International
Electrotechnical
Commission
International Standards and Conformity Assessment
for all electrical, electronic and related technologies
TC 40 |
Capacitors and resistors for electronic equipment |
TC 40 Project files
 Project Reference |  Current Stage | Language | Frcst Date | CLC | Document Reference | Downloads |
|---|---|---|---|---|---|---|
PNW 40-12-12 Ed. 1.0Amendment to IEC 286-2 - Tape packaging of components with unidirectional leads and lead spacings 5, 22.5 and 27.5 mm on continuous tapes | DEL
| E | ||||
PNW 40-795 Ed. 1.0Amendment to IEC 384-4
| DEL
| E | 40/795 | |||
PNW 40-796 Ed. 1.0Amendment to IEC 384-4-1
| DEL
| E | 40/796 | |||
PNW 40-939 Ed. 1.0Packaging of components for automatic handling - Part X: Reusable and/or recyclable plastic reels | DEL
| E | 40/939 | |||
PNW 40-1307 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 23-2: Blank detail specification: Surface mount fixed metallized polyethylene naphtalate film dielectric d.c. capacitors - Assessment level EZ | DEL
| E | 40/1307A | |||
IEC 60062 Ed. 4.0Marking codes for resistors and capacitors | DELPUB
| B | ||||
IEC 60062 Ed. 5.0Marking codes for resistors and capacitors | PPUB
| E | yes | Webstore | ||
BPUB
| F | 2013-02 | ||||
IEC 60062 am1 Ed. 4.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60063 Ed. 2.0Preferred number series for resistors and capacitors. Second edition (1963) incorporating Amendments No. 1 (1967) and No. 2 (1977) | PPUB
| B | Webstore | |||
IEC 60063 Ed. 3.0Systematic review of IEC 63 (1963) | DEL
| B | ||||
DEL 60080 Ed. 3.0Systematic review of IEC 80 (1964)
| DEL
| B | ||||
IEC 60080 Ed. 2.0Fixed capacitors for direct current using impregnated paper or paper/plastic film dielectric | WPUB
| B | ||||
IEC 60115-1 Ed. 2.0Fixed resistors for use in electronic equipment. Part 1: Generic specification | DELPUB
| B | ||||
IEC 60115-1 Ed. 3.0Fixed resistors for use in electronic equipment - Part 1: Generic specification | DELPUB
| E | 1999-02 | yes | ||
IEC 60115-1 Ed. 3.1Fixed resistors for use in electronic equipment - Part 1: Generic specification | DELPUB
| E | ||||
IEC 60115-1 Ed. 4.0Fixed resistors for use in electronic equipment - Part 1: Generic specification | PPUB
| E | 2008-06 | no | Webstore | |
IEC 60115-1 am1 Ed. 3.0Amendement 1 | DELPUB
| E | 2001-02 | yes | ||
IEC 60115-1 am2 Ed. 2.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60115-1 am3 Ed. 2.0Amendment No. 3 | DELPUB
| B | ||||
IEC 60115-1 am4 Ed. 2.0Amendment No. 4 | DELPUB
| B | 40(C.O.)758 | |||
IEC 60115-2 Ed. 2.0Fixed resistors for use in electronic equipment. Part 2: Sectional specification: Fixed low-power non-wirewound resistors | PPUB
| B | Webstore | |||
IEC 60115-2 Ed. 3.0Fixed resistors for use in electronic equipment- Part 2: Sectional specification: Fixed low-power non-wirewound resistors | CCDV
| B | 2011-05 | yes | ||
IEC 60115-2 f1 Ed. 3.0Systematic review of IEC 115-2 (1982)
| MERGED
| B | ||||
IEC 60115-2-1 Ed. 1.0Fixed resistors for use in electronic equipment. Part 2: Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-2-1 Ed. 2.0Systematic review of IEC 115-2-1 (1982)
| DEL
| B | ||||
IEC 60115-2-2 Ed. 1.0Fixed resistors for use in electronic equipment - Part 2: Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level F | WPUB
| B | 40(C.O.)722 | |||
IEC 60115-4 Ed. 2.0Fixed resistors for use in electronic equipment. Part 4: Sectional specification: Fixed power resistors | PPUB
| B | Webstore | |||
IEC 60115-4 am1 Ed. 2.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60115-4-1 Ed. 1.0Fixed resistors for use in electronic equipment. Part 4: Blank detail specification: Fixed power resistors. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-4-1 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60115-4-2 Ed. 1.0Fixed resistors for use in electronic equipment - Part 4-2: Blank detail specification: Fixed power resistors. Assessment level F | WPUB
| B | 40(C.O.)720 | |||
IEC 60115-4-3 Ed. 1.0Fixed resistors for use in electronic equipment - Part 4: Blank detail specification: Fixed power resistors, heat-sink types. Assessment level H | WPUB
| B | 40(C.O.)759 | |||
IEC 60115-4-101 Ed. 1.0Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 5%. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-4-102 Ed. 1.0Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 1%. Assessment level E | WPUB
| B | 1995-04 | |||
IEC 60115-5 Ed. 2.0Fixed resistors for use in electronic equipment. Part 5: Sectional specification: Fixed precision resistors | PPUB
| B | Webstore | |||
IEC 60115-5 Ed. 3.0Systematic review of IEC 115-5 (1982)
| DEL
| B | ||||
IEC 60115-5-1 Ed. 1.0Fixed resistors for use in electronic equipment. Part 5: Blank detail specification: Fixed precision resistors. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-5-1 Ed. 2.0Systematic review of IEC 115-5-1 (1983)
| DEL
| B | ||||
IEC 60115-5-2 Ed. 1.0Fixed resistors for use in electronic equipment - Part 5: Blank detail specification: Fixed precision resistors. Assessment level F | WPUB
| B | 40(C.O.)721 | |||
IEC 60115-5-101 Ed. 1.0Fixed resistors for use in electronic equipment - Part 5: Detail
specification: Fixed precision wirewound resistors with
solderable axial wire leads - Stability class 0,1% - Assessment
level E
| WPUB
| B | 1995-02 | 40(C.O.)815 | ||
IEC 60115-6 Ed. 1.0Fixed resistors for use in electronic equipment. Part 6: Sectional specification Fixed resistor networks with individually measurable resistors | PPUB
| B | Webstore | |||
IEC 60115-6 Ed. 2.0Systematic review of IEC 115-6 (1983)
| DEL
| B | ||||
IEC 60115-6 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60115-6-1 Ed. 1.0Fixed resistors for use in electronic equipment. Part 6: Blank detail specification: Fixed resistor networks with individually measurable resistors, all of equal value and equal dissipation. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-6-1 Ed. 2.0Systematic review of IEC 115-6-1 (1983)
| DEL
| B | ||||
IEC 60115-6-2 Ed. 1.0Fixed resistors for use in electronic equipment. Part 6: Blank detail specification: Fixed resistor networks with individually measurable resistors, of either resistance values or rated dissipations. Assessment level E | WPUB
| B | ||||
IEC 60115-6-2 Ed. 2.0Systematic review of IEC 115-6-2 (1983)
| DEL
| B | ||||
IEC 60115-6-101 Ed. 1.0Fixed resistors for use in electronic equipment - Part 6: Detail specification: Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1 (dual-in-line network) | WPUB
| B | ||||
IEC 60115-6-102 Ed. 1.0Fixed resistors for use in electronic equipment - Part 6: Detail specification: Fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation, class 1 (single-in-line network) | WPUB
| B | ||||
IEC 60115-7 Ed. 1.0Fixed resistors for use in electronic equipment. Part 7: Sectional specification: Fixed resistor networks in which not all resistors are individually measurable | PPUB
| B | Webstore | |||
IEC 60115-7 Ed. 2.0Systematic review of IEC 115-7 (1984)
| DEL
| B | ||||
IEC 60115-7-1 Ed. 1.0Fixed resistors for use in electronic equipment. Part 7: Blank detail specifications: Fixed resistors networks in which not all resistors are individually measurable. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-7-1 Ed. 2.0Systematic review of IEC 115-7-1 (1984)
| DEL
| B | ||||
IEC 60115-8 Ed. 1.0Fixed resistors for use in electronic equipment. Part 8: Sectional specification: Fixed chip resistors | DELPUB
| B | ||||
IEC 60115-8 Ed. 2.0Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors | PPUB
