PNW 46A-362 Ed. 1.0

Pulse/Step Return Loss from measurement in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)

PNW 46A-416 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-1:Test for ovality

PNW 46A-417 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-2: Test for tensile strength and elongation of the drop cable copper-clad steel inner conductor

PNW 46A-418 Ed. 1.0

Coaxial cables for use in cables for use in cabled distribution networks - Part 2-3: Test for torsion characteristics of copper-clad metals

PNW 46A-419 Ed. 1.0

Coaxial cables for coaxial cables for use in cabled distribution networks - Part 2-4: Test for adhesion characteristics

PNW 46A-420 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-5: Test for bending characteristics

PNW 46A-421 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-6: Test for flexing characteristics of cable

PNW 46A-422 Ed. 1.0

Coxial cables for use in cabled distribution networks - Part 2-7: Test for maximum pulling force of cable

PNW 46A-423 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-8: Test for crush resistance of cable

PNW 46A-424 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-9: Test for abrasion resistance of cable sheath and marking

PNW 46A-425 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-11: Test for cold bend performance of cable

PNW 46A-426 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-13: Test for resistance of cable inner and outer conductors

PNW 46A-427 Ed. 1.0

Coaxial cables for use in cabled distribution network - Part 2-14: Test for insulation resistance of cable dielectric

PNW 46A-428 Ed. 1.0

Coaxial cables for use in cabled distribution network - Part 2-16: Test for withstand voltage of cable sheath

PNW 46A-429 Ed. 1.0

Coaxial cables for use in cabled distribution network - Part 2-16: Test for withstand voltage of cable sheath

PNW 46A-430 Ed. 1.0

Coaxial cables for use in cabled distribution network - Part 2-17: Test for mean characteristic impedance

PNW 46A-431 Ed. 1.0

Coaxial cables for use in cabled distribution network - Part 2-18: Test for relative propagation velocity (velocity ratio)

PNW 46A-432 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-19: Test for uniformity of impedance

PNW 46A-433 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-20: Test for attenuation and phase coefficient

PNW 46A-434 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-21: Test for current carrying capacity of cable

PNW 46A-435 Ed. 1.0

Coaxial cables for use in cabled distribution networks - Part 2-22: Test for screening effectiveness with GTEM fixture

PNW 46A-518 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - General

PNW 46A-519 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - PVC insulation compounds

PNW 46A-520 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - PVC sheathing compounds

PNW 46A-521 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - PE insulation

PNW 46A-522 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - PE sheathing

PNW 46A-523 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - Polypropylene insulation compounds

PNW 46A-524 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - Halogen free flame retardant insulation compounds

PNW 46A-525 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds

PNW 46A-526 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - Filling compounds for filled cables

PNW 46A-527 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - Cross-linked PE insulation compounds

PNW 46A-528 Ed. 1.0

Communication cables - Part XX: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing

PNW 46A-880 Ed. 1.0

IEC 61196-8-2: Coaxial communication cables - Part 8-2: Detail specification for 50-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-881 Ed. 1.0

IEC 61196-8-3: Coaxial communication cables - Part 8-3: Detail specification for 50-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-882 Ed. 1.0

IEC 61196-8-4: Coaxial communication cables - Part 8-4: Detail specification for 50-141 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-883 Ed. 1.0

IEC 61196-8-5: Coaxial communication cables - Part 8-5: Detail specification for 50-250 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-884 Ed. 1.0

IEC 61196-8-6: Coaxial communication cables - Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-885 Ed. 1.0

IEC 61196-8-7: Coaxial communication cables - Part 8-7: Detail specification for 75-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-886 Ed. 1.0

IEC 61196-8-8: Coaxial communication cables - Part 8-8: Detail specification for 75-141 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-887 Ed. 1.0

IEC 61196-8-9: Coaxial communication cables - Part 8-9: Detail specification for 75-250 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

