International
Electrotechnical
Commission
International Standards and Conformity Assessment
for all electrical, electronic and related technologies
TC 20 |
Electric cables |
TC 20 Project files
 Project Reference |  Current Stage | Language | Frcst Date | CLC | Document Reference | Downloads |
|---|---|---|---|---|---|---|
PWI 20-1 Ed. 1.0Amendments to tests, arising from WG 15 follow up on requirements (Amendment to IEC 1238-1) | DEL
| E | ||||
PWI 20-2 Ed. 1.0Standard for application without halogens and without specific fire safety and smoke requirements | PWI
| E | ||||
PWI 20-3 Ed. 1.0Standard for ion chromatography combined with decomposition solution methodology | PWI
| E | ||||
PWI 20-4 Ed. 1.0Standard on environmental issues | PWI
| E | ||||
PNW 20-341 Ed. 1.0Cords and cables with copper conductors, NH thermoplastic material insulation and shesth, for maximum rated voltage 300/500 V | DEL
| E | 20/341 | |||
PNW 20-533 Ed. 1.0Electrical cable glands and accessories - Cable glands and accessories for general electrical installations | DEL
| E | 20/533 | |||
PNW 20-1414 Ed. 1.0IEC 60287-2-3: Electric cables - Calculation of the current rating - Part 2-3: cables installed in ventilated tunnels | PNW
| E | 20/1414 | |||
PNW 20-1420 Ed. 1.0Charging cables for electric vehicles | PNW
| E | 20/1420 | |||
PNW 20-1427 Ed. 1.0High Voltage Direct Current (HVDC) power transmission cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications - Test methods and requirements | PNW
| E | 20/1427 | |||
PWI 20A-24-2 Ed. 1.0Amendment to Table I of IEC 228 | DEL
| E | ||||
PWI 20A-27-8 Ed. 1.0Amendment to IEC 287 - Thermal resistance of single core cables with clearance between insulation and sheath | DEL
| E | 20A(Sec.)196 | |||
PWI 20A-31-4 Ed. 1.0Amendment to IEC 986 - Temperature of oversheaths | DEL
| E | ||||
PWI 20A-84-1 Ed. 1.0Internal thermal resistance of cables with different materials | DEL
| E | ||||
PWI 20A-85-1 Ed. 1.0Internal and external thermal resistance of non-metallic sheathed cables | DEL
| E | ||||
PWI 20A-86-1 Ed. 1.0External thermal resistance of large groups and duct banks underground | DEL
| E | ||||
PWI 20A-87-1 Ed. 1.0Cables laid in different materials | DEL
| E | ||||
PWI 20A-88-1 Ed. 1.0Non-isothermal ground surface | DEL
| E | ||||
PWI 20A-89-1 Ed. 1.0Moisture migration/ratings | DEL
| E | ||||
PWI 20A-90-1 Ed. 1.0Ratings for cables greater than 5 kV d.c.
| DEL
| E | ||||
PWI 20A-91-1 Ed. 1.0Sheath losses for double circuits | DEL
| E | ||||
PWI 20A-92-1 Ed. 1.0Collate tan and values | DEL
| E | ||||
PWI 20A-93 Ed. 1.0Extension to Higher voltage (Amendment to IEC 840) | DEL
| E | ||||
PWI 20A-94 Ed. 1.0To revise on combine IEC 724 and Amend. 1 to IEC 986 | DEL
| E | ||||
PWI 20A-95 Ed. 1.0TR3 on finite element methods
| DEL
| E | ||||
PWI 20A-96 Ed. 1.0Tests after installation (Amendment to IEC 502 and 840) | DEL
| E | ||||
PWI 20A-97 Ed. 1.0TR 3 on finite element methods | DEL
| E | ||||
PNW 20A-389 Ed. 1.0Amendment to IEC 60055-2 Inclusion of informative Annex on Tabulated ratings | DEL
| E | 20A/389 | |||
PWI 20C-15-1 Ed. 1.0Fire testing on conduit with cables | DEL
| E | ||||
PWI 20C-82-1 Ed. 1.0Test method for fire and smoke characteristics of electrical and
optical-fiber cables used in air-handling spaces
| DEL
| E | 20C(US)3 | |||
PWI 20C-83 Ed. 1.0Amendment to IEC 332-3 to include a protocol for bunches of
small diameter cables
| DEL
| E | ||||
PWI 20C-84 Ed. 1.0Fire resistance for testing cables in a metal enclosure
| DEL
| E | ||||
PWI 20C-85 Ed. 1.0Heat release and its possible application to electric cables and cable material | DEL
| E | ||||
IEC 60055-1 Ed. 4.0Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 1: Tests | DELPUB
| B | ||||
IEC 60055-1 Ed. 5.0Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories | PPUB
| B | Webstore | |||
IEC 60055-1 Ed. 5.1Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories | PPUB
| B | Webstore | |||
IEC 60055-1 am1 Ed. 4.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60055-1 am1 Ed. 5.0Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories | PPUB
| B | no | Webstore | ||
IEC 60055-2 Ed. 1.0Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements | PPUB
| B | Webstore | |||
IEC 60055-2 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60055-2 am2 Ed. 1.0Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements | PPUB
| B | no | Webstore | ||
IEC 60141-1 Ed. 3.0Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV | PPUB
| B | Webstore | |||
IEC 60141-1 am1 Ed. 3.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60141-1 am2 Ed. 3.0Amendment 2 | PPUB
| B | Webstore | |||
IEC 60141-1 am2 f2 Ed. 3.0Amendment to IEC 141-1 - Voltages up to and including 500 kV | MERGED
| E | 20A(U.K.)72 | |||
IEC 60141-2 Ed. 1.0Tests on oil-filled and gas-pressure cables and their accessories. Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV | PPUB
| B | Webstore | |||
IEC 60141-2 Ed. 2.0Systematic review of IEC 141-2 (1963) | DEL
| B | ||||
IEC 60141-2 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60141-3 Ed. 1.0Tests on oil-filled and gas-pressure cables and their accessories. Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV | PPUB
| B | Webstore | |||
IEC 60141-3 Ed. 2.0Systematic review of IEC 141-3 (1963) | DEL
| B | ||||
IEC 60141-3 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60141-4 Ed. 1.0Tests on oil-filled and gas-pressure cables and their accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV | PPUB
| B | Webstore | |||
IEC 60141-4 Ed. 2.0Systematic review of IEC 141-4 (1980) | DEL