| B | 2009-01 | no | Webstore | |
IEC 60115-8 fF Ed. 2.0Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors | MERGED
| F | 2012-09 | |||
DEL 60115-8 am1 Ed. 1.0Amendment to IEC TC 40 Standards for chip components (IEC 115-8, 115-8-1) | DEL
| E | 40(Sec.)637 | |||
IEC 60115-8 am1 Ed. 1.0Amendment 1 | DELPUB
| E | 2000-07 | |||
IEC 60115-8-1 Ed. 1.0Fixed resistors for use in electronic equipment. Part 8: Blank detail specification: Fixed chip resistors. Assessment level E | PPUB
| B | Webstore | |||
IEC 60115-8-1 Ed. 2.0Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification - Fixed chip resistors - Assessment level E | CCDV
| B | 2011-07 | yes | ||
IEC 60115-8-1 f1 Ed. 2.0Fixed resistors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed surface mount (SMD) resistors - Assessment level EZ | MERGED
| E | 2006-11 | |||
IEC 60115-9 Ed. 1.0Fixed resistors for use in electronic equipment - Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors | PPUB
| E | yes | Webstore | ||
IEC 60115-9-1 Ed. 1.0Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ | PPUB
| B | 2002-06 | yes | Webstore | |
IEC 60115-9-1 fF Ed. 1.0Fixed resistors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ | MERGED
| F | 2012-03 | |||
DEL 60166 Ed. 2.0Systematic review of IEC 166 (1965)
| DEL
| B | ||||
IEC 60166 Ed. 1.0Fixed metallized paper dielectric capacitors for direct current | WPUB
| B | ||||
IEC 60190 Ed. 1.0Non-wirewound potentiometers Type 2 | WPUB
| B | ||||
IEC 60190 Ed. 2.0Systematic review of IEC 190 (1966)
| DEL
| B | ||||
IEC 60195 Ed. 1.0Method of measurement of current noise generated in fixed resistors | PPUB
| B | Webstore | |||
IEC 60195 Ed. 2.0Systematic review of IEC 195 (1965)
| DEL
| B | ||||
IEC 60234 Ed. 1.0Dimensions of ceramic dielectric capacitors of the plate type | WPUB
| B | ||||
IEC 60234 Ed. 2.0Systematic review of IEC 234 (1967) | DEL
| B | ||||
IEC 60286-1 Ed. 1.0Packaging of components for automatic handling. Part 1: Tape packaging of components with axial leads on continuous tapes | DELPUB
| B | ||||
IEC 60286-1 Ed. 2.0Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
| PPUB
| B | yes | Webstore | ||
IEC 60286-2 Ed. 1.0Packaging of components for automatic handling. Part 2: Tape packaging of components with unidirectional leads on continuous tapes | DELPUB
| B | ||||
IEC 60286-2 Ed. 2.0Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes
| DELPUB
| B | 1997-11 | yes | ||
IEC 60286-2 Ed. 2.1Packaging of components for automatic handling - Part 2: Tape
packaging of components with unidirectional leads on continuous
tapes | DELPUB
| B | ||||
IEC 60286-2 Ed. 3.0Packaging of components for automatic handling - Part 2: Packing of components with unidirectional leads on continuous tapes | PPUB
| B | 2008-01 | yes | Webstore | |
IEC 60286-2 Ed. 4.0Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes | 1CD
| E | 2014-02 | yes | ||
IEC 60286-2 fF Ed. 3.0Packaging of components for automatic handling - Part 2: Packaging of components with unidirectional leads on continuous tapes | MERGED
| F | 2010-03 | |||
IEC 60286-2 am1 Ed. 2.0Amendment 1 | DELPUB
| B | 2002-11 | yes | ||
IEC 60286-3 Ed. 2.0Packaging of components for automatic handling - Part 3: Packaging of leadless components on continuous tapes | DELPUB
| B | ||||
IEC 60286-3 Ed. 3.0Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes | DELPUB
| B | 1997-11 | yes | ||
IEC 60286-3 Ed. 4.0Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes | PPUB
| B | 2007-06 | yes | Webstore | |
IEC 60286-3 Ed. 5.0IEC 60286-3 Ed.5: Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes | RDIS
| B | 2013-04 | yes | ||
IEC 60286-3 ff Ed. 4.0Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes | MERGED
| F | 2008-06 | |||
IEC 60286-3 am2 Ed. 2.0Amendment to Clauses 5 and 6 of IEC 286-3
| DEL
| E | 40(Sec.)711 | |||
IEC 60286-3-1 Ed. 1.0Packaging of components for automatic handling - Part 3-1: Packaging of surface mount components on continuous tapes - Type V - Pressed carrier tapes | PPUB
| E | 2009-05 | yes | Webstore | |
IEC 60286-3-2 Ed. 1.0Packaging of components for automatic handling - Part 3-2: Packaging of surface mount components on continuous tapes - Type VI - Blister carrier tapes of 4 mm width | PPUB
| E | 2009-05 | yes | Webstore | |
IEC 60286-4 Ed. 1.0Packaging of components for automatic handling - Part 4: Stick magazines for dual-in-line packages | DELPUB
| B | ||||
IEC 60286-4 Ed. 2.0Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of form E and G | PPUB
| B | yes | Webstore | ||
IEC 60286-4 Ed. 3.0Packaging of components for automatic handling - Part 4: Stick magazines for electronic components encapsulated in packages of different forms | ADIS
| B | 2013-10 | yes | ||
IEC 60286-5 Ed. 1.0Packaging of components for automatic handling - Part 5: Matrix trays | DELPUB
| B | ||||
IEC 60286-5 Ed. 2.0Packaging of components for automatic handling - Part 5: Matrix trays
| PPUB
| E | yes | Webstore | ||
IEC 60286-5 Ed. 2.1Packaging of components for automatic handling - Part 5: Matrix trays | PPUB
| E | Webstore | |||
IEC 60286-5 am1 Ed. 2.0Amendment 1 - Packaging of components for automatic handling - Part 5: Matrix trays | PPUB
| E | 2009-02 | yes | Webstore | |
IEC 60286-6 Ed. 1.0Packaging of components for automatic handling - Part 6: Bulk
case packaging for surface mounting components
| DELPUB
| B | yes | |||
IEC 60286-6 Ed. 2.0Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components | PPUB
| B | yes | Webstore | ||
IEC 60286-6 Ed. 3.0IEC 60286-6: Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components | DEL
| E | yes | 40/2028 | ||
IEC 60294 Ed. 1.0Measurement of the dimensions of a cylindrical component having two axial terminations | DELPUB
| B | ||||
IEC 60294 Ed. 2.0Measurement of the dimensions of a cylindrical component with axial terminations
| PPUB
| B | 2012-07 | yes | Webstore | |
IEC 60294 f1 Ed. 2.0Systematic review of IEC 294 (1969)
| MERGED
| B | ||||
IEC 60301 Ed. 2.0Preferred diameters of wire terminations of capacitors and resistors | DELPUB
| B | ||||
IEC 60301 Ed. 3.0Preferred diameters of wire terminations of capacitors and resistors | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 60301 f1 Ed. 3.0Systematic review of IEC 301 (1971)
| MERGED
| B | ||||
IEC 60301 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60324 Ed. 1.0Ceramic dielectric capacitors Type 3 | WPUB
| B | ||||
IEC 60324 Ed. 2.0Systematic review of IEC 324 (1970) | DEL
| B | ||||
IEC 60334-1 Ed. 1.0Air dielectric rotary variable capacitors. Part 1: General requirements for tests and measuring methods | WPUB
| B | ||||
IEC 60334-1 Ed. 2.0Systematic review of IEC 334-1 (1970)
| DEL
| B | ||||
IEC 60334-1A Ed. 1.0Air dielectric rotary variable capacitors - Part 1: General requirements for tests and measuring methods - First supplement | WPUB
| B | ||||
IEC 60334-1A Ed. 2.0Systematic review of IEC 334-1A (1974)
| DEL
| B | ||||
IEC 60384-1 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 1: Generic specification | DELPUB
| B | ||||
IEC 60384-1 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 1: Generic specification | DELPUB
| B | 1999-02 | yes | ||
IEC 60384-1 Ed. 4.0Fixed capacitors for use in electronic equipment - Part 1: Generic specification | PPUB
| E | 2008-07 | yes | Webstore | |
IEC 60384-1 Ed. 5.0Fixed capacitors for use inelectronic equipment - Part 1: Generic specification | AMW
| E | 2014-02 | yes | 40/2094 | |
IEC 60384-1 f2 Ed. 3.0Amendments to IEC 384-1 (1982): Fixed capacitors for use in
electronic equipment - Part 1: Generic specification
