1 Ed. 1.0Amendment to IEC 807-8 - Additional testing
| DEL
| E | 48B(Sec.)345 | |||
IEC 60807-9 Ed. 1.0Rectangular connectors for frequencies below 3 MHz - Part 9: Detail specification for a range of peritelevision connectors | PPUB
| B | Webstore | |||
IEC 60807-10 Ed. 1.0Detail specification for rectangular hybrid connectors with trapezoidal shaped shells, with assessed quality, with non-removable contacts, solder and accessible insulation displacement terminations | DEL
| E | 48B(NL)109 | |||
IEC 61076-1 Ed. 1.0Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification | DELPUB
| B | yes | |||
IEC 61076-1 Ed. 2.0Connectors for electronic equipment - Product requirements -
Part 1: Generic specification
| PPUB
| B | 2006-05 | yes | Webstore | |
IEC 61076-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | yes | |||
IEC 61076-1 am2 Ed. 1.0Amendment 2 | DELPUB
| B | yes | |||
IEC 61076-2 Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 2: Circular connectors with assessed quality - Sectional specification
| DELPUB
| B | 1999-01 | yes | ||
IEC 61076-2 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors | PPUB
| B | 2011-07 | yes | Webstore | |
IEC 61076-2-001 Ed. 1.0Connectors for electronic equipment - Part 2-001: Circular connectors - Blank detail specification | DELPUB
| B | 2001-11 | yes | ||
IEC 61076-2-001 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification | PPUB
| B | 2011-07 | yes | Webstore | |
IEC 61076-2-100 Ed. 1.0Detail specification for circular power connectors for low frequencies, for use with loudspeakers, amplifiers and sound equipment | DEL
| E | 48B(Sec.)246 | |||
IEC 61076-2-101 Ed. 1.0Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications | DELPUB
| B | 2003-11 | yes | ||
IEC 61076-2-101 Ed. 1.1Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications | DELPUB
| B | ||||
IEC 61076-2-101 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | DELPUB
| B | 2008-07 | yes | ||
IEC 61076-2-101 Ed. 3.0Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 61076-2-101 fC1 Ed. 2.0Corrigendum 1 - Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking | DELPUB
| B | ||||
IEC 61076-2-101 fF Ed. 1.0Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications | MERGED
| F | ||||
IEC 61076-2-101 am1 Ed. 1.0Amendment 1 - Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications
| DELPUB
| B | 2006-02 | yes | ||
IEC 61076-2-102 Ed. 1.0Connectors for electronic equipment - Part 2-102: Circular connectors with assessed quality - Detail specification for plugs and jacks for external low voltage power supply | PPUB
| B | 2003-02 | yes | Webstore | |
IEC 61076-2-103 Ed. 1.0Connectors for electronic equipment - Part 2-103: Circular connectors - Detail specification for a range of multipole connectors (type 'XLR')
| PPUB
| B | 2001-05 | yes | Webstore | |
IEC 61076-2-104 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
| PPUB
| B | 2008-04 | yes | Webstore | |
IEC 61076-2-104 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking | ACDV
| E | 2014-04 | no | ||
IEC 61076-2-105 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking | PPUB
| B | 2008-08 | yes | Webstore | |
IEC 61076-2-106 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-106: Circular connectors - Detail specification for connectors M 16 x 0,75 with screw-locking and degree of protection IP40 or IP65/67 | PPUB
| B | 2011-07 | yes | Webstore | |
IEC 61076-2-107 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking | PPUB
| B | 2010-05 | yes | Webstore | |
IEC/PAS 61076-2-107 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-107: Circular connectors - Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking | DELPUB
| E | 2007-12 | 48B/1790B | ||
IEC/PAS 61076-2-108 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-108: Circular connectors - Detail specification for glass to metal seal style M12 connectors with screw-locking intended to mate with connectors conforming to IEC 61076-2-101
| WPUB
| E | 2009-06 | 48B/1975 | ||
