International
Electrotechnical
Commission
International Standards and Conformity Assessment
for all electrical, electronic and related technologies
TC 15 |
Solid electrical insulating materials |
TC 15 Project files
 Project Reference |  Current Stage | Language | Frcst Date | CLC | Document Reference | Downloads |
|---|---|---|---|---|---|---|
PWI 15-1 Ed. 1.0IEC 60394-2/Ed2: Varnished fabrics for electrical purposes. Part 2: Methods of test | PWI
| E | ||||
PWI 15-2 Ed. 1.0IEC 60763-2/Ed3: Specification for laminated pressboard - Part 2: Methods of test | PWI
| E | ||||
PNW 15-152 Ed. 1.0Environmental topics related to solid insulating materials and simple combinations | DEL
| E | 15/152 | |||
PNW 15-418 Ed. 1.0Future IEC 60674-3-8 Ed. 1.0: Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Requirements for balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
| DEL
| E | 15/418A | |||
PNW 15-433 Ed. 1.0Future IEC 60455-3-X: Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet X: Resins for cable accessories
| DEL
| E | 15/433 | |||
PWI 15C-1 Ed. 1.0Requirements for low emission polyester resin-based materials | DEL
| E | ||||
PNW 15C-735 Ed. 1.0Flexible insulating sleeving - Part 1: Definitions and general
requirements (Revision of IEC 684-1)
| DEL
| B | 15C/735 | |||
PNW 15C-736 Ed. 1.0Flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheet 300: Glass textile fibre
sleeving, braided, uncoated (Revision of IEC 684-3-300)
| DEL
| B | 15C/736 | |||
PNW 15C-737 Ed. 1.0Flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheet 320: Polyethylene
terephthalate textile, lightly impregnated (Revision of IEC
684-3-320)
| DEL
| B | 15C/737 | |||
PNW 15C-738 Ed. 1.0Flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheets 403 to 405: Glass
textile sleeving with acrylic coating (Revision of IEC 684-3-403
to 405)
| DEL
| B | 15C/738 | |||
PNW 15C-739 Ed. 1.0Flexible insulating sleeving - Part 3: Specification requirements
for individual types of sleeving - Sheets 406 to 408: Glass
textile sleeving with PVC coating (Revision of IEC 684-3-406 to
408)
| DEL
| B | 15C/739 | |||
PNW 15C-761 Ed. 1.0IEC 1629-3-1: Aramid pressboard for electrical purposes - Part 3:
Specifications for individual materials - Sheet 1: Aramid
pressboard, types APB-LD, APB, APB-C and APB-HD
| DEL
| B | 15C/761 | |||
PNW 15C-873 Ed. 1.0Amendment No. 1 to IEC 60454-3-1: Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive | DEL
| E | 15C/873 | |||
PNW 15C-882 Ed. 1.0IEC 60684-300, 2nd ed: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated | DEL
| E | 15C/882 | |||
PNW 15C-883 Ed. 1.0IEC 60684-320, 2nd Ed: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated | DEL
| E | 15C/883 | |||
PNW 15C-884 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic coating (Revision of IEC 60684-3-403/405) | DEL
| E | 15C/884 | |||
PNW 15C-885 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (Revision of IEC 60684-3-406/408) | DEL
| E | 15C/885 | |||
PNW 15C-899 Ed. 1.0IEC 60684-1, 2nd Ed.: Flexible insulating sleeving - Part 1: Definitions and general requirements | DEL
| E | 15C/899 | |||
PNW 15C-953 Ed. 1.0IEC 60684-3-229, 1st Ed.: Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 229: Heat shrinkable, semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | DEL
| E | 15C/953 | |||
PNW 15C-954 Ed. 1.0IEC 60684-3-280, 1st Ed.: Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 280: Heat shrinkable polyolefin sleeving anti tracking | DEL
| E | 15C/954 | |||
PNW 15C-955 Ed. 1.0IEC 60684-3-281, 1st Ed.: Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 281: Heat shrinkable polyolefin sleeving - conductive | DEL
| E | 15C/955 | |||
PNW 15C-956 Ed. 1.0IEC 60684-3-282, 1st Ed.: Flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 282: Heat shrinkable polyolefin sleeving stress-controlling | DEL
| E | 15C/956 | |||
PNW 15C-963 Ed. 1.0IEC 60684-3-247: Flexible insulating sleeving - Heat-shrinkable polyolefin sleeving, dual-wall not flame retarded, shrink ratio 3:1 | DEL
| E | 15C/963 | |||
DEL 819-3-4 Ed. 1.0Specification for non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 7: Dry-laid non-woven paper; PETP fibre | DEL
| E | 15C(Sec.)308 | |||
IEC 60370 Ed. 1.0Test procedure for thermal endurance of insulating varnishes -
Electric strength method
| PPUB
| B | Webstore | |||
IEC 60370 Ed. 2.0Systematic review of IEC 370 (1971)
| DEL
| B | ||||
IEC 60371-1 Ed. 2.0Specification for insulating materials based on mica. Part 1: Definitions and general requirements | DELPUB
| B | ||||
IEC 60371-1 Ed. 3.0Specification for insulating materials based on mica - Part 1: Definitions and general requirements
| PPUB
| B | yes | Webstore | ||
IEC 60371-2 Ed. 2.0Specification for insulating materials based on mica. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60371-2 Ed. 3.0Specification for insulating materials based on mica - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 60371-2 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 15C(C.O.)325 | |||
DEL 60371-3-1 Ed. 3.0Systematic review of IEC 371- 3-1 Ed. 2 (1984)
| DEL
| B | ||||
IEC 60371-3-1 Ed. 2.0Specification for insulating materials based on mica. Part 3:
Specifications for individual materials. Sheet 1: Commutator
separators and materials
| DELPUB
| B | ||||
IEC 60371-3-1 Ed. 3.0Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 1: Commutator separators and materials | PPUB
| E | 2006-07 | yes | Webstore | |
DEL 60371-3-2 Ed. 2.0Systematic review of IEC 60371-3-2 (1991) | DEL
| B | ||||
IEC 60371-3-2 Ed. 1.0Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper | DELPUB
| B | ||||
IEC 60371-3-2 Ed. 2.0Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 2: Mica paper
| PPUB
| E | yes | Webstore | ||
IEC 60371-3-3 Ed. 1.0Specification for insulating materials based on mica. Part 3:
Specifications for individual materials. Sheet 3: Rigid mica
materials for heating equipment
| PPUB
| B | Webstore | |||
IEC 60371-3-3 Ed. 2.0Systematic review of IEC 371-3-3 (1983)
| DEL
| B | ||||
IEC 60371-3-4 Ed. 1.0Specification for insulating materials based on mica - Part 3: Specification for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder | PPUB
| B | Webstore | |||
IEC 60371-3-4 am1 Ed. 1.0Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder | PPUB
| B | 2006-10 | yes | Webstore | |
IEC 60371-3-4 am1 ff Ed. 1.0Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder | MERGED
| F | 2009-06 | |||
IEC 60371-3-5 Ed. 1.0Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) | DELPUB
| B | 15C(C.O.)292 | |||
IEC 60371-3-5 Ed. 2.0Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5: Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
| PPUB
| E | yes | Webstore | ||
IEC 60371-3-6 Ed. 1.0Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder | PPUB
| B | Webstore | |||
IEC 60371-3-6 am1 Ed. 1.0Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder
| PPUB
| B | 2006-10 | yes | Webstore | |
IEC 60371-3-6 am1 ff Ed. 1.0Amendment 1 - Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder | MERGED
| F | 2009-06 | |||
IEC 60371-3-7 Ed. 1.0Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping | PPUB
| B | yes | Webstore | ||
IEC 60371-3-7 am1 Ed. 1.0Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
Ruban à base de papier mica, film polyester et liant époxyde pour
conducteurs élémentaires
| PPUB
| B | 2006-10 | yes | Webstore | |
IEC 60371-3-7 am1 ff Ed. 1.0Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping | MERGED
| F | 2009-06 | |||
IEC 60371-3-8 Ed. 1.0Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables | PPUB
| B | yes | Webstore | ||
IEC 60371-3-8 am1 Ed. 1.0Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables | PPUB
| B | 2007-05 | yes | Webstore | |