| MERGED
| E | 40/780 | |||
IEC 60384-1 fC1 Ed. 4.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 1: Generic specification | PPUB
| E | Webstore | |||
IEC 60384-1 am2 Ed. 2.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60384-1 am3 Ed. 2.0Amendment No. 3 | DELPUB
| B | ||||
IEC 60384-1 am4 Ed. 2.0Amendment No. 4 | DELPUB
| B | ||||
IEC 60384-1 am5 f1 Ed. 2.0Introduction of a new assessment level EZ
| DEL
| E | ||||
IEC 60384-1 am5 f2 Ed. 2.0Amendment to IEC 384-1 for the introduction of procedures for Capability Approval of fixed capacitors | DEL
| E | 40(Sec.)707 | |||
IEC/TR 60384-1-1 Ed. 1.0To develop a revised Substrate Bending Test for multilayer
ceramic surface mount capacitors, to possibly replace the present
TC 40 test method (IEC 384-1, Amendment 3, clause 4.35 and IEC
115-1, Amendment 3, clause 4.33) and IEC 68-2-21, Amendment 2,
Test Ue1
| DEL
| E | 40/916 | |||
IEC 60384-2 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors | DELPUB
| B | ||||
IEC 60384-2 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors | DELPUB
| E | 2005-12 | yes | ||
IEC 60384-2 Ed. 4.0Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene
terephthalate film dielectric d.c. capacitors
| PPUB
| B | 2011-12 | yes | Webstore | |
MERGED
| E | |||||
IEC 60384-2 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60384-2 am2 Ed. 2.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60384-2-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 2: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-2-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ | PPUB
| E | yes | Webstore | ||
MERGED
| E | |||||
IEC 60384-2-1 f1 Ed. 2.0Systematic review of IEC 384-2-1 (1982)
| MERGED
| B | ||||
IEC 60384-2-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60384-3 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 3: Sectional specification: Fixed tantalum chip capacitors | DELPUB
| B | ||||
IEC 60384-3 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte | PPUB
| B | 2006-10 | yes | Webstore | |
IEC 60384-3 fC1 Ed. 3.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte | PPUB
| E | Webstore | |||
IEC 60384-3 ff Ed. 3.0Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte | MERGED
| F | 2008-06 | |||
IEC 60384-3 am1 Ed. 2.0Amendment to IEC 384-3 (1989): Fixed capacitors for equipment -
Part 3: Sectional specification: Fixed tantalum chip capacitors
| CAN
| B | ||||
IEC 60384-3-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 3: Blank detail specification: Fixed tantalum chip capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-3-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ | PPUB
| B | 2006-10 | yes | Webstore | |
IEC 60384-3-1 fC1 Ed. 2.0Corrigendum 1 | CAN
| E | ||||
IEC 60384-3-1 ff Ed. 2.0Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ | MERGED
| F | 2008-06 | |||
IEC 60384-3-1 am1 Ed. 1.0Amendment to IEC 384-3-1 (1989): Fixed capacitors for equipment
- Part 3-1: Blank detail specification: Fixed tantalum chip
capacitors. Assessment level E
| CAN
| B | ||||
DEL 60384-3-101 Ed. 2.0Maintenance cycle report on 60384-3-101: Fixed capacitors for use in electronic equipment - Part 3-101: Detail specification: Fixed tantalum chip capacitors for surface mounting with solid electrolyte and porous anode, style I. Assessment level E | DEL
| E | yes | 40/1398 | ||
IEC 60384-3-101 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 3-101: Detail specification: Fixed tantalum chip capacitors for surface mounting with solid electrolyte and porous anode, style I. Assessment level E | PPUB
| B | Webstore | |||
IEC 60384-4 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 4: Sectional specification: Aluminium electrolytic capacitors with solid or non-solid electrolyte | DELPUB
| B | ||||
IEC 60384-4 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte | DELPUB
| B | ||||
IEC 60384-4 Ed. 4.0Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte | PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60384-4 fC1 Ed. 4.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte | PPUB
| E | Webstore | |||
IEC 60384-4 ff Ed. 4.0Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrlyte | MERGED
| F | 2008-06 | |||
IEC 60384-4 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60384-4 am1 Ed. 3.0Amendment 1 | DELPUB
| E | yes | |||
IEC 60384-4 am2 Ed. 2.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60384-4 am3 f3 Ed. 2.0Amendment to IEC 384-4 (1985), Part 4: Sectional specifiaction:
Aluminium electrolytic capacitors with solid and non-solid
electrolyte
| MERGED
| B | ||||
IEC 60384-4-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 4: Blank detail specification: Aluminium electrolytic capacitors with non solid electrolyte. Assessment level E | DELPUB
| B | ||||
IEC 60384-4-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 4: Blank detail specification - Aluminium electrolytic capacitors with non-solid electrolyte - Assessment level E | DELPUB
| E | ||||
IEC 60384-4-1 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ | PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60384-4-1 ff Ed. 3.0Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ | MERGED
| F | 2008-06 | |||
IEC 60384-4-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 40(C.O.)726 | |||
IEC 60384-4-1 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60384-4-2 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 4: Blank detail specification: Aluminium electrolytic capacitors with solid electrolyte. Assessment level E | DELPUB
| B | ||||
IEC 60384-4-2 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte - Assessment level EZ | PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60384-4-2 ff Ed. 2.0Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte - Assessment level EZ | MERGED
| F | 2008-06 | |||
IEC 60384-4-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 40(C.O.)756 | |||
IEC 60384-4-2 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60384-5 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 5: Sectional specification: Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V - Selection of methods of test and general requirements | WPUB
| B | 40(C.O.)740 | |||
IEC 60384-5-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 5: Blank detail specification: Fixed mica dielectric d.c. capacitors with a rated voltage not exceeding 3000 V. Assessment level E | WPUB
| B | 40(C.O.)741 | |||
IEC 60384-6 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 6: Sectional specification: Fixed metallized polycarbonate film dielectric d.c. capacitors | DELPUB
| B | ||||
IEC 60384-6 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors | WPUB
| E | 2005-07 | yes | ||
IEC 60384-6 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
DEL 60384-6-1 Ed. 2.0Systematic review of IEC 384-6-1 (1987) | DEL
| B | ||||
IEC 60384-6-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 6: Blank detail specification: Fixed metallized polycarbonate film dielectric d.c. capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-6-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification: Fixed metallized polycarbonate film dielectric d.c. capacitors - Assessment level E | WPUB
| E | 2005-07 | yes | ||
IEC 60384-7 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil d.c. capacitors | WPUB
| B | ||||
IEC 60384-7 Ed. 3.0Systematic review of IEC 384-7 Ed. 2 (1991) | DEL
| B | ||||
IEC 60384-7-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 7: Blank detail specification for fixed polystyrene film dielectric metal foil d.c. capacitors. Assessment level E | WPUB