IEC 61076-2-109 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M 12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz | ADIS
| B | 2013-09 | yes | ||
IEC/PAS 61076-2-109 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz | PPUB
| E | 2010-03 | Webstore | ||
IEC 61076-2-110 Ed. 1.0IEC 61076-2-110 Ed 1.0: Connectors for electronic equipment - Product requirements- part 2-xxx: Circular connectors - Detail specification for M12 x 1 circular connectors with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/sec | MERGED
| E | 2012-11 | 48B/2097A | ||
IEC/PAS 61076-2-110 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-110: Circular connectors - Detail specification for circular connectors M12 x 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s | PPUB
| E | 2010-03 | Webstore | ||
IEC 61076-2-111 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors M12 with screw-locking | 1CD
| E | 2014-03 | |||
IEC 61076-2-112 Ed. 1.0Connectors for electronic equipment - Product requirements - Circular connectors, Detail specification for M12 power connectors up to12 Amps with screw-locking | ANW
| E | 2014-09 | 48B/2292 | ||
IEC 61076-3 Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3: Rectangular connectors with assessed quality - Sectional specification
| DELPUB
| E | 1999-11 | yes | ||
IEC 61076-3 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification | PPUB
| B | 2008-06 | yes | Webstore | |
IEC 61076-3 f1 Ed. 2.0IEC 61076-3, Ed.2: Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification | MERGED
| E | yes | 48B/1703 | ||
IEC 61076-3-001 Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 3-001: Rectangular connectors with assessed quality - Blank detail specification
| DELPUB
| E | 1999-11 | yes | ||
IEC 61076-3-001 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
| PPUB
| B | 2008-06 | yes | Webstore | |
IEC 61076-3-001 f1 Ed. 2.0IEC 61076-3-001, Ed.2: Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification | MERGED
| E | yes | 48B/1705 | ||
IEC 61076-3-100 Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 3-100: Rectangular connectors with assessed quality - Detail specification for a range of shielded connectors with trapezoidal-shaped shells and non-removable ribbon contacts on a 1,27 mm double row
| PPUB
| B | 1998-01 | yes | Webstore | |
IEC 61076-3-101 Ed. 1.0Connectors with assessed quality, for use in d.c., low-frequency
analogue and in digital high-speed data applications - Part 3:
Rectangular connectors - Section 101: Detail specification for a
range of shielded connectors with trapezoidal shaped shells and
non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
| PPUB
| B | 1997-07 | yes | Webstore | |
IEC 61076-3-101 fC1 Ed. 1.0Corrigendum 1 - Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line | PPUB
| B | Webstore | |||
IEC 61076-3-102 Ed. 1.0Detail specification for rectangular connectors having three
contacts, for use in audio/video and other applications
| DEL
| E | yes | |||
IEC 61076-3-103 Ed. 1.0Connectors for electronic equipment - Part 3-103:
Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) | PPUB
| B | 1998-12 | yes | Webstore | |
IEC 61076-3-103 ff Ed. 1.0Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) | MERGED
| F | ||||
IEC 61076-3-104 Ed. 1.0Connectors for electronic equipment - Part 3-104: Rectangular connectors - Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum | DELPUB
| E | yes | |||
IEC 61076-3-104 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz | PPUB
| E | 2006-08 | yes | Webstore | |
IEC 61076-3-104 Ed. 3.0Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 1000 MHz | A2CD
| E | 2014-06 | yes | ||
BPUB
| B | 2013-05 | ||||
IEC/PAS 61076-3-104 Ed. 1.0Connectors for electronic equipment - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum
| DELPUB
| E | 48B/1167 | |||
IEC 61076-3-105 Ed. 1.0Connectors for electronic equipment - Part 3-105: Detail specification for 4 pair balanced, individually shielded, fixed and free connectors with a characteristic impedance of 100 ohms, covering a frequency range from DC to 1500 MHz