PNW 46A-1055 Ed. 1.0

Coaxial Communication Cables Part 1-2: Repair and Substitution of Damaged Buried Cables

PNW 46a-1058 Ed. 1.0

Coaxial Communication Cables ?Part 1-212: UV stability

PNW 46a-1112 Ed. 1.0

Coaxial Communication Cables - Part 1-215: Dimensional stability

PNW 46a-1114 Ed. 1.0

Coaxial Communication Cables - Part 1-217: Resistance to soldering

PNW 46a-1121 Ed. 1.0

IEC 61196-1-110: Coaxial Communication Cables - Part 1-110: Continuity

PNW 46a-1122 Ed. 1.0

IEC 61196-1-114: Coaxial Communication Cables - Part 1-144: Test for inductance

PNW 46a-1129 Ed. 1.0

COAXIAL COMMUNICATION CABLES Part 1-116: Electrical test methods - Test for characteristic impedance with time domain reflectometry (TDR)

PNW 46a-1133 Ed. 1.0

COAXIAL COMMUNICATION CABLES ?Part 11-1: Blank detail specification for semi-rigid cables with polyethylene (PE) dielectric

PNW 46a-1134 Ed. 1.0

COAXIAL COMMUNICATION CABLES ?Part 11: Sectional specification for semi-rigid cables with polyethylene (PE) dielectric

IEC 60078 Ed. 3.0

Characteristic impedances and dimensions of radio-frequency coaxial cables

IEC 60096-0-1 Ed. 2.0

Radio-frequency cables. Part 0: Guide to the design of detailed specifications - Section One: Coaxial cables

IEC 60096-0-1 Ed. 2.1

Radio Frequency cables - Part 0-1: Guide to the design of detail specifications - Coaxial cables

IEC 60096-0-1 Ed. 3.0

Radio frequency cables - Part 0-1: Guide to the design of detail specifications - Coaxial cables

IEC 60096-0-1 f1 Ed. 3.0

Systematic review of IEC 96-0-1 (1990)

IEC 60096-0-1 am1 Ed. 2.0

Amendment 1

IEC 60096-0-1 am2 Ed. 2.0

Amendment 2 to IEC 60096-0-1: Guide to the design of detailed specifications - Section One: Coaxial cables - Current carrying capacity (ampacity)

IEC 60096-1 Ed. 4.0

Radio-frequency cables. Part 1: General requirements and measuring methods

IEC 60096-1 am2 Ed. 4.0

Amendment No. 2

IEC 60096-2 Ed. 1.0

Radio-frequency cables. Part 2: Relevant cable specifications. (Consolidated edition)

IEC 60096-2 am1 Ed. 1.0

Amendment No. 1

IEC 60096-2 am2 Ed. 1.0

Amendment to IEC 96-2, regarding the displacement of a dielectric with respect to the inner conductor after the test for dimensional stability

IEC 60096-3 Ed. 1.0

Radio-frequency cables. Part 3: General requirements and tests for single-unit coaxial cables for use in cabled distribution systems

IEC 60096-4-1 Ed. 1.0

Radio-frequency cables. Part 4: Specification for superscreened cables - Section One: General requirements and test methods

IEC 60096-4-1 Ed. 2.0

Systematic review of IEC 96-4-1 (1990)

IEC 60339-1 Ed. 1.0

General purpose rigid coaxial transmission lines and their associated flange connectors. Part 1: General requirements and measuring methods

IEC 60339-2 Ed. 1.0

General purpose rigid coaxial transmission lines and their associated flange connectors. Part 2: Detail specifications

IEC 60966-1 Ed. 1.0

Radio-frequency and coaxial cable assemblies. Part 1: Generic specification - General requirements and test methods

IEC 60966-1 f2 Ed. 2.0

Revision C of IEC 966-1: Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods

IEC 60966-1 f3 Ed. 2.0

Revision of the absorbing clamp method for the measurement of screening attenuation of cables (cable assemblies and connectors)