| B | ||||
IEC 60384-7-1 Ed. 2.0Systematic review of IEC 384-7-1 (1991) | DEL
| B | ||||
IEC 60384-8 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 | DELPUB
| B | ||||
IEC 60384-8 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 | PPUB
| B | yes | Webstore | ||
IEC 60384-8 ff Ed. 3.0Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 | MERGED
| F | 2011-08 | |||
IEC 60384-8 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 40(C.O.)724 | |||
IEC 60384-8 am2 Ed. 2.0Amendment 2
| DELPUB
| E | ||||
IEC 60384-8-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 8: Blank detail specification: Fixed capacitors of ceramic dielectric, class 1. Assessment level E | DELPUB
| B | ||||
IEC 60384-8-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1 - Assessment level EZ | PPUB
| E | yes | Webstore | ||
IEC 60384-8-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 40(C.O.)724 | |||
IEC 60384-8-1 am2 Ed. 1.0Amendment 2 | DELPUB
| E | ||||
DEL 60384-9 Ed. 3.0Systematic review of IEC 384-9 (1988) | DEL
| B | ||||
IEC 60384-9 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 | DELPUB
| B | ||||
IEC 60384-9 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2 | PPUB
| E | yes | Webstore | ||
IEC 60384-9 am1 Ed. 2.0Amendment 1
| DELPUB
| E | ||||
DEL 60384-9-1 Ed. 2.0Systematic review of IEC 384-9-1 (1988)
| DEL
| B | ||||
IEC 60384-9-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 9: Blank detail specification: Fixed capacitors of ceramic dielectric, class 2. Assessment level E | DELPUB
| B | ||||
IEC 60384-9-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 - Assessment level EZ | PPUB
| E | yes | Webstore | ||
IEC 60384-9-1 fC1 Ed. 1.0Corrigendum | DELPUB
| E | ||||
IEC 60384-9-1 am1 Ed. 1.0Amendment 1 to IEC 60384-9-1 (1988)
| DEL
| E | ||||
IEC 60384-10 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 10: Sectional specification: Fixed multilayer ceramic chip capacitors | DELPUB
| B | ||||
IEC 60384-10 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 40(C.O.)731 | |||
IEC 60384-10 am2 Ed. 2.0Amendment 2
| DELPUB
| E | ||||
IEC 60384-10 am3 Ed. 2.0Amendment to IEC 60384-10: Fixed capacitors for use in electronic equipment - Part 10: Sectional specification: Fixed multilayer ceramic capacitors | DELPUB
| E | yes | 40/1119 | ||
IEC 60384-10-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 10: Blank detail specification: Fixed multilayer ceramic chip capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-10-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 40(C.O.)731 | |||
IEC 60384-11 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors | DELPUB
| B | ||||
IEC 60384-11 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors | PPUB
| B | 2008-03 | yes | Webstore | |
IEC 60384-11 fF Ed. 3.0Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors | MERGED
| F | 2011-09 | |||
IEC 60384-11 ff1 Ed. 3.0Systematic review of IEC 384-11 Ed. 2 (1988) | MERGED
| B | ||||
IEC 60384-11-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 11: Blank detail specification: Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-11-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ | PPUB
| E | 2008-03 | yes | Webstore | |
IEC 60384-11-1 f1 Ed. 2.0Systematic review of IEC 384-11-1 (1988) | MERGED
| B | ||||
IEC 60384-12 Ed. 2.0Fixed capacitors for use in electronic equipment. Part 12: Sectional specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors | WPUB
| B | ||||
IEC 60384-12 Ed. 3.0Systematic review of IEC 384-12 (1988)
| DEL
| B | ||||
IEC 60384-12-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 12: Blank detail specification: Fixed polycarbonate film dielectric metal foil d.c. capacitors. Assessment level E | WPUB
| B | ||||
IEC 60384-12-1 Ed. 2.0Systematic review of IEC 384-12-1 (1988)
| DEL
| B | ||||
DEL 60384-13 Ed. 3.0Systematic review of IEC 384-13 (1991)
| DEL
| B | ||||
IEC 60384-13 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil d.c. capacitors | DELPUB
| B | ||||
IEC 60384-13 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors | DELPUB
| E | 2006-01 | yes | ||
IEC 60384-13 Ed. 4.0Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
| PPUB
| B | 2011-12 | yes | Webstore | |
DEL 60384-13-1 Ed. 2.0Systematic review of IEC 384-13-1 (1991)
| DEL
| B | ||||
IEC 60384-13-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 13: Blank detail specification: Fixed polypropylene film dielectric metal foil d.c. capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-13-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E | PPUB
| E | yes | Webstore | ||
IEC 60384-13-1 fC1 Ed. 2.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E | PPUB
| E | Webstore | |||
IEC 60384-14 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains | DELPUB
| B | 40(C.O.)792 | |||
IEC 60384-14 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
| PPUB
| E | yes | Webstore | ||
IEC 60384-14 Ed. 4.0Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains | RDIS
| B | 2013-04 | yes | ||
IEC 60384-14 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60384-14-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 14: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains. Assessment level D | DELPUB
| B | ||||
IEC 60384-14-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D | PPUB
| E | yes | Webstore | ||
BPUB
| F | 2013-02 | ||||
IEC 60384-14-2 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only | PPUB
| E | yes | Webstore | ||
BPUB
| F | 2013-02 | ||||
IEC 60384-14-3 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 14-3: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
- Assessment level DZ
| PPUB
| E | yes | Webstore | ||
IEC 60384-15 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte | PPUB
| B | Webstore | |||
IEC 60384-15 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60384-15 am2 Ed. 1.0Amendment No. 2 | PPUB
| B | Webstore | |||
IEC 60384-15 am3 Ed. 1.0Amendment 3 to IEC 60384-15: Fixed capacitors for use in electronic equipment. Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte | CAN
| E | 2011-02 | no | 40/1986 | |
IEC 60384-15-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 15: Blank
detail specification: Fixed tantalum capacitors with non-solid
electrolyte and foil electrode. Assessment level E
| PPUB
| B | Webstore | |||
IEC 60384-15-1 Ed. 2.0Systematic review of IEC 384-15-1 (1984)
| DEL
| B | ||||
IEC 60384-15-2 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 15: Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte and process anode. Assessment level E | PPUB
| B | Webstore | |||
IEC 60384-15-2 Ed. 2.0Systematic review of IEC 384-15-2 (1984)
| DEL
| B | ||||
IEC 60384-15-3 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 15: Blank detail specification: Fixed tantalum capacitors with solid electrolyte and porous anode. Assessment level E | PPUB
| B | Webstore | |||
IEC 60384-15-3 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60384-16 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors | DELPUB
| B | ||||
IEC 60384-16 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors | PPUB
| E | yes | Webstore | ||
MERGED
| E | |||||
IEC 60384-16 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60384-16 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60384-16-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 16: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-16-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors - Assessment levels E and EZ | PPUB