IEC 60371-3-8 am1 ff Ed. 1.0Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flamme-resistant security cables | MERGED
| F | 2009-06 | |||
IEC 60371-3-9 Ed. 1.0Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite | PPUB
| B | yes | Webstore | ||
IEC 60371-3-9 am1 Ed. 1.0Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite | PPUB
| B | 2007-05 | yes | Webstore | |
IEC 60371-3-9 am1 ff Ed. 1.0Amendment 1 - Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite | MERGED
| F | 2009-06 | |||
IEC 60394-1 Ed. 1.0Varnished fabrics for electrical purposes. Part 1: Definitions
and general requirements
| PPUB
| B | Webstore | |||
IEC 60394-1 Ed. 2.0Systematic review of IEC 394-1 (1972)
| DEL
| B | ||||
IEC 60394-2 Ed. 1.0Varnished fabrics for electrical purposes. Part 2: Methods of
test
| PPUB
| B | Webstore | |||
IEC 60394-2 f1 Ed. 2.0Systematic review of IEC 394-2 (1972)
| DEL
| B | ||||
IEC 60394-3-1 Ed. 1.0Varnished fabrics for electrical purposes. Part 3:
Specifications for individual materials. Sheet 1: Oleoresinous
varnish-cotton base, OR/C
| PPUB
| B | Webstore | |||
IEC 60394-3-1 Ed. 2.0Systematic review od IEC 394-3-1 (1976)
| DEL
| B | ||||
IEC 60394-3-2 Ed. 1.0Varnished fabrics for electrical purposes. Part 3:
Specifications for individual materials. Sheet 2: Glass-fabric
based varnished fabrics with epoxy, polyuréthane, silicone,
polyester, bituminous or oleoresinous varnish
| PPUB
| B | Webstore | |||
IEC 60394-3-2 Ed. 2.0Systematic review of IEC 394-3-2 (1988)
| DEL
| B | ||||
IEC 60454-1 Ed. 2.0Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 1: General requirements | PPUB
| B | Webstore | |||
IEC 60454-1 Ed. 3.0Systematic review of IEC 60454-1 (1992) | DEL
| B | ||||
IEC 60454-2 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60454-2 Ed. 2.0Specification for pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test | DELPUB
| B | 1994-11 | yes | ||
IEC 60454-2 Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test | PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60454-2 fC1 Ed. 3.0Corrigendum 1 - Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test | PPUB
| E | Webstore | |||
IEC 60454-2 ff Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test | MERGED
| F | 2009-06 | |||
IEC 60454-3-1 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: Requirements for plasticized polyvinyl chloride with non-thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-1 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 1: PVC film
tapes with pressure-sensitive adhesive
| PPUB
| B | yes | Webstore | ||
IEC 60454-3-1 Ed. 2.1Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive | PPUB
| B | Webstore | |||
IEC 60454-3-1 am1 Ed. 2.0Amendment 1: Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure-sensitive adhesive | PPUB
| B | yes | Webstore | ||
IEC 60454-3-1 am2 Ed. 2.0Amendment 2: Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: PVC film tapes with pressure sensitive adhesive | DEL
| E | yes | 15C/1292 | ||
DEL 60454-3-2 Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesive | DEL
| E | yes | 15C/1293A | ||
IEC 60454-3-2 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Requirements for polyester film tapes (PETP) with thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-2 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 2: Polyester film tapes with rubber thermosetting or acrylic crosslinked adhesives
| DELPUB
| B | yes | |||
IEC 60454-3-2 Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives | PPUB
| E | yes | Webstore | ||
IEC 60454-3-3 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Requirements for polyester film tapes (PETP) with non-thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-3 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 3: Polyester film tapes with rubber thermoplastic adhesive
| DELPUB
| B | yes | |||
IEC 60454-3-4 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 4: Requirements for cellulosic paper, creped, with thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-4 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive
| DELPUB
| B | 1998-02 | yes | ||
IEC 60454-3-4 Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive | PPUB
| E | 2007-05 | yes | Webstore | |
IEC 60454-3-5 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Requirements for cellulosic paper, with thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-5 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 5: Cellulosic
paper, non-creped, with rubber thermosetting adhesive
| DELPUB
| B | 1998-02 | yes | ||
IEC 60454-3-6 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 6: Requirements for polycarbonate film tapes with non-thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-6 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 6:
Polycarbonate film tapes with acrylic thermoplastic adhesive
| WPUB
| B | 1994-12 | yes | ||
IEC 60454-3-7 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 7: Requirements for polyimide film tapes with thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-7 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 7: Polyimide
film tapes with pressure-sensitive adhesive
| PPUB
| B | yes | Webstore | ||
IEC 60454-3-7 Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive | DEL
| E | yes | 15C/1403 | ||
IEC 60454-3-8 Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes. Part 3: Specifications for individual materials. Sheet 8: Requirements for glass fabric tapes with thermosetting adhesive | DELPUB
| B | ||||
IEC 60454-3-8 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 8: Glass fabric with pressure-sensitive adhesive
| DELPUB
| B | yes | |||
IEC 60454-3-8 Ed. 3.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre | PPUB
| E | 2006-02 | yes | Webstore | |
IEC 60454-3-9 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 9:
Cellulose acetate woven fabric tapes with rubber thermosetting
adhesive
| DELPUB
| B | yes | |||
IEC 60454-3-10 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive | WPUB
| B | 1996-01 | yes | ||
IEC 60454-3-10 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive | DEL
| E | yes | 15C/1405 | ||
IEC 60454-3-11 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 11: Combination tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive
| DELPUB
| B | 1998-01 | yes | ||
IEC 60454-3-11 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive | PPUB
| B | 2007-06 | yes | Webstore | |
IEC 60454-3-11 ff Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive | MERGED
| F | 2012-09 | |||
IEC 60454-3-12 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 12: Polyethylene film tapes with pressure-sensitive adhesive
| DELPUB
| B | yes | |||
IEC 60454-3-12 Ed. 2.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive | PPUB
| E | yes | Webstore | ||
IEC 60454-3-13 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 13:
Requirements for combined cellulose-viscose woven fabric tapes,
one side covered with a thermoplastic material, the other side
with rubber thermosetting adhesive
| DELPUB
| B | yes | |||
IEC 60454-3-14 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 14:
Polytetrafluoroethylene film tapes with pressure-sensitive
adhesive
| PPUB
| B | yes | Webstore | ||
IEC 60454-3-14 Ed. 2.0Pressure sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 14: Polytetrafluoroethylene film tapes with pressure-sensitive adhesive | DEL
| E | yes | 15C/1430 | ||
IEC 60454-3-15 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 15: Polyester
film/polyester non-woven combinations with rubber thermosetting
adhesive
| DELPUB
| B | 2001-08 | yes | ||
IEC 60454-3-16 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive | DELPUB
| B | 2003-06 | yes | ||
IEC 60454-3-17 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part
3: Specifications for individual materials - Sheet 17:
Polyester/epoxy combinations with pressure-sensitive adhesive
| DELPUB
| B | 2001-08 | yes | ||
IEC 60454-3-18 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 18: Polypropylene film tapes with pressure-sensitive adhesive | DELPUB
| B | yes | |||
IEC 60454-3-19 Ed. 1.0Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides | PPUB
| B | yes | Webstore | ||
IEC 60454-2A Ed. 1.0Specifications for pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test - First supplement | DELPUB
| B | ||||
IEC 60455-1 Ed. 1.0Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 1: Definitions and general requirements | DELPUB
| B | ||||
IEC 60455-1 Ed. 2.0Resin based reactive compounds used for electrical insulation -
Part 1: Definitions and general requirements
| PPUB
| B | yes | Webstore | ||
IEC 60455-2 Ed. 1.0Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60455-2 Ed. 2.0Resin based reactive compounds used for electrical insulation -
Part 2: Methods of test
| PPUB
| B | 1999-05 | yes | Webstore | |
IEC 60455-2 Ed. 3.0Resin based reactive compounds used for electrical insulation -Part 2: Methods of test | ADIS
| B | 2014-03 | yes | ||
IEC 60455-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
DEL 60455-2-2 Ed. 2.0Systematic review of IEC 455-2-2 (1984)
| DEL
| B | ||||
IEC 60455-2-2 Ed. 1.0Specification for solventless polymerisable resinous compounds
used for electrical insulation - Part 2: Methods of test - Test
methods for coating powders for electrical purposes
| PPUB
| B | Webstore | |||
IEC 60455-2-2 Ed. 2.0Resin based reactive compounds used for electrical insulation - Part 2: Methods of test: Methods for coating powders for electrical purposes | DEL
| B | ||||
DEL 60455-3-1 Ed. 2.0Systematic review of IEC 455-3-1 (1981)
| DEL
| B | ||||
IEC 60455-3-1 Ed. 1.0Specification for solventless polymerisable resinous compounds
used for electrical insulation. Part 3: Specifications for
individual materials. Sheet 1: Unfilled epoxy resinous compounds
| DELPUB
| B | ||||
IEC 60455-3-1 Ed. 2.0Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds | PPUB
| B | 2003-06 | yes | Webstore | |
IEC 60455-3-2 Ed. 1.0Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 2: Quartz filled epoxy resinous compounds | DELPUB
| B | ||||
IEC 60455-3-2 Ed. 2.0Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds | PPUB
| B | yes | Webstore | ||
IEC 60455-3-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 15C(C.O.)326 | |||
IEC 60455-3-3 Ed. 1.0Specification for solventless polymerisable resinous compounds
used for electrical insulation. Part 3: Specifications for
individual materials. Sheet 3: Unfilled polyurethane compounds
| DELPUB
| B | ||||
IEC 60455-3-3 Ed. 2.0Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds | PPUB
| B | yes | Webstore | ||
IEC 60455-3-4 Ed. 1.0Specification for solventless polymerisable resinous compounds
used for electrical insulation. Part 3: Specifications for
individual materials. Sheet 4: Filled polyurethane compounds
| DELPUB
| B | ||||
IEC 60455-3-4 Ed. 2.0Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds | PPUB
| B | yes | Webstore | ||
IEC 60455-3-5 Ed. 1.0Specification for solventless polymerisable resinous compounds used for electrical insulation. Part 3: Specifications for individual materials. Sheet 5: Unsaturated polyester impregnating resins | DELPUB
| B | ||||
IEC 60455-3-5 Ed. 2.0Resin based reactive compounds used for electrical insulation -
Part 3: Specifications for individual materials - Sheet 5:
Unsaturated polyester based impregnating resins
| DELPUB
| B | yes | |||
IEC 60455-3-5 Ed. 3.0Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins | PPUB
| B | 2005-12 | yes | Webstore | |
IEC 60455-3-8 Ed. 1.0Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories | CDIS
| B | 2013-05 | yes | ||
IEC 60455-3-11 Ed. 1.0Specification for solventless polymerisable resinous compounds
used for electrical insulation. Part 3: Specifications for
individual materials. Sheet 11: Epoxy resin-based coating powders
| PPUB
| B | Webstore | |||
IEC 60455-3-11 Ed. 2.0Systematic review of IEc 455-3-11 (1988)
| DEL
| B | ||||
IEC 60455-1A Ed. 1.0Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 1: Definitions and general requirements - First supplement: Basis for classification of polymerisable resinous compounds | DELPUB
| B | ||||
IEC 60455-1A Ed. 2.0Systematic review of IEC 60455-1A (1980) | DEL
| B | ||||
IEC 60464-1 Ed. 1.0Specification for insulating varnishes containing solvent. Part 1: Definitions and general requirements | DELPUB
| B | ||||
IEC 60464-1 Ed. 2.0Varnishes used for electrical insulation - Part 1: Definitions
and general requirements
| PPUB
| B | yes | Webstore | ||
IEC 60464-1 am1 Ed. 2.0Amendment 1: Varnishes used for electrical insulation - Part 1: Definitions and general requirements | PPUB
| E | yes | Webstore | ||
IEC 60464-2 Ed. 1.0Specification for insulating varnishes containing solvent. Part 2: Test methods | DELPUB
| B | ||||
IEC 60464-2 Ed. 2.0Varnishes used for electrical insulation - Part 2: Methods of
test
| PPUB
| B | yes | Webstore | ||
IEC 60464-2 am1 Ed. 2.0Amendment 1: Varnishes used for electrical insulation - Part 2: Methods of test | PPUB
| E | yes | Webstore | ||
IEC 60464-3-1 Ed. 1.0Specification for insulating varnishes containing solvent. Part 3: Specifications for individual materials. Sheet 1: Requirements for cold curing finishing varnishes | DELPUB
| B | ||||
IEC 60464-3-1 Ed. 2.0Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
| PPUB
| B | yes | Webstore | ||
IEC 60464-3-1 am1 Ed. 2.0Amendment 1: Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes | PPUB
| E | yes | Webstore | ||
IEC 60464-3-2 Ed. 1.0Specification for insulating varnishes containing solvent. Part 3: Specifications for individual materials. Part 3: Specifications for individual materials - Sheet 2: Requirements for hot curing impregnating varnishes | DELPUB
| B | ||||
IEC 60464-3-2 Ed. 2.0Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes
| PPUB
| B | yes | Webstore | ||
IEC 60464-3-2 am1 Ed. 2.0Amendment 1: Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Hot curing impregnating varnishes | PPUB
| E | 2006-06 | yes | Webstore | |
IEC 60554-1 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements | PPUB
| B | Webstore | |||
IEC 60554-1 Ed. 2.0Systematic review of IEC 60554-1 (1977) | DEL
| B | ||||
IEC 60554-1 am1 Ed. 1.0Amendment 1: Specification for cellulosic papers for electrical purposes. Part 1: Definitions and general requirements | PPUB
| B | Webstore | |||
IEC 60554-1 am2 Ed. 1.0Amendment 2 to IEC 60554-1 | DEL
| E | no | 15C/1254 | ||
IEC 60554-2 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60554-2 Ed. 2.0Cellulosic papers for electrical purposes - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 60554-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60554-2 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60554-2 am3 Ed. 1.0Amendment No. 3 | DELPUB
| B | ||||
IEC 60554-2 am4 f2 Ed. 1.0Amendment to IEC 554-2 (Second edition), Specification for
cellulosic paper for electrical purposes - Part 2: Methods of
test - Clause 25.4: Method 4
| MERGED
| E | ||||
IEC 60554-3-1 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: General purpose electrical paper | PPUB
| B | Webstore | |||
IEC 60554-3-1 Ed. 2.0Systematic review of IEC 60554-3-1 (1979) | DEL
| B | ||||
IEC 60554-3-1 am1 Ed. 1.0Maintenance Cycle Report on IEC 60554-3-1, Ed.1 | DEL
| E | no | 15C/1255A | ||
DEL 60554-3-2 Ed. 2.0Systematic review of IEC 60554-3-2 (1983) | DEL
| B | ||||
IEC 60554-3-2 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 2: Capacitor paper | PPUB
| B | Webstore | |||
IEC 60554-3-2 Ed. 2.0Cellulosic papers for electrical purposes - Part 3 - Sheet 2: Capacitor paper | DEL
| E | yes | 15C/1298 | ||