IEC 60966-1 am1 Ed. 1.0

Amendment No. 1

IEC 60966-1 am2 Ed. 1.0

Amendment No. 2

IEC 60966-1 am2 f1 Ed. 1.0

Amendment No. 2 to IEC 966-1

IEC 60966-2-1 Ed. 1.1

Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies

IEC 60966-2-1 am1 Ed. 1.0

Amendment No. 1

IEC 60966-2-2 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies

IEC 60966-2-3 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assembly

IEC 60966-2-4 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers (Frequency range 0 to 3000 MHz, IEC 60169-2 connectors)

IEC 60966-2-5 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 60169-2 connectors

IEC 60966-2-6 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3 000 MHz, IEC 60169-24 connectors

IEC 60966-3 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 3: Sectional specification for semi-flexible coaxial cable assemblies

IEC 60966-3-1 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 3-1: Blank detail specification for semi-flexible coaxial cable assemblies

IEC 60966-3-2 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 3-2: Detail specification for a flexible coaxial cable assemblies for GSM use (0,8 GHz - 1 GHz)

IEC 60966-4 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies

IEC 60966-4-1 Ed. 1.0

Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies

IEC 61196-1 Ed. 1.0

Radio-frequency cables - Part 1: Generic specification - General, definitions, requirements and test methods

IEC 61196-1 Ed. 2.0

Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements

IEC 61196-1 f1 Ed. 2.0

Maintenance cycle report on Radio-frequency cables - Part 1: Generic specification - General, definitions, requirements and test methods

IEC 61196-1 am1 Ed. 1.0

Amendment 1

IEC 61196-1 am1 f1 Ed. 1.0

Revision of the 'IEC Triaxial Method' for measuring surface transfer impedances of coaxial contructions

IEC 61196-1 am1 f3 Ed. 1.0

Amendment to IEC 1196-1 - Addition of screening attenuation - Triaxial method for measuring the screening attenuation 'as' up to and above 3 GHz

IEC 61196-1 am1 f4 Ed. 1.0

Amendment to IEC 1196-1 Addition of clause 12.5 - Test for low frequency mechanically induced microphony in coaxial cables

IEC 61196-1 am1 f5 Ed. 1.0

Recommended surface transfer impedance and screening attenuation limits of coaxial r.f. cables

IEC 61196-1 am1 f6 Ed. 1.0

Guidance for the time domain limits of the surface transfer impedance for flexible r.f. cables

IEC 61196-1 am1 f7 Ed. 1.0

Amendment to IEC 61196-1 - Correction of errors

IEC 61196-1-1 Ed. 1.0

Coaxial communication cables - Part 1-1: Capability approval for coaxial cables

IEC 61196-1-1 f1 Ed. 1.0

Radio-frequency cables - Part 1: Generic specification - Section 1: Definitions and requirements

IEC 61196-1-2 Ed. 1.0

Radio-frequency cables - Part 1: Generic specification - General, definitions, requirements and test methods

IEC 61196-1-100 Ed. 1.0

Coaxial communication cables - Part 1-100: Electrical test methods - General requirements

IEC 61196-1-100 Ed. 2.0

Coaxial communication cables - Part 1-100: Electrical test methods - General requirements

IEC 61196-1-101 Ed. 1.0

Coaxial communication cables - Part 1-101: Electrical test methods - Test for conductor d.c. resistance of cable

IEC 61196-1-102 Ed. 1.0

Coaxial communication cables - Part 1-102: Electrical test methods - Test for insulation resistance of cable dielectric

IEC 61196-1-103 Ed. 1.0

Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable

IEC 61196-1-103 Ed. 2.0

Coaxial communication cables - Part 1-103: Electrical test methods - Test for capacitance of cable

IEC 61196-1-104 Ed. 1.0

Coaxial communication cables - Part 1-104: Electrical test methods - Test for capacitance stability of cable

