International
Electrotechnical
Commission
International Standards and Conformity Assessment
for all electrical, electronic and related technologies
SC 65A |
System aspects |
SC 65A Project files
 Project Reference |  Current Stage | Language | Frcst Date | CLC | Document Reference | Downloads |
|---|---|---|---|---|---|---|
PNW 65A-262 Ed. 1.0Amendment to IEC 61326-1, 1997: Test configurations and performance criterias for portable test and measurement equipment, powered by batteries or from the circuit being measured (e.g. Multimeters Loop Testers etc.) used at frequencies up to 20 kHz | DEL
| E | 65A/262 | |||
PNW 65a-504 Ed. 1.0IEC 61326-3-3: Principles for immunity testing of safety-related systems and equipment used therein against electromagnetic phenomena (TS) | DEL
| E | 65A/504 | |||
IEC 60654-1 Ed. 2.0Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions | PPUB
| B | yes | Webstore | ||
IEC 60654-2 Ed. 1.0Operating conditions for industrial-process measurement and control equipment. Part 2: Power | PPUB
| B | Webstore | |||
IEC 60654-2 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60654-3 Ed. 1.0Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences | PPUB
| B | Webstore | |||
IEC 60654-4 Ed. 1.0Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences | PPUB
| B | Webstore | |||
IEC 60801-1 Ed. 1.0Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction | WPUB
| B | ||||
IEC 60801-1 Ed. 2.0Systematic review of IEC 60801-1 (1984) | DEL
| B | ||||
IEC 60801-2 Ed. 2.0Electromagnetic compatibility for industrial-process measurement
and control equipment - Part 2: Electrostatic discharge
requirements
| WPUB
| B | ||||
IEC 60801-2 Ed. 3.0Systematic review of IEC 801-2 Ed. 2. (1991)
| DEL
| B | ||||
IEC 60801-3 Ed. 1.0Electromagnetic compatibility for industrial-process measurement and control equipment. Part 3: Radiated electromagnetic field requirements | DELPUB
| B | ||||
IEC 60801-4 Ed. 1.0Electromagnetic compatibility for industrial-process measurement
and control equipment. Part 4: Electrical fast transient/burst
requirements
| WPUB
| B | ||||
IEC 60801-4 Ed. 2.0Systematic review of IEC 801-4 (1988)
| DEL
| B | ||||
IEC 61000-4-3 Ed. 1.0Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 3: Radiated, radio-frequency, electromagnetic field immunity test | DELPUB
| B | yes | |||
IEC 61000-4-5 Ed. 1.0Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test | DELPUB
| B | yes | |||
IEC 61000-4-6 Ed. 1.0Electromagnetic compatibility (EMC) - Part 4: Testing and
measurement techniques - Section 6: Immunity to conducted
disturbances, induced by radio-frequency fields
| DELPUB
| B | yes | |||
IEC 61069-1 Ed. 1.0Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 1: General considerations and methodology | PPUB
| B | Webstore | |||
IEC 61069-1 Ed. 2.0Systematic review of IEC 61069-1 (1991) | DEL
| B | ||||
IEC 61069-2 Ed. 1.0Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 2: Assessment methodology | PPUB
| B | Webstore | |||
IEC 61069-3 Ed. 1.0Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 3: Assessment of system functionality | PPUB
| B | 1996-08 | yes | Webstore | |
IEC 61069-4 Ed. 1.0Industrial-process measurement and control - Evaluation of
system properties for the purpose of system assessment - Part 4:
Assessment of system performance
| PPUB
| B | 1998-06 | yes | Webstore | |
IEC 61069-5 Ed. 1.0Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability | PPUB
| B | yes | Webstore | ||
IEC 61069-6 Ed. 1.0Industrial-process measurement and control - Evaluation of
system properties for the purpose of system assessment - Part 6:
Assessment of system operability
| PPUB
| B | 1999-03 | yes | Webstore | |
IEC 61069-7 Ed. 1.0Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
| PPUB
| B | 1986-09 | yes | Webstore | |
IEC 61069-8 Ed. 1.0Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 8: Assessment of non-task-related system properties | PPUB
| B | 1986-08 | yes | Webstore | |
IEC 61326 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements | DELPUB
| B | 2002-03 | no | ||
IEC 61326 f1 Ed. 2.0IEC 61326-F1- Annex F: Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning | MERGED
| B | no | 65A/323 | ||
IEC 61326 fC1 Ed. 1.0Corrigendum 1 | DELPUB
| B | ||||
IEC 61326 ff Ed. 2.0Annex E: Test configuration, operational conditions