| E | yes | Webstore | ||
MERGED
| E | |||||
IEC 60384-16-1 f1 Ed. 2.0Systematic review of IEC 384-16-1 (1982)
| MERGED
| B | ||||
IEC 60384-16-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60384-17 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors | DELPUB
| B | ||||
IEC 60384-17 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors | PPUB
| B | yes | Webstore | ||
IEC 60384-17 f1 Ed. 2.0Systematic review of IEC 384-17 (1987)
| MERGED
| B | ||||
IEC 60384-17 fF Ed. 2.0Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors | MERGED
| F | 2012-11 | |||
DEL
| E | |||||
IEC 60384-17-1 Ed. 1.0Fixed capacitors for use in electronic equipment. Part 17: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors. Assessment level E | DELPUB
| B | ||||
IEC 60384-17-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment levels E and EZ | PPUB
| E | yes | Webstore | ||
IEC 60384-17-1 f1 Ed. 2.0Systemtic review of IEC 384-17-1 (1987)
| MERGED
| B | ||||
DEL
| E | |||||
IEC 60384-18 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte | DELPUB
| B | 40(C.O.)732 | |||
IEC 60384-18 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte | PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60384-18 ff Ed. 2.0Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte | MERGED
| F | 2008-06 | |||
IEC 60384-18 am1 Ed. 1.0Amendment 1 | DELPUB
| B | ||||
IEC 60384-18 am1 f1 Ed. 1.0Amendment to IEC 384-18 (40(C.O.)732): Fixed capacitors for use in electronic equipment - Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid and non-solid electrolyte | DEL
| E | 40(Sec.)701 | |||
IEC 60384-18 am2 Ed. 1.0Amendment to IEC 384-18 (1993) | MERGED
| E | 40(JP)402 | |||
IEC 60384-18-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 18: Blank detail specification: Fixed aluminium electrolytic chip capacitors with solid electrolyte. Assessment level E | DELPUB
| B | 40(C.O.)733 | |||
IEC 60384-18-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) electrolyte - Assessment level EZ | PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60384-18-1 ff Ed. 2.0Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<sub>2</sub>) electrolyte - Assessment level EZ | MERGED
| F | 2008-06 | |||
IEC 60384-18-1 am1 Ed. 1.0Amendment 1 | DELPUB
| B | ||||
IEC 60384-18-1 am2 Ed. 1.0Amendment to IEC 384-18-1 (1993) | MERGED
| E | 40(JP)403 | |||
IEC 60384-18-2 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 18: Blank detail specification: Fixed aluminium electrolytic chip capacitors with non-solid electrolyte. Assessment level E | DELPUB
| B | 40(C.O.)734 | |||
IEC 60384-18-2 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ
| PPUB
| B | 2007-07 | yes | Webstore | |
IEC 60384-18-2 ff Ed. 2.0Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ | MERGED
| F | 2008-06 | |||
IEC 60384-18-2 am1 Ed. 1.0Amendment 1 to IEC 60384-18-2 | CAN
| B | ||||
IEC 60384-18-2 am2 Ed. 1.0Amendment to IEC 384-18-2 (1993) | MERGED
| E | 40(JP)404 | |||
IEC 60384-19 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors | DELPUB
| B | 40(C.O.)765 | |||
IEC 60384-19 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-
terephthalate film dielectric surface mount d.c. capacitors | PPUB
| B | yes | Webstore | ||
IEC 60384-19 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 19: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors | AMW
| E | 2014-02 | yes | 40/2100 | |
IEC 60384-19 fF Ed. 2.0Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors | MERGED
| F | 2011-10 | |||
IEC 60384-19-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 19: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric chip d.c. capacitors. Assessment level E | DELPUB
| B | 40(C.O.)766 | |||
IEC 60384-19-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ | PPUB
| E | yes | Webstore | ||
IEC 60384-20 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 20:
Sectional specification: Fixed metallized polyphenylene sulfide
film dielectric chip d.c. capacitors
| DELPUB
| B | 1996-09 | yes | ||
IEC 60384-20 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors | PPUB
| E | 2008-01 | yes | Webstore | |
IEC 60384-20 Ed. 3.0Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors | ACDV
| E | 2014-05 | yes | ||
IEC 60384-20 fC1 Ed. 2.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors | PPUB
| E | Webstore | |||
IEC 60384-20-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 20:
Blank detail specification: Fixed metallized polyphenylene
sulfide film dielectric chip d.c. capacitors. Assessment level EZ
| DELPUB
| B | 1996-09 | yes | ||
IEC 60384-20-1 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyethylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ | PPUB
| E | yes | Webstore | ||
IEC 60384-20-1 fC1 Ed. 2.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ | PPUB
| E | Webstore | |||
BPUB
| F | 2013-02 | ||||
DEL 60384-21 Ed. 1.0IEC 384-21: Fixed capacitors for use in electronic equipment -
Part ...: Sectional specification: Aluminium electrolytic
capacitors with non-solid electrolyte (Capability Approval)
| DEL
| E | 40(Sec.)708 | |||
IEC 60384-21 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 | DELPUB
| E | 2004-07 | yes | ||
IEC 60384-21 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 | PPUB
| B | 2011-12 | yes | Webstore | |
IEC 60384-21 fC1 Ed. 1.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 | DELPUB
| E | ||||
DEL 60384-21-1 Ed. 1.0IEC 384-21-1: Fixed capacitors for use in electronic equipment -
Part ...: Blank detail specification: Aluminium electrolytic
capacitors with non-solid electrolyte (Capability Approval)
| DEL
| E | 40(Sec.)709 | |||
IEC 60384-21-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ | PPUB
| E | 2002-11 | yes | Webstore | |
IEC 60384-21-1 fC1 Ed. 1.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 - Assessment level EZ | PPUB
| E | Webstore | |||
IEC 60384-22 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
| DELPUB
| E | 2004-07 | yes | ||
IEC 60384-22 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 | PPUB
| B | 2011-12 | yes | Webstore | |
IEC 60384-22 fC1 Ed. 1.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 | DELPUB
| E | ||||
IEC 60384-22-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ
| PPUB
| E | yes | Webstore | ||
IEC 60384-22-1 fC1 Ed. 1.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 - Assessment level EZ | PPUB
| E | Webstore | |||
IEC 60384-23 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors | PPUB
| B | yes | Webstore | ||
IEC 60384-23 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors | AMW
| E | 2014-02 | yes | 40/2096 | |
IEC 60384-23 fF Ed. 1.0Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors | MERGED
| F | ||||
IEC 60384-23-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ | PPUB
| B | yes | Webstore | ||
IEC 60384-23-1 fF Ed. 1.0Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ | MERGED
| F | ||||
IEC 60384-24 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte | PPUB
| E | 2006-07 | yes | Webstore | |
IEC 60384-24 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte | ACDV
| E | 2014-05 | yes | ||
IEC 60384-24 fC1 Ed. 1.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte | PPUB
| E | Webstore | |||
IEC 60384-24-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ | PPUB
| E | 2006-07 | yes | Webstore | |
BPUB
| F | 2013-02 | ||||
IEC 60384-25 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | PPUB
| E | 2006-07 | yes | Webstore | |
IEC 60384-25 Ed. 2.0Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | ACDV