IEC 61196-1-104 Ed. 2.0

Coaxial communication cables - Part 1-104: Electrical test methods - Test for capacitance stability of cable

IEC 61196-1-105 Ed. 1.0

Coaxial communication cables - Part 1-105: Electrical test methods - Test for withstand voltage of cable dielectric

IEC 61196-1-106 Ed. 1.0

Coaxial communication cables - Part 1-106: Electrical test methods - Test for withstand voltage of cable sheath

IEC 61196-1-106 f1 Ed. 1.0

Coaxial communication cables - Electrical test methods - Part 1-106: Test for withstand voltage of cable sheath

IEC 61196-1-107 Ed. 1.0

Coaxial communication cables - Part 1-107: Electrical test methods - Test for cable microphony charge level (mechanically induced noise)

IEC 61196-1-108 Ed. 1.0

Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity

IEC 61196-1-108 Ed. 2.0

Coaxial communication cables - Part 1-108: Electrical test methods - Test for characteristic impedance, phase and group delay, electrical length and propagation velocity

IEC 61196-1-109 Ed. 1.0

IEC 61196-1-109 Ed. 1.0: Coaxial communication cables - Part 1-109: Electrical test methods - Test for stability of mechanical phase

IEC 61196-1-110 Ed. 1.0

IEC 61196-1-110 Ed. 1.0: Coaxial communication cables - Part 1-110: Electrical test methods - Test for phase variation with temperature

IEC 61196-1-111 Ed. 1.0

Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant

IEC 61196-1-111 Ed. 2.0

Coaxial communication cables - Part 1-111: Electrical test methods - Test for stability of phase constant

IEC 61196-1-112 Ed. 1.0

Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance)

IEC 61196-1-113 Ed. 1.0

Coaxial communication cables - Part 1-113: Electrical test methods - Test for attenuation constant

IEC 61196-1-115 Ed. 1.0

Coaxial communication cables - Part 1-115: Electrical test methods - Test for regularity of impedance (pulse/step function return loss)

IEC 61196-1-119 Ed. 1.0

Coaxial communication cables - Part 1-119: Electrical test methods - RF power rating

IEC 61196-1-121 Ed. 1.0

Coaxial communication cables - Part 1-121: Electrical test methods - Test method for ampacity

IEC 61196-1-122 Ed. 1.0

Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables

IEC 61196-1-200 Ed. 1.0

Coaxial communication cables - Part 1-200: Environmental test methods - General requirements

IEC 61196-1-200 Ed. 2.0

Coaxial communication cables - Part 1-200: Environmental test methods - General requirements

IEC 61196-1-201 Ed. 1.0

Coaxial communication cables - Part 1-201: Environmental test methods - Test for cold bend performance of cable

IEC 61196-1-201 f1 Ed. 1.0

Coaxial communication cables - Part 1- 301: Mechanical test methods - Test for cold bend performance of cable

IEC 61196-1-203 Ed. 1.0

Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable

IEC 61196-1-205 Ed. 1.0

Coaxial communication cables - Part 1-205: Environmental test methods - Resistance to solvents and contaminating fluids

IEC 61196-1-206 Ed. 1.0

Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence

IEC 61196-1-208 Ed. 1.0

Coaxial communication cables - Part 1-208: Environmental test methods - Longitudinal pneumatic resistance

IEC 61196-1-209 Ed. 1.0

Coaxial Communication Cables ?Part 1-209: Thermal cycling

IEC 61196-1-212 Ed. 1.0

Coaxial communication cables - Environmental test methods - Part 1-212: UV-resistance

IEC 61196-1-216 Ed. 1.0

Coaxial Communication Cables - Part 1-216: Solderability

IEC 61196-1-300 Ed. 1.0

Coaxial communication cables - Mechanical test methods - Part 1-300: General requirements

IEC 61196-1-301 Ed. 1.0

Coaxial communication cables - Part 1-301: Mechanical test methods - Test for ovality