DEL 60554-3-3 Ed. 2.0Systematic review of IEC 60554-3-3 (1980) | DEL
| B | ||||
IEC 60554-3-3 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Crêpe paper | PPUB
| B | Webstore | |||
IEC 60554-3-3 Ed. 2.0Cellulosic papers for electrical purposes - Part 3 - Sheet 3: Crêpe paper | DEL
| E | yes | 15C/1299 | ||
DEL 60554-3-4 Ed. 2.0Systematic review of IEC 60554-3-4 (1979) | DEL
| B | ||||
IEC 60554-3-4 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 4: Electrolytic capacitor paper | PPUB
| B | Webstore | |||
IEC 60554-3-4 Ed. 2.0Cellulosic papers for electrical purposes - Part 3 - Sheet 4: Electrolytic capacitor paper | DEL
| E | yes | 15C/1300 | ||
IEC 60554-3-5 Ed. 1.0Specification for cellulosic papers for electrical purposes. Part 3: Specifications for individual materials. Sheet 5: Special papers | PPUB
| B | Webstore | |||
IEC 60554-3-5 Ed. 2.0Systematic review of IEC 60554-3-5 (1984) | DEL
| B | ||||
IEC 60554-3-5 am1 Ed. 1.0Amendment 1 to IEC 60554-3-5: Specification for cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Special papers | DEL
| E | no | 15C/1301 | ||
MERGED
| E | |||||
DEL 60589 f1 Ed. 2.0Systematic review of IEC 589 (1977)
| DEL
| B | ||||
IEC 60626-1 Ed. 1.0Specification for combined flexible materials for electrical insulation. Part 1: Definitions and general requirements | DELPUB
| B | ||||
IEC 60626-1 Ed. 2.0Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements | DELPUB
| B | 1995-05 | yes | ||
IEC 60626-1 Ed. 3.0Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements | PPUB
| B | 2009-09 | yes | Webstore | |
IEC 60626-1 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 1996-08 | yes | ||
IEC 60626-2 Ed. 1.0Specification for combined flexible materials for electrical insulation. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60626-2 Ed. 2.0Combined flexible materials for electrical insulation - Part 2: Methods of test | DELPUB
| B | 1995-09 | yes | ||
IEC 60626-2 Ed. 3.0Combined flexible materials for electrical insulation - Part 2: Methods of test | PPUB
| B | 2009-09 | yes | Webstore | |
DEL 60626-3 Ed. 2.1Combined flexible materials for electrical insultation - Part 3: Specification for individual materials | DEL
| B | ||||
IEC 60626-3 Ed. 1.0Specification for combined flexible materials for electrical
insulation. Part 3: Specifications for individual materials
| DELPUB
| B | ||||
IEC 60626-3 Ed. 2.0Combined flexible materials for electrical insulation - Part 3:
Specifications for individual materials
| DELPUB
| B | 1996-10 | yes | ||
IEC 60626-3 Ed. 2.1Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials | DELPUB
| B | ||||
IEC 60626-3 Ed. 3.0Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60626-3 fC1 Ed. 2.0Corrigendum 1 | DELPUB
| B | ||||
IEC 60626-3 am1 Ed. 2.0Amendment 1
| DELPUB
| B | 1999-06 | yes | ||
IEC 60626-3 am1 Ed. 3.0Amendment 1 - Combined flexible materials for electrical insulation - Part 3: Specifications for individual materials | PPUB
| B | 2012-06 | yes | Webstore | |
IEC 60641-1 Ed. 1.0Specification for pressboard and presspaper for electrical purposes. Part 1: Definitions and general requirements | DELPUB
| B | ||||
IEC 60641-1 Ed. 2.0Specification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements | PPUB
| B | 2007-12 | yes | Webstore | |
IEC 60641-1 ff Ed. 2.0Pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements | MERGED
| F | ||||
IEC 60641-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 1993-03 | 15C(C.O.)327 | ||
IEC 60641-2 Ed. 1.0Specification for pressboard and presspaper for electrical purposes. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60641-2 Ed. 2.0Pressboard and presspaper for electrical purposes - Part 2: Methods of tests
| PPUB
| B | 2003-03 | yes | Webstore | |
IEC 60641-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 15C(C.O.)328 | |||
IEC 60641-3-1 Ed. 1.0Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1 | DELPUB
| B | 1991-10 | 15C(C.O.)284 | ||
IEC 60641-3-1 Ed. 2.0Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 | PPUB
| B | 2008-07 | yes | Webstore | |
IEC 60641-3-1 f1 Ed. 2.0Systematic review of IEC 60641-3-1 (1992) | DEL
| B | ||||
IEC 60641-3-2 Ed. 1.0Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1 | DELPUB
| B | 1991-11 | 15C(C.O.)285 | ||
IEC 60641-3-2 Ed. 2.0Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 | PPUB
| B | 2007-12 | yes | Webstore | |
IEC 60641-3-2 f1 Ed. 2.0Systematic review of IEC 60641-3-2 (1992) | DEL
| B | ||||
IEC 60641-3-2 ff Ed. 2.0Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 | MERGED
| F | ||||
IEC 60648 Ed. 1.0Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation | PPUB
| B | Webstore | |||
IEC 60648 Ed. 2.0Systematic review of IEC 60648 (1979) | DEL
| B | ||||
IEC 60667-1 Ed. 1.0Specification for vulcanized fibre for electrical purposes. Part 1: Definitions and general requirements | PPUB
| B | Webstore | |||
IEC 60667-1 Ed. 2.0Systematic review of IEC 60667-1 (1980) | DEL
| B | ||||
IEC 60667-1 am1 Ed. 1.0Amendment 1 to IEC 60667-1: Specification for vulcanized fibre for electrical purposes. Part 1: Definitions and general requirements | DEL
| E | no | 15C/1259A | ||
IEC 60667-2 Ed. 1.0Specification for vulcanized fibre for electrical purposes. Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 60667-2 Ed. 2.0Systematic review of IEC 60667-2 (1982) | DEL
| B | ||||
IEC 60667-2 am1 Ed. 1.0Amendment 1: Specification for vulcanized fibre for electrical purposes. Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 60667-3-1 Ed. 1.0Specification for vulcanized fibre for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: Flat sheets | PPUB
| B | Webstore | |||
IEC 60667-3-1 Ed. 2.0Systematic review of IEC 60667-3-1 (1986) | DEL
| B | ||||
IEC 60672-1 Ed. 1.0Specification for ceramic and glass insulating materials. Part 1: Definitions and classification | DELPUB
| B | ||||
IEC 60672-1 Ed. 2.0Ceramic and glass insulating materials - Part 1: Definitions and classification | PPUB
| B | yes | Webstore | ||
IEC 60672-2 Ed. 1.0Specification for ceramic and glass insulating materials. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60672-2 Ed. 2.0Ceramic and glass insulating materials - Part 2: Methods of test
| PPUB
| B | yes | Webstore | ||
IEC 60672-3 Ed. 1.0Specification for ceramic and glass insulating materials. Part 3: Individual materials | DELPUB
| B | ||||
IEC 60672-3 Ed. 2.0Ceramic and glass-insulating materials - Part 3: Specifications
for individual materials
| PPUB
| B | yes | Webstore | ||
IEC 60674-1 Ed. 1.0Specification for plastic films for electrical purposes. Part 1:
Definitions and general requirements
| PPUB
| B | Webstore | |||
IEC 60674-1 Ed. 2.0Systematic review of IEC 674-1 (1980)
| DEL
| B | ||||
IEC 60674-2 Ed. 1.0Specification for plastic films for electrical purposes. Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 60674-2 am1 Ed. 1.0Amendment 1: Specification for plastic films for electrical purposes. Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 60674-3-1 Ed. 1.0Plastic films for electrical purposes - Part 3: Specifications
for individual materials - Sheet 1: Biaxially oriented
polypropylene (PP) film for capacitors
| PPUB
| B | yes | Webstore | ||
IEC 60674-3-1 Ed. 1.1Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) films for capacitors | PPUB
| B | Webstore | |||
IEC 60674-3-1 am1 Ed. 1.0Amendment 1 - Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors | PPUB
| B | 2011-09 | yes | Webstore | |
IEC 60674-3-2 Ed. 1.0Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation | PPUB
| B | Webstore | |||
IEC 60674-3-2 Ed. 2.0Systematic review of IEC 60674-3-2 (1992) | DEL
| B | ||||
IEC 60674-3-3 Ed. 1.0Specification for plastic films for electrical purposes - Part
3: Specifications for individual materials - Sheet 3:
Requirements for polycarbonate (PC) films used for electrical
insulation
| PPUB
| B | Webstore | |||
IEC 60674-3-3 Ed. 2.0Systematic review of IEC 60674-3-3 (1992) | DEL
| B | ||||
IEC 60674-3-4 Ed. 1.0Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation | PPUB
| B | Webstore | |||
IEC 60674-3-7 Ed. 1.0Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation | PPUB
| B | Webstore | |||
IEC 60674-3-7 Ed. 2.0Systematic review of IEC 60674-3-7 | DEL
| B | ||||
IEC 60674-3-8 Ed. 1.0Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
| PPUB
| B | 2011-07 | yes | Webstore | |
DEL 60684-1 Ed. 2.0Systematic review of IEC 684-1 (1980)
| DEL
| B | ||||
IEC 60684-1 Ed. 1.0Specification for flexible insulating sleeving. Part 1:
Definitions and general requirements
| DELPUB
| B | ||||
IEC 60684-1 Ed. 2.0Flexible insulating sleeving - Part 1: Definitions and general requirements | PPUB
| B | yes | Webstore | ||
IEC 60684-2 Ed. 1.0Specification for flexible insulating sleeving. Part 2: Methods of test | DELPUB
| B | ||||
IEC 60684-2 Ed. 2.0Flexible insulating sleeving - Part 2: Methods of test
| DELPUB
| B | 1997-06 | yes | ||
IEC 60684-2 Ed. 2.1Flexible insulating sleeving - Part 2: Methods of test | DELPUB
| B | ||||
IEC 60684-2 Ed. 3.0Flexible insulating sleeving - Part 2: Methods of test | PPUB
| B | 2011-08 | yes | Webstore | |
IEC 60684-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60684-2 am1 Ed. 2.0Amendment 1 | DELPUB
| B | 2003-06 | yes | ||
IEC 60684-2 am2 Ed. 2.0Amendment 2 | DELPUB
| E | 2005-11 | yes | ||
IEC 60684-3-100 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 100 to 105: Extruded PVC sleeving | PPUB
| B | yes | Webstore | ||
IEC/TS 60684-3-100 Ed. 1.0Specification for flexible insulating sleeving. Part 3: Specification requirements for individual types of sleeving. Sheets 100 to 105: Extruded PVC sleeving | DELPUB
| B | ||||
IEC 60684-3-116 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 116 to 118: Extruded polychloroprene, general purpose | DELPUB
| B | ||||
IEC 60684-3-116 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene - General purpose | DELPUB
| B | 2003-06 | yes | ||
IEC 60684-3-116 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 116 and 117: Extruded polychloroprene, general purpose | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60684-3-121 Ed. 1.0Specification for flexible insulating sleeving. Part 3: Specification requirements for individual types of sleeving. Sheets 121 and 122: Extruded silicone sleeving | DELPUB
| B | ||||
IEC 60684-3-121 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 to 124: Extruded silicone sleeving
| PPUB
| B | yes | Webstore | ||
IEC 60684-3-123 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 123 and 124: Extruded silicone sleeving, general purpose | DELPUB
| B | 15C(C.O.)286 | |||
IEC 60684-3-136 Ed. 1.0Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 136: Extruded fluorosilicone sleeving - General purpose
| PPUB
| B | yes | Webstore | ||
IEC 60684-3-136 fC1 Ed. 1.0Corrigendum 1
| PPUB
| B | Webstore | |||
IEC 60684-3-145 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 145 to 147: Extruded PTFE sleeving
| PPUB
| B | yes | Webstore | ||
IEC 60684-3-151 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for
individual types of sleeving - Sheet 151: Extruded PVC/nitrile
rubber - General purpose
| PPUB
| B | yes | Webstore | ||
IEC 60684-3-165 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving | PPUB
| B | yes | Webstore | ||
IEC 60684-3-201 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 201: Heat shrinkable sleeving, general purpose, flexible, cross-linked PVC, shrink ratio 2:1 | WPUB
| B | ||||
IEC 60684-3-201 Ed. 2.0Systematic review of IEC 60684-3-201 (1991) | DEL
| B | ||||
IEC 60684-3-205 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1
| PPUB
| B | 2011-07 | yes | Webstore | |
IEC 60684-3-209 Ed. 1.0Specification for flexible insulating sleeving. Part 3: Specification requirements for individual types of sleeving. Sheet 209: Heat shrinkable sleeving, general purpose, flame retarded polyolefin shrink ratio 2:1 | DELPUB
| B | ||||
IEC 60684-3-209 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable
polyolefin sleeving, general purpose, flame retarded, shrink
ratio 2:1
| DELPUB
| B | 2003-04 | yes | ||
IEC 60684-3-209 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60684-3-211 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, general purpose, semi-rigid polyolefin, shrink ratio 2:1 | DELPUB
| B | 15C(C.O.)275 | |||
IEC 60684-3-211 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 | DELPUB
| B | yes | |||
IEC 60684-3-211 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 | PPUB
| B | 2007-03 | yes | Webstore | |
IEC 60684-3-211 ff Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 211: Heat-shrinkable sleeving, semi-rigid polyolefin, shrink ratio 2:1 | MERGED
| F | 2009-05 | |||
IEC 60684-3-212 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for
individual types of sleeving - Sheet 212: Heat-shrinkable,
polyolefin sleeving, flame retarded, shrink ratio 2:1
| DELPUB
| B | yes | |||
IEC 60684-3-212 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings
| PPUB
| E | yes | Webstore | ||
IEC 60684-3-213 Ed. 1.0Flexible insulating sleeving - Part 3: Specification for
individual types of sleeving - Sheet 213: Heat-shrinkable
polyolefin sleeving, not flame retarded, shrink ratio 2:1
| WPUB
| B | yes | |||
IEC 60684-3-214 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 - Thick and medium wall | DELPUB
| B | yes | |||
IEC 60684-3-214 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, shrink ratio 3:1 - Thick and medium wall
| PPUB
| E | 2004-07 | yes | Webstore | |
IEC 60684-3-214 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall | ADIS
| B | 2013-05 | yes | ||
IEC 60684-3-215 Ed. 1.0Specification for flexible insulating materials - Part 3: Specification requirements for individual types of sleeving - Sheet 215: Heat-shrinkable polyolefin sleeving, shrink ratio 3:1, not flame retarded, thick wall | MERGED
| E | 15C/495 | |||
IEC 60684-3-216 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving
| PPUB
| B | yes | Webstore | ||
IEC 60684-3-216 Ed. 1.1Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving | PPUB
| B | Webstore | |||
IEC 60684-3-216 fC1 Ed. 1.0Corrigendum 1: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame - retarded, limited-fire-hazard sleeving | PPUB
| B | Webstore | |||
IEC 60684-3-216 am1 Ed. 1.0Amendment 1: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame - retarded, limited-fire-hazard sleeving | PPUB
| B | yes | Webstore | ||
IEC 60684-3-216 am2 Ed. 1.0Amendment 2: Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving | APUB
| B | 2013-07 | yes | ||
IEC 60684-3-217 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded, shrink ratio 3:1
| WPUB
| B | yes | |||
IEC 60684-3-218 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 218: Heat-shrinkable polyolefin sleeving, not flame retarded, shrink ratio 3:1
| WPUB
| B | yes | |||
IEC 60684-3-228 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for
individual types of sleeving - Sheet 228: Heat-shrinkable
semi-rigid polyvinylidene fluoride sleeving, flame retarded,
fluid resistant, shrink ratio 2:1
| DELPUB
| B | yes | |||
IEC 60684-3-228 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | PPUB
| B | 2004-05 | yes | Webstore | |
IEC 60684-3-229 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | PPUB
| B | yes | Webstore | ||
IEC 60684-3-233 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for
individual types of sleeving - Sheet 233: Heat-shrinkable
fluoroelastomer sleeving, flame retarded, fluid resistant,
shrink ratio 2:1
| DELPUB
| B | yes | |||
IEC 60684-3-233 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