| E | 2014-05 | yes | ||
IEC 60384-25 fC1 Ed. 1.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | PPUB
| E | Webstore | |||
IEC 60384-25-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 25-1: Blank detail specification - Surface mount fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ | PPUB
| E | 2006-07 | yes | Webstore | |
BPUB
| F | 2013-02 | ||||
IEC 60384-26 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte | PPUB
| B | 2010-09 | yes | Webstore | |
IEC 60384-26-1 Ed. 1.0Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ | PPUB
| B | 2010-09 | yes | Webstore | |
IEC/TR 60385 Ed. 1.0Passive components - An overview of the emerging technologies | CAN
| E | ||||
IEC 60393-1 Ed. 2.0Potentiometers for use in electronic equipment. Part 1: Generic specification | DELPUB
| B | ||||
IEC 60393-1 Ed. 3.0Potentiometers for use in electronic equipment - Part 1: Generic specification | PPUB
| E | 2008-05 | yes | Webstore | |
IEC 60393-1 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60393-2 Ed. 2.0Potentiometers for use in electronic equipment. Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometers | PPUB
| B | Webstore | |||
IEC 60393-2 Ed. 3.0Potentiometers for use in electronic equipment. Part 2: Sectional specification: Lead-screw actuated and rotary preset potentiometers | CCDV
| B | 2013-09 | yes | ||
IEC 60393-2 f1 Ed. 3.0Systematic review of IEC 393-2 (1989)
| MERGED
| B | ||||
IEC 60393-2-1 Ed. 1.0Potentiometers for use in electronic equipment. Part 2: Blank detail specification: Lead-screw actuated and rotary preset potentiometers. Assessment level E | PPUB
| B | Webstore | |||
IEC 60393-2-1 Ed. 2.0Systematic review of IEC 393-2-1 (1989)
| DEL
| B | ||||
IEC 60393-2-2 Ed. 1.0Potentiometers for use in electronic equipment - Part 2: Blank detail specification: Lead-screw actuated and rotary preset potentiometers. Assessment level F | PPUB
| B | Webstore | |||
IEC 60393-2-101 Ed. 1.0Potentiometers for use in electronic equipment - Part 2: Detail specification: Lead-screw actuated preset potentiometers - Stability class 5% - Assessment level E | PPUB
| B | Webstore | |||
IEC 60393-3 Ed. 2.0Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision potentiometers | PPUB
| B | Webstore | |||
IEC 60393-3-1 Ed. 1.0Potentiometers for use in electronic equipment - Part 3: Blank detail specification: Rotary precision potentiometers. Assessment level E | PPUB
| B | Webstore | |||
IEC 60393-4 Ed. 2.0Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers | PPUB
| B | Webstore | |||
IEC 60393-4-1 Ed. 1.0Potentiometers for use in electronic equipment - Part 4: Blank detail specification: Single-turn rotary power potentiometers. Assessment level E | PPUB
| B | Webstore | |||
IEC 60393-4-2 Ed. 1.0Potentiometers for use in electronic equipment - Part 4: Blank detail specification: Single-turn rotary power potentiometers. Assessment level F | PPUB
| B | Webstore | |||
IEC 60393-5 Ed. 2.0Potentiometers for use in electronic equipment - Part 5: Sectional specification: Single-turn rotary low-power wirewound and non-wirewound potentiometers | PPUB
| B | Webstore | |||
IEC 60393-5 Ed. 3.0Potentiometers for use in electronic equipment - Part 5: Sectional specification: single-turn rotary low-power wirewound and non-wirewound potentiometers | CCDV
| B | 2013-09 | yes | ||
IEC 60393-5-1 Ed. 1.0Potentiometers for use in electronic equipment - Part 5: Blank detail specification: Single-turn rotary low-power potentiometers. Assessment level E | PPUB
| B | Webstore | |||
IEC 60393-5-2 Ed. 1.0Potentiometers for use in electronic equipment - Part 5: Blank detail specification: Single-turn rotary low-power potentiometers. Assessment level F | PPUB
| B | Webstore | |||
IEC 60393-6 Ed. 1.0Potentiometers for use in electronic equipment - Part 6: Sectional specification: Surface mount preset potentiometers | PPUB
| E | no | Webstore | ||
IEC 60393-6 Ed. 2.0Potentiometers for use in electronic equipment - Part 6: Sectional specification: Surface mount preset potentiometers | CCDV
| B | 2013-09 | yes | ||
IEC 60393-6-1 Ed. 1.0Potentiometers for use in electronic equipment - Part 6-1: Blank detail specification: Surface mount preset potentiometers - Assessment level E
| PPUB
| E | no | Webstore | ||
IEC 60415-1 Ed. 1.0Plastic film dielectric rotary variable tuning capacitors: Grade 2. Part 1: General requirements for tests and measuring methods | WPUB
| B | ||||
IEC 60415-1 Ed. 2.0Systematic review of IEC 415-1 (1973) | DEL
| B | ||||
IEC 60418-1 Ed. 1.0Variable capacitors. Part 1: Terms and methods of test | PPUB
| B | Webstore | |||
IEC 60418-1 Ed. 2.0Systematic review of IEC 418-1 (1974) | DEL
| B | ||||
IEC 60418-1 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60418-1 am2 Ed. 1.0Amendment No. 2 | PPUB
| B | Webstore | |||
IEC 60418-2 Ed. 1.0Variable capacitors. Part 2: Type specification for variable tuning capacitors Type A | PPUB
| B | Webstore | |||
IEC 60418-2 Ed. 2.0Systematic review of IEC 418-2 (1976) | DEL
| B | ||||
IEC 60418-2 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60418-3 Ed. 1.0Variable capacitors. Part 3: Type specification for variable trimmer capacitors Type B | PPUB
| B | Webstore | |||
IEC 60418-3 Ed. 2.0Systematic review of IEC 418-3 (1976) | DEL
| B | ||||
IEC 60418-4 Ed. 1.0Variable capacitors. Part 4: Type specification for variable pre-set capacitors Type C | PPUB
| B | Webstore | |||
IEC 60418-4 Ed. 2.0Systematic review of IEC 418-4 (1976) | DEL
| B | ||||
IEC 60418-2A Ed. 1.0Variable capacitors - Part 2: Type specification for variable tuning capacitors Type A - First supplement: Blank detail specification for variable tuning capacitors Type A | PPUB
| B | Webstore | |||
IEC 60418-2A Ed. 2.0Systematic review of IEC 418-2A (1980) | DEL
| B | ||||
IEC 60418-2B Ed. 1.0Variable capacitors - Part 2: Type specification for variable tuning capacitors Type A - Second supplement: Blank detail specification for variable tuning capacitors Type A fitted with integral pre-set capacitors Type C | PPUB
| B | Webstore | |||
IEC 60418-2B Ed. 2.0Systematic review of IEC 418-2B (1980) | DEL
| B | ||||
IEC 60418-3A Ed. 1.0Variable capacitors - Part 3: Type specification for variable trimmer capacitors Type B - First supplement: Blank detail specification | PPUB
| B | Webstore | |||
IEC 60418-3A Ed. 2.0Systematic review of IEC 418-3A (1980) | DEL
| B | ||||
IEC 60418-4A Ed. 1.0Variable capacitors - Part 4: Type specification for variable pre-set capacitors Type C - First supplement: Blank detail specification | PPUB
| B | Webstore | |||
IEC 60418-4A Ed. 2.0Systematic review of IEC 418-4A (1980) | DEL
| B | ||||
IEC 60425 Ed. 1.0Guide for the choice of colours to be used for the marking of capacitors and resistors | PPUB
| B | Webstore | |||
IEC 60425 Ed. 2.0Systematic review of IEC 425 (1973)
| DEL
| B | ||||
IEC 60425 am1 Ed. 1.0Amendment 1 to IEC 60425: Guide for the choice of colours to be used for the marking of capacitors and resistors | PWI
| E | 2011-04 | no | 40/1989 | |
IEC 60440 Ed. 1.0Method of measurement of non-linearity in resistors | PPUB
| B | 2012-07 | yes | Webstore | |
IEC 60440 f1 Ed. 1.0Maintenance cycle report on IEC/TS 60440: Method of measurement of non-linearity in resistors | MERGED
| 40/2005 | ||||
IEC/TR 60440 Ed. 1.0Method of measurement of non-linearity in resistors | DELPUB
| B | ||||
IEC 60451 Ed. 1.0Maximum case dimensions for capacitors and resistors | WPUB
| B | ||||
IEC 60451 Ed. 2.0Systematic review of IEC 451 (1974)
| DEL
| B | ||||