and performance criteria for portable test, measuring and
monitoring equipment used in low voltage distribution systems | MERGED
| F | ||||
IEC 61326-1 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | DELPUB
| B | 2005-12 | yes | ||
IEC 61326-1 Ed. 1.1Electrical equipment for measurement, control and laboratory use - EMC requirements | DELPUB
| B | ||||
IEC 61326-1 Ed. 1.2Electrical equipment for measurement, control and laboratory use - EMC requirements | DELPUB
| B | ||||
IEC 61326-1 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 61326-1 f1 Ed. 1.0Electrical equipment for measurement, control and laboratory use
- EMC requirements - Part 1: General requirements
| DELPUB
| B | yes | |||
IEC 61326-1 fC1 Ed. 1.0Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements | DELPUB
| B | ||||
IEC 61326-1 fC2 Ed. 1.0Corrigendum 2 - Electrical equipment for measurement, control and
laboratory use - EMC requirements - Part 1: General requirements
| DELPUB
| B | 2010-02 | |||
IEC 61326-1 am1 f1 Ed. 1.0Amendment 1
| DELPUB
| B | ||||
IEC 61326-1 am2 f1 Ed. 1.0Amendment 2 | DELPUB
| B | ||||
IEC 61326-2-1 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications | DELPUB
| B | 2005-12 | yes | ||
IEC 61326-2-1 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications | PPUB
| B | 2012-10 | yes | Webstore | |
IEC 61326-2-2 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | DELPUB
| B | 2005-12 | yes | ||
IEC 61326-2-2 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | PPUB
| B | 2012-10 | yes | Webstore | |
IEC 61326-2-2 fC1 Ed. 1.0Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and perofrmance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems | DELPUB
| B | ||||
IEC 61326-2-3 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning | DELPUB
| B | 2006-07 | yes | ||
IEC 61326-2-3 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 61326-2-4 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 | DELPUB
| B | 2006-06 | yes | ||
IEC 61326-2-4 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 61326-2-4 fC1 Ed. 1.0Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 | DELPUB
| B | ||||
IEC 61326-2-5 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2 | DELPUB
| B | 2006-06 | yes | ||
IEC 61326-2-5 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with field bus interfaces according to IEC 61784-1 | PPUB
| B | 2012-10 | yes | Webstore | |
IEC 61326-2-6 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | DELPUB
| B | 2005-12 | yes | ||
IEC 61326-2-6 Ed. 2.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 61326-2-6 fC1 Ed. 1.0Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | DELPUB
| B | ||||
IEC 61326-3-1 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications | PPUB
| B | 2008-01 | yes | Webstore | |
IEC 61326-3-1 fC1 Ed. 1.0Corrigendum 1 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications | PPUB
| B | Webstore | |||
IEC 61326-3-2 Ed. 1.0Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment | PPUB
| B | 2008-01 | yes | Webstore | |
IEC 61326-3-2 fI1 Ed. 1.0Interpretation sheet 1 for IEC 61326-3-2 Ed. 1, Note c in Table 1b | APUB
| B | 2012-08 | 65A/632 | ||
IEC 61326-20 Ed. 1.0Electromagnetic compatibility (EMC) requirements for electrical
equipment for measurement, control and laboratory use - Part 20:
Particular requirements for equipment used in laboratories or
test and measurement areas with a controlled electromagnetic
environment
| MERGED
| B | ||||
IEC 61326-30 Ed. 1.0Electromagnetic compatibility (EMC) requirements for electrical
equipment for measurement, control and laboratory use - Part 30:
Particular requirements for portable test and measurement
equipment that is powered by battery or from the circuit being
measured
| MERGED
| B | ||||
IEC/TR 61508-0 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 | PPUB
| B | 2005-05 | Webstore | ||
IEC 61508-1 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
| DELPUB
| B | 1998-12 | |||
IEC 61508-1 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-1 f1 Ed. 2.0Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements | MERGED
| E | 65A/331 | |||
IEC 61508-1 fC1 Ed. 1.0Corrigendum 1 | DELPUB
| B | ||||
IEC 61508-2 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems | DELPUB
| B | 2000-04 | |||