| B | ||||
IEC 60141-4 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60173 Ed. 1.0Colours of the cores of flexible cables and cords
| WPUB
| B | ||||
IEC 60173 Ed. 2.0Systematic review of IEC 173 Ed.1 (1964)
| DEL
| B | ||||
IEC 60183 Ed. 2.0Guide to the selection of high-voltage cables | PPUB
| B | Webstore | |||
IEC 60183 Ed. 3.0Guide to the selection of high-voltage a.c. cable systems | ACDV
| B | 2014-03 | no | ||
IEC 60183 f1 Ed. 3.0Systematic review of IEC 183 (1984) | DEL
| B | ||||
IEC 60183 am1 Ed. 2.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60227-1 Ed. 2.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements | DELPUB
| B | 1991-07 | |||
IEC 60227-1 Ed. 2.2Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements | DELPUB
| B | ||||
IEC 60227-1 Ed. 3.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
| PPUB
| B | 2007-11 | no | Webstore | |
IEC 60227-1 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 1995-11 | |||
IEC 60227-1 am2 Ed. 2.0Amendment 2 | DELPUB
| B | 1997-12 | |||
IEC 60227-2 Ed. 1.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 2: Test methods | DELPUB
| B | ||||
IEC 60227-2 Ed. 2.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods | PPUB
| B | Webstore | |||
IEC 60227-2 Ed. 2.1Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V - Part 2: Test methods | PPUB
| B | Webstore | |||
IEC 60227-2 fC1 Ed. 2.0Corrigendum 1 | PPUB
| B | Webstore | |||
IEC 60227-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60227-2 am1 Ed. 2.0Amendment 1 | PPUB
| B | no | Webstore | ||
IEC 60227-2 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60227-2 am2 Ed. 2.0Amendment 2 to IEC 60227-2 Ed.2.0: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
| DEL
| B | ||||
IEC 60227-3 Ed. 2.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring | PPUB
| B | Webstore | |||
IEC 60227-3 Ed. 2.1Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring | PPUB
| B | Webstore | |||
IEC 60227-3 am1 Ed. 2.0Amendment No. 1
| PPUB
| B | Webstore | |||
IEC 60227-4 Ed. 2.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring | PPUB
| B | Webstore | |||
IEC 60227-4 Ed. 2.1Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring | PPUB
| B | Webstore | |||
IEC 60227-4 am1 Ed. 2.0Amendment No. 1
| PPUB
| B | Webstore | |||
IEC 60227-5 Ed. 1.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 5: Flexible cables (cords) | DELPUB
| B | ||||
IEC 60227-5 Ed. 2.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) | DELPUB
| B | 1997-06 | |||
IEC 60227-5 Ed. 2.1Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) | DELPUB
| B | ||||
IEC 60227-5 Ed. 2.2Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) | DELPUB
| B | ||||
IEC 60227-5 Ed. 3.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
| PPUB
| B | 2011-10 | no | Webstore | |
IEC 60227-5 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60227-5 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 1997-12 | |||
IEC 60227-5 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60227-5 am2 Ed. 2.0Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) | DELPUB
| B | 2003-07 | no | ||
IEC 60227-6 Ed. 2.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 6: Lift cables and cables for flexible connections | DELPUB
| B | ||||
IEC 60227-6 Ed. 3.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections | PPUB
| B | Webstore | |||
IEC 60227-6 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60227-7 Ed. 1.0Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors | PPUB
| B | Webstore | |||
IEC 60227-7 Ed. 1.1Polyvinyl chloride insulated cables of rated voltages up to and
including 450/750 V - Part 7: Flexible cables screened and
unscreened with two or more conductors | PPUB
| B | Webstore | |||
IEC 60227-7 Ed. 1.2Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors | PPUB
| B | Webstore | |||
IEC 60227-7 am1 Ed. 1.0Amendment 1 | PPUB
| B | no | Webstore | ||
IEC 60227-7 am2 Ed. 1.0Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors | PPUB
| B | 2011-10 | no | Webstore | |
IEC 60228 Ed. 2.0Conductors of insulated cables | DELPUB
| B | ||||
IEC 60228 Ed. 3.0Conductors of insulated cables | PPUB
| B | yes | Webstore | ||
IEC 60228 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 20A(C.O.)145 | |||
DEL 60229 Ed. 3.0Systematic review of IEC 229 (1982) | DEL
| B | ||||
IEC 60229 Ed. 2.0Tests on cable oversheaths which have a special protective function and are applied by extrusion | DELPUB
| B | ||||
IEC 60229 Ed. 3.0Electric cables - Tests on extruded oversheaths with a special protective function | PPUB
| B | 2007-11 | no | Webstore | |
IEC 60230 Ed. 1.0Impulse tests on cables and their accessories | PPUB
| B | Webstore | |||
IEC 60230 Ed. 2.0Systematic review of IEC 230 (1966) | DEL
| B | ||||
IEC 60245-1 Ed. 3.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements | DELPUB
| B | ||||
IEC 60245-1 Ed. 3.2Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements | DELPUB
| B | ||||
IEC 60245-1 Ed. 4.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements | PPUB
| B | no | Webstore | ||
IEC 60245-1 Ed. 4.1Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements | PPUB
| B | Webstore | |||
IEC 60245-1 am1 Ed. 3.0Amendment No. 1
| DELPUB
| B | ||||
IEC 60245-1 am1 Ed. 4.0Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
| PPUB
| B | 2007-11 | no | Webstore | |
IEC 60245-1 am2 Ed. 3.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60245-2 Ed. 2.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods | PPUB
| B | Webstore | |||