| DEL
| B | 2006-12 | yes | ||
IEC 61076-3-106 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface | PPUB
| B | 2006-09 | yes | Webstore | |
IEC 61076-3-107 Ed. 1.0Connectors for electronic equipment - Part 3-107: Detail specification for shielded rectangular connectors for universal serial bus plus power connector(s), Series "A" | DEL
| E | 2004-09 | |||
IEC 61076-3-108 Ed. 1.0Connectors for electronic equipment - Detail specification for shielded rectangular connectors for universal serial bus plus power connector(s), series "B" | DEL
| E | 2004-12 | |||
IEC 61076-3-109 Ed. 1.0Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529 | CAN
| E | ||||
IEC/PAS 61076-3-109 Ed. 1.0Connectors for electronic equipment - Part 3-109: Detail specification for two-part cable to board connector for high speed data application in a harsh industrial environment - Protection rate IP67 according to IEC 60529 | WPUB
| E | 48B/1106 | |||
IEC 61076-3-110 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-110: Rectangular connectors - Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz | DELPUB
| B | 2007-12 | yes | ||
IEC 61076-3-110 Ed. 2.0Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for shielded, free and fixed connectors for data transmission with frequencies up to 1 000 MHz | PPUB
| B | 2012-04 | yes | Webstore | |
IEC/PAS 61076-3-110 Ed. 1.0Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz | DELPUB
| E | 2002-06 | 48B/1115 | ||
IEC 61076-3-111 Ed. 1.0Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, frequencies up to 250 MHz | CAN
| E | ||||
IEC/PAS 61076-3-111 Ed. 1.0Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz | WPUB
| E | 48B/1174 | |||
IEC 61076-3-112 Ed. 1.0Connectors for electronic equipment - Part 3-112: Rectangular connectors - Detail specification for rectangular connectors with four contacts for high performance serial bus for consumer audio/ video equipment | PPUB
| B | 2006-05 | yes | Webstore | |
IEC 61076-3-113 Ed. 1.0Connectors for electronic equipment - Part 3-113: Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates | DEL
| E | 2005-09 | |||
IEC 61076-3-114 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type | PPUB
| B | 2009-05 | yes | Webstore | |
IEC/PAS 61076-3-114 Ed. 1.0Connectors for electronic equipment - Part 3-114: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type | DELPUB
| E | 2005-11 | 48B/1517 | ||
IEC 61076-3-115 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type | PPUB
| B | 2009-06 | yes | Webstore | |
IEC/PAS 61076-3-115 Ed. 1.0Connectors for electronic equipment - Part 3-115: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type | DELPUB
| E | 2005-11 | 48B/1518 | ||
IEC 61076-3-116 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever | PPUB
| B | 2008-09 | yes | Webstore | |
IEC/PAS 61076-3-116 Ed. 1.0Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp | DELPUB
| E | 2005-11 | 48B/1519 | ||
IEC 61076-3-117 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push-pull coupling
| PPUB
| B | 2009-05 | yes | Webstore | |
IEC/PAS 61076-3-117 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating IEC 60603-7 -
Variant 14 related to IEC 61076-3-106 - Push-pull coupling | DELPUB
| E | 2006-11 | 48B/1655 | ||
IEC 61076-3-118 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
| PPUB
| B | 2010-04 | yes | Webstore | |
IEC/PAS 61076-3-1xx Ed. 1.0Connectors for electronic equipment - Product requirements -
Part 3-1xx: Rectangular connector : Detail specification for an interface for 4 pair balanced, individually shielded, fixed and free connectors with a characteristic impedance of 100 Ohms, covering a frequency range from DC to 2300 MHz
| DREJ
| E | 2008-11 | 48B/1839 | ||
IEC 61076-4 Ed. 1.0Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors | PPUB
| B | 1995-11 | yes | Webstore | |
IEC 61076-4-001 Ed. 1.0Connectors with assessed quality, for use in d.c., low-frequency