IEC 60472-1 Ed. 1.0Solid dielectric tubular-style rotary variable pre-set capacitors: Grade 2. Part 1: General requirements for tests and measuring methods | WPUB
| B | ||||
IEC 60472-1 Ed. 2.0Systematic review of IEC 472-1 (1974) | DEL
| B | ||||
IEC 60499-1 Ed. 1.0Ceramic dielectric disk-style rotary variable pre-set capacitors: Grade 2. Part 1: General requirements for tests and measuring methods | WPUB
| B | ||||
IEC 60499-1 Ed. 2.0Systematic review of IEC 499-1 (1974) | DEL
| B | ||||
IEC 60539 Ed. 1.0Directly heated negative temperature coefficient thermistors | DELPUB
| B | ||||
IEC 60539-1 Ed. 1.0Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
| DELPUB
| E | 2002-01 | yes | ||
IEC 60539-1 Ed. 2.0Directly heated negative temperature coefficient thermistors - Part 1: Generic specification | PPUB
| B | 2008-02 | yes | Webstore | |
IEC 60539-1 fF Ed. 2.0Directly heated negative temperature coefficient thermistors - Part 1: Generic specification | MERGED
| F | 2011-11 | |||
IEC/PAS 60539-1-1 Ed. 1.0Directly heated negative temperature coefficient thermistors - Part 1-1: Blank detail specification - Sensing application - Assessment level EZ | PPUB
| E | 2008-12 | Webstore | ||
IEC 60539-2 Ed. 1.0Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors | PPUB
| B | yes | Webstore | ||
IEC 60539-2 Ed. 1.1Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors | PPUB
| B | Webstore | |||
IEC 60539-2 fF Ed. 1.0Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors | MERGED
| F | 2010-07 | |||
IEC 60539-2 am1 Ed. 1.0Amendment 1 - Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors | PPUB
| B | 2010-07 | yes | Webstore | |
IEC 60612 Ed. 1.0Guide to the use of variable capacitors in electronic equipment | WPUB
| B | ||||
IEC 60612 Ed. 2.0Systematic review of IEC 612 (1978) | DEL
| B | ||||
IEC 60696 Ed. 1.0Indirectly heated thermistors with negative temperature coefficient (NTC-I) | WPUB
| B | ||||
IEC 60696 Ed. 2.0Systematic review of IEC 696 (1981)
| DEL
| B | ||||
IEC 60717 Ed. 1.0Method for determination of the space required by capacitors and resistors with unidirectional terminations | DELPUB
| B | ||||
IEC 60717 Ed. 2.0Method for the determination of the space required by capacitors and resistors with unidirectional terminations | PPUB
| B | 2012-05 | yes | Webstore | |
IEC 60717 f1 Ed. 2.0Systematic review of IEC 717 (1981)
| MERGED
| B | ||||
IEC 60738-1 Ed. 1.0Directly heated positive step-function temperature coefficient thermistors. Part 1: Generic specification | DELPUB
| B | ||||
IEC 60738-1 Ed. 2.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1: Generic specification | DELPUB
| E | yes | |||
IEC 60738-1 Ed. 3.0Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification | PPUB
| E | 2006-03 | yes | Webstore | |
IEC 60738-1 Ed. 3.1Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification | PPUB
| E | Webstore | |||
IEC 60738-1 am1 Ed. 3.0Amendment 1 - Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification | PPUB
| E | 2009-06 | yes | Webstore | |
IEC 60738-1-1 Ed. 1.0Directly heated positive step-function temperature coefficient thermistors. Part 1: Blank detail specification. Assessment level E | DELPUB
| B | ||||
IEC 60738-1-1 Ed. 2.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ | DELPUB
| E | 1998-12 | yes | ||
IEC 60738-1-1 Ed. 3.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application - Assessment level EZ | PPUB
| E | 2008-02 | yes | Webstore | |
BPUB
| F | 2013-02 | ||||
IEC 60738-1-2 Ed. 1.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessmen level EZ | DELPUB
| E | 1998-12 | yes | ||
IEC 60738-1-2 Ed. 2.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-2: Blank detail specification - Heating element application - Assessment level EZ | PPUB
| E | 2008-02 | yes | Webstore | |
IEC 60738-1-3 Ed. 1.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ | DELPUB
| E | 1998-12 | yes | ||
IEC 60738-1-3 Ed. 2.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-3: Blank detail specification - Inrush current application - Assessment level EZ | PPUB
| E | 2008-02 | yes | Webstore | |
IEC 60738-1-4 Ed. 1.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ | DELPUB
| E | 1998-12 | yes | ||
IEC 60738-1-4 Ed. 2.0Thermistors - Directly heated positive step-function temperature coefficient - Part 1-4: Blank detail specification - Sensing application - Assessment level EZ | PPUB
| E | 2008-02 | yes | Webstore | |
IEC 60915 Ed. 1.0Capacitors and resistors for electronic equipment. Preferred dimensions of spindle ends, bushes and for the mounting of single-hole, bush-mounted, spindle-operated electronic components | DELPUB
| B | ||||
IEC 60915 Ed. 2.0Fixed capacitors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | PPUB
| B | 2006-11 | yes | Webstore | |
IEC 60915 fC1 Ed. 2.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | PPUB
| B | Webstore | |||
IEC 60915 fC1E Ed. 2.0Corrigendum 1 - Fixed capacitors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | PPUB
| E | Webstore | |||
IEC 60915 fC2 Ed. 2.0Corrigendum 2 - Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | PPUB
| E | Webstore | |||
IEC 60915 ff Ed. 2.0Fixed capacitors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | MERGED
| F | 2008-06 | |||
IEC 60938-1 Ed. 1.0Fixed inductors for radio interference suppression. Part 1: Generic specification | DELPUB
| B | ||||
IEC 60938-1 Ed. 2.0Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
| PPUB
| B | yes | Webstore | ||
IEC 60938-1 Ed. 2.1Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification | PPUB
| E | Webstore | |||
IEC 60938-1 ff Ed. 2.0Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification | MERGED
| F | 2008-06 | |||
IEC 60938-1 am1 Ed. 2.0Amendment 1 - Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification
| PPUB
| B | 2006-09 | yes | Webstore | |
IEC 60938-1 am1 ff Ed. 2.0Amendment 1 - Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification | MERGED
| F | 2008-06 | |||
IEC 60938-2 Ed. 1.0Fixed inductors for radio interference suppression. Part 2: Sectional specification. Selection of methods of test and general requirements | DELPUB
| B | ||||
IEC 60938-2 Ed. 2.0Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification
| PPUB
| B | yes | Webstore | ||
IEC 60938-2 Ed. 2.1Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification | PPUB
| E | Webstore | |||
IEC 60938-2 ff Ed. 2.0Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification | MERGED
| F | 2008-06 | |||
IEC 60938-2 am1 Ed. 2.0Amendment 1 - Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification | PPUB
| B | 2006-09 | yes | Webstore | |
IEC 60938-2 am1 ff Ed. 2.0Amendment 1 - Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification | MERGED
| F | 2008-06 | |||
IEC 60938-2-1 Ed. 1.0Fixed inductors for electromagnetic interference suppression -
Part 2-1: Blank detail specification - Inductors for which safety tests are required. Assessment level D
| PPUB
| E | yes | Webstore | ||
IEC 60938-2-2 Ed. 1.0Fixed inductors for electromagnetic interference suppression -
Part 2-2: Blank detail specification - Inductors for which safety tests are required (only)
| PPUB
| E | yes | Webstore | ||
BPUB
| F | 2013-02 | ||||
DEL 60939-1 Ed. 2.0Systematic review of IEC 939-1 (1988)
| DEL
| B | ||||
IEC 60939-1 Ed. 1.0Complete filter units for radio interference suppression. Part 1: Generic specification | DELPUB
| B | ||||
IEC 60939-1 Ed. 2.0Passive filter units for electromagnetic interference suppression - Part 1: Generic specification | DELPUB
| E | 2005-03 | yes | ||