IEC 60245-2 Ed. 2.2Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods | PPUB
| B | Webstore | |||
IEC 60245-2 am1 Ed. 2.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60245-2 am2 Ed. 2.0Amendment No. 2 | PPUB
| B | Webstore | |||
IEC 60245-2 am3 Ed. 2.0Amendment 3 to IEC 60245-2 Ed.2.0: Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
| DEL
| B | ||||
IEC 60245-3 Ed. 2.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables | PPUB
| B | Webstore | |||
IEC 60245-3 am1 Ed. 2.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60245-3 am2 Ed. 2.0Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables | PPUB
| B | 2011-10 | no | Webstore | |
IEC 60245-4 Ed. 2.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables | DELPUB
| B | 1992-11 | |||
IEC 60245-4 Ed. 2.2Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables | DELPUB
| B | ||||
IEC 60245-4 Ed. 3.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables | PPUB
| B | 2011-10 | no | Webstore | |
IEC 60245-4 am1 Ed. 2.0Amendment No. 1
| DELPUB
| B | 1997-06 | |||
IEC 60245-4 am2 Ed. 2.0Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables | DELPUB
| B | 2004-05 | no | ||
IEC 60245-5 Ed. 2.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables | PPUB
| B | Webstore | |||
IEC 60245-5 am1 Ed. 2.0Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables | PPUB
| B | no | Webstore | ||
IEC 60245-6 Ed. 2.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables | PPUB
| B | Webstore | |||
IEC 60245-6 am1 Ed. 2.0Amendment No. 1
| PPUB
| B | Webstore | |||
IEC 60245-6 am2 Ed. 2.0Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables | PPUB
| B | no | Webstore | ||
IEC 60245-7 Ed. 1.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables | PPUB
| B | Webstore | |||
IEC 60245-7 am1 Ed. 1.0Amendment No. 1
| PPUB
| B | Webstore | |||
IEC 60245-8 Ed. 1.0Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility | PPUB
| B | Webstore | |||
IEC 60245-8 Ed. 1.1Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility | PPUB
| B | Webstore | |||
IEC 60245-8 Ed. 1.2Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility | PPUB
| B | Webstore | |||
IEC 60245-8 am1 Ed. 1.0Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility | PPUB
| B | no | Webstore | ||
IEC 60245-8 am2 Ed. 1.0Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility | PPUB
| B | 2011-10 | no | Webstore | |
IEC 60287 Ed. 2.0Calculation of the continuous current rating of cables (100% load factor) | DELPUB
| B | ||||
IEC 60287 am1 f1 Ed. 2.0Amendment to IEC 287 - Skin and proximity effects for aluminium conductors | DEL
| B | 20A(Sec.)199 | |||
IEC 60287 am1 f2 Ed. 2.0Amendment to IEC 287 - To add paper-polypropylene-paper insulation in Tables III and IV | MERGED
| E | 20A(CA)59 | |||
IEC 60287 am1 f3 Ed. 2.0Amendment to IEC 287 - To change the factor for skin and
proximity effects in pipe type cables from 1.7 to 1.5
| MERGED
| E | ||||
IEC 60287 am2 f2 Ed. 2.0Reorganization of IEC 287 into smaller parts | DEL
| B | 20A(Sec.)207 | |||
IEC 60287 am3 Ed. 2.0Amendment No. 3 | DELPUB
| B | ||||
IEC 60287-1-1 Ed. 1.0Electric cables - Calculation of the current rating - Part 1: Current rating equations (100% load factor) and calculation of losses - Section 1: General | DELPUB
| B | ||||
IEC 60287-1-1 Ed. 1.2Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General | DELPUB
| B | ||||
IEC 60287-1-1 Ed. 2.0Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General | PPUB
| B | 2007-01 | no | Webstore | |
IEC 60287-1-1 fC1 Ed. 1.2Corrigendum 1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General | DELPUB
| B | 2006-08 | |||
IEC 60287-1-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60287-1-1 am1 Ed. 2.0Amendment to IEC 60287-1-1 Ed.2: Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
| 1CD
| E | 2014-10 | no | ||
IEC 60287-1-1 am2 Ed. 1.0Amendment 2 | DELPUB
| B | no | |||
IEC 60287-1-2 Ed. 1.0Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation | PPUB
| B | Webstore | |||
IEC 60287-1-3 Ed. 1.0Electric cables - Calculation of the current rating -
Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
| PPUB
| B | 1998-06 | no | Webstore | |
IEC 60287-2-1 Ed. 1.0Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 1: Calculation of thermal resistance | PPUB
| B | Webstore | |||
IEC 60287-2-1 Ed. 1.1Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance | PPUB
| B | Webstore | |||
IEC 60287-2-1 Ed. 1.2Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance | PPUB
| B | Webstore | |||
IEC 60287-2-1 am1 Ed. 1.0Amendment 1 | PPUB
| B | no | Webstore | ||
IEC 60287-2-1 am2 Ed. 1.0Amendment 2 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance | PPUB
| B | 2006-03 | no | Webstore | |
IEC 60287-2-1 am2 fC1 Ed. 1.0Corrigendum 1 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of the thermal resistance | PPUB
| B | Webstore | |||
IEC 60287-2-1 am3 Ed. 1.0Amendment 3 to IEC 60287-2-1 Ed.1: Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of the thermal resistance | 1CD
| E | 2014-10 | no | ||
IEC 60287-2-2 Ed. 1.0Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation | PPUB
| B | Webstore | |||
IEC 60287-3-1 Ed. 1.0Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 1: Reference operating conditions and selection of cable type | PPUB
| B | 1995-06 | Webstore | ||
IEC 60287-3-1 Ed. 1.1Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type | PPUB
| B | Webstore | |||
IEC 60287-3-1 am1 Ed. 1.0Amendment 1 | PPUB
| B | Webstore | |||
IEC 60287-3-2 Ed. 1.0Electric cables - Calculation of the current rating - Part 3:
Sections on operating conditions - Section 2: Economic
optimization of power cable size
| DELPUB
| B | 1995-06 | |||
IEC 60287-3-2 Ed. 2.0Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size | PPUB
| B | 2012-06 | no | Webstore | |
IEC 60287-3-2 am1 Ed. 1.0Amendment No. 1
| DELPUB
| B | 1996-10 | |||
IEC 60287-3-3 Ed. 1.0Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources
| PPUB
| B | 2007-06 | no | Webstore | |
IEC 60331 Ed. 1.0Fire-resisting characteristics of electric cables | DELPUB
| B | ||||
IEC 60331-1 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm | PPUB
| B | 2009-06 | no | Webstore | |
IEC 60331-2 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm | PPUB
| B | 2009-06 | no | Webstore | |
IEC 60331-3 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure | PPUB
| B | 2009-06 | no | Webstore | |
IEC 60331-11 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C | PPUB
| B | Webstore | |||
IEC 60331-11 Ed. 1.1Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C | PPUB
| B | Webstore | |||
IEC 60331-11 am1 Ed. 1.0Amendment 1 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C | PPUB
| B | 2009-05 | no | Webstore | |
IEC 60331-12 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 12: Apparatus - Fire with shock at a temperature of at least 830 °C | DELPUB
| B | 2002-09 | no | ||
IEC 60331-21 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV | PPUB
| B | Webstore | |||
IEC 60331-21 am1 Ed. 1.0Amendment 1 to IEC 60331-21: Tests for electric cables under fire conditions - circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV | DEL
| E | 2008-06 | no | ||
IEC 60331-23 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables | PPUB
| B | Webstore | |||
IEC 60331-23 am1 Ed. 1.0Amemdment 1 to IEC 60331-23, Ed 1, Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables | DEL
| E | 2008-06 | no | 20/820 | |
IEC 60331-25 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables | PPUB
| B | Webstore | |||
IEC 60331-25 am1 Ed. 1.0Amendment 1 IEC 60331-25, Ed 1, Tests for electric cables under fire conditions - Circuit integrity - Part 25: Procedures and requirements - Optical fibre cables | DEL
| E | 2008-06 | no | 20/821 | |
IEC 60331-31 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0,6/1 kV | DELPUB
| B | 2002-09 | no | ||
IEC 60331-31 Ed. 2.0Tests for electric cables under fire conditions - circuit integrity - Part 31: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm | MERGED
| E | 2008-06 | no | ||
IEC 60331-32 Ed. 1.0Tests for electric cables under fire conditions - Circuit integrity - Part 32: Procedures and requirements for fire with shock - Cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm | MERGED
| E | 2008-08 | no | ||
IEC 60332-1 Ed. 3.0Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable | DELPUB
| B | ||||
IEC 60332-1-1 Ed. 1.0Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus | PPUB
| B | 2004-06 | yes | Webstore | |
IEC 60332-1-1 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus | 1CD
| E | 2014-10 | |||
IEC 60332-1-2 Ed. 1.0Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame | PPUB
| B | 2004-06 | yes | Webstore | |
IEC 60332-1-2 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame | 1CD
| E | 2014-10 | |||
IEC 60332-1-3 Ed. 1.0Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles | PPUB
| B | 2004-06 | yes | Webstore | |
IEC 60332-1-3 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles | 1CD
| E | 2014-10 | |||
IEC 60332-2 Ed. 1.0Tests on electric cables under fire conditions. Part 2: Test on a single small vertical insulated copper wire or cable | DELPUB
| B | ||||
IEC 60332-2 Ed. 2.0Systematic review of IEC 332-2 (1989) | DEL
| B | ||||
IEC 60332-2-1 Ed. 1.0Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus | PPUB
| B | 2004-06 | yes | Webstore | |
IEC 60332-2-2 Ed. 1.0Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame | PPUB
| B | 2004-06 | yes | Webstore | |
IEC/TS 60332-3 Ed. 2.0Tests on electric cables under fire conditions - Part 3: Tests on bunched wires or cables | DELPUB
| B | 20C(C.O.)3 | |||
IEC 60332-3-10 Ed. 1.0Tests on electric cables and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
| PPUB
| B | 1998-12 | Webstore | ||
IEC 60332-3-10 Ed. 1.1Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus | PPUB
| B | Webstore | |||
IEC 60332-3-10 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
| PPUB
| B | 2009-01 | no | Webstore | |
IEC 60332-3-21 Ed. 1.0Tests on electric cables under fire conditions - Part 3-21: Test
for vertical flame spread of vertically-mounted bunched wires or
cables - Category A F/R | PPUB
| B | 1998-12 | Webstore | ||
IEC 60332-3-22 Ed. 1.0Tests on electric cables and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | PPUB
| B | 1998-12 | Webstore | ||
IEC 60332-3-22 Ed. 1.1Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | PPUB
| B | Webstore | |||
IEC 60332-3-22 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
| PPUB
| B | 2009-01 | no | Webstore | |
IEC 60332-3-23 Ed. 1.0Tests on electric cables and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B | PPUB
| B | 1998-12 | Webstore | ||
IEC 60332-3-23 Ed. 1.1Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B | PPUB
| B | Webstore | |||
IEC 60332-3-23 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
| PPUB
| B | 2009-01 | no | Webstore | |
IEC 60332-3-24 Ed. 1.0Tests on electric cables and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C | PPUB
| B | 1998-12 | Webstore | ||