| PPUB
| E | yes | Webstore | ||
IEC 60684-3-240 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving | DELPUB
| B | ||||
IEC 60684-3-240 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 240 to 243: Heat-shrinkable PTFE sleeving | PPUB
| B | yes | Webstore | ||
DEL 60684-3-246 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall not flame retarded | DEL
| E | ||||
IEC 60684-3-246 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheet 246: Heat-shrinkable sleeving, dual-wall, not flame-retarded, polyolefin | DELPUB
| B | 15C(C.O.)274 | |||
IEC 60684-3-246 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, not flame retarded
| DELPUB
| B | yes | |||
IEC 60684-3-246 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded
| PPUB
| B | 2007-03 | yes | Webstore | |
IEC 60684-3-246 ff Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 246: Heat-shrinkable polyolefin sleeving, dual wall, non-flame retarded | MERGED
| F | 2009-05 | |||
IEC 60684-3-247 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall
| PPUB
| B | 2011-07 | yes | Webstore | |
IEC 60684-3-248 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1
| PPUB
| B | 2007-03 | yes | Webstore | |
IEC 60684-3-248 ff Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 | MERGED
| F | 2009-05 | |||
IEC 60684-3-271 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for
individual types of sleeving - Sheet 271: Heat-shrinkable
elastomer sleeving, flame retarded, fluid resistant, shrink
ratio 2:1
| DELPUB
| B | yes | |||
IEC 60684-3-271 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | DELPUB
| B | 2004-06 | yes | ||
IEC 60684-3-271 Ed. 3.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1 | PPUB
| B | 2011-07 | yes | Webstore | |
IEC 60684-3-272 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for indiviual types of sleeving - Sheet 272: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1, thin wall
| DELPUB
| B | yes | |||
IEC 60684-3-280 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60684-3-280 am1 Ed. 1.0Amendment 1: Flexible insulating sleeving-Specifications for individual types of Sleeving-Sheet 280 : Heat-shrinkable, polyolefin sleeving, anti-tracking | APUB
| B | 2013-07 | yes | ||
IEC 60684-3-281 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60684-3-282 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 60684-3-283 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation | PPUB
| B | 2010-12 | yes | Webstore | |
IEC 60684-3-283 am1 Ed. 1.0Amendment 1: Flexible insulating sleeving-Specifications for individual types of Sleeving-Sheet 283 : Heat-shrinkable, polyolefin sleeving for bus bar insulation | APUB
| B | 2013-07 | yes | ||
IEC 60684-3-284 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings, for oil barrier applications
| CCDV
| B | 2014-03 | yes | ||
IEC 60684-3-285 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation | CCDV
| B | 2014-03 | yes | ||
DEL 60684-3-300 Ed. 2.0Systematic review of IEC 684-3-300 (1987)
| DEL
| B | ||||
IEC 60684-3-300 Ed. 1.0Specification for flexible insulating sleeving. Part 3:
Specification requirements for individual types of sleeving.
Sheet 300: Glass textile fibre sleeving, braided, uncoated
| DELPUB
| B | ||||
IEC 60684-3-300 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 300: Glass textile fibre sleeving, braided, uncoated | PPUB
| B | yes | Webstore | ||
DEL 60684-3-320 Ed. 2.0Systematic review of IEC 684-3-320 (1987)
| DEL
| B | ||||
IEC 60684-3-320 Ed. 1.0Specification for flexible insulating sleeving. Part 3:
Specification requirements for individual types of sleeving.
Sheet 320: Polyethylene terephthalate textile, lightly
impregnated
| DELPUB
| B | ||||
IEC 60684-3-320 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 320: Polyethylene terephthalate textile sleeving, lightly impregnated | PPUB
| B | yes | Webstore | ||
DEL 60684-3-340 Ed. 2.0Systematic review of IEC 60684-3-340 (1992) | DEL
| B | ||||
IEC 60684-3-340 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephtalate textile sleeving | DELPUB
| B | ||||
IEC 60684-3-340 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving | PPUB
| B | yes | Webstore | ||
DEL 60684-3-343 Ed. 2.0Systematic review of IEC 60684-3-343 (1992) | DEL
| B | ||||
IEC 60684-3-343 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated | DELPUB
| B | ||||
IEC 60684-3-343 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated | PPUB
| B | yes | Webstore | ||
IEC 60684-3-400 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating | DELPUB
| B | ||||
IEC 60684-3-400 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating | PPUB
| B | yes | Webstore | ||
IEC 60684-3-403 Ed. 2.0Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 403 to 405: Glass textile sleeving with acrylic based coating | PPUB
| B | yes | Webstore | ||
IEC/TS 60684-3-403 Ed. 1.0Specification for flexible insulating sleeving. Part 3:
Specification requirements for individual types of sleeving.
Sheets 403 to 405: Glass textile sleeving with acrylic based
coating
| DELPUB
| B | ||||
IEC/TS 60684-3-403 Ed. 2.0Systematic review of IEC 684-3-403 (1988)
| DEL
| B | ||||
IEC 60684-3-406 Ed. 2.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating | PPUB
| B | yes | Webstore | ||
IEC/TS 60684-3-406 Ed. 1.0Specification for flexible insulating sleeving. Part 3:
Specification requirements for individual types of sleeving.
Sheets 406 to 408: Glass textile sleeving with PVC based coating
| DELPUB
| B | ||||
IEC/TS 60684-3-406 Ed. 2.0Systematic review of IEC 684-3-406 (1988)
| DEL
| B | ||||
IEC 60684-3-409 Ed. 1.0Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating
| PPUB
| B | yes | Webstore | ||
DEL 60684-3-420 Ed. 2.0Systematic review of IEC 60684-3-420 (1991) | DEL
| B | ||||
IEC 60684-3-420 Ed. 1.0Specification for flexible insulating sleeving - Part 3: Specification requirements for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile with acrylic based coating | DELPUB
| B | ||||
IEC 60684-3-420 Ed. 2.0Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating | PPUB
| B | yes | Webstore | ||
IEC/TS 60695-11-21 Ed. 1.0Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials | PPUB
| B | 2007-01 | no | Webstore | |
IEC 60763-1 Ed. 1.0Specification for laminated pressboard. Part 1: Definitions, classification and general requirements | DELPUB
| B | ||||
IEC 60763-1 Ed. 2.0Laminated pressboard for electrical purposes - Part 1: Definitions, classification and general requirements | PPUB
| B | 2010-08 | yes | Webstore | |
DEL 60763-2 Ed. 2.0Systematic review of IEC 60763-2 (1991) | DEL
| B | ||||
IEC 60763-2 Ed. 1.0Specification for laminated pressboard - Part 2: Methods of test | DELPUB
| B | ||||
IEC 60763-2 Ed. 2.0Specification for laminated pressboard - Part 2: Methods of test | PPUB
| B | 2007-03 | yes | Webstore | |
IEC 60763-2 ff Ed. 2.0Specification for laminated pressboard - Part 2: Methods of test | MERGED
| F | 2009-05 | |||
IEC 60763-3-1 Ed. 1.0Specification for laminated pressboard - Part 3: Specifications for individual materials - Sheet 1: Specifications for laminated precompressed board, Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2 | DELPUB
| B | 1991-02 | 15C(C.O.)271 | ||
IEC 60763-3-1 Ed. 2.0Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB3.1A.1 and LB3.1A.2 | PPUB
| B | 2010-08 | yes | Webstore | |
IEC 60795 Ed. 1.0Test method for evaluating thermal endurance of flexible sheet
materials using the wrapped tube method
| WPUB
| B | ||||
IEC 60795 Ed. 2.0Systematic review of IEC 795 (1984)
| DEL
| B | ||||
IEC 60819-1 Ed. 1.0Specification for non-cellulosic papers for electrical purposes. Part 1: Definitions and general requirements | DELPUB
| B | ||||
IEC 60819-1 Ed. 2.0Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements | DELPUB