IEC 61196-1-302 Ed. 1.0

Coaxial communication cables - Part 1-302: Mechanical test methods - Test for eccentricity

IEC 61196-1-304 Ed. 1.0

Coaxial communication cables - Part 1-304: Mechanical test methods - Impact resistance

IEC 61196-1-308 Ed. 1.0

Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals

IEC 61196-1-308 Ed. 2.0

Coaxial communication cables - Part 1-308: Mechanical test methods - Test for tensile strength and elongation for copper-clad metals

IEC 61196-1-310 Ed. 1.0

Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals

IEC 61196-1-313 Ed. 1.0

Coaxial communication cables - Part 1-313: Mechanical test methods - Adhesion of dielectric and sheath

IEC 61196-1-314 Ed. 1.0

Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending

IEC 61196-1-314 Ed. 2.0

Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending

IEC 61196-1-316 Ed. 1.0

Coaxial communication cables - Part 1-316: Mechanical test methods - Test of maximum pulling force of cable

IEC 61196-1-317 Ed. 1.0

Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable

IEC 61196-1-318 Ed. 1.0

Coaxial communication cables - Part 1-318: Mechanical test methods - Heat performance tests

IEC 61196-1-324 Ed. 1.0

Coaxial communication cables - Part 1-324: Mechanical test methods - Test for abrasion resistance of cable

IEC 61196-1-325 Ed. 1.0

Coaxial communication cables - Part 1-325: Mechanical test methods - Aeolian vibration

IEC 61196-2 Ed. 1.0

Radio-frequency cables - Specifications - Part 2: Semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation - Sectional specification

IEC 61196-2 Ed. 2.0

Radio-frequency cables - Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene (PTFE) insulation

IEC 61196-2-1 Ed. 1.0

Radio-frequency cables - Part 2: Detail specification - Section 1: Coaxial cable for digital communication in horizontal floor wiring for 500 m reach and up to 10 Mb/s

IEC 61196-3 Ed. 1.0

Radio frequency cables - Part 3: Sectional specification for coaxial cables for use in local area networks

IEC 61196-3-1 Ed. 1.0

Radio-frequency cables - Part 3: Coaxial cables for digital communication in horizontal floor wiring - Section 1: Detail specification for cables of 500 m reach and up to 10 Mb/s

IEC 61196-3-2 Ed. 1.0

Radio frequency cables - Part 3-2: Coaxial cables for digital communication in horinzontal floor wiring - Detail specification for coaxial cables with solid dielectric for local area networks for 185 m reach and up to 10 Mb/s.

IEC 61196-3-3 Ed. 1.0

Radio frequency cables - Part 3-3: Coaxial cables for digital communication in horizontal floor wiring - Detail specification for coaxial cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s

IEC 61196-3-4 Ed. 1.0

Detail specification for coaxial cables with optimised braid outer conductor (screen) for use in local area networks for 185 m reach and up to 10 Mb/s

IEC 61196-4 Ed. 1.0

Radio-frequency cables - Part 4: Sectional specification for radiating cables

IEC 61196-4 Ed. 2.0

Coaxial communication cables - Part 4: Sectional specification for radiating cables

IEC 61196-5 Ed. 1.0

Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables

IEC 61196-5 Ed. 2.0

Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables

IEC 61196-5-1 Ed. 1.0

Coaxial communication cables - Part 5-1: Blank detail specification for CATV trunk and distribution cables

IEC 61196-5-1 Ed. 2.0

Coaxial communication cables - Part 5-1: Blank detail specification for CATV trunk and distribution cables

IEC 61196-6 Ed. 1.0

Coaxial communication cables - Part 6: Sectional specification for CATV drop cables

IEC 61196-6 f1 Ed. 1.0

Coaxial communication cables - Part 6: Sectional specification for CATV drop cables

IEC 61196-6-1 Ed. 1.0

Coaxial communication cables - Part 6-1: Blank detail specification for CATV drop cables