IEC 60332-3-24 Ed. 1.1Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C | PPUB
| B | Webstore | |||
IEC 60332-3-24 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
| PPUB
| B | 2009-01 | no | Webstore | |
IEC 60332-3-25 Ed. 1.0Tests on electric cables and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D | PPUB
| B | 1998-12 | Webstore | ||
IEC 60332-3-25 Ed. 1.1Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D | PPUB
| B | Webstore | |||
IEC 60332-3-25 am1 Ed. 1.0Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
| PPUB
| B | 2009-01 | no | Webstore | |
IEC 60502 Ed. 4.0Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV | DELPUB
| B | ||||
IEC 60502-1 Ed. 1.0Power cables with extruded insulation and their accessories for
rated voltages from 1kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) -
Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV
(Um = 3,6 kV)
| DELPUB
| B | ||||
IEC 60502-1 Ed. 1.1Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | DELPUB
| B | ||||
IEC 60502-1 Ed. 2.0Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | PPUB
| B | no | Webstore | ||
IEC 60502-1 Ed. 2.1Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
| PPUB
| B | Webstore | |||
IEC 60502-1 am1 Ed. 1.0Amendment 1 | DELPUB
| B | ||||
IEC 60502-1 am1 Ed. 2.0Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | PPUB
| B | 2009-10 | no | Webstore | |
DEL 60502-1 am2 Ed. 1.0Amendment No. 2 to IEC 60502-1 | DEL
| E | ||||
IEC 60502-2 Ed. 1.0Power cables with extruded insulation and their accessories for
rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) -
Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to
30 kV (Um = 36 kV)
| DELPUB
| B | ||||
IEC 60502-2 Ed. 1.1Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | DELPUB
| B | ||||
IEC 60502-2 Ed. 2.0Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | PPUB
| B | no | Webstore | ||
IEC 60502-2 fC1 Ed. 1.0Corrigendum 1 | DELPUB
| F | ||||
IEC 60502-2 am1 Ed. 1.0Amendment 1 | DELPUB
| B | ||||
IEC 60502-2 am1 Ed. 2.0Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | ADIS
| B | 2013-06 | no | ||
DEL 60502-2 am2 Ed. 1.0Amendment No. to IEC 60502-2 | DEL
| E | ||||
IEC 60502-3 am1 Ed. 1.0Further amendments to IEC 502-1 and IEC 502-2
| DEL
| E | ||||
IEC 60502-4 Ed. 1.0Power cables with extruded insulation and their accessories for
rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV)
- Part 4: Test requirements on accessories for cables with rated
voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
| DELPUB
| B | ||||
IEC 60502-4 Ed. 2.0Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | DELPUB
| B | 2005-03 | no | ||
IEC 60502-4 Ed. 3.0Power cables with extruded insulation and their accessories for rated voltages from 1 kV (U<sub>m</sub> = 1,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (U<sub>m</sub> = 7,2 kV) up to 30 kV (U<sub>m</sub> = 36 kV)
| PPUB
| B | 2011-01 | no | Webstore | |
IEC 60541 Ed. 1.0Comparative information on IEC and North-American flexible cord
types
| WPUB
| B | ||||
IEC 60541 Ed. 2.0Systematic review of IEC 541 (1976) | DEL
| B | ||||
IEC 60702-1 Ed. 2.0Mineral insulated cables with a rated voltage not exceeding 750 V. Part 1: Cables | DELPUB
| B | ||||
IEC 60702-1 Ed. 3.0Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables | PPUB
| B | yes | Webstore | ||
IEC 60702-1 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60702-1 am1 Ed. 3.0Amendment 1 to IEC 60702-1 Ed.3: Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
| 1CD
| E | 2014-06 | yes | ||
IEC 60702-2 Ed. 1.0Mineral insulated cables with a rated voltage not exceeding 750 V. Part 2: Terminations | DELPUB
| B | ||||
IEC 60702-2 Ed. 2.0Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations | PPUB
| B | yes | Webstore | ||
IEC 60702-2 am1 Ed. 2.0Amendment 1 to IEC 60702-2 Ed.2: Mineral insulated cables and
their terminations with a rated voltage not exceeding 750 V -
Part 2: Terminations | 1CD
| E | 2014-06 | yes | ||
IEC 60702-3 Ed. 1.0Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guide to use
| ANW
| E | 2014-12 | 20/1391 | ||
IEC 60719 Ed. 2.0Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V | PPUB
| B | Webstore | |||
IEC 60724 Ed. 2.0Guide to the short-circuit temperature limits of electric cables with a rated voltage not exceeding 0.6/1.0 kV | DELPUB
| B | ||||
IEC 60724 Ed. 3.0Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
| PPUB
| B | Webstore | |||
IEC 60724 Ed. 3.1Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
| PPUB
| B | Webstore | |||
IEC 60724 am1 Ed. 2.0Amendment No. 1
| DELPUB
| B | ||||
IEC 60724 am1 Ed. 3.0Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) | PPUB
| B | 2008-10 | no | Webstore | |
IEC 60724 am2 Ed. 2.0Amendments to IEC 724 - Temperature of oversheaths | DEL
| E | ||||
IEC 60754-1 Ed. 2.0Test on gases evolved during combustion of materials from cables - Part 1: Determination of the amount of halogen acid gas | DELPUB
| B | 1992-12 | |||
IEC 60754-1 Ed. 3.0Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content | PPUB
| B | 2011-12 | no | Webstore | |
IEC 60754-2 Ed. 1.0Test on gases evolved during combustion of electric cables -
Part 2: Determination of degree of acidity of gases evolved
during the combustion of materials taken from electric cables by
measuring pH and conductivity
| DELPUB
| B | ||||
IEC 60754-2 Ed. 2.0Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity | PPUB
| B | 2011-12 | no | Webstore | |
IEC 60754-2 am1 Ed. 1.0Amendment No. 1
| DELPUB
| B | 1997-04 | |||
IEC 60800 Ed. 2.0Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation | DELPUB