analogue and in digital high-speed data applications - Part 4:
Printed board connectors - Section 001: Blank detail
specification
| PPUB
| B | 1996-10 | yes | Webstore | |
IEC 61076-4-100 Ed. 1.0Connectors with assessed quality for use in d.c. and low frequency analogue applications and in digital applications with high
speed data rates - Part 4: Printed board connectors - Section 100
: Detail specification for two-part connector modules having a
grid of 2,5 mm (0,098 in) for printed boards and backplanes
| DELPUB
| B | ||||
IEC 61076-4-100 Ed. 2.0Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes | PPUB
| B | 2002-05 | yes | Webstore | |
IEC 61076-4-101 Ed. 1.0Connectors with assessed quality, for use in d.c. low-frequency
analogue and in digital high speed data applications - Part 4:
Printed board connectors - Section 101: Detail specification for
two-part connector modules having a basic grid of 2,0 mm for
printed boards and backplanes in accordance with IEC 917
| DELPUB
| B | ||||
IEC 61076-4-101 Ed. 2.0Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 | PPUB
| B | 1996-12 | yes | Webstore | |
IEC 61076-4-101 fC1 Ed. 2.0Corrigendum 1 - Connectors for electronic equipment - Part 4-101: Printed board connectors with assessed quality - Detail specification for two-part connector modules, having a basic grid of 2,0 mm for printed boards and backplanes in accordance with IEC 60917 | PPUB
| B | Webstore | |||
IEC 61076-4-102 Ed. 1.0Connectors with assessed quality for use in d.c., low-frequency
analogue and in digital high speed data applications - Part 4:
Printed board connectors - Section 102: Detail specification for
two-part single-pole connectors, for multiple uses on plug-in
units, with pre-centring, coding and early mating features,
having a metric grid in accordance with IEC 60917
| PPUB
| B | 1997-03 | yes | Webstore | |
IEC 61076-4-103 Ed. 1.0Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
| PPUB
| B | 1998-07 | yes | Webstore | |
DEL 61076-4-104 Ed. 2.0Connectors for electronic equipment - Part 4-104: Detail specification for printed board connectors - two-part modular styles with a basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm | MERGED
| B | ||||
IEC 61076-4-104 Ed. 1.0Connectors for use in d.c., low frequency analogue and digital high speed data applications - Part 4-104: Printed board connectors with assessed quality - Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm
| PPUB
| B | 1995-07 | yes | Webstore | |
IEC 61076-4-104 Ed. 2.0Maintenance cycle report on IEC 61076-4-104: Connectors for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4-104: Printed board connectors with assessed quality- Detail specification for two-part modular connectors, basic grid of 2,0 mm, with terminations on a multiple grid of 0,5 mm | DEL
| E | yes | 48B/1095 | ||
IEC 61076-4-105 Ed. 1.0Connectors with assessed quality, for use in d.c., low frequency
analogue and in digital high-speed data applications - Part 4:
Printed board connectors - Section 105 : Detail specification
for 9 mm circular connector with 3 to 8 contacts for use in a
wide range of applications including the telecommunication and
audio industry
| PPUB
| B | 1995-08 | Webstore | ||
IEC 61076-4-106 Ed. 1.0Cable-to-board modular connectors with assessed quality, shielded against electromagnetic interferences, having a basic grid of 2,0 mm and terminations on a multiple grid of 0,5 mm, fully shielded | DEL
| E | 48B(NL)110 | |||
IEC 61076-4-107 Ed. 1.0Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality - Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations | PPUB
| B | 1996-12 | yes | Webstore | |
IEC 61076-4-108 Ed. 1.0Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1 | PPUB
| E | 1999-04 | yes | Webstore | |
IEC 61076-4-109 Ed. 1.0Detail specification for printed board connectors, 8 or 16 way,
having a grid of 2,54 mm (0,100 in) for use with active cards
| DEL
| E | 48B/425 | |||
IEC 61076-4-110 Ed. 1.0Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