| B | 1995-01 | yes | ||
IEC 60819-1 Ed. 3.0Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements | PPUB
| B | 2009-10 | yes | Webstore | |
IEC 60819-1 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 1996-08 | yes | ||
IEC 60819-2 Ed. 1.0Non-cellulosic papers for electrical purposes - Part 2: Methods of test
| PPUB
| B | yes | Webstore | ||
IEC 60819-3-1 Ed. 1.0Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Filled glass paper | PPUB
| B | yes | Webstore | ||
IEC 60819-3-2 Ed. 1.0Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Hybrid inorganic-organic paper | PPUB
| B | yes | Webstore | ||
DEL 60819-3-3 Ed. 2.0Systematic review of IEC 60819-3-3 (1991) | DEL
| B | ||||
IEC 60819-3-3 Ed. 1.0Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers | DELPUB
| B | ||||
IEC 60819-3-3 Ed. 2.0Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers | DELPUB
| B | 2006-06 | yes | ||
IEC 60819-3-3 Ed. 3.0Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers
| PPUB
| B | 2011-09 | yes | Webstore | |
IEC 60819-3-3 fC1 Ed. 2.0Corrigendum 1 | DELPUB
| B | ||||
IEC 60819-3-4 Ed. 1.0Non-cellulosic papers for electrical purposes - Part 3:
Specifications for individual materials - Sheet 4: Aramid fibre
paper containing not more than 50 % of mica particles
| PPUB
| B | yes | Webstore | ||
IEC 60819-3-4 Ed. 2.0Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles | APUB
| B | 2013-08 | yes | ||
DEL 60893-1 Ed. 2.0Systematic review of IEC 893-1 (1987)
| DEL
| B | ||||
IEC 60893-1 Ed. 1.0Specification for industrial rigid laminated sheets based on
thermosetting resins for electrical purposes. Part 1:
Definitions, designations and general requirements
| DELPUB
| B | ||||
IEC 60893-1 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | PPUB
| B | yes | Webstore | ||
IEC 60893-1 am1 Ed. 1.0Amendment to IEC 893-1 - Deletion of materials dangerous to health | DEL
| E | 15C(DE)323 | |||
IEC 60893-2 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test | DELPUB
| B | ||||
IEC 60893-2 Ed. 2.0Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 60893-2 am1 Ed. 1.0Amendment to Sub-clauses 5.7.2, 6.1 and 6.1.3 of IEC 893-2 | DEL
| E | 15C(DE)324 | |||
IEC 60893-3-1 Ed. 1.0Specification for industrial rigid laminated sheets based on
thermosetting resins for electrical purposes - Part 3:
Specifications for individual materials - Sheet 1: Types of
industrial rigid laminated sheets
| DELPUB
| B | ||||
IEC 60893-3-1 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets | DELPUB
| B | 2003-11 | yes | ||
IEC 60893-3-1 Ed. 3.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Types of industrial rigid laminated sheets | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 60893-3-1 am1 Ed. 1.0Amendment No. 1
| DELPUB
| B | yes | |||
IEC 60893-3-2 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxide resins | DELPUB
| B | ||||
IEC 60893-3-2 Ed. 1.1Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for rigid laminated sheets based on epoxide resins | DELPUB
| B | ||||
IEC 60893-3-2 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins
| PPUB
| B | yes | Webstore | ||
IEC 60893-3-2 Ed. 2.1Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins | PPUB
| B | Webstore | |||
IEC 60893-3-2 am1 Ed. 2.0Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins | PPUB
| B | 2011-06 | yes | Webstore | |
IEC 60893-3-2 am1 f1 Ed. 2.0Amendment 1 | DELPUB
| B | yes | |||
IEC 60893-3-2 am1 f2 Ed. 1.0Amendment No. 1 to IEC 893-3-2 - Tables 5 and 6 | DELPUB
| E | 15C(DE)325 | |||
IEC 60893-3-2 am2 Ed. 2.0Amendment 2 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins | MERGED
| B | 2011-10 | yes | ||
IEC 60893-3-3 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for rigid laminated sheets based on melamine resins | DELPUB
| B | ||||
IEC 60893-3-3 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins | PPUB
| B | yes | Webstore | ||
IEC 60893-3-3 Ed. 2.1Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins | PPUB
| B | Webstore | |||
IEC 60893-3-3 am1 Ed. 1.0Amendment No. 1 to IEC 893-3-3 - Tables 5 and 6 | DEL
| E | 15C(DE)325 | |||
IEC 60893-3-3 am1 Ed. 2.0Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins | PPUB
| B | 2011-11 | yes | Webstore | |
IEC 60893-3-4 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Requirements for rigid laminated sheets based on phenolic resins | DELPUB
| B | ||||
IEC 60893-3-4 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins | PPUB
| B | yes | Webstore | ||
IEC 60893-3-4 am1 Ed. 1.0Amendment No. 1 to IEC 893-3-4 - Tables 5 and 6 | DEL
| E | 15C(DE)325 | |||
IEC 60893-3-4 am1 Ed. 2.0Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins | PPUB
| B | 2012-10 | yes | Webstore | |
IEC 60893-3-5 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Requirements for rigid laminated sheets based on polyester resins | DELPUB
| B | ||||
IEC 60893-3-5 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins | PPUB
| B | yes | Webstore | ||
IEC 60893-3-5 Ed. 2.1Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins | PPUB
| B | Webstore | |||
IEC 60893-3-5 am1 Ed. 1.0Amendment No. 1 to IEC 893-3-5 - Tables 5 and 6 | DEL
| E | 15C(DE)325 | |||
IEC 60893-3-5 am1 Ed. 2.0Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins | PPUB
| B | 2009-09 | yes | Webstore | |
IEC 60893-3-6 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Requirements for rigid laminated sheets based on silicone resins | DELPUB
| B | ||||
IEC 60893-3-6 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins | PPUB
| B | yes | Webstore | ||
IEC 60893-3-6 Ed. 2.1Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins | PPUB
| B | Webstore | |||
IEC 60893-3-6 am1 Ed. 1.0Amendment No. 1 to IEC 893-3-6 - Tables 5 and 6 | DEL
| E | 15C(DE)325 | |||
IEC 60893-3-6 am1 Ed. 2.0Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins | PPUB
| B | 2009-09 | yes | Webstore | |
IEC 60893-3-7 Ed. 1.0Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for rigid laminated sheets based on polyimide resins | DELPUB
| B | yes | |||
IEC 60893-3-7 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins | PPUB
| B | yes | Webstore | ||
IEC 60893-3-7 Ed. 2.1Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins | PPUB
| B | Webstore | |||
IEC 60893-3-7 am1 Ed. 2.0Amendment 1 - Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins | PPUB
| B | 2009-09 | yes | Webstore | |
IEC/TR 60893-4 Ed. 1.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values | PPUB
| B | no | Webstore | ||
IEC/TR 60893-4 Ed. 2.0Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values | CDTR
| B | 2014-01 | no | ||
IEC 61033 Ed. 1.0Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate | PPUB
| B | Webstore | |||
DEL 61033 am1 Ed. 1.0Amendment No. 1 to IEC 1033 - Test methods for the determination of bond-strength of impregnating agents to an enameled wire substrate | DEL
| B | ||||
IEC 61033 am1 Ed. 1.0Amendment 1: Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate | PPUB
| B | 2006-06 | no | Webstore | |
IEC 61061-1 Ed. 1.0Specification for non-impregnated, densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements | DELPUB
| B | ||||
IEC 61061-1 Ed. 2.0Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements
| DELPUB
| B | yes | |||
IEC 61061-1 Ed. 3.0Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements | PPUB
| B | 2006-11 | yes | Webstore | |
IEC 61061-1 ff Ed. 3.0Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements | MERGED
| F | 2009-05 | |||
IEC 61061-1 am1 f1 Ed. 1.0Amendments to IEC 1061-1: Non-impregnated, densified,laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements | MERGED
| B | 15C(Sec.)351 | |||