| B | 1991-07 | |||
IEC 60800 Ed. 3.0Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation | PPUB
| B | 2009-08 | no | Webstore | |
IEC 60800 fC1 Ed. 3.0Corrigendum 1 - Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation | PPUB
| B | Webstore | |||
IEC 60811 am1 Ed. 1.0Amendment to IEC 811 - Addition of the words 'and optical' to the title and scope of each part and section of IEC 811 | DEL
| E | 20(Sec.)287 | |||
IEC 60811-1-1 Ed. 2.0Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties | DELPUB
| B | 1993-06 | |||
IEC 60811-1-1 Ed. 2.1Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties | DELPUB
| B | ||||
IEC 60811-1-1 am1 Ed. 2.0Amendment 1 to IEC 60811-1-1, Ed.2
| DELPUB
| B | 2001-04 | yes | ||
IEC 60811-1-2 Ed. 1.0Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods | DELPUB
| B | ||||
IEC 60811-1-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60811-1-2 am2 Ed. 1.0Amendment 2
| DELPUB
| B | 2000-08 | yes | ||
IEC 60811-1-3 Ed. 2.0Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density - Water absorption tests - Shrinkage test | DELPUB
| B | ||||
IEC 60811-1-3 Ed. 2.1Common test methods for insulating and sheathing materials of electric and optical cables - Part 1-3: General application -Methods for determining the density - Water absorption tests - Shrinkage test | DELPUB
| B | ||||
IEC 60811-1-3 am1 Ed. 2.0Amendment 1 | DELPUB
| B | 2001-06 | yes | ||
IEC 60811-1-4 Ed. 1.0Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Test at low temperature | DELPUB
| B | ||||
IEC 60811-1-4 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 1993-06 | |||
IEC 60811-1-4 am2 Ed. 1.0Amendment 2 | DELPUB
| B | 2001-08 | yes | ||
IEC 60811-2-1 Ed. 1.0Common test methods for insulating and sheathing materials of electric cables - Part 2: Methods specific to elastomeric compounds - Section One: Ozone resistance test - Hot set test - Mineral oil immersion test | DELPUB
| B | ||||
IEC 60811-2-1 Ed. 2.0Insulating and sheathing materials of electric and optical cables - Common test methods - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests | DELPUB
| B | 1998-04 | yes | ||
IEC 60811-2-1 Ed. 2.1Common test methods for insulating and sheathing materials of electric and optical cables - Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests | DELPUB
| B | ||||
IEC 60811-2-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 20(C.O.)198 | |||
IEC 60811-2-1 am1 Ed. 2.0Amendment 1 | DELPUB
| B | 2001-08 | yes | ||
IEC 60811-2-1 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60811-3-1 Ed. 1.0Common test methods for insulating and sheathing materials of
electric cables - Part 3: Methods specific to PVC compounds -
Section One: Pressure test at high temperature - Tests for
resistance to cracking
| DELPUB
| B | ||||
IEC 60811-3-1 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 1994-10 | |||
DEL 60811-3-1 am2 Ed. 1.0Amendment to Sub-clause 8.1.3 of IEC 811-3-1 | DEL
| E | 20(U.K.)168 | |||
IEC 60811-3-1 am2 Ed. 1.0Amendment 2 | DELPUB
| B | 2001-06 | yes | ||
IEC 60811-3-2 Ed. 1.0Common test methods for insulating and sheathing materials of electric cables - Part 3: Methods specific to PVC compounds - Section Two: Loss of mass test - Thermal stability test | DELPUB
| B | ||||
IEC 60811-3-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 1993-06 | |||
IEC 60811-3-2 am2 Ed. 1.0Amendment 2 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 3-2: Methods specific to PVC compounds - Loss of mass test - Thermal stability test | DELPUB
| B | 2004-01 | yes | ||
DEL 60811-4-1 Ed. 2.0Common test methods for insulating and sheathing materials of electric cables - Part 4: methods specific to polaethylene and polypropylene compounds - Sectin one - Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Measurement of the melt flow index - Carbon black and/or mineal content measurement in PE | MERGED
| B | ||||
IEC 60811-4-1 Ed. 1.0Common test methods for insulating and sheathing materials of electric cables - Part 4: Methods specific to polyethylene and polypropylene compounds - Section One - Resistance to environmental stress cracking - Wrapping test after thermal ageing in air - Measurement of the melt flow index | DELPUB
| B | ||||
IEC 60811-4-1 Ed. 2.0Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-1: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - Measurement of the melt flow index - Carbon black and/or mineral filler content measurement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope | DELPUB
| B | 2004-06 | yes | ||
IEC 60811-4-1 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
DEL 60811-4-2 Ed. 2.0Systematic review of IEC 811-4-2 (1990) | DEL
| B | ||||
IEC 60811-4-2 Ed. 1.0Common test methods for insulating and sheathing materials of electrical cables - Part 4: Methods specific to polyethylene and polypropylene compounds. Section Two: Elongation at break after pre-conditionning - Wrapping test after pre-conditionning - Wrapping test after thermal ageing in air | DELPUB
| B | ||||
IEC 60811-4-2 Ed. 2.0Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation
| DELPUB
| B | 2004-06 | yes | ||
IEC 60811-5-1 Ed. 1.0Common test methods for insulating and sheathing materials of el ectrical cables - Part 5: Methods specific to filling compounds - Section 1: Drop point - Separation of oil - Lower temperature brittleness - Total acid number -Absence of corrosive component s-Permittivity at 23 °C - D.C. resistivity at 23 °C and 100 °C | DELPUB
| B | ||||
IEC 60811-5-1 Ed. 1.1Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C | DELPUB