| PPUB
| B | 2002-09 | yes | Webstore | |
IEC 61076-4-111 Ed. 1.0Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1 | WPUB
| E | 1999-08 | yes | ||
IEC 61076-4-112 Ed. 1.0Detail specification - Connectors with assessed quality, for use in d.c., low-frequency analogue and digital high speed data applications - Part 4: Two-part connectors for printed boards for basic grid of 2.00 mm, with square male contacts of o.50 x 0.50 mm | DREJ
| E | yes | |||
IEC 61076-4-113 Ed. 1.0Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
| PPUB
| B | 2000-01 | yes | Webstore | |
IEC 61076-4-113 ff Ed. 1.0Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications | MERGED
| B | 2011-09 | |||
IEC 61076-4-114 Ed. 1.0Connectors for electronic equipment - Part 4-114: Printed board connectors - Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm | WPUB
| E | 2002-12 | yes | ||
IEC 61076-4-115 Ed. 1.0Connectors for electronic equipment - Part 4-115: Printed board connectors - Backplane connector for InfiniBand equipment | PPUB
| B | 2002-12 | yes | Webstore | |
IEC/PAS 61076-4-115 Ed. 1.0Connectors for electronic equipment - Part 4-115: Printed board connectors - Detail specification for a single-part hybrid connector, with a section of high-speed differential pair connections, and a section of low-speed, power and ground connections between printed boards and backplanes, in accordance with IEC 60917 | DELPUB
| E | ||||
IEC 61076-4-116 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 61076-4-116 am1 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 4-116: Printed board connectors - Detail specification for a high-speed two-part connector with integrated shielding function | 1CD
| E | 2014-06 | yes | ||
IEC 61076-5 Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality - Sectional specification | WPUB
| B | 1996-11 | yes | ||
IEC 61076-6 Ed. 1.0Connectors for electronic equipment - Part 6: Loose part contacts - Sectional specification
| WPUB
| B | 2003-08 | yes | ||
IEC 61076-7 Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specification
| PPUB
| B | 2000-02 | yes | Webstore | |
IEC 61076-7 fE Ed. 1.0Connectors for use in d.c., low-frequency analogue and digital high speed data applications - Part 7: Cable outlet accessories with assessed quality, including qualification and capability approval - Sectional specifiation | MERGED
| B | ||||
IEC 61076-7-001 Ed. 1.0Connectors for electronic equipment - Part 7-001: Cable outlet accessories - Blank detail specification | PPUB
| B | 2001-12 | yes | Webstore | |
IEC 61076-7-100 Ed. 1.0Connectors for electronic equipment - Product requirements - Part 7-100: Cable outlet accessories - Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system | PPUB
| B | 2006-06 | yes | Webstore | |
IEC/TS 61586 Ed. 1.0Estimation of the reliability of electrical connectors
| PPUB
| B | 1997-09 | Webstore | ||
IEC 61984 Ed. 1.0Connectors - Safety requirements and tests
| DELPUB
| B | 2001-05 | yes | ||
IEC 61984 Ed. 2.0Connectors - Safety requirements and tests | PPUB
| B | 2008-10 | yes | Webstore | |
IEC 61984 fC1 Ed. 2.0Corrigendum 1 - Connectors - Safety requirements and tests
| PPUB
| B | Webstore | |||
IEC 62197-1 Ed. 1.0Connectors for electronic equipment - Quality assessment requirements - Part 1: Generic specification | PPUB
| B | 2006-05 | yes | Webstore | |
IEC 62449 Ed. 1.0Connectors for electronic equipment - Product requirements - Detail specification for unshielded SCA-2 (Single Connector Attach-2) connectors unshielded | DEL
| E | 2007-09 | |||
IEC/TS 62450 Ed. 1.0Technical specification for 40-Pin SCA 2 connector with parallel selection | DEL
| E | 2008-12 | |||
IEC 62451 Ed. 1.0HSSDC-2 Shielded connectors | DEL
| E | 2009-06 | |||
IEC/TS 62452 Ed. 1.0Testing and Performance Requirements for High Speed Serial and Parallel-Serial Copper Links | DEL
| E | 2009-02 | |||
IEC/TR 62652 Ed. 1.0Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications | PPUB
| E | 2010-04 | no | Webstore |
125 kB
67 kB