IEC 61061-2 Ed. 1.0Non-impregnated densified laminated wood for electrical purposes - Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 61061-2 Ed. 1.1Specification for non-impregnated, densified laminated wood for electrical purposes - Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 61061-2 am1 Ed. 1.0Amendment 1: Non-impregnated densified laminated wood for electrical purposes - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 61061-3-1 Ed. 1.0Non-impregnated densified laminated wood for electrical purposes
- Part 3: Specifications for individual materials - Sheet 1: Sheets produced from beech veneer
| PPUB
| B | yes | Webstore | ||
IEC 61061-3-1 Ed. 2.0Non-impregnated densified laminated wood for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Sheets produced from beech veneer | DEL
| E | yes | |||
IEC 61061-3-2 Ed. 1.0Non-impregnated densified laminated wood for electrical
purposes - Part 3: Specifications for individual materials -
Sheet 2: Rings produced from beech veneer
| PPUB
| B | yes | Webstore | ||
IEC 61067-1 Ed. 1.0Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements | PPUB
| B | Webstore | |||
IEC 61067-1 Ed. 2.0Systematic review of IEC 61067-1 (1991) | DEL
| B | ||||
IEC 61067-2 Ed. 1.0Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 61067-2 Ed. 2.0Systematic review of IEC 61067-2 (1992) | DEL
| B | ||||
IEC 61067-3-1 Ed. 1.0Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes | PPUB
| B | yes | Webstore | ||
IEC 61068-1 Ed. 1.0Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements | PPUB
| B | Webstore | |||
IEC 61068-1 Ed. 2.0Systematic review of IEC 61068-1 (1991) | DEL
| B | ||||
IEC 61068-2 Ed. 1.0Specification for polyester fibre woven tapes - Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 61068-2 Ed. 2.0Systematic review of IEC 61068-2 (1991) | DEL
| B | ||||
IEC 61068-3-1 Ed. 1.0Specification for polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms | DELPUB
| B | 15C(C.O.)287 | |||
IEC 61068-3-1 Ed. 2.0Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms | PPUB
| B | yes | Webstore | ||
IEC 61068-3-1 fC1 Ed. 2.0Corrigendum 1 | PPUB
| E | Webstore | |||
DEL 61086-1 Ed. 2.0Systematic review of IEC 61086-1 (1992) | DEL
| B | ||||
IEC 61086-1 Ed. 1.0Specification for coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements | DELPUB
| B | ||||
IEC 61086-1 Ed. 2.0Coatings for loaded printed wire boards (conformal coatings) - Part 1: Definitions, classification and general requirements | PPUB
| B | yes | Webstore | ||
IEC 61086-2 Ed. 1.0Specification for coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test | DELPUB
| B | 15C(C.O.)294 | |||
IEC 61086-2 Ed. 2.0Coatings for loaded printed wire boards (conformal coatings) - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 61086-2 fC1 Ed. 2.0Corrigendum 1 | PPUB
| B | Webstore | |||
IEC 61086-3-1 Ed. 1.0Coatings for loaded printed wire boards (conformal coatings) - Part 3: Specifications for individual materials - Sheet 1: Coatings for general purpose (class I) and for high reliability (class II) | DELPUB
| B | yes | |||
IEC 61086-3-1 Ed. 2.0Coatings for loaded printed wire boards (conformal coatings) - Part 3-1: Specifications for individual materials - Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3) | PPUB
| B | yes | Webstore | ||
DEL/TS 61087 Ed. 2.0Systematic review of IEC 1087 (1991)
| DEL
| B | ||||
IEC 61212-1 Ed. 1.0Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: General requirements | DELPUB
| B | yes | 15C(C.O.)333 | ||
IEC 61212-1 Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | PPUB
| E | 2006-04 | yes | Webstore | |
IEC 61212-2 Ed. 1.0Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test | DELPUB
| B | yes | 15C/470 | ||
IEC 61212-2 Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 61212-2 ff Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test | MERGED
| F | 2009-05 | |||
IEC 61212-3-1 Ed. 1.0Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes | DELPUB
| B | yes | 15C/471 | ||
IEC 61212-3-1 Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes | PPUB
| E | 2006-04 | yes | Webstore | |
IEC 61212-3-1 Ed. 3.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes | CDIS
| B | 2013-05 | yes | ||
IEC 61212-3-2 Ed. 1.0Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes | DELPUB
| B | yes | 15C/472 | ||
IEC 61212-3-2 Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes | PPUB
| E | 2006-06 | yes | Webstore | |
IEC 61212-3-2 Ed. 3.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes | CDIS
| B | 2013-05 | yes | ||
IEC 61212-3-3 Ed. 1.0Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods | DELPUB
| B | yes | 15C/473 | ||
IEC 61212-3-3 Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods | PPUB
| B | 2006-09 | yes | Webstore | |
IEC 61212-3-3 ff Ed. 2.0Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods | MERGED
| F | 2009-05 | |||
IEC 61626 Ed. 1.0Specifications for moulding materials used in electrical applications | DEL
| E | 15C(Sec.)292 | |||
IEC 61628-1 Ed. 1.0Corrugated pressboard and presspaper for electrical purposes - Part 1: Definitions, designations and general requirements
| PPUB
| B | 1997-06 | yes | Webstore | |
IEC 61628-2 Ed. 1.0Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 61628-2 Ed. 1.1Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test | PPUB
| B | Webstore | |||
IEC 61628-2 am1 Ed. 1.0Amendment 1: Corrugated pressboard and presspaper for electrical purposes - Part 2: Methods of test | PPUB
| B | 2007-05 | yes | Webstore | |
IEC 61629-1 Ed. 1.0Aramid pressboard for electrical purposes - Part 1: Definitions,
designations and general requirements
| PPUB
| B | yes | Webstore | ||
IEC 61629-2 Ed. 1.0Aramid pressboard for electrical purposes - Part 2: Methods of
test
| PPUB
| B | yes | Webstore | ||
IEC 62011-1 Ed. 1.0Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements | PPUB
| B | yes | Webstore | ||
IEC 62011-2 Ed. 1.0Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test | PPUB
| B | yes | Webstore | ||
IEC 62011-3-1 Ed. 1.0Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section | PPUB
| B | yes | Webstore | ||
IEC 62329-1 Ed. 1.0Heat shrinkable moulded shapes - Part 1: Definitions and general requirements | PPUB
| E | yes | Webstore | ||
IEC 62329-2 Ed. 1.0Heat-shrinkable moulded shapes - Part 2: Methods of test
| PPUB
| B | 2006-08 | yes | Webstore | |
IEC 62329-2 ff Ed. 1.0Heat-shrinkable moulded shapes - Part 2: Methods of test | MERGED
| F | 2009-05 | |||
IEC 62329-3 f1 Ed. 1.0Heat shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions and material and compatibility performance
| DEL
| E | 15C/1319 | |||
IEC 62329-3-100 Ed. 1.0Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat-shrinkable moulded shape dimensions | PPUB
| B | 2010-06 | yes | Webstore | |
IEC 62329-3-101 Ed. 1.0Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
| PPUB
| B | 2010-06 | yes | Webstore | |
IEC 62329-3-102 Ed. 1.0Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance | PPUB
| B | 2010-06 | yes | Webstore | |
IEC/TR 62392 f1 Ed. 1.0Suitability of typical electrical insulating material for polymer recycling | MERGED
| E | ||||
IEC/TR 62422 Ed. 1.0Environmental characterization of solid insulating materials | PPUB
| E | 2007-07 | no | Webstore | |
IEC 62677-1 Ed. 1.0Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements | ADIS
| B | 2014-02 | yes | ||
IEC 62677-2 Ed. 1.0Heat shrinkable low and medium voltage moulded shapes - Part 2: Methods of test | ACDV
| E | 2014-07 | yes | ||
IEC 62677-3 Ed. 1.0Flexible insulating sleeving for heat shrinkable low and medium voltage moulded shapes - Part 3 : Specification requirements for shape dimensions and material performance
| ANW
| E | 2013-03 | 15/542 | ||
IEC 62677-3-100 Ed. 1.0Heat Shrinkable Low and Medium Voltage Moulded Shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 100: Heat shrinkable low and medium voltage moulded shape dimensions | DEL
| E |
17 kB