| B | ||||
IEC 60811-5-1 Ed. 2.0Systematic review of IEC 811-5-1 (1990) | DEL
| B | ||||
IEC 60811-5-1 am1 Ed. 1.0Amendment 1 - Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C | DELPUB
| B | 2004-01 | yes | ||
IEC 60811-100 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-201 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
| PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-202 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-203 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-301 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-302 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
| PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-401 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-402 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-403 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-404 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-405 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-406 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-407 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-408 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-409 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-410 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-411 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-412 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-501 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-502 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-503 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-504 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-505 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-506 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-507 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-508 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-509 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-510 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-511 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-512 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-513 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-601 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-602 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-603 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-604 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-605 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-606 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60811-607 Ed. 1.0Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene | PPUB
| B | 2012-03 | yes | Webstore | |
IEC 60840 Ed. 1.0Tests for power cables with extruded insulation for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) | DELPUB
| B | ||||
IEC 60840 Ed. 2.0Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements | DELPUB
| B | ||||
IEC 60840 Ed. 3.0Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements | DELPUB
| B | 2004-05 | no | ||
IEC 60840 Ed. 4.0Power cables with extruded insulation and their accessories for rated voltages above 30 kV (U<sub>m</sub> = 36 kV) up to 150 kV (U<sub>m</sub> = 170 kV) - Test methods and requirements | PPUB
| B | 2011-12 | no | Webstore | |
IEC 60840 am2 Ed. 1.0Amendment No. 2 | DELPUB
| B | ||||
IEC 60853-1 Ed. 1.0Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV | PPUB
| B | Webstore | |||
IEC 60853-1 am1 Ed. 1.0Amendment No. 1 | PPUB
| B | Webstore | |||
IEC 60853-1 am2 Ed. 1.0Amendment 2 - Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30 (36) kV | PPUB
| B | 2008-10 | no | Webstore | |
IEC 60853-2 Ed. 1.0Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages | PPUB
| B | Webstore | |||
IEC 60853-2 Ed. 2.0Systematic review of IEC 853-2 (1989) | DEL
| B | ||||
IEC 60853-2 am1 Ed. 1.0Amendment 1 - Calculation of the cyclic and emergency current rating of cables - Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages | PPUB
| B | 2008-10 | no | Webstore | |
IEC 60853-3 Ed. 1.0Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil | PPUB
| B | no | Webstore | ||
IEC 60885-1 Ed. 1.0Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V | WPUB
| B | ||||
IEC 60885-1 Ed. 2.0Systematic review of IEC 885-1 (1987) | DEL
| B | ||||
IEC 60885-2 Ed. 1.0Electrical test methods for electric cables. Part 2: Partial discharge tests | PPUB
| B | Webstore | |||
IEC 60885-2 Ed. 2.0Systematic review of IEC 885-2 (1987) | DEL
| B | ||||
IEC 60885-3 Ed. 1.0Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | PPUB
| B | Webstore | |||
IEC 60885-3 Ed. 2.0Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | 1CD
| E | 2013-12 | yes | ||
IEC 60885-3 f1 Ed. 2.0Systematic review of IEC 885-3 (1988) | MERGED
| B | ||||
IEC 60949 Ed. 1.0Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects | PPUB
| B | Webstore | |||
IEC 60949 Ed. 2.0Systematic review of IEC 949 (1988) | DEL
| B | ||||
IEC 60949 am1 Ed. 1.0Amendment 1 - Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects | PPUB
| B | 2008-10 | no | Webstore | |
IEC 60986 Ed. 1.0Guide to the short-circuit temperature limits of electric cables with a rated voltage from 1.8/3 (3.6) kV to 18/30 (36) kV | DELPUB
| B | ||||
IEC 60986 Ed. 2.0Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
| PPUB
| B | Webstore | |||
IEC 60986 Ed. 2.1Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | PPUB
| B | Webstore | |||
IEC 60986 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | ||||
IEC 60986 am1 Ed. 2.0Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | PPUB
| B | 2008-10 | no | Webstore | |