IEC 61196-6-1 f1 Ed. 1.0

Coaxial communication cables - Part 6-1: Blank detail specification for CATV drop cables

IEC 61196-7 Ed. 1.0

Coaxial communication cables - Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz

IEC 61196-8 Ed. 1.0

Coaxial communication cables - Part 8: Sectional specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric

IEC 61196-8-1 Ed. 1.0

Coaxial communication cables - Part 8-1: Blank detail specification for semi-flexible cables with polytetrafluoroethylene (PTFE) dielectric

IEC 61196-8-2 Ed. 1.0

Coaxial communication cables - Part 8-2: Detail specification for 50-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-3 Ed. 1.0

Coaxial communication cables - Part 8-3: Detail specification for 50-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-4 Ed. 1.0

Coaxial communication cables - Part 8-4: Detail specification for 50-141 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-5 Ed. 1.0

Coaxial communication cables - Part 8-5: Detail specification for 50-250 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-6 Ed. 1.0

Coaxial communication cables - Part 8-6: Detail specification for 75-047 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-7 Ed. 1.0

Coaxial communication cables - Part 8-7: Detail specification for 75-086 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-8 Ed. 1.0

Coaxial communication cables - Part 8-8: Detail specification for 75-141 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-8-9 Ed. 1.0

Coaxial communication cables - Part 8-9: Detail specification for 75-250 type semi-flexible cables with solid polytetrafluoroethylene (PTFE) insulation

IEC 61196-9 Ed. 1.0

Coaxial Communication Cables - Part 9: Sectional specification for flexible RF Coaxial Cables

IEC 61196-9-1 Ed. 1.0

Coaxial Communication Cables Part 9-1: Blank detail specification for flexible RF coaxial cables

IEC 61196-10 Ed. 1.0

Coaxial communication cables - Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric

IEC 61196-10-1 Ed. 1.0

Coaxial Communication Cables - Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric

IEC 61726 Ed. 2.0

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

IEC 61726 fF Ed. 2.0

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

IEC/TR 61726 Ed. 1.0

Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method

IEC/TR 61917 Ed. 1.0

Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screening measurements

IEC/TR 61917 f1 Ed. 2.0

Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screening measurements

IEC 61935-1 Ed. 1.0

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling

IEC 61935-1 Ed. 1.1

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 1: Installed cabling

IEC 61935-1 am1 Ed. 1.0

Amendment 1

IEC 61935-2 Ed. 1.0

Generic cabling systems - Specification for the testing of balanced communication cabling in accordance with ISO/IEC 11801 - Part 2: Patch cords and work area cords

IEC 62029-1 Ed. 1.0

Coaxial cables used in cabled distribution networks - Part 1: Generic specification and test methods

IEC 62029-2 Ed. 1.0

Coaxial cables used in cabled distribution networks - Part 2: Test methods

IEC 62029-3 Ed. 1.0

Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for distribution and trunk cables

IEC 62029-3-1 Ed. 1.0

Coaxial cables used in cabled distribution networks - Part 3-1: Blank detail specification for distribution and trunk cables

IEC 62029-4 Ed. 1.0

Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for drop cables

IEC 62029-4-1 Ed. 1.0

Coaxial cables used in cabled distribution networks - Part 4-1: Blank detail specification for drop cables

IEC/TR 62064 Ed. 1.0

Radio-frequency cables - Relationship between the surface transfer impedance and screening attenuation (A background paper to the recommended limits in IEC 61196-1, clause 14)

IEC 62153-1-1 Ed. 1.0

Metallic communication cables test methods - Part 1-1: Electrical - Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)

IEC 62153-1-2 Ed. 1.0

Metallic communication cable test methods - Part 1-2: Reflection measurement correction

IEC 62260 Ed. 1.0

Pulse/Step Return Loss from measurement in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)

IEC/PAS 62260 Ed. 1.0

Pulse/Step Return Loss from measurement in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)