IEC 61508-2 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-2 f1 Ed. 2.0Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/ programmable electronic safety-related systems | MERGED
| E | 65A/331 | |||
IEC 61508-3 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
| DELPUB
| B | 1998-12 | |||
IEC 61508-3 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-3 f1 Ed. 2.0Maintenance procedure on IEC 61508-3: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
| MERGED
| E | 65A/314 | |||
IEC 61508-3 fC1 Ed. 1.0Corrigendum 1 | DELPUB
| B | ||||
IEC 61508-4 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations | DELPUB
| B | 1998-12 | |||
IEC 61508-4 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-4 fC1 Ed. 1.0Corrigendum 1 | DELPUB
| B | ||||
IEC 61508-4 am1 Ed. 1.0Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations | MERGED
| E | 65A/331 | |||
IEC 61508-5 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety related systems - Part 5: Examples of methods for the determination of safety integrity levels
| DELPUB
| B | 1998-12 | |||
IEC 61508-5 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
| PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-5 f1 Ed. 2.0Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels | MERGED
| E | 65A/331 | |||
IEC 61508-5 fC1 Ed. 1.0Corrigendum 1 | DELPUB
| B | ||||
IEC 61508-6 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 | DELPUB
| B | 2000-04 | |||
IEC 61508-6 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-6 f1 Ed. 2.0Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 | MERGED
| E | 65A/331 | |||
IEC 61508-7 Ed. 1.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures | DELPUB
| B | 2000-03 | |||
IEC 61508-7 Ed. 2.0Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures | PPUB
| B | 2010-03 | yes | Webstore | |
IEC 61508-7 f1 Ed. 2.0Maintenance Cycle Report on 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures | MERGED
| E | 65A/331 | |||
IEC 61511-1 Ed. 1.0Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements | PPUB
| B | 1997-11 | no | Webstore | |
IEC 61511-1 Ed. 2.0Functional safety - Safety instrumented systems for the process industry sector - Normative (uon) Part 1: Framework, definitions, system, hardware and software requirements | 1CD
| E | 2015-10 | yes | ||
IEC 61511-1 fC1 Ed. 1.0Corrigendum 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements | PPUB
| B | Webstore | |||
IEC 61511-1 ff Ed. 1.0Functional safety - Safety instrumented systems for the process
industry sector - Part 1: Framework, definitions, system,
hardware and software requirements
| MERGED
| F | ||||
IEC 61511-2 Ed. 1.0Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 | PPUB
| B | 2002-10 | no | Webstore | |
IEC 61511-2 Ed. 2.0Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1- Informative | 1CD
| E | 2015-10 | yes | ||
IEC 61511-2 ff Ed. 1.0Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1 | MERGED
| F | ||||
IEC 61511-3 Ed. 1.0Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels
| PPUB
| B | 2001-12 | no | Webstore | |
IEC 61511-3 Ed. 2.0Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels-Informative | 1CD
| E | yes | |||
IEC 61511-3 fC1 Ed. 1.0Corrigendum 1 - Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels | PPUB
| E | Webstore | |||
IEC 61511-3 ff Ed. 1.0Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels | MERGED
| F | ||||
IEC 61512-1 Ed. 1.0Batch control - Part 1: Models and terminology
| PPUB
| B | Webstore | |||
IEC 61512-2 Ed. 1.0Batch control - Part 2: Data structures and guidelines for languages
| PPUB
| B | Webstore | |||
IEC 61512-3 Ed. 1.0Batch control - Part 3: General and site recipe models and representation | PPUB
| B | 2008-06 | yes | Webstore | |
IEC/PAS 61512-3 Ed. 1.0Batch control - Part 3: General and site recipe models and representation | DELPUB
| E | 2004-12 | 65A/410 | ||
IEC 61512-4 Ed. 1.0Batch control - Part 4: Batch production records | PPUB
| B | 2009-10 | yes | Webstore | |
IEC/PAS 61512-4 Ed. 1.0Batch control - Part 4: Batch production records | DELPUB
| E | 2007-12 | yes | 65A/497A | |
IEC 62264-1 ff Ed. 1.0Enterprise-control system integration - Part 1: Models and terminology | MERGED
| F | ||||
IEC 62264-2 fF Ed. 1.0Enterprise-control system integration - Part 2: Object model attributes | MERGED
| F | ||||
IEC 62682 Ed. 1.0Management of Alarm Systems for the Process Industries | CCDV
| E | 2014-03 | yes |
194 kB
29 kB