IEC 61034-1 Ed. 1.0Measurement of smoke density of electric cables burning under defined conditions - Part 1: Test apparatus | DELPUB
| B | ||||
IEC 61034-1 Ed. 2.0Measurement of smoke density of cables burning under defined conditions - Part 1 Test apparatus
| DELPUB
| B | ||||
IEC 61034-1 Ed. 3.0Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus | PPUB
| B | yes | Webstore | ||
IEC 61034-1 am1 Ed. 3.0Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus | CDIS
| B | 2013-06 | yes | ||
IEC 61034-2 Ed. 2.0Measurement of smoke density of cables burning under defined
conditions - Part 2: Test procedure and requirements | DELPUB
| B | ||||
IEC 61034-2 Ed. 3.0Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements | PPUB
| B | yes | Webstore | ||
IEC 61034-2 fC1 Ed. 3.0Corrigendum 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
| PPUB
| B | Webstore | |||
IEC/TS 61034-2 Ed. 1.0Measurement of smoke density of electric cables burning under defined conditions - Part 2: Test procedure and requirements | DELPUB
| B | ||||
IEC 61034-2 am1 Ed. 3.0Amendment - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements | CDIS
| B | 2013-06 | yes | ||
IEC/TS 61034-2 am1 Ed. 1.0Amendment No. 1 | DELPUB
| B | 20C(C.O.)10 | |||
IEC 61042 Ed. 1.0A method for calculating reduction factors for groups of cables in free air, protected from solar radiation | DELPUB
| B | ||||
IEC 61059 Ed. 1.0Economic optimization of power cable size | DELPUB
| B | ||||
IEC 61138 Ed. 2.0Cables for portable earthing and short-circuiting equipment | DELPUB
| B | 1992-09 | |||
IEC 61138 Ed. 3.0Cables for portable earthing and short-circuiting equipment
| PPUB
| B | 2007-08 | yes | Webstore | |
IEC 61138 am1 Ed. 2.0Amendment No. 1 | DELPUB
| B | 1995-04 | |||
IEC 61238-1 Ed. 1.0Compression and mechanical connectors for power cables with copper or aluminium conductors - Part 1: Test methods and requirements | DELPUB
| B | 20(C.O.)199 | |||
IEC 61238-1 Ed. 2.0Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements | PPUB
| B | yes | Webstore | ||
IEC/TS 61238-2 Ed. 1.0Compression and mechanical connectors for power cables with
copper or aluminium conductors - Part 2: Terminal lugs for power
cables to fit equipment up to and including 1 kV - Overall
dimensions
| WPUB
| B | ||||
IEC 61423-1 Ed. 2.0Heating cables for industrial applications - Part 1: Performance
requirements and test methods
| DEL
| B | ||||
IEC/TS 61423-1 Ed. 1.0Heating cables for industrial applications - Part 1: Performance requirements and test methods | WPUB
| B | 1995-03 | |||
IEC 61423-2 Ed. 2.0Heating cables for industrial applications - Part 2:
Constructional and material requirements
| DEL
| B | ||||
IEC/TS 61423-2 Ed. 1.0Heating cables for industrial applications - Part 2: Constructional and material requirements | WPUB
| B | 1995-03 | 20B(Sec.)120 | ||
IEC 61442 Ed. 1.0Electric cables - Test methods for accessories for power cables
with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um =
36 kV)
| DELPUB
| B | ||||
IEC 61442 Ed. 2.0Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) | PPUB
| B | 2004-12 | yes | Webstore | |
IEC 61443 Ed. 1.0Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV) | PPUB
| B | Webstore | |||
IEC 61443 Ed. 1.1Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV) | PPUB
| B | Webstore | |||
IEC 61443 am1 Ed. 1.0Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
| PPUB
| B | 2008-10 | no | Webstore | |
IEC 61444 Ed. 1.0Tabulated ratings for paper insulated cables | DEL
| E | ||||
IEC 61833 Ed. 1.0Test methods for electrical connectors for aerial bundled cables | DEL
| E | 20(NO)125 | |||
IEC/TR 61901 Ed. 1.0Development tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) | PPUB
| B | no | Webstore | ||
IEC 62067 Ed. 1.0Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements | DELPUB
| B | 2001-11 | no | ||
IEC 62067 Ed. 1.1Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements | DELPUB
| B | ||||
IEC 62067 Ed. 2.0Power cables with extruded insulation and their accessories for rated voltages above 150 kV (<i>U</i><sub>m</sub> = 170 kV) up to 500 kV (<i>U</i><sub>m</sub> = 550 kV) - Test methods and requirements | PPUB
| B | 2011-12 | no | Webstore | |
IEC 62067 am1 Ed. 1.0Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
| DELPUB
| B | 2006-01 | no | ||
IEC/TR 62095 Ed. 1.0Electric cables - Calculations for current ratings - Finite element method | PPUB
| B | no | Webstore | ||
IEC/TS 62100 Ed. 1.0Cables for aeronautical ground lighting primary circuits | PPUB
| B | 2000-12 | no | Webstore | |
IEC/TR 62125 Ed. 1.0Environmental statement specific to IEC TC 20 - Electric cables | PPUB
| B | 2007-11 | no | Webstore | |
IEC 62230 Ed. 1.0Electric cables - Spark-test method | PPUB
| B | 2006-06 | no | Webstore | |
IEC 62230 am1 Ed. 1.0Amendment 1 - Electric cables - Spark-test method | CCDV
| B | 2014-03 | yes | ||
IEC 62440 Ed. 1.0Electric cables with a rated voltage not exceeding 450/750 V - Guide to use | PPUB
| B | 2008-02 | no | Webstore | |
IEC/TR 62602 Ed. 1.0Conductors of insulated cables - Data for AWG and KCMIL sizes | PPUB
| B | 2009-10 | no | Webstore | |
IEC 62821-1 Ed. 1.0Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: general requirements | ACDV
| E | 2014-09 | no | ||
IEC 62821-2 Ed. 1.0Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: Test methods
| ACDV
| E | 2014-09 | no | ||
IEC 62821-3 Ed. 1.0Halogen free low smoke thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords)
| ACDV
| E | 2014-09 | no | ||
IEC 60228A Ed. 2.0First supplement | DELPUB
| B |
145 kB