IEC 60939-1 Ed. 3.0Passive filter units for electromagnetic interference suppression - Part 1: Generic specification
| PPUB
| B | 2010-08 | yes | Webstore | |
IEC 60939-1 fC1 Ed. 2.0Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 1: Generic specification | DELPUB
| E | ||||
IEC 60939-2 Ed. 1.0Complete filter units for radio interference suppression. Part 2: Sectional specification. Selection of methods of test and general requirements | DELPUB
| B | ||||
IEC 60939-2 Ed. 2.0Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification - Passive filter units for which safety tests are appropriate - Test methods and general requirements | PPUB
| E | 2004-01 | yes | Webstore | |
IEC 60939-2 fC1 Ed. 2.0Corrigendum 1 - Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements | PPUB
| E | Webstore | |||
IEC 60939-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60939-2-1 Ed. 1.0Complete filter units for radio interference suppression - Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (assessment level D/DZ)
| PPUB
| E | yes | Webstore | ||
IEC 60939-2-2 Ed. 1.0Complete filter units for radio interference suppression - Part 2-2: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (safety tests only)
| PPUB
| E | yes | Webstore | ||
BPUB
| F | 2013-02 | ||||
IEC 60939-3 Ed. 1.0Passive filter units for electromagnetic interference suppression - Part 3: Standard for passive filter units for which safety tests are appropriate
| 1CD
| E | 2014-09 | |||
IEC 60940 Ed. 1.0Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression | PPUB
| B | Webstore | |||
IEC 60940 f1 Ed. 1.0Amendment No. 1 to IEC 60940: Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interface suppresion | MERGED
| B | ||||
IEC 60940 fC1 Ed. 1.0CORRIGENDUM 1 | PPUB
| E | Webstore | |||
IEC 60940 am1 Ed. 1.0Amendment 1 to IEC 60940: Guidance information on the application of capacitors, resistors, inductors and complete filter units for radio interference suppression | PWI
| E | 2009-11 | no | ||
IEC 61045-1 Ed. 1.0Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification | WPUB
| B | ||||
IEC 61045-1 Ed. 2.0Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification | DEL
| E | 2007-09 | yes | ||
IEC 61045-1 f1 Ed. 2.0Systematic review of IEC 1045-1 (1991)
| MERGED
| B | ||||
IEC 61045-2 Ed. 1.0Fixed film resistor networks for use in electronic equipment - Part 2: Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure | WPUB
| B | ||||
IEC 61045-2 Ed. 2.0Systematic review of IEC 1045-2 (1991)
| DEL
| B | ||||
IEC 61045-2-1 Ed. 1.0Fixed film resistor networks for use in electronic equipment - Part 2: Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E | WPUB
| B | ||||
IEC 61045-2-1 Ed. 2.0Systematic review of IEC 1045-2-1 (1991)
| DEL
| B | ||||
IEC 61051-1 Ed. 1.0Varistors for use in electronic equipment - Part 1: Generic specification | DELPUB
| B | ||||
IEC 61051-1 Ed. 2.0Varistors for use in electronic equipement - Part 1: Generic specification | PPUB
| B | 2007-08 | yes | Webstore | |
IEC 61051-1 f1 Ed. 2.0Systematic review of IEC 1051-1 (1991)
| MERGED
| B | ||||
IEC 61051-1 fF Ed. 2.0Varistors for use in electronic equipment - Part 1: Generic specification | MERGED
| F | 2011-12 | |||
IEC 61051-2 Ed. 1.0Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors | PPUB
| B | Webstore | |||
IEC 61051-2 Ed. 2.0Systematic review of IEC 1051-2 (1991)
| DEL
| B | ||||
IEC 61051-2 am1 Ed. 1.0Amendment 1 - Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors | PPUB
| B | 2009-06 | no | Webstore | |
IEC 61051-2-1 Ed. 1.0Varistors for use in electronic equipment - Part 2: Blank detail specification for silicon carbide surge suppression varistors. Assessment level E | WPUB
| B | ||||
IEC 61051-2-1 Ed. 2.0Systematic review of IEC 1051-2-1 (1991)
| DEL
| B | ||||
IEC 61051-2-2 Ed. 1.0Varistors for use in electronic equipment - Part 2: Blank detail specification for zinc oxide surge suppression varistors. Assessment level E | PPUB
| B | Webstore | |||
IEC 61051-2-2 Ed. 2.0Systematic review of IEC 1051-2-2 (1991) | DEL
| E | ||||
IEC 62319-1 Ed. 1.0Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification
| PPUB
| E | yes | Webstore | ||
IEC 62319-1 fC1 Ed. 1.0Corrigendum 1 - Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1: Generic specification | PPUB
| E | Webstore | |||
IEC 62319-1-1 Ed. 1.0Polymeric thermistors - Directly heated positive step function temperature coefficient - Part 1-1: Blank detail specification - Current limiting application
| PPUB
| E | yes | Webstore | ||
BPUB
| F | 2013-02 | ||||
IEC 62378 Ed. 1.0Capacitors and Resistors - Conformity assessment procedures - Generic standard | DEL
| E | 40/1293 | |||
IEC 62391-1 Ed. 1.0Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 62391-1 Ed. 2.0Fixed electric double-layer capacitors for use in elecric and electronic equipment - Part 1: Generic specification | ACDV
| E | 2014-05 | yes | ||
IEC 62391-1 fF Ed. 1.0Fixed electric double-layer capacitors for use in electronic equipment - Part 1: Generic specification | MERGED
| F | 2012-02 | |||
IEC 62391-2 Ed. 1.0Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specification - Electric double-layer capacitors for power application | PPUB
| B | 2006-04 | yes | Webstore | |
IEC 62391-2 fF Ed. 1.0Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application | MERGED
| F | 2011-08 | |||
IEC 62391-2-1 Ed. 1.0Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1: Blank detail specification - Electric double-layer capacitors for power application - Assessment level EZ | PPUB
| E | 2006-04 | yes | Webstore | |
IEC 62490-1 Ed. 1.0ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment
| PPUB
| B | 2010-08 | yes | Webstore | |
IEC 62490-2 Ed. 1.0ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment
| PPUB
| B | 2010-08 | yes | Webstore | |
IEC 62812 Ed. 1.0Method of measurement of low resistance | ANW
| E | 2014-09 | 40/2125 | ||
IEC 62813 Ed. 1.0Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics | 1CD
| E | 2014-09 | |||
IEC 60103A Ed. 1.0Aluminium electrolytic capacitors for long life (Type 1) and for general purpose application (Type 2). *Note.-This publication has been superseded by IEC 384-4 (1977), but the supplements 103A, B, C and D are still valid. First supplement | WPUB
| B | ||||
IEC 60103A Ed. 2.0Systematic review of IEC 103A (1970) | DEL
| B | ||||
IEC 60103B Ed. 1.0Aluminium electrolytic capacitors for long life (Type 1) and for general purpose application (Type 2). *Note.-This publication has been superseded by IEC 384-4 (1977), but the supplements 103A, B, C and D are still valid. Second supplement | WPUB
| B | ||||
IEC 60103B Ed. 2.0Systematic review of IEC 103B (1970) | DEL
| B | ||||
IEC 60103C Ed. 1.0Aluminium electrolytic capacitors for long life (Type 1) and for general purpose application (Type 2). *Note.-This publication has been superseded by IEC 384-4 (1977), but the supplements 103A, B, C and D are still valid. Third supplement | WPUB
| B | ||||
IEC 60103C Ed. 2.0Systematic review of IEC 103C (1974) | DEL
| B | ||||
IEC 60103D Ed. 1.0Aluminium electrolytic capacitors for long life (Type 1) and for general purpose application (Type 2). *Note.-This publication has been superseded by IEC 384-4 (1977), but the supplements 103A, B, C and D are still valid. Fourth supplement | WPUB
| B | ||||
IEC 60103D Ed. 2.0Systematic review of IEC 103D (1975)
| DEL
| B | ||||
IEC 60234A Ed. 1.0First supplement | WPUB
| B | ||||
IEC 60234A Ed. 2.0Systematic review of IEC 234A (1970) | DEL
| B |